Skip to content

L
linux
Switch branch/tag
  1. 22 Jul, 2018 10 commits
    • Jonas Gorski's avatar
      bcm63xx_enet: do not write to random DMA channel on BCM6345 · b1c3ce0c
      Jonas Gorski authored 
      commit d6213c1f upstream.

The DMA controller regs actually point to DMA channel 0, so the write to
ENETDMA_CFG_REG will actually modify a random DMA channel.

Since DMA controller registers do not exist on BCM6345, guard the write
with the usual check for dma_has_sram.
Signed-off-by: default avatarJonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarAmit Pundir <amit.pundir@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b1c3ce0c
    • Jonas Gorski's avatar
      bcm63xx_enet: correct clock usage · b913a05a
      Jonas Gorski authored 
      commit 9c86b846 upstream.

Check the return code of prepare_enable and change one last instance of
enable only to prepare_enable. Also properly disable and release the
clock in error paths and on remove for enetsw.
Signed-off-by: default avatarJonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarAmit Pundir <amit.pundir@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b913a05a
    • alex chen's avatar
      ocfs2: ip_alloc_sem should be taken in ocfs2_get_block() · 1ccab2bf
      alex chen authored 
      commit 3e4c56d4 upstream.

ip_alloc_sem should be taken in ocfs2_get_block() when reading file in
DIRECT mode to prevent concurrent access to extent tree with
ocfs2_dio_end_io_write(), which may cause BUGON in the following
situation:

read file 'A'                                  end_io of writing file 'A'
vfs_read
 __vfs_read
  ocfs2_file_read_iter
   generic_file_read_iter
    ocfs2_direct_IO
     __blockdev_direct_IO
      do_blockdev_direct_IO
       do_direct_IO
        get_more_blocks
         ocfs2_get_block
          ocfs2_extent_map_get_blocks
           ocfs2_get_clusters
            ocfs2_get_clusters_nocache()
             ocfs2_search_extent_list
              return the index of record which
              contains the v_cluster, that is
              v_cluster > rec[i]->e_cpos.
                                                ocfs2_dio_end_io
                                                 ocfs2_dio_end_io_write
                                                  down_write(&oi->ip_alloc_sem);
                                                  ocfs2_mark_extent_written
                                                   ocfs2_change_extent_flag
                                                    ocfs2_split_extent
                                                     ...
                                                 --> modify the rec[i]->e_cpos, resulting
                                                     in v_cluster < rec[i]->e_cpos.
             BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos))

[alex.chen@huawei.com: v3]
  Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Fixes: c15471f7 ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: default avatarAlex Chen <alex.chen@huawei.com>
Reviewed-by: default avatarJun Piao <piaojun@huawei.com>
Reviewed-by: default avatarJoseph Qi <jiangqi903@gmail.com>
Reviewed-by: default avatarGang He <ghe@suse.com>
Acked-by: default avatarChangwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1ccab2bf
    • alex chen's avatar
      ocfs2: subsystem.su_mutex is required while accessing the item->ci_parent · c59a8f13
      alex chen authored 
      commit 853bc26a upstream.

The subsystem.su_mutex is required while accessing the item->ci_parent,
otherwise, NULL pointer dereference to the item->ci_parent will be
triggered in the following situation:

add node                     delete node
sys_write
 vfs_write
  configfs_write_file
   o2nm_node_store
    o2nm_node_local_write
                             do_rmdir
                              vfs_rmdir
                               configfs_rmdir
                                mutex_lock(&subsys->su_mutex);
                                unlink_obj
                                 item->ci_group = NULL;
                                 item->ci_parent = NULL;
	 to_o2nm_cluster_from_node
	  node->nd_item.ci_parent->ci_parent
	  BUG since of NULL pointer dereference to nd_item.ci_parent

Moreover, the o2nm_cluster also should be protected by the
subsystem.su_mutex.

[alex.chen@huawei.com: v2]
  Link: http://lkml.kernel.org/r/59EEAA69.9080703@huawei.com
Link: http://lkml.kernel.org/r/59E9B36A.10700@huawei.comSigned-off-by: default avatarAlex Chen <alex.chen@huawei.com>
Reviewed-by: default avatarJun Piao <piaojun@huawei.com>
Reviewed-by: default avatarJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c59a8f13
    • Chuck Lever's avatar
      xprtrdma: Fix corner cases when handling device removal · f5778c2d
      Chuck Lever authored 
      commit 25524288 upstream.

