- 03 Jan, 2013 1 commit
-
-
Ben Hutchings authored
This reverts commit c5ee5868, which was commit 201e72ac upstream. Herton Ronaldo Krzesinski pointed out that the race condition this dealt with does not exist in 3.2.y. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
- 06 Dec, 2012 39 commits
-
-
Ben Hutchings authored
-
Ben Hutchings authored
commit 23795e58 upstream. IVB Xeon currently shares the same parameters IVB client. For 3.2, add model number to the switch in intel_idle_probe(), as there is no device ID table. Signed-off-by:
-
Len Brown authored
commit 6edab08c upstream. From an OS point of view, IVB looks like SNB, but quicker. Signed-off-by:
Len Brown <len.brown@intel.com> [bwh: Backported to 3.2: add model number to the switch in intel_idle_probe(), as there is no device ID table] Signed-off-by:
-
Mike Galbraith authored
commit 412d32e6 upstream. A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling off, never to be seen again. In the case where this occurred, an exiting thread hit reiserfs homebrew conditional resched while holding a mutex, bringing the box to its knees. PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush" #0 [ffff8808157e7670] schedule at ffffffff8143f489 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs] #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs] #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f [exception RIP: kernel_thread_helper] RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by:
Mike Galbraith <mgalbraith@suse.de> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Naoya Horiguchi authored
commit 783657a7 upstream. When we try to soft-offline a thp tail page, put_page() is called on the tail page unthinkingly and VM_BUG_ON is triggered in put_compound_page(). This patch splits thp before going into the main body of soft-offlining. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johannes Weiner authored
commit 60cefed4 upstream. Kswapd does not in all places have the same criteria for a balanced zone. Zones are only being reclaimed when their high watermark is breached, but compaction checks loop over the zonelist again when the zone does not meet the low watermark plus two times the size of the allocation. This gets kswapd stuck in an endless loop over a small zone, like the DMA zone, where the high watermark is smaller than the compaction requirement. Add a function, zone_balanced(), that checks the watermark, and, for higher order allocations, if compaction has enough free memory. Then use it uniformly to check for balanced zones. This makes sure that when the compaction watermark is not met, at least reclaim happens and progress is made - or the zone is declared unreclaimable at some point and skipped entirely. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by:
George Spelvin <linux@horizon.com> Reported-by:
Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Reported-by:
Tomas Racek <tracek@redhat.com> Tested-by:
Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Jianguo Wu authored
commit ae64ffca upstream. I enable CONFIG_DEBUG_VIRTUAL and CONFIG_SPARSEMEM_VMEMMAP, when doing memory hotremove, there is a kernel BUG at arch/x86/mm/physaddr.c:20. It is caused by free_section_usemap()->virt_to_page(), virt_to_page() is only used for kernel direct mapping address, but sparse-vmemmap uses vmemmap address, so it is going wrong here. ------------[ cut here ]------------ kernel BUG at arch/x86/mm/physaddr.c:20! invalid opcode: 0000 [#1] SMP Modules linked in: acpihp_drv acpihp_slot edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse vfat fat loop dm_mod coretemp kvm crc32c_intel ipv6 ixgbe igb iTCO_wdt i7core_edac edac_core pcspkr iTCO_vendor_support ioatdma microcode joydev sr_mod i2c_i801 dca lpc_ich mfd_core mdio tpm_tis i2c_core hid_generic tpm cdrom sg tpm_bios rtc_cmos button ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore usb_common sd_mod crc_t10dif processor thermal_sys hwmon scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic ata_piix libata megaraid_sas scsi_mod CPU 39 Pid: 6454, comm: sh Not tainted 3.7.0-rc1-acpihp-final+ #45 QCI QSSC-S4R/QSSC-S4R RIP: 0010:[<ffffffff8103c908>] [<ffffffff8103c908>] __phys_addr+0x88/0x90 RSP: 0018:ffff8804440d7c08 EFLAGS: 00010006 RAX: 0000000000000006 RBX: ffffea0012000000 RCX: 000000000000002c ... Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Reviewd-by:
Wen Congyang <wency@cn.fujitsu.com> Acked-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Darren Hart authored
