- 18 Mar, 2013 7 commits
-
-
Jiri Slaby authored
data_len in jsm_input cannot be zero as we would jump out early in the function. It also cannot be negative because it is an int and we do bitwise and with 8192. So remove the check. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Hurley authored
Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Peter Hurley authored
Concurrent access to tty->pgrp must be protected with tty->ctrl_lock. Also, as noted in the comments, reading current->signal->tty is safe because either, 1) current->signal->tty is assigned by current, or 2) current->signal->tty is set to NULL. NB: for reference, tty_check_change() implements a similar POSIX check for the ioctls corresponding to tcflush(), tcdrain(), tcsetattr(), tcsetpgrp(), tcflow() and tcsendbreak(). Signed-off-by:
-
Peter Hurley authored
An ldisc reference is insufficient guarantee the foreground process group is not in the process of being signalled from a hangup. 1) Reads of tty->pgrp must be locked with ctrl_lock 2) The group pid must be referenced for the duration of signalling. Because the driver-side is not process-context, a pid reference must be acquired. Signed-off-by:
-
Peter Hurley authored
As noted in the following comment: /* FIXME: there is a tiny race here if the receive room check runs before the other work executes and empties the buffer (upping the receiving room and unthrottling. We then throttle and get stuck. This has been observed and traced down by Vincent Pillet/ We need to address this when we sort out out the rx path locking */ Use new safe throttle/unthrottle functions to re-evaluate conditions if interrupted by the complement flow control function. Reported-by:Vincent Pillet <vincentx.pillet@intel.com> Signed-off-by:
-
Peter Hurley authored
The tty driver can become stuck throttled due to race conditions between throttle and unthrottle, when the decision to throttle or unthrottle is conditional. The following example helps to illustrate the race: CPU 0 | CPU 1 | if (condition A) | | <processing such that A not true> | if (!condition A) | unthrottle() throttle() | | Note the converse is also possible; ie., CPU 0 | CPU 1 | | if (!condition A) <processing such that A true> | if (condition A) | throttle() | | unthrottle() | Add new throttle/unthrottle functions based on the familiar model of task state and schedule/wake. For example, while (1) { tty_set_flow_change(tty, TTY_THROTTLE_SAFE); if (!condition) break; if (!tty_throttle_safe(tty)) break; } __tty_set_flow_change(tty, 0); In this example, if an unthrottle occurs after the condition is evaluated but before tty_throttle_safe(), then tty_throttle_safe() will return non-zero, looping and forcing the re-evaluation of condition. Reported-by: -
Peter Hurley authored
2-line function check_unthrottle() is now only called from n_tty_read(); merge into caller. Signed-off-by:
-
- 15 Mar, 2013 12 commits
-
-
zhangwei(Jovi) authored
Currently help message of /proc/sysrq-trigger highlight its upper-case characters, like below: SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) ... this would confuse user trigger sysrq by upper-case character, which is inconsistent with the real lower-case character registed key. This inconsistent help message will also lead more confused when 26 upper-case letters put into use in future. This patch fix it. Thanks the comments from Andrew and Randy. Signed-off-by:zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Peter Hurley authored
An exiting session leader can hang if a foreground process is blocking for line discipline i/o, eg. in n_tty_read(). This happens because the blocking reader is holding an ldisc reference (indicating the line discipline is in-use) which prevents __tty_hangup() from recycling the line discipline. Although waiters are woken before attempting to gain exclusive access for changing the ldisc, the blocking reader in this case will not exit the i/o loop since it has not yet received SIGHUP (because it has not been sent). Instead, perform signalling first, then recycle the line discipline. Fixes: INFO: task init:1 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. init D 00000000001d7180 2688 1 0 0x00000002 ffff8800b9acfba8 0000000000000002 00000000001d7180 ffff8800b9b10048 ffff8800b94cb000 ffff8800b9b10000 00000000001d7180 00000000001d7180 ffff8800b9b10000 