- 24 Jul, 2018 1 commit
-
-
David S. Miller authored
Merge tag 'mlx5e-updates-2018-07-18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-07-18 This series includes update for mlx5e net device driver. 1) From Feras Daoud, Added the support for firmware log tracing, first by introducing the firmware API needed for the task and then For each PF do the following: 1- Allocate memory for the tracer strings database and read it from the FW to the SW. 2- Allocate and dma map tracer buffers. Traces that will be written into the buffer will be parsed as a group of one or more traces, referred to as trace message. The trace message represents a C-like printf string. Once a new trace is available FW will generate an event indicates new trace/s are available and the driver will parse them and dump them using tracepoints event tracing Enable mlx5 fw tracing by: echo 1 > /sys/kernel/debug/tracing/events/mlx5/mlx5_fw/enable Read traces by: cat /sys/kernel/debug/tracing/trace 2) From Roi Dayan, Remove redundant WARN when we cannot find neigh entry 3) From Jianbo Liu, TC double vlan support - Support offloading tc double vlan headers match - Support offloading double vlan push/pop tc actions 4) From Boris, re-visit UDP GSO, remove the splitting of UDP_GSO_L4 packets in the driver, and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Jul, 2018 39 commits
-
-
Boris Pismenny authored
This patch removes the splitting of UDP_GSO_L4 packets in the driver, and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. Thus, the network stack is not responsible for splitting the packet into two. Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Jianbo Liu authored
As we can configure two push/pop actions in one flow table entry, add support to offload those double vlan actions in a rule to HW. Signed-off-by:
Jianbo Liu <jianbol@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jianbo Liu authored
Extract actions offloading code to a new function, and also extend data structures for double vlan actions. Signed-off-by:
-
Jianbo Liu authored
We can match on both outer and inner vlan tags, add support for offloading that. Signed-off-by:
-
Roi Dayan authored
It is possible for neigh entry not to exist if it was cleaned already. When we bring down an interface the neigh gets deleted but it could be that our listener for neigh event to clear the encap valid bit didn't start yet and the neigh update last used work is started first. In this scenario the encap entry has valid bit set but the neigh entry doesn't exist. Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
Signed-off-by: -
Feras Daoud authored
Add the tracer file to the makefile and add the init function to the load one flow. Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Feras Daoud authored
For each message the driver should do the following: 1- Find the message string in the strings database 2- Count the param number of each message 3- Wait for the param events and accumulate them 4- Calculate the event timestamp using the local event timestamp and the first timestamp event following it. 5- Print message to trace log Enable the tracing by: echo 1 > /sys/kernel/debug/tracing/events/mlx5/mlx5_fw/enable Read traces by: cat /sys/kernel/debug/tracing/trace Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
-
Feras Daoud authored
The tracer has one event, event 0x26, with two subtypes: - Subtype 0: Ownership change - Subtype 1: Traces available An ownership change occurs in the following cases: 1- Owner releases his ownership, in this case, an event will be sent to inform others to reattempt acquire ownership. 2- Ownership was taken by a higher priority tool, in this case the owner should understand that it lost ownership, and go through tear down flow. The second subtype indicates that there are traces in the trace buffer, in this case, the driver polls the tracer buffer for new traces, parse them and prepares the messages for printing. The HW starts tracing from the first address in the tracer buffer. Driver receives an event notifying that new trace block exists. HW posts a timestamp event at the last 8B of every 256B block. Comparing the timestamp to the last handled timestamp would indicate that this is a new trace block. Once the new timestamp is detected, the entire block is considered valid. Block validation and parsing, should be done after copying the current block to a different location, in order to avoid block overwritten during processing. Signed-off-by:
-
Saeed Mahameed authored
Create a memory key and protection domain for the tracer log buffer. Signed-off-by: -
Feras Daoud authored
For each PF do the following: 1- Allocate memory for the tracer strings database and read the strings from the FW to the SW. These strings will be used later for parsing traces. 2- Allocate and dma map tracer buffers. Traces that will be written into the buffer will be parsed as a group of one or more traces, referred to as trace message. The trace message represents a C-like printf string. First trace of a message holds the pointer to the correct string in strings database. The following traces holds the variables of the message. Signed-off-by:
-
Feras Daoud authored
Implement FW tracer logic and registers access, initialization and cleanup flows. Initializing the tracer will be part of load one flow, as multiple PFs will try to acquire ownership but only one will succeed and will be the tracer owner. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxSaeed Mahameed authored
mlx5 core infrastructure updates and fixes. From Eran: - Add MPEGC (Management PCIe General Configuration) registers and btis - Fix tristate and description for MLX5 module rom Feras: - Add hardware structures for the firmware tracer From Jainbo: - Core support for double vlan push/pop steering action From Max: - Add XRQ commands definitions From Noa: - Add missing SET_DRIVER_VERSION command translation From Roi: - Use ERR_CAST() instead of coding it From Tariq: - Better return types for CQE API Signed-off-by: -
David S. Miller authored
Bryan Whitehead says: ==================== lan743x: Add features to lan743x driver This patch series adds extra features to the lan743x driver. Updates for v4: Patch 6/8 - Modified get/set_wol to use super set of MAC and PHY driver support. Patch 7/9 - In set_eee, return the return value from phy_ethtool_set_eee. Updates for v3: Removed patch 9 from this series, regarding PTP support Patch 6/8 - Add call to phy_ethtool_get_wol to lan743x_ethtool_get_wol Patch 7/8 - Add call to phy_ethtool_set_eee on (!eee->eee_enabled) Updates for v2: Patch 3/9 - Used ARRAY_SIZE macro in lan743x_ethtool_get_ethtool_stats. Patch 5/9 - Used MAX_EEPROM_SIZE in lan743x_ethtool_set_eeprom. Patch 6/9 - Removed unnecessary read of PMT_CTL. Used CRC algorithm from lib. Removed PHY interrupt settings from lan743x_pm_suspend Change "#if CONFIG_PM" to "#ifdef CONFIG_PM" ==================== Signed-off-by: -
