Clarify the test results by grouping the output of test cases belonging
to the same test under a common title. This is consistent with the
output of fib_tests.sh.

Before:

 # ./fib_rule_tests.sh

     TEST: rule6 check: oif redirect to table                            [ OK ]

     TEST: rule6 del by pref: oif redirect to table                      [ OK ]
 [...]
     TEST: rule4 check: oif redirect to table                            [ OK ]

     TEST: rule4 del by pref: oif redirect to table                      [ OK ]
 [...]

 Tests passed: 116
 Tests failed:   0

After:

 # ./fib_rule_tests.sh

 IPv6 FIB rule tests
     TEST: rule6 check: oif redirect to table                            [ OK ]
     TEST: rule6 del by pref: oif redirect to table                      [ OK ]
 [...]

 IPv4 FIB rule tests
     TEST: rule4 check: oif redirect to table                            [ OK ]
     TEST: rule4 del by pref: oif redirect to table                      [ OK ]
 [...]

 Tests passed: 116
 Tests failed:   0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240814111005.955359-3-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The functions are unused since commit 816cda9a ("selftests: net:
fib_rule_tests: add support to select a test to run"). Remove them.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240814111005.955359-2-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Horman says:

====================
ipv6: Add ipv6_addr_{cpu_to_be32,be32_to_cpu} helpers

This series adds and uses some new helpers,
ipv6_addr_{cpu_to_be32,be32_to_cpu}, which are intended to assist in
byte order manipulation of IPv6 addresses stored as as arrays.

v1: https://lore.kernel.org/r/20240812-ipv6_addr-helpers-v1-0-aab5d1f35c40@kernel.org
====================

Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-0-5c974f8cca3e@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use new ipv6_addr_cpu_to_be32 and ipv6_addr_be32_to_cpu helpers,
and IPV6_ADDR_WORDS. This is arguably slightly nicer.

No functional change intended.
Compile tested only.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/netdev/c7684349-535c-45a4-9a74-d47479a50020@lunn.ch/Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-3-5c974f8cca3e@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use ipv6_addr_cpu_to_be32 and ipv6_addr_be32_to_cpu helpers to convert
address, rather than open coding the conversion.

No functional change intended.
Compile tested only.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/netdev/c7684349-535c-45a4-9a74-d47479a50020@lunn.ch/Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-2-5c974f8cca3e@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add helpers to convert an ipv6 addr, expressed as an array
of words, from CPU to big-endian byte order, and vice versa.

No functional change intended.
Compile tested only.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/netdev/c7684349-535c-45a4-9a74-d47479a50020@lunn.ch/Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-1-5c974f8cca3e@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pieter Van Trappen says:

====================
net: dsa: microchip: ksz8795: add Wake on LAN support

Add WoL support for KSZ8795 family of switches. This code was tested
with a KSZ8794 chip.

Strongly based on existing KSZ9477 code which has now been moved to
ksz_common instead of duplicating, as proposed during the review of
the v1 version of this patch.

In addition to the device-tree addition and the actual code, there's
two additional patches that fix some bugs found when further testing
DSA with this KSZ8794 chip.

v5: https://lore.kernel.org/20240812153015.653044-1-vtpieter@gmail.com
v4: https://lore.kernel.org/20240812084945.578993-1-vtpieter@gmail.com
v3: https://lore.kernel.org/20240806132606.1438953-1-vtpieter@gmail.com
v2: https://lore.kernel.org/20240731103403.407818-1-vtpieter@gmail.com
v1: https://lore.kernel.org/20240717193725.469192-1-vtpieter@gmail.com
====================

Link: https://patch.msgid.link/20240813142750.772781-1-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the tag_ksz egress mask for DSA_TAG_PROTO_KSZ8795, the port is
encoded in the two and not three LSB. This fix is for completeness,
for example the bug doesn't manifest itself on the KSZ8794 because bit
2 seems to be always zero.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240813142750.772781-7-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The KSZ87xx switches have 32 static MAC address table entries and not
8. This fixes -ENOSPC non-critical errors from ksz8_add_sta_mac when
configured as a bridge.

Add a new ksz87xx_dev_ops structure to be able to use the
ksz_r_mib_stat64 pointer for this family; this corrects a wrong
mib->counters cast to ksz88xx_stats_raw. This fixes iproute2
statistics. Rename ksz8_dev_ops structure to ksz88x3_dev_ops, in line
with ksz_is_* naming conventions from ksz_common.h.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240813142750.772781-6-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add WoL support for KSZ87xx family of switches. This code was tested
with a KSZ8794 chip.