ffff8800b9acffd8 00000000001d7180 00000000001d7180 Call Trace: [<ffffffff83db9909>] __schedule+0x2e9/0x3b0 [<ffffffff83db9b35>] schedule+0x55/0x60 [<ffffffff83db74ba>] schedule_timeout+0x3a/0x370 [<ffffffff81182349>] ? mark_held_locks+0xf9/0x130 [<ffffffff83dbab38>] ? down_failed+0x108/0x200 [<ffffffff83dbb7ab>] ? _raw_spin_unlock_irq+0x2b/0x80 [<ffffffff81182608>] ? trace_hardirqs_on_caller+0x128/0x160 [<ffffffff83dbab61>] down_failed+0x131/0x200 [<ffffffff83dbbfad>] ? tty_ldisc_lock_pair_timeout+0xcd/0x120 [<ffffffff83dbae03>] ldsem_down_write+0xd3/0x113 [<ffffffff83dbbfad>] ? tty_ldisc_lock_pair_timeout+0xcd/0x120 [<ffffffff8118264d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff83dbbfad>] tty_ldisc_lock_pair_timeout+0xcd/0x120 [<ffffffff81c3df60>] tty_ldisc_hangup+0xd0/0x220 [<ffffffff81c35bd7>] __tty_hangup+0x137/0x4f0 [<ffffffff81c37c7c>] disassociate_ctty+0x6c/0x230 [<ffffffff8111290c>] do_exit+0x41c/0x590 [<ffffffff8107ad34>] ? syscall_trace_enter+0x24/0x2e0 [<ffffffff81112b4a>] do_group_exit+0x8a/0xc0 [<ffffffff81112b92>] sys_exit_group+0x12/0x20 [<ffffffff83dc49d8>] tracesys+0xe1/0xe6 1 lock held by init/1: #0: (&tty->ldisc_sem){++++++}, at: [<ffffffff83dbbfad>] tty_ldisc_lock_pair_timeout+0xcd/0x120 Reported-by:Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
Peter Hurley authored
When the session leader is exiting, signal the foreground group processes as part of the hangup sequence, instead of after the hangup is complete. This prepares for hanging up the line discipline _after_ signalling processes which may be blocking on ldisc i/o. Parameterize __tty_hangup() to distinguish between when the session leader is exiting and all other hangups; signal the foreground group after signalling the session leader and its process group, which preserves the original signal order. Signed-off-by:
-
Peter Hurley authored
The interrupt state does not need to be saved, disabled and restored here; interrupts are already off because this lock is bracketed by spin_lock_irq/spin_unlock_irq. Signed-off-by:
-
Peter Hurley authored
__tty_hangup() and tty_vhangup() cannot be called from atomic context, so locks do not need to preserve the interrupt state (although, still disable interrupts). Signed-off-by:
-
Peter Hurley authored
Reduce complexity of __tty_hangup(); separate SIGHUP signalling into tty_signal_session_leader(). Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Liang Li authored
Implement console poll for pch_uart, this could enable KGDBoC when on pch-uart console. Signed-off-by:
Liang Li <liang.li@windriver.com> Acked-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Jingoo Han authored
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Tony Prisk <linux@prisktech.co.nz> Reviewed-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
Sachin Kamat authored
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by:
-
Peter Hurley authored
port->itty has already been reset by release_tty() before pty_cleanup() is called. Call stack: release_tty() tty_kref_put() queue_release_one_tty() release_one_tty() : workqueue tty->ops->cleanup() pty_cleanup() Signed-off-by:
-
- 10 Mar, 2013 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace bugfixes from Eric Biederman: "This is three simple fixes against 3.9-rc1. I have tested each of these fixes and verified they work correctly. The userns oops in key_change_session_keyring and the BUG_ON triggered by proc_ns_follow_link were found by Dave Jones. I am including the enhancement for mount to only trigger requests of filesystem modules here instead of delaying this for the 3.10 merge window because it is both trivial and the kind of change that tends to bit-rot if left untouched for two months." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Use nd_jump_link in proc_ns_follow_link fs: Limit sys_mount to only request filesystem modules (Part 2). fs: Limit sys_mount to only request filesystem modules. userns: Stop oopsing in key_change_session_keyring
-
- 09 Mar, 2013 5 commits
-
-
Linus Torvalds authored
There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