Bryan Whitehead authored
Implement RSS support Signed-off-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by:
-
Bryan Whitehead authored
Implement EEE support Signed-off-by:
-
Bryan Whitehead authored
Implement power management Supports suspend, resume, and Wake on LAN Signed-off-by:
-
Bryan Whitehead authored
Implement ethtool eeprom access Also provides access to OTP (One Time Programming) Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Bryan Whitehead authored
Implement ethtool message level Signed-off-by:
-
Bryan Whitehead authored
Implement ethtool statistics Signed-off-by:
-
Bryan Whitehead authored
Use default link setting functions Signed-off-by:
-
Bryan Whitehead authored
Implement ethtool get_drvinfo Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== sh_eth: clean up the TSU register accessors Here's a set of 5 patches against DaveM's 'net-next.git' repo. They do a final clean up of the TSU register accessors... ==================== Signed-off-by: -
Sergei Shtylyov authored
sh_eth_tsu_read_entry() is still asymmetric with sh_eth_tsu_write_entry() WRT their prototypes -- make them symmetric by passing to the former a TSU register offset instead of its address and also adding the (now necessary) 'ndev' parameter... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
We can add the TSU register base address to a TSU register offset right in sh_eth_tsu_write_entry(), no need to do it in its callers... Signed-off-by:
-
Sergei Shtylyov authored
With sh_eth_tsu_get_offset() now actually returning TSU register's offset, we can at last use it in sh_eth_tsu_{read|write}(). Somehow this saves 248 bytes of object code with AArch64 gcc 4.8.5... :-) Signed-off-by: -
Sergei Shtylyov authored
sh_eth_tsu_get_offset(), despite its name, returns a TSU register's address, not its offset. Make this function match its name and return a register's offset from the TSU registers base address instead. Signed-off-by:
-
Sergei Shtylyov authored
sh_eth_tsu_get_offset() is called several times by the driver, remove *inline* and move that function from the header to the driver itself to let gcc decide whether to expand it inline or not... Signed-off-by:
-
YueHaibing authored
qe_muram_alloc return a unsigned long integer,which should not compared with zero. check it using IS_ERR_VALUE() to fix this. Fixes: c19b6d24 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: patches 2018-07-23 here are some small patches for SMC: Just the first patch contains a functional change. It allows to differ between the modes SMCR and SMCD on s390 when monitoring SMC sockets. The remaining patches are cleanups without functional changes. ==================== Signed-off-by: -
Ursula Braun authored
The page map address is already stored in the RMB descriptor. There is no need to derive it from the cpu_addr value. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
Link group field tokens_used_mask is a bitmap. Use macro DECLARE_BITMAP for its definition. Signed-off-by:
-
Stefan Raspl authored
Replace a frequently used construct with a more readable variant, reducing the code. Also might come handy when we start to support more than a single per link group. Signed-off-by:
Stefan Raspl <raspl@linux.ibm.com> Signed-off-by:
-
Stefan Raspl authored
The functions to read and write cursors are exclusively used to copy cursors. Therefore switch to a respective function instead. Signed-off-by:
-
Karsten Graul authored
Rename field diag_fallback into diag_mode and set the smc mode of a connection explicitly. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Petr Machata authored
Support for device-only IPv6 multipath next hops was dropped in commit 33bd5ac5 ("net/ipv6: Revert attempt to simplify route replace and append") and as of commit b5d2d75e ("net/ipv6: Do not allow device only routes via the multipath API"), attempts to add a next hop like that yield an explicit diagnostic. Correspondingly, drop the IPv6 parts of GRE multipath test that are supposed to test that code. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
YueHaibing authored
Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: add support for backup port This set introduces a new bridge port option that allows any port to have any other port (in the same bridge of course) as its backup and traffic will be forwarded to the backup port when the primary goes down. This is mainly used in MLAG and EVPN setups where we have peerlink path which is a backup of many (or even all) ports and is a participating bridge port itself. There's more detailed information in patch 02. Patch 01 just prepares the port sysfs code for options that take raw value. The main issues that this set solves are scalability and fallback latency. We have used similar code for over 6 months now to bring the fallback latency of the backup peerlink down and avoid fdb notification storms. Also due to the nature of master devices such setup is currently not possible, and last but not least having tens of thousands of fdbs require thousands of calls to switch. I've also CCed our MLAG experts that have been using similar option. Roopa also adds: "Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink switch-peerlink becomes the failover/backport port when say team0 to the server goes down. Today, when team0 goes down, control plane has to withdraw all the fdb entries pointing to team0 and re-install the fdb entries pointing to switch-peerlink...and restore the fdb entries when team0 comes back up again. and this is the problem we are trying to solve. This also becomes necessary when multihoming is implemented by a standard like E-VPN https://tools.ietf.org/html/rfc8365#section-8 where the 'switch-peerlink' is an overlay vxlan port (like nikolay mentions in his patch commit). In these implementations, the fdb scale can be much larger. On why bond failover cannot be used here ?: the point that nikolay was alluding to is, switch-peerlink in the above example is a bridge port and is a failover/backport port for more than one or all ports in the bridge br0. And you cannot enslave switch-peerlink into a second level team with other bridge ports. Hence a multi layered team device is not an option (FWIW, switch-peerlink is also a teamed interface to the peer switch)." v3: Added Roopa's explanation and diagram v2: In patch 01 use kstrdup/kfree to avoid casting the const buf. In order to avoid using GFP_ATOMIC or always allocating I kept the spinlock inside each branch. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