commit aa10990e upstream. Dave Jones reported a bug with futex_lock_pi() that his trinity test exposed. Sometime between queue_me() and taking the q.lock_ptr, the lock_ptr became NULL, resulting in a crash. While futex_wake() is careful to not call wake_futex() on futex_q's with a pi_state or an rt_waiter (which are either waiting for a futex_unlock_pi() or a PI futex_requeue()), futex_wake_op() and futex_requeue() do not perform the same test. Update futex_wake_op() and futex_requeue() to test for q.pi_state and q.rt_waiter and abort with -EINVAL if detected. To ensure any future breakage is caught, add a WARN() to wake_futex() if the same condition is true. This fix has seen 3 hours of testing with "trinity -c futex" on an x86_64 VM with 4 CPUS. [akpm@linux-foundation.org: tidy up the WARN()] Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Reported-by:
Dave Jones <davej@redat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: John Kacur <jkacur@redhat.com> Signed-off-by:
-
Oliver Hartkopp authored
commit 81b40110 upstream. Set in the rx_ifindex to pass the correct interface index in the case of a message timeout detection. Usually the rx_ifindex value is set at receive time. But when no CAN frame has been received the RX_TIMEOUT notification did not contain a valid value. Reported-by:
Andre Naujoks <nautsch2@googlemail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Jan Kara authored
commit 25389bb2 upstream. Commit 09e05d48 introduced a wait for transaction commit into journal_unmap_buffer() in the case we are truncating a buffer undergoing commit in the page stradding i_size on a filesystem with blocksize < pagesize. Sadly we forgot to drop buffer lock before waiting for transaction commit and thus deadlock is possible when kjournald wants to lock the buffer. Fix the problem by dropping the buffer lock before waiting for transaction commit. Since we are still holding page lock (and that is OK), buffer cannot disappear under us. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Roland Dreier authored
commit 893d290f upstream. After we've done __elv_add_request() and __blk_run_queue() in blk_execute_rq_nowait(), the request might finish and be freed immediately. Therefore checking if the type is REQ_TYPE_PM_RESUME isn't safe afterwards, because if it isn't, rq might be gone. Instead, check beforehand and stash the result in a temporary. This fixes crashes in blk_execute_rq_nowait() I get occasionally when running with lots of memory debugging options enabled -- I think this race is usually harmless because the window for rq to be reallocated is so small. Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jens Axboe authored
commit a8c32a5c upstream. Request based dm attempts to re-run the request queue off the request completion path. If used with a driver that potentially does end_io from its request_fn, we could deadlock trying to recurse back into request dispatch. Fix this by punting the request queue run to kblockd. Tested to fix a quickly reproducible deadlock in such a scenario. Acked-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Al Viro authored
commit 441a179d upstream. int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, compat_sigset_t __user *oset, unsigned int sigsetsize) { sigset_t old_set, new_set; int ret; if (set && get_sigset32(set, &new_set, sigsetsize)) ... static int get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz) { compat_sigset_t s; int r; if (sz != sizeof *set) panic("put_sigset32()"); In other words, rt_sigprocmask(69, (void *)69, 69) done by 32bit process will promptly panic the box. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 1dc831bf upstream. - The code relies on rc_pci_fixup being called, which only happens when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting this causes a booting failure with a non-obvious cause. - Update rc_pci_fixup to set the class properly, copying the more modern style from other places - Correct the rc_pci_fixup comment Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Russell King - ARM Linux authored
commit d356cf5a upstream. PMU interrupts start at IRQ_DOVE_PMU_START, not IRQ_DOVE_PMU_START + 1. Fix the condition. (It may have been less likely to occur had the code been written "if (irq >= IRQ_DOVE_PMU_START" which imho is the easier to understand notation, and matches the normal way of thinking about these things.) Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King - ARM Linux authored