Implement ksz_common usage of the new device-tree property
'microchip,pme-active-high'.

Make use of the now generalized ksz_common WoL functions, adding an
additional interrupt register write for KSZ87xx. Add helper functions
to convert from PME (port) read/writes to indirect register
read/writes in the dedicated ksz8795 sources.  Add initial
configuration during (port) setup as per KSZ9477.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240813142750.772781-5-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Generalize KSZ9477 WoL functions at ksz_common. Move dedicated registers
and generic masks to existing structures & defines for that purpose.

Introduction of PME (port) read/write helper functions, which happen
to be the generic read/write for KSZ9477 but not for the incoming
KSZ87xx patch.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240813142750.772781-4-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move KSZ9477 WoL functions to ksz_common, in preparation for adding
KSZ87xx family support.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://patch.msgid.link/20240813142750.772781-3-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add microchip,pme-active-high property to set the PME (Power
Management Event) pin polarity for Wake on Lan interrupts.

Note that the polarity is active-low by default.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240813142750.772781-2-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce cable testing support for the DP83TG720 PHY. This implementation
is based on the "DP83TG720S-Q1: Configuring for Open Alliance Specification
Compliance (Rev. B)" application note.

The feature has been tested with cables of various lengths:
- No cable: 1m till open reported.
- 5 meter cable: reported properly.
- 20 meter cable: reported as 19m.
- 40 meter cable: reported as cable ok.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240812073046.1728288-3-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce helper functions specific to Open Alliance diagnostics,
integrating them into the PHY framework. Currently, these helpers
are limited to 1000BaseT1 specific TDR functionality.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240812073046.1728288-2-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add new result codes to support TDR diagnostics in preparation for
Open Alliance 1000BaseT1 TDR support:

- ETHTOOL_A_CABLE_RESULT_CODE_NOISE: TDR not possible due to high noise
  level.
- ETHTOOL_A_CABLE_RESULT_CODE_RESOLUTION_NOT_POSSIBLE: TDR resolution not
  possible / out of distance.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240812073046.1728288-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jason Wang says:

====================
virtio-net: synchronize op/admin state

This series tries to synchronize the operstate with the admin state
which allows the lower virtio-net to propagate the link status to the
upper devices like macvlan.

This is done by toggling carrier during ndo_open/stop while doing
other necessary serialization about the carrier settings during probe.

While at it, also fix a race between probe and ndo_set_features as we
didn't initalize the guest offload setting under rtnl lock.
====================

Link: https://patch.msgid.link/20240814052228.4654-1-jasowang@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We calculate guest offloads during probe without the protection of
rtnl_lock. This lead to race between probe and ndo_set_features. Fix
this by moving the calculation under the rtnl_lock.

Fixes: 3f93522f ("virtio-net: switch off offloads on demand if possible on XDP set")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240814052228.4654-5-jasowang@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch synchronizes operstate with admin state per RFC2863.

This is done by trying to toggle the carrier upon open/close and
synchronize with the config change work. This allows to propagate
status correctly to stacked devices like:

ip link add link enp0s3 macvlan0 type macvlan
ip link set link enp0s3 down
ip link show

Before this patch:

3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
......
5: macvlan0@enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff

After this patch:

3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
...
5: macvlan0@enp0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
    link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff

Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240814052228.4654-4-jasowang@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sometime, it would be useful to disable the configure change
notification from the driver. So this patch allows this by introducing
a variable config_change_driver_disabled and only allow the configure
change notification callback to be triggered when it is allowed by
both the virtio core and the driver. It is set to false by default to
hold the current semantic so we don't need to change any drivers.

The first user for this would be virtio-net.

Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240814052228.4654-3-jasowang@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Following patch will allow the config interrupt to be disabled by a
specific driver via another boolean. So this patch renames
virtio_config_enabled and relevant helpers to
virtio_config_core_enabled.

Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240814052228.4654-2-jasowang@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing __percpu qualifier to a (void *) cast to fix

dev.c:10863:45: warning: cast removes address space '__percpu' of expression

sparse warning. Also remove now unneeded __force sparse directives.

Found by GCC's named address space checks.

There were no changes in the resulting object file.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://patch.msgid.link/20240814070748.943671-1-ubizjak@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to commit 70f06c11 ("sched: act_ct: switch to per-action
label counting"), we should also switch to per-action label counting
in openvswitch conntrack, as Florian suggested.