Michal Kalderon has found some corner cases around device unload
with active NFS mounts that I didn't have the imagination to test
when xprtrdma device removal was added last year.

- The ULP device removal handler is responsible for deallocating
  the PD. That wasn't clear to me initially, and my own testing
  suggested it was not necessary, but that is incorrect.

- The transport destruction path can no longer assume that there
  is a valid ID.

- When destroying a transport, ensure that ib_free_cq() is not
  invoked on a CQ that was already released.
Reported-by: default avatarMichal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd0318 ("xprtrdma: Support unplugging an HCA from ...")
Signed-off-by: default avatarChuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: default avatarAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: default avatarSudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f5778c2d
    • Prashanth Prakash's avatar
      cpufreq / CPPC: Set platform specific transition_delay_us · 1083a7e8
      Prashanth Prakash authored 
      commit d4f3388a upstream.

Add support to specify platform specific transition_delay_us instead
of using the transition delay derived from PCC.

With commit 3d41386d (cpufreq: CPPC: Use transition_delay_us
depending transition_latency) we are setting transition_delay_us
directly and not applying the LATENCY_MULTIPLIER. Because of that,
on Qualcomm Centriq we can end up with a very high rate of frequency
change requests when using the schedutil governor (default
rate_limit_us=10 compared to an earlier value of 10000).

The PCC subspace describes the rate at which the platform can accept
commands on the CPPC's PCC channel. This includes read and write
command on the PCC channel that can be used for reasons other than
frequency transitions. Moreover the same PCC subspace can be used by
multiple freq domains and deriving transition_delay_us from it as we
do now can be sub-optimal.

Moreover if a platform does not use PCC for desired_perf register then
there is no way to compute the transition latency or the delay_us.

CPPC does not have a standard defined mechanism to get the transition
rate or the latency at the moment.

Given the above limitations, it is simpler to have a platform specific
transition_delay_us and rely on PCC derived value only if a platform
specific value is not available.
Signed-off-by: default avatarPrashanth Prakash <pprakash@codeaurora.org>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Fixes: 3d41386d (cpufreq: CPPC: Use transition_delay_us depending transition_latency)
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarSudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1083a7e8
    • Filipe Manana's avatar
      Btrfs: fix duplicate extents after fsync of file with prealloc extents · 61a9f6b7
      Filipe Manana authored 
      commit 31d11b83 upstream.

In commit 471d557a ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay"), on fsync,  we started to always log all prealloc
extents beyond an inode's i_size in order to avoid losing them after a
power failure. However under some cases this can lead to the log replay
code to create duplicate extent items, with different lengths, in the
extent tree. That happens because, as of that commit, we can now log
extent items based on extent maps that are not on the "modified" list
of extent maps of the inode's extent map tree. Logging extent items based
on extent maps is used during the fast fsync path to save time and for
this to work reliably it requires that the extent maps are not merged
with other adjacent extent maps - having the extent maps in the list
of modified extents gives such guarantee.

Consider the following example, captured during a long run of fsstress,
which illustrates this problem.

We have inode 271, in the filesystem tree (root 5), for which all of the
following operations and discussion apply to.

A buffered write starts at offset 312391 with a length of 933471 bytes
(end offset at 1245862). At this point we have, for this inode, the
following extent maps with the their field values:

em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
      block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 376832, block_start 1106399232,
      block_len 376832, orig_block_len 376832
em C, start 417792, orig_start 417792, len 782336, block_start
      18446744073709551613, block_len 0, orig_block_len 0
em D, start 1200128, orig_start 1200128, len 835584, block_start
      1106776064, block_len 835584, orig_block_len 835584
em E, start 2035712, orig_start 2035712, len 245760, block_start
      1107611648, block_len 245760, orig_block_len 245760

Extent map A corresponds to a hole and extent maps D and E correspond to
preallocated extents.

Extent map D ends where extent map E begins (1106776064 + 835584 =
1107611648), but these extent maps were not merged because they are in
the inode's list of modified