commit 5d3df935 upstream. Fix the acknowledgement of PMU interrupts on Dove: some Dove hardware has not been sensibly designed so that interrupts can be handled in a race free manner. The PMU is one such instance. The pending (aka 'cause') register is a bunch of RW bits, meaning that these bits can be both cleared and set by software (confirmed on the Armada-510 on the cubox.) Hardware sets the appropriate bit when an interrupt is asserted, and software is required to clear the bits which are to be processed. If we write ~(1 << bit), then we end up asserting every other interrupt except the one we're processing. So, we need to do a read-modify-write cycle to clear the asserted bit. However, any interrupts which occur in the middle of this cycle will also be written back as zero, which will also clear the new interrupts. The upshot of this is: there is _no_ way to safely clear down interrupts in this register (and other similarly behaving interrupt pending registers on this device.) The patch below at least stops us creating new interrupts. Signed-off-by:
-
Dave Jones authored
commit 88a693b5 upstream. =============================== [ INFO: suspicious RCU usage. ] 3.5.0-rc1+ #63 Not tainted ------------------------------- security/selinux/netnode.c:178 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by trinity-child1/8750: #0: (sel_netnode_lock){+.....}, at: [<ffffffff812d8f8a>] sel_netnode_sid+0x16a/0x3e0 stack backtrace: Pid: 8750, comm: trinity-child1 Not tainted 3.5.0-rc1+ #63 Call Trace: [<ffffffff810cec2d>] lockdep_rcu_suspicious+0xfd/0x130 [<ffffffff812d91d1>] sel_netnode_sid+0x3b1/0x3e0 [<ffffffff812d8e20>] ? sel_netnode_find+0x1a0/0x1a0 [<ffffffff812d24a6>] selinux_socket_bind+0xf6/0x2c0 [<ffffffff810cd1dd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff810cdb55>] ? lock_release_holdtime.part.9+0x15/0x1a0 [<ffffffff81093841>] ? lock_hrtimer_base+0x31/0x60 [<ffffffff812c9536>] security_socket_bind+0x16/0x20 [<ffffffff815550ca>] sys_bind+0x7a/0x100 [<ffffffff816c03d5>] ? sysret_check+0x22/0x5d [<ffffffff810d392d>] ? trace_hardirqs_on_caller+0x10d/0x1a0 [<ffffffff8133b09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816c03a9>] system_call_fastpath+0x16/0x1b This patch below does what Paul McKenney suggested in the previous thread. Signed-off-by:
Dave Jones <davej@redhat.com> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
David Henningsson authored
commit af02dde8 upstream. We found a new codec ID 292, and that just a simple quirk would enable sound output/input on this ALC292 chip. BugLink: https://bugs.launchpad.net/bugs/1081466Tested-by:
Acelan Kao <acelan.kao@canonical.com> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit 7ff34ad8 upstream. These are compatible with standard ALC269 parser. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 36c46ca4 upstream. Add valid patch size for family 16h processors. [ hpa: promoting to urgent/stable since it is hw enabling and trivial ] Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@amd.com> Acked-by:
Andreas Herrmann <herrmann.der.user@googlemail.com> Link: http://lkml.kernel.org/r/1353004910-2204-1-git-send-email-boris.ostrovsky@amd.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
H. Peter Anvin authored
commit cb57a2b4 upstream. Modules, in particular oprofile (and possibly other similar tools) need kernel_stack_pointer(), so export it using EXPORT_SYMBOL_GPL(). Cc: Yang Wei <wei.yang@windriver.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Jun Zhang <jun.zhang@intel.com> Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.comSigned-off-by:
-
Robert Richter authored
commit 10226238 upstream. In 32 bit the stack address provided by kernel_stack_pointer() may point to an invalid range causing NULL pointer access or page faults while in NMI (see trace below). This happens if called in softirq context and if the stack is empty. The address at ®s->sp is then out of range. Fixing this by checking if regs and ®s->sp are in the same stack context. Otherwise return the previous stack pointer stored in struct thread_info. If that address is invalid too, return address of regs. BUG: unable to handle kernel NULL pointer dereference at 0000000a IP: [<c1004237>] print_context_stack+0x6e/0x8d *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 4434, comm: perl Not tainted 3.6.0-rc3-oprofile-i386-standard-g4411a05 #4 Hewlett-Packard HP xw9400 Workstation/0A1Ch EIP: 0060:[<c1004237>] EFLAGS: 00010093 CPU: 0 EIP is at print_context_stack+0x6e/0x8d EAX: ffffe000 EBX: 0000000a ECX: f4435f94 EDX: 0000000a ESI: f4435f94 EDI: f4435f94 EBP: f5409ec0 ESP: f5409ea0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 0000000a CR3: 34ac9000 CR4: 000007d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process perl (pid: 4434, ti=f5408000 task=f5637850 task.ti=f4434000) Stack: 000003e8 ffffe000 00001ffc f4e39b00 00000000 0000000a f4435f94 c155198c f5409ef0 c1003723 c155198c f5409f04 