- 07 Dec, 2006 40 commits
-
-
Siddha, Suresh B authored
Move the irqbalance quirks for E7320/E7520/E7525(Errata 23 in http://download.intel.com/design/chipsets/specupdt/30304203.pdf) to early quirks. And add a PCI quirk for these platforms to check(which happens very late during the boot) if the APIC routing is indeed set to default flat mode. This fixes the breakage(in x86_64) of this quirk due to cpu hotplug which selects physical mode instead of the logical flat(as needed for this errata workaround). Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Signed-off-by:
Andrew Morton <akpm@osdl.org>
-
Siddha, Suresh B authored
Add genapic_force. Used by the next Intel quirks patch. Signed-off-by:
-
Siddha, Suresh B authored
Change the 'no_control' field in the cpu struct to a more positive and better term 'hotpluggable'. And change(/cleanup) the logic accordingly. Signed-off-by:
-
Siddha, Suresh B authored
Add 'enable_cpu_hotplug' flag and when cleared, the hotplug control file ("online") will not be added under /sys/devices/system/cpu/cpuX/ Next patch doing PCI quirks will use this. Signed-off-by: -
Siddha, Suresh B authored
Mechanism of selecting physical mode in genapic when cpu hotplug is enabled on x86_64, broke the quirk(quirk_intel_irqbalance()) introduced for working around the transposing interrupt message errata in E7520/E7320/E7525 (revision ID 0x9 and below. errata #23 in http://download.intel.com/design/chipsets/specupdt/30304203.pdf). This errata requires the mode to be in logical flat, so that interrupts can be directed to more than one cpu(and thus use hardware IRQ balancing enabled by BIOS on these platforms). Following four patches fixes this by moving the quirk to early quirk and forcing the x86_64 genapic selection to logical flat on these platforms. Thanks to Shaohua for pointing out the breakage. This patch: Add write_pci_config_byte() to direct PCI access routines Signed-off-by:
-
Vivek Goyal authored
o Convert more absolute symbols to section relative to keep the theme in vmlinux.lds.S file and to avoid problem if kernel is relocated. o Also put a message so that in future people can be aware of it and avoid introducing absolute symbols. Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
-
Vivek Goyal authored
o On some platforms like avr32, section init comes before .text and not necessarily a symbol's relative position w.r.t _text is positive. In such cases assembler detects the overflow and emits warning. This patch fixes it. Signed-off-by:
-
Adrian Bunk authored
Make the needlessly global alloc_gdt() static. (against) pda-percpu-init Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Jan Beulich authored
Until not so long ago, there were system log messages pointing to inconsistent MTRR setup of the video frame buffer caused by the way vesafb and X worked. While vesafb was fixed meanwhile, I believe fixing it there only hides a shortcoming in the MTRR code itself, in that that code is not symmetric with respect to the ordering of attempts to set up two (or more) regions where one contains the other. In the current shape, it permits only setting up sub-regions of pre-exisiting ones. The patch below makes this symmetric. While working on that I noticed a few more inconsistencies in that code, namely - use of 'unsigned int' for sizes in many, but not all places (the patch is converting this to use 'unsigned long' everywhere, which specifically might be necessary for x86-64 once a processor supporting more than 44 physical address bits would become available) - the code to correct inconsistent settings during secondary processor startup tried (if necessary) to correct, among other things, the value in IA32_MTRR_DEF_TYPE, however the newly computed value would never get used (i.e. stored in the respective MSR) - the generic range validation code checked that the end of the to-be-added range would be above 1MB; the value checked should have been the start of the range - when contained regions are detected, previously this was allowed only when the old region was uncacheable; this can be symmetric (i.e. the new region can also be uncacheable) and even further as per Intel's documentation write-trough and write-back for either region is also compatible with the respective opposite in the other Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Jan Beulich authored
Make pmd_bad() symmetrical to pgd_bad() and pud_bad(). At once, simplify them all. TBD: tighten down the checks again as suggested by Hugh D. Signed-off-by:
-
Jan Beulich authored
Avoid inclusion of code that's dead for x86-64. Signed-off-by:
-
Jan Beulich authored
The function doesn't exist (anymore). Signed-off-by:
-
Jan Beulich authored
Just like on x86-64, don't touch foreign CPUs' memory if the watchdog isn't enabled at all. Signed-off-by:
-
Jan Beulich authored