Update proc_ns_follow_link to use nd_jump_link instead of just manually updating nd.path.dentry. This fixes the BUG_ON(nd->inode != parent->d_inode) reported by Dave Jones and reproduced trivially with mkdir /proc/self/ns/uts/a. Sigh it looks like the VFS change to require use of nd_jump_link happend while proc_ns_follow_link was baking and since the common case of proc_ns_follow_link continued to work without problems the need for making this change was overlooked. Cc: stable@vger.kernel.org Signed-off-by:"Eric W. Biederman" <ebiederm@xmission.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are scattered fixes and one performance improvement. The biggest functional change is in how we throttle metadata changes. The new code bumps our average file creation rate up by ~13% in fs_mark, and lowers CPU usage. Stefan bisected out a regression in our allocation code that made balance loop on extents larger than 256MB." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: improve the delayed inode throttling Btrfs: fix a mismerge in btrfs_balance() Btrfs: enforce min_bytes parameter during extent allocation Btrfs: allow running defrag in parallel to administrative tasks Btrfs: avoid deadlock on transaction waiting list Btrfs: do not BUG_ON on aborted situation Btrfs: do not BUG_ON in prepare_to_reloc Btrfs: free all recorded tree blocks on error Btrfs: build up error handling for merge_reloc_roots Btrfs: check for NULL pointer in updating reloc roots Btrfs: fix unclosed transaction handler when the async transaction commitment fails Btrfs: fix wrong handle at error path of create_snapshot() when the commit fails Btrfs: use set_nlink if our i_nlink is 0
-
Benson Leung authored
Add basic platform data to get the current upstream driver working with the 224s touchpad and 1664s touchscreen. We will be using NULL config so we will use the settings from the devices' NVRAMs. Signed-off-by:
Benson Leung <bleung@chromium.org> Tested-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Daniel Kurtz authored
This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Nick Dyer <nick.dyer@itdev.co.uk> Tested-by:
-
- 08 Mar, 2013 14 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "A small set of cifs fixes which includes one for a recent regression in the write path (pointed out by Anton), some fixes for rename problems and as promised for 3.9 removing the obsolete sockopt mount option (and the accompanying deprecation warning)." * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix missing of oplock_read value in smb30_values structure cifs: don't try to unlock pagecache page after releasing it cifs: remove the sockopt= mount option cifs: Check server capability before attempting silly rename cifs: Fix bug when checking error condition in cifs_rename_pending_delete()
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: alpha: boot: fix build breakage introduced by system.h disintegration memcg: initialize kmem-cache destroying work earlier Randy has moved ksm: fix m68k build: only NUMA needs pfn_to_nid dmi_scan: fix missing check for _DMI_ signature in smbios_present() Revert parts of "hlist: drop the node parameter from iterators" idr: remove WARN_ON_ONCE() on negative IDs mm/mempolicy.c: fix sp_node_init() argument ordering mm/mempolicy.c: fix wrong sp_node insertion ipc: don't allocate a copy larger than max ipc: fix potential oops when src msg > 4k w/ MSG_COPY
-
Will Deacon authored
Commit ec221208 ("Disintegrate asm/system.h for Alpha") removed the system.h include from boot/head.S, which puts the PAL_* asm constants out of scope. Include <asm/pal.h> so we can get building again. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: David Rusling <david.rusling@linaro.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
Fix a warning from lockdep caused by calling cancel_work_sync() for uninitialized struct work. This path has been triggered by destructon kmem-cache hierarchy via destroying its root kmem-cache. cache ffff88003c072d80 obj ffff88003b410000 cache ffff88003c072d80 obj ffff88003b924000 cache ffff88003c20bd40 INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2825, comm: insmod Tainted: G O 3.9.0-rc1-next-20130307+ #611 Call Trace: __lock_acquire+0x16a2/0x1cb0 lock_acquire+0x8a/0x120 flush_work+0x38/0x2a0 __cancel_work_timer+0x89/0xf0 cancel_work_sync+0xb/0x10 kmem_cache_destroy_memcg_children+0x81/0xb0 kmem_cache_destroy+0xf/0xe0 init_module+0xcb/0x1000 [kmem_test] do_one_initcall+0x11a/0x170 load_module+0x19b0/0x2320 SyS_init_module+0xc6/0xf0 system_call_fastpath+0x16/0x1b Example module to demonstrate: #include <linux/module.h> #include <linux/slab.h> #include <linux/mm.h> #include <linux/workqueue.h> int __init mod_init(void) { int size = 256; struct kmem_cache *cache; void *obj; struct page *page; cache = kmem_cache_create("kmem_cache_test", size, size, 0, NULL); if (!cache) return -ENOMEM; printk("cache %p\n", cache); obj = kmem_cache_alloc(cache, GFP_KERNEL); if (obj) { page = virt_to_head_page(obj); printk("obj %p cache %p\n", obj, page->slab_cache); kmem_cache_free(cache, obj); } flush_scheduled_work(); obj = kmem_cache_alloc(cache, GFP_KERNEL); if (obj) { page = virt_to_head_page(obj); printk("obj %p cache %p\n", obj, page->slab_cache); kmem_cache_free(cache, obj); } kmem_cache_destroy(cache); return -EBUSY; } module_init(mod_init); MODULE_LICENSE("GPL"); Signed-off-by:Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by:
-
Randy Dunlap authored
Update email address and CREDITS info. xenotime.net is defunct. Signed-off-by:
-
Hugh Dickins authored
A CONFIG_DISCONTIGMEM=y m68k config gave mm/ksm.c: In function `get_kpfn_nid': mm/ksm.c:492: error: implicit declaration of function `pfn_to_nid' linux/mmzone.h declares it for CONFIG_SPARSEMEM and CONFIG_FLATMEM, but expects the arch's asm/mmzone.h to declare it for CONFIG_DISCONTIGMEM (see arch/mips/include/asm/mmzone.h for example). Or perhaps it is only expected when CONFIG_NUMA=y: too much of a maze, and m68k got away without it so far, so fix the build in mm/ksm.c. Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Petr Holasek <pholasek@redhat.com> Signed-off-by:
-
Ben Hutchings authored
Commit 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") hoisted the check for "_DMI_" into dmi_scan_machine(), which means that we don't bother to check for "_DMI_" at offset 16 in an SMBIOS entry. smbios_present() may also call dmi_present() for an address where we found "_SM_", if it failed further validation. Check for "_DMI_" in smbios_present() before calling dmi_present(). [akpm@linux-foundation.org: fix build] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reported-by:
Tim McGrath <tmhikaru@gmail.com> Tested-by:
-
Arnd Bergmann authored
Commit b67bfe0d ("hlist: drop the node parameter from iterators") did a lot of nice changes but also contains two small hunks that seem to have slipped in accidentally and have no apparent connection to the intent of the patch. This reverts the two extraneous changes. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Tejun Heo authored
idr_find(), idr_remove() and idr_replace() used to silently ignore the sign bit and perform lookup with the rest of the bits. The weird behavior has been changed such that negative IDs are treated as invalid. As the behavior change was subtle, WARN_ON_ONCE() was added in the hope of determining who's calling idr functions with negative IDs so that they can be examined for problems. Up until now, all two reported cases are ID number coming directly from userland and getting fed into idr_find() and the warnings seem to cause more problems than being helpful. Drop the WARN_ON_ONCE()s. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by: <markus@trippelsdorf.de> Signed-off-by:
-
KOSAKI Motohiro authored
Currently, n_new is wrongly initialized. start and end parameter are inverted. Let's fix it. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
-
Hillf Danton authored
n->end is accessed in sp_insert(). Thus it should be update before calling sp_insert(). This mistake may make kernel panic. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Signed-off-by:
-
Peter Hurley authored
When MSG_COPY is set, a duplicate message must be allocated for the copy before locking the queue. However, the copy could not be larger than was sent which is limited to msg_ctlmax. Signed-off-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Peter Hurley authored
If the src msg is > 4k, then dest->next points to the next allocated segment; resetting it just prior to dereferencing is bad. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull tile architecture fixes from Chris Metcalf: "This fixes the bug that Al Viro spotted with the compat llseek code. I also fixed the compat syscall definitions to use the new syscall define macros to properly sign-extend their arguments." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: properly use COMPAT_SYSCALL_DEFINEx tile: work around bug in the generic sys_llseek
-