00000000 f5409edc 00000000 00000000 f5409ee8 f4435f94 f5409fc4 00000001 f5409f1c c12dce1c 00000000 c155198c Call Trace: [<c1003723>] dump_trace+0x7b/0xa1 [<c12dce1c>] x86_backtrace+0x40/0x88 [<c12db712>] ? oprofile_add_sample+0x56/0x84 [<c12db731>] oprofile_add_sample+0x75/0x84 [<c12ddb5b>] op_amd_check_ctrs+0x46/0x260 [<c12dd40d>] profile_exceptions_notify+0x23/0x4c [<c1395034>] nmi_handle+0x31/0x4a [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c13950ed>] do_nmi+0xa0/0x2ff [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c13949e5>] nmi_stack_correct+0x28/0x2d [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c1003603>] ? do_softirq+0x4b/0x7f <IRQ> [<c102a06f>] irq_exit+0x35/0x5b [<c1018f56>] smp_apic_timer_interrupt+0x6c/0x7a [<c1394746>] apic_timer_interrupt+0x2a/0x30 Code: 89 fe eb 08 31 c9 8b 45 0c ff 55 ec 83 c3 04 83 7d 10 00 74 0c 3b 5d 10 73 26 3b 5d e4 73 0c eb 1f 3b 5d f0 76 1a 3b 5d e8 73 15 <8b> 13 89 d0 89 55 e0 e8 ad 42 03 00 85 c0 8b 55 e0 75 a6 eb cc EIP: [<c1004237>] print_context_stack+0x6e/0x8d SS:ESP 0068:f5409ea0 CR2: 000000000000000a ---[ end trace 62afee3481b00012 ]--- Kernel panic - not syncing: Fatal exception in interrupt V2: * add comments to kernel_stack_pointer() * always return a valid stack address by falling back to the address of regs Reported-by:
Yang Wei <wei.yang@windriver.com> Signed-off-by:
Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.comSigned-off-by:
-
Paul Bolle authored
commit 45171002 upstream. The Intel 82855PM host bridge / Mobility FireGL 9000 RV250 combination in an (outdated) ThinkPad T41 needs AGPMode 1 for suspend/resume (under KMS, that is). So add a quirk for it. (Change R250 to RV250 in comment for preceding quirk too.) Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 804cc4a0 upstream. The save struct is not initialized previously so explicitly mark the crtcs as not used when they are not in use. Signed-off-by:
-
majianpeng authored
commit 35f9ac2d upstream. If read_seqretry returned true and bbp was changed, it will write invalid address which can cause some serious problem. This bug was introduced by commit v3.0-rc7-130-g2699b672. So fix is suitable for 3.0.y thru 3.6.y. Reported-by: zhuwenfeng@kedacom.com Tested-by: zhuwenfeng@kedacom.com Signed-off-by:
Jianpeng Ma <majianpeng@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
majianpeng authored
commit ab05613a upstream. This bug was introduced by commit(v3.0-rc7-126-g2230dfe). So fix is suitable for 3.0.y thru 3.6.y. Signed-off-by:
-
Jan Kara authored
commit 7af11686 upstream. Calls into highlevel quota code cannot happen under the write lock. These calls take dqio_mutex which ranks above write lock. So drop write lock before calling back into quota code. Signed-off-by:
-
Jan Kara authored
commit 361d94a3 upstream. Calls into reiserfs journalling code and reiserfs_get_block() need to be protected with write lock. We remove write lock around calls to high level quota code in the next patch so these paths would suddently become unprotected. Signed-off-by:
-
Jan Kara authored
commit b9e06ef2 upstream. In reiserfs_quota_on() we do quite some work - for example unpacking tail of a quota file. Thus we have to hold write lock until a moment we call back into the quota code. Signed-off-by:
-
Jan Kara authored
commit 3bb3e1fc upstream. When remounting reiserfs dquot_suspend() or dquot_resume() can be called. These functions take dqonoff_mutex which ranks above write lock so we have to drop it before calling into quota code. Signed-off-by:
-
Al Viro authored
commit fae2ae2a upstream. If a signal handler is executed on altstack and another signal comes, we will end up with rt_sigreturn() on return from the second handler getting -EPERM from do_sigaltstack(). It's perfectly OK, since we are not asking to change the settings; in fact, they couldn't have been changed during the second handler execution exactly because we'd been on altstack all along. 64bit sigreturn on sparc treats any error from do_sigaltstack() as "SIGSEGV now"; we need to switch to the same semantics we are using on other architectures. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Clemens Ladisch authored
commit e99ddfde upstream. Commit 88a8516a (ALSA: usbaudio: implement USB autosuspend) added autosuspend code to all files making up the snd-usb-audio driver. However, midi.c is part of snd-usb-lib and is also used by other drivers, not all of which support autosuspend. Thus, calls to usb_autopm_get_interface() could fail, and this unexpected error would result in the MIDI output being completely unusable. Make it work by ignoring the error that is expected with drivers that do not support autosuspend. Reported-by:
Colin Fletcher <colin.m.fletcher@googlemail.com> Reported-by:
Devin Venable <venable.devin@gmail.com> Reported-by:
Dr Nick Bailey <nicholas.bailey@glasgow.ac.uk> Reported-by:
Jannis Achstetter <jannis_achstetter@web.de> Reported-by:
Rui Nuno Capela <rncbc@rncbc.org> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Dave Chinner authored
commit d69043c4 upstream. Error handling in xfs_buf_ioapply_map() does not handle IO reference counts correctly. We increment the b_io_remaining count before building the bio, but then fail to decrement it in the failure case. This leads to the buffer never running IO completion and releasing the reference that the IO holds, so at unmount we can leak the buffer. This leak is captured by this assert failure during unmount: XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 273 This is not a new bug - the b_io_remaining accounting has had this problem for a long, long time - it's just very hard to get a zero length bio being built by this code... Further, the buffer IO error can be overwritten on a multi-segment buffer by subsequent bio completions for partial sections of the buffer. Hence we should only set the buffer error status if the buffer is not already carrying an error status. This ensures that a partial IO error on a multi-segment buffer will not be lost. This part of the problem is a regression, however. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Mark Tinguely <tinguely@sgi.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Bing Zhao authored
commit dd321acd upstream. When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Bing Zhao authored
commit b1a47aa5 upstream. Reported by Tim Shepard: I was seeing sporadic failures (wedgeups), and the majority of those failures I saw printed the printouts in mwifiex_cmd_timeout_func with cmd = 0xe5 which is CMD_802_11_HS_CFG_ENH. When this happens, two minutes later I get notified that the rtcwake thread is blocked, like this: INFO: task rtcwake:3495 blocked for more than 120 seconds. To get the hung thread unblocked we wake up the cmd wait queue and cancel the ioctl. Reported-by:
Tim Shepard <shep@laptop.org> Signed-off-by:
-
Albert Pool authored
commit a485e827 upstream. This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102. Its FCC ID is the same. Signed-off-by:
Albert Pool <albertpool@solcon.nl> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
James Bottomley authored
commit 949a05d0 upstream. On Thu, 2012-11-01 at 16:45 -0700, Michel Lespinasse wrote: > Looking at the arch/parisc/kernel/sys_parisc.c implementation of > get_shared_area(), I do have a concern though. The function basically > ignores the pgoff argument, so that if one creates a shared mapping of > pages 0-N of a file, and then a separate shared mapping of pages 1-N > of that same file, both will have the same cache offset for their > starting address. > > This looks like this would create obvious aliasing issues. Am I > misreading this ? I can't understand how this could work good enough > to be undetected, so there must be something I'm missing here ??? This turns out to be correct and we need to pay attention to the pgoff as well as the address when creating the virtual address for the area. Fortunately, the bug is rarely triggered as most applications which use pgoff tend to use large values (git being the primary one, and it uses pgoff in multiples of 16MB) which are larger than our cache coherency modulus, so the problem isn't often seen in practise. Reported-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
-
Simon Wunderlich authored
commit b78a4932 upstream. The check whether the IBSS is active and can be removed should be performed before deinitializing the fields used for the check/search. Otherwise, the configured BSS will not be found and removed properly. To make it more clear for the future, rename sdata->u.ibss to the local pointer ifibss which is used within the checks. This behaviour was introduced by f3209bea ("mac80211: fix IBSS teardown race") Cc: Ignacy Gawedzki <i@lri.fr> Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Maciej Patelczyk authored
commit 49bd665c upstream. SATA MICROCODE DOWNALOAD fails on isci driver. After receiving Register Device to Host (FIS 0x34) frame Initiator resets phy. In the frame handler routine response (FIS 0x34) was copied into wrong buffer and upper layer did not receive any answer which resulted in timeout and reset. This patch corrects this bug. Signed-off-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by:
Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by:
-