While not strictly required with the current code (as the upper half of page table entries generated by __set_fixmap() cannot be non-zero due to the second parameter of this function being 'unsigned long'), the use of set_pte() in __set_fixmap() in the context of clear_fixmap() is still improper with CONFIG_X86_PAE (see the respective comment in include/asm-i386/pgtable-3level.h) and would turn into a bug if that second parameter ever gets changed to a 64-bit type. Signed-off-by:
-
Andi Kleen authored
Signed-off-by: -
Ernie Petrides authored
The final line of /proc/<pid>/maps on x86_64 for native 64-bit tasks shows an incorrect ending address and incorrect permissions. There is only a single page mapped in this vsyscall region, and it is accessible for both read and execute. The patch below fixes this. (Since 32-bit-compat tasks have a real vma with correct perms/range, no change is necessary for that scenario.) Before the patch, a "cat /proc/self/maps | tail -1" shows this: ffffffffff600000-ffffffffffe00000 ---p 00000000 [...] After the patch, this is the output: ffffffffff600000-ffffffffff601000 r-xp 00000000 [...] Signed-off-by:Ernie Petrides <petrides@redhat.com> Signed-off-by:
-
Andi Kleen authored
gcc doesn't support -mtune=core2 yet, but will be soon. Use -mtune=generic or -mtune=i686 as fallback TBD need benchmarking for INTEL_USERCOPY etc. So far I used the same defaults as MPENTIUMM Signed-off-by: -
Andi Kleen authored
Add an option to compile for Intel's Core 2 The Kconfig help is a mouthful due to the inventiveness of Intel's product naming department. Mainly for the 64bit cache line sizes because gcc doesn't support optimizing for core2 yet. However it will and then the kernel should be ready by passing the right option Also fix the old MPSC help text to confirm better to reality. Signed-off-by: -
Zachary Amsden authored
Add a way to disable the timer IRQ routing check via a boot option. The VMI timer code uses this to avoid triggering the pester Mingo code, which probes for some very unusual and broken motherboard routings. It fires 100% of the time when using a paravirtual delay mechanism instead of using a realtime delay, since there is no elapsed real time, and the 4 timer IRQs have not yet been delivered. In addition, it is entirely possible, though improbable, that this bug could surface on real hardware which picks a particularly bad time to enter SMM mode, causing a long latency during one of the timer IRQs. While here, make check_timer be __init. Signed-off-by:
Zachary Amsden <zach@vmware.com> Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Zachary Amsden authored
The function ptep_get_and_clear uses an atomic instruction sequence to get and clear an active pte. Rather than add such an atomic operator to all virtual machine implementations in paravirt-ops, it is easier to support the raw atomic sequence and use either a trapping writable pagetable approach, or a post-update notification. For the post update notification, we require the pte_update function to be called after the access. Combine the 2-level and 3-level paging operators into one common function which does the post-update notification, and rename the actual atomic sequences to raw_ptep_xxx operators. Signed-off-by:
-
Zachary Amsden authored
Make parameter names match function argument names for the yet to be defined pte_update_defer accessor. Signed-off-by:
-
Zachary Amsden authored
Move header includes for the nopud / nopmd types to the location of the actual pte / pgd type definitions. This allows generic 4-level page type code to be written before the split 2/3 level page table headers are included. Signed-off-by:
-
Rusty Russell authored
BIOS ROM areas may not be mapped into the guest address space, so be careful when touching those addresses to make sure they appear to be mapped. [akpm@osdl.org: fix unused var warning] AK: Changed __get_user to probe_kernel_address Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Rusty Russell authored
Add the three bare TLB accessor functions to paravirt-ops. Most amusingly, flush_tlb is redefined on SMP, so I can't call the paravirt op flush_tlb. Instead, I chose to indicate the actual flush type, kernel (global) vs. user (non-global). Global in this sense means using the global bit in the page table entry, which makes TLB entries persistent across CR3 reloads, not global as in the SMP sense of invoking remote shootdowns, so the term is confusingly overloaded. AK: folded in fix from Zach for PAE compilation Signed-off-by:
-
Rusty Russell authored
Add APIC accessors to paravirt-ops. Unfortunately, we need two write functions, as some older broken hardware requires workarounds for Pentium APIC errata - this is the purpose of apic_write_atomic. AK: replaced __inline with inline Signed-off-by:
-
Rusty Russell authored