The difference is that nf_connlabels_get() is called unconditionally
when creating an ct action in ovs_ct_copy_action(). As with these
flows:

  table=0,ip,actions=ct(commit,table=1)
  table=1,ip,actions=ct(commit,exec(set_field:0xac->ct_label),table=2)

it needs to make sure the label ext is created in the 1st flow before
the ct is committed in ovs_ct_commit(). Otherwise, the warning in
nf_ct_ext_add() when creating the label ext in the 2nd flow will
be triggered:

   WARN_ON(nf_ct_is_confirmed(ct));
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/6b9347d5c1a0b364e88d900b29a616c3f8e5b1ca.1723483073.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 2acda577 ("net/mlx5e: Improve remote NUMA preferences used for the IRQ affinity hints")
removed the usage of cpumask_local_spread().

The issue explained in this commit was fixed by
commit 406d394a ("cpumask: improve on cpumask_local_spread() locality").

Since this commit, mlx5_cpumask_default_spread() is having the same
behavior as cpumask_local_spread().

This commit is about :
- removing the specific logic and use cpumask_local_spread() instead
- passing mlx5_core_dev as argument to more flexibility

mlx5_cpumask_default_spread() is kept as it could be useful for some
future specific quirks.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240812082244.22810-1-e.velu@criteo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
ip: Random cleanup for devinet.c

patch 1 ~ 3 remove defensive !ifa->ifa_dev tests.
patch 4 & 5 deduplicate common code.
====================

Link: https://patch.msgid.link/20240809235406.50187-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

INFINITY_LIFE_TIME is the common value used in IPv4 and IPv6 but defined
in both .c files.

Also, 0xffffffff used in addrconf_timeout_fixup() is INFINITY_LIFE_TIME.

Let's move INFINITY_LIFE_TIME's definition to addrconf.h
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-6-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Whenever ifa is allocated, we call INIT_HLIST_NODE(&ifa->hash).

Let's move it to inet_alloc_ifa().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-5-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now, ifa_dev is only set in inet_alloc_ifa() and never
NULL after ifa gets visible.

Let's remove the unneeded NULL check for ifa->ifa_dev.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-4-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When a new IPv4 address is assigned via ioctl(SIOCSIFADDR),
inet_set_ifa() sets ifa->ifa_dev if it's different from in_dev
passed as an argument.

In this case, ifa is always a newly allocated object, and
ifa->ifa_dev is NULL.

inet_set_ifa() can be called for an existing reused ifa, then,
this check is always false.

Let's set ifa_dev in inet_alloc_ifa() and remove the check
in inet_set_ifa().

Now, inet_alloc_ifa() is symmetric with inet_rcu_free_ifa().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-3-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dev->ip_ptr could be NULL if we set an invalid MTU.

Even then, if we issue ioctl(SIOCSIFADDR) for a new IPv4 address,
devinet_ioctl() allocates struct in_ifaddr and fails later in
inet_set_ifa() because in_dev is NULL.

Let's move the check earlier.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-2-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Increase max_mtu from 1500 to 1518 bytes when not configured for jumbo
frames. Use 1536 as a starting point as documented in macb.h for
oversized (big) frames, which is the configuration applied in case
jumbo frames capability is not configured; ref. macb_main.c.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Link: https://patch.msgid.link/20240812090657.583821-1-vtpieter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The word 'expected' was spelled as 'exepcted'.
Fixed the typo in this patch.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240814173121.33590-1-abhashkumarjha123@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
  c25504a0 ("dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys")
  be034ee6 ("dt-bindings: net: fsl,qoriq-mc-dpmac: using unevaluatedProperties")
https://lore.kernel.org/20240815110934.56ae623a@canb.auug.org.au

drivers/net/dsa/vitesse-vsc73xx-core.c
  5b9eebc2 ("net: dsa: vsc73xx: pass value in phy_write operation")
  fa63c643 ("net: dsa: vsc73xx: check busy flag in MDIO operations")
  2524d6c2 ("net: dsa: vsc73xx: use defined values in phy operations")
https://lore.kernel.org/20240813104039.429b9fe6@canb.auug.org.au
Resolve by using FIELD_PREP(), Stephen's resolution is simpler.

