- 30 Dec, 2016 2 commits
-
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/iio/adc/ti_am335x_adc.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Fixes: f438b9da (" drivers: iio: ti_am335x_adc: add dma support") Cc: <stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Marcin Niestroj authored
Datasheet specifies typical and maximum execution times for which CMD register is occupied after previous command execution. We took these values as minimum and maximum time for usleep_range() call before making a new command execution. To be sure, that the CMD register is no longer occupied we need to wait *at least* the maximum time specified by datasheet. Signed-off-by:
Marcin Niestroj <m.niestroj@grinn-global.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
- 03 Dec, 2016 3 commits
-
-
William Breathitt Gray authored
The set_to_preset_on_index sysfs attribute provides a boolean configuration option to enable a preset operation on the respective channel's counter when Index occurs. However, the corresponding configuration bit on the Input/Output Control register must be set low to enable the preset operation. This patch inverts the internal driver boolean logic exposed via the set_to_preset_on_index attribute in order to correctly configure the device which expects an active low bit. Fixes: 28e5d3bb ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
William Breathitt Gray authored
The Input/Output Control register (IOR) is offset by 1 from the respective channel data register. This patch fixes off-by-one errors when attempting to write to a channel IOR where the base address was not properly offset. Fixes: 28e5d3bb ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") Signed-off-by:
-
William Breathitt Gray authored
The LS7266R1 requires bits 5 & 6 to be high in order to select the Index Control Register. This patch fixes a typo that incorrectly selects the Input/Output Control Register where the Index Control Register was desired. Fixes: 28e5d3bb ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") Signed-off-by:
-
- 01 Dec, 2016 13 commits
-
-
Bryan Thompson authored
Remove two passthrough macros that are only called from a single location and make the resultant vmcall directly. Signed-off-by:
Bryan Thompson <bryan.thompson@unisys.com> Signed-off-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bryan Thompson authored
Use the already defined DIAG_SEVERITY values directly instead of special postcode macro names. Signed-off-by:
-
Bryan Thompson authored
There were two instances of FAILURE being misspelled in the s-Par firmware postcode event enum that are fixed. Signed-off-by:
-
Bryan Thompson authored
Remove guestlinuxdebug enum values that are no longer being used and renumber remaining values accordingly. Signed-off-by:
-
Bryan Thompson authored
The visorchipset.c functionality was moved into the visorbus driver previously. This patch updates the s-Par firmware postcode values to reflect this status. Signed-off-by:
-
Bryan Thompson authored
Call POSTCODE_LINUX directly instead of passing through POSTCODE_LINUX_4. Signed-off-by:
-
Bryan Thompson authored
Call POSTCODE_LINUX directly instead of passing through POSTCODE_LINUX_3. Signed-off-by:
-
Bryan Thompson authored
Call POSTCODE_LINUX directly instead of passing through POSTCODE_LINUX_2. Signed-off-by:
-
Bryan Thompson authored
Use CURRENT_FILE_PC directly in the POSTCODE_LINUX macro instead of relying on passthrough macros to provide it. Signed-off-by:
-
Bryan Thompson authored
Leverage the 3 existing s-Par postcode macros to do a bit more work and provide only 1 base postcode macro. Signed-off-by:
-
Erik Arfvidson authored
This patch removes all the unused pound defines currently in vbuschannel.h. Signed-off-by:
Erik Arfvidson <erik.arfvidson@unisys.com> Signed-off-by:
-
Erik Arfvidson authored
This patch removes all the unused pound defines currently in vmcallinterface.h. Signed-off-by:
-
Greg Kroah-Hartman authored
The dgnc driver has no business creating "custom" sysfs files just for a single tty driver. Combined with the odd way they are created, it's just a mess, so remove them entirely as I am tired of tripping over them when doing driver core changes. Cc: Lidza Louina <lidza.louina@gmail.com> Cc: Mark Hounschell <markh@compro.net> Signed-off-by:
-
- 30 Nov, 2016 2 commits
-
-
Andrea Ghittino authored
Fixes sm750fb tabstop style warning found by checkpatch.pl tool Signed-off-by:
Andrea Ghittino <aghittino@gmail.com> Signed-off-by:
-
James Simmons authored
The scripts to replace NULL test got confused with the macro parenthesis so the unlikely test in libcfs_private.h ended up incorrect. This fixes this error. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
- 29 Nov, 2016 20 commits
-
-
Colin Ian King authored
Trivial fix to spelling mistake "oustanding" to "outstanding". Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dawid Kurek authored
Remove one blank line in sequence of two empty lines. Signed-off-by:
Dawid Kurek <dawikur@gmail.com> Signed-off-by:
-
Dawid Kurek authored
Align parameters to open parenthesis. Signed-off-by:
-
Dan Carpenter authored
"revId" needs to be unsigned because we use it to test: if (revId == SM750LE_REVISION_ID) { and SM750LE_REVISION_ID is ((unsigned char )0xfe). Fixes: 81dee67e ("staging: sm750fb: add sm750 to staging") Signed-off-by: -
Sudip Mukherjee authored
The driver was actually released with BSD license. It also gained GPL when it was submitted to be included in the kernel. Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: gzhou1 <guojian.zhou@windriver.com> Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Sergio Paracuellos authored
This patch removes UPDATE_STATS_GB macro in slic.h header file and just inline code. This improve readability. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
This patch remove UPDATE_STATS macro from header slic.h which is not being used. Signed-off-by:
-
Yamanappagouda Patil authored
Fixed checkpatch.pl warnings related to {} brace warnings for single statement blocks. Signed-off-by:Yamanappagouda Patil <goudapatilk@gmail.com> Signed-off-by:
-
Jason Litzinger authored
Fix checkpatch warnings regarding the use of symbolic permissions. Where the MOST_CHANNEL_ATTR macro is used, convert to octal permissions over symbolic. Where _ATTR is used directly, replace with _ATTR_RW/_ATTR_WO and update the show/store function names appropriately. Signed-off-by:
Jason Litzinger <jlitzingerdev@gmail.com> Signed-off-by:
-
Fan Yong authored
This is a feature for the client and server to use obd_connect_flags2 to communicate future feature flags. The client should set this flag whenever any flags in that field are requested, and the server should mask unsupported features from this field (assuming it understands OBD_CONNECT_FLAGS2). When checking if an OBD_CONNECT2_xxxx feature is supported, the client/server needs to firstly check if OBD_CONNECT_FLAGS2 is supported, since this field is also beyond the end of the old obd_connect_data. Land the connection flags to upstream client earlier for reserving the slot to avoid potential conflict with others. Signed-off-by:
Fan Yong <fan.yong@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7543 Reviewed-on: http://review.whamcloud.com/17647Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
Patrick Farrell <paf@cray.com> Signed-off-by:
-
Fan Yong authored
The connection flag OBD_CONNECT_OBDOPACK will be used for the following the patch: LU-4215 optimize OUT protocol http://review.whamcloud.com/15336 Land the connection flags to upstream client earlier for reserving the slot to avoid potential conflict with others. Signed-off-by:
-
Fan Yong authored
The connection flag OBD_CONNECT_LOCK_AHEAD will be used for the following the patch: LU-6917 LDLM lock ahead http://review.whamcloud.com/13564 Land the connection flags to upstream client earlier for reserving the slot to avoid potential conflict with others. Signed-off-by:
-
Fan Yong authored
The connection flag OBD_CONNECT_SUBTREE will be used for the following the patch: LU-28 mounting of filesystem from MDS http://review.whamcloud.com/5007 Land the connection flags to master earlier for reserving the slot to avoid potential conflict with others. Signed-off-by:
-
Andreas Dilger authored
Fix users of flags that were using "int" instead of named enum. Rename some "flags" variables to distinguish between different flags. Signed-off-by:
James Simmons <uja.ornl@yahoo.com> Reviewed-by:
Bob Glossman <bob.glossman@intel.com> Reviewed-by:
frank zago <fzago@cray.com> Reviewed-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
John L. Hammond <john.hammond@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
-
Andreas Dilger authored
Rename LDLM_CANCEL_* flags (used with enum ldlm_lru_flags) to LDLM_LRU_FLAGS_* to avoid confusion with enum ldlm_cancel_flags. Signed-off-by:
-
Andreas Dilger authored
Replace usage of ldlm_wire_policy_data_t with named enums to conform to upstream coding style. Signed-off-by:
-
Andreas Dilger authored
Replace usage of ldlm_side_t with named enums to conform to upstream coding style. Signed-off-by:
-
Andreas Dilger authored
Replace usage of ldlm_policy_data_t with named enums to conform to upstream coding style. Signed-off-by:
-
Dan Carpenter authored
We want sizeof(struct lstcon_node) but instead we're getting the sizeof a pointer. Fixes: 8d78f0f2 ("staging: lustre: lnet: cleanup some of the > 80 line issues") Signed-off-by:
-
Dan Carpenter authored
We should free "desc" before returning NULL. Signed-off-by:
-