Two legacy power management modes are much easier to just explicitly disable when running in paravirtualized mode - neither APM nor PnP is still relevant. The status of ACPI is still debatable, and noacpi is still a common enough boot parameter that it is not necessary to explicitly disable ACPI. Signed-off-by:
-
Andi Kleen authored
They don't work together and this way even glibc still works. Signed-off-by: -
Rusty Russell authored
Allow selected bug checks to be skipped by paravirt kernels. The two most important are the F00F workaround (which is either done by the hypervisor, or not required), and the 'hlt' instruction check, which can break under some hypervisors. Signed-off-by:
-
Rusty Russell authored
1) Each hypervisor writes a probe function to detect whether we are running under that hypervisor. paravirt_probe() registers this function. 2) If vmlinux is booted with ring != 0, we call all the probe functions (with registers except %esp intact) in link order: the winner will not return. Signed-off-by:
-
Rusty Russell authored
Both lhype and Xen want to call the core of the x86 cpu detect code before calling start_kernel. (extracted from larger patch) AK: folded in start_kernel header patch Signed-off-by:
-
Rusty Russell authored
It turns out that the most called ops, by several orders of magnitude, are the interrupt manipulation ops. These are obvious candidates for patching, so mark them up and create infrastructure for it. The method used is that the ops structure has a patch function, which is called for each place which needs to be patched: this returns a number of instructions (the rest are NOP-padded). Usually we can spare a register (%eax) for the binary patched code to use, but in a couple of critical places in entry.S we can't: we make the clobbers explicit at the call site, and manually clobber the allowed registers in debug mode as an extra check. And: Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT. And: AK: Fix warnings in x86-64 alternative.c build And: AK: Fix compilation with defconfig And: ^From: Andrew Morton <akpm@osdl.org> Some binutlises still like to emit references to __stop_parainstructions and __start_parainstructions. And: AK: Fix warnings about unused variables when PARAVIRT is disabled. Signed-off-by:
-
Rusty Russell authored
Create a paravirt.h header for all the critical operations which need to be replaced with hypervisor calls, and include that instead of defining native operations, when CONFIG_PARAVIRT. This patch does the dumbest possible replacement of paravirtualized instructions: calls through a "paravirt_ops" structure. Currently these are function implementations of native hardware: hypervisors will override the ops structure with their own variants. All the pv-ops functions are declared "fastcall" so that a specific register-based ABI is used, to make inlining assember easier. And: +From: Andy Whitcroft <apw@shadowen.org> The paravirt ops introduce a 'weak' attribute onto memory_setup(). Code ordering leads to the following warnings on x86: arch/i386/kernel/setup.c:651: warning: weak declaration of `memory_setup' after first use results in unspecified behavior Move memory_setup() to avoid this. Signed-off-by:Andy Whitcroft <apw@shadowen.org>
-
Nicolas Kaiser authored
Fix double #includes in arch/i386 Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
David Rientjes authored
Substitutes allocate_pgdat virtual address lookup with pfn_to_kaddr macro. Signed-off-by:
David Rientjes <rientjes@cs.washington.edu> Signed-off-by:
-
Andi Kleen authored
It's two big and used by two callers. Calls should be cheap enough anyways. Signed-off-by: -
Chuck Ebbert authored
IOPL is implicitly saved and restored on task switch, so explicit check is no longer needed. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Andi Kleen authored
Interrupt could happen between setting the IO-APIC entry and setting its interrupt data. Pointed out by Linus. Signed-off-by: -
Andi Kleen authored
Interrupt could happen between setting the IO-APIC entry and setting its interrupt data. Pointed out by Linus. Signed-off-by: -
Paolo 'Blaisorblade' Giarrusso authored
For both i386 and x86_64, copy from arch/$ARCH/lib/delay.c comments about the used magic constants, plus a few other niceties. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Port two patches from i386 to x86_64 delay.c to make sure all rounding is done upward instead of downward. There is no sign in commit messages that the mismatch was done on purpose, and "delay() guarantees sleeping at least for the specified time" is still a valid rule IMHO. The original x86 patches are both from pre-GIT era, i.e.: "[PATCH] round up in __udelay()" in commit 54c7e1f5cc6771ff644d7bc21a2b829308bd126f "[PATCH] add 1 in __const_udelay()" in commit 42c77a9801b8877d8b90f65f75db758822a0bccc (both commits are from converted BK repository to x86_64). AK: fixed gcc warning linux/arch/x86_64/lib/delay.c:43: warning: suggest parentheses around + or - inside shift (did this actually work?) Signed-off-by:
-