Adjacent changes:

net/vmw_vsock/af_vsock.c
  69139d29 ("vsock: fix recursive ->recvmsg calls")
  744500d8 ("vsock: add support for SIOCOUTQ ioctl")

Link: https://patch.msgid.link/20240815141149.33862-1-pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from wireless and netfilter

  Current release - regressions:

   - udp: fall back to software USO if IPv6 extension headers are
     present

   - wifi: iwlwifi: correctly lookup DMA address in SG table

  Current release - new code bugs:

   - eth: mlx5e: fix queue stats access to non-existing channels splat

  Previous releases - regressions:

   - eth: mlx5e: take state lock during tx timeout reporter

   - eth: mlxbf_gige: disable RX filters until RX path initialized

   - eth: igc: fix reset adapter logics when tx mode change

  Previous releases - always broken:

   - tcp: update window clamping condition

   - netfilter:
      - nf_queue: drop packets with cloned unconfirmed conntracks
      - nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests

   - vsock: fix recursive ->recvmsg calls

   - dsa: vsc73xx: fix MDIO bus access and PHY opera

   - eth: gtp: pull network headers in gtp_dev_xmit()

   - eth: igc: fix packet still tx after gate close by reducing i226 MAC
     retry buffer

   - eth: mana: fix RX buf alloc_size alignment and atomic op panic

   - eth: hns3: fix a deadlock problem when config TC during resetting"

* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  net: hns3: use correct release function during uninitialization
  net: hns3: void array out of bound when loop tnl_num
  net: hns3: fix a deadlock problem when config TC during resetting
  net: hns3: use the user's cfg after reset
  net: hns3: fix wrong use of semaphore up
  selftests: net: lib: kill PIDs before del netns
  pse-core: Conditionally set current limit during PI regulator registration
  net: thunder_bgx: Fix netdev structure allocation
  net: ethtool: Allow write mechanism of LPL and both LPL and EPL
  vsock: fix recursive ->recvmsg calls
  selftest: af_unix: Fix kselftest compilation warnings
  netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
  netfilter: nf_tables: Introduce nf_tables_getobj_single
  netfilter: nf_tables: Audit log dump reset after the fact
  selftests: netfilter: add test for br_netfilter+conntrack+queue combination
  netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
  netfilter: flowtable: initialise extack before use
  netfilter: nfnetlink: Initialise extack before use in ACKs
  netfilter: allow ipv6 fragments to arrive on different devices
  tcp: Update window clamping condition
  ...

Pull media fixes from Mauro Carvalho Chehab:
 "Two regression fixes:

   - fix atomisp support for ISP2400

   - fix dvb-usb regression for TeVii s480 dual DVB-S2 S660 board"

* tag 'media/v6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: atomisp: Fix streaming no longer working on BYT / ISP2400 devices
  media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()"

Pull ata fix from Niklas Cassel:

 - Revert a recent change to sense data generation.

   Sense data can be in either fixed format or descriptor format.

   The D_SENSE bit in the Control mode page controls which format to
   generate. All places but one respected the D_SENSE bit.

   The recent change fixed the one place that didn't respect the D_SENSE
   bit. However, it turns out that hdparm, hddtemp and udisks
   (incorrectly) assumes sense data in descriptor format.

   Therefore, even while the change was technically correct, revert it,
   since even if these user space programs are fixed to (correctly) look
   at the format type before parsing the data, older versions of these
   tools will be around roughly forever.

* tag 'ata-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  Revert "ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error"

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Ignores ifindex for types other than mcast/linklocal in ipv6 frag
   reasm, from Tom Hughes.

2) Initialize extack for begin/end netlink message marker in batch,
   from Donald Hunter.

3) Initialize extack for flowtable offload support, also from Donald.

4) Dropped packets with cloned unconfirmed conntracks in nfqueue,
   later it should be possible to explore lookup after reinject but
   Florian prefers this approach at this stage. From Florian Westphal.

5) Add selftest for cloned unconfirmed conntracks in nfqueue for
   previous update.

6) Audit after filling netlink header successfully in object dump,
   from Phil Sutter.

7-8) Fix concurrent dump and reset which could result in underflow
     counter / quota objects.

netfilter pull request 24-08-15

* tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
  netfilter: nf_tables: Introduce nf_tables_getobj_single
  netfilter: nf_tables: Audit log dump reset after the fact
  selftests: netfilter: add test for br_netfilter+conntrack+queue combination
  netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
  netfilter: flowtable: initialise extack before use
  netfilter: nfnetlink: Initialise extack before use in ACKs
  netfilter: allow ipv6 fragments to arrive on different devices
====================

Link: https://patch.msgid.link/20240814222042.150590-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://patch.msgid.link/20240813141024.1707252-1-shaojijie@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

pci_request_regions is called to apply for PCI I/O and memory resources
when the driver is initialized, Therefore, when the driver is uninstalled,
pci_release_regions should be used to release PCI I/O and memory resources
instead of pci_release_mem_regions is used to release memory reasouces
only.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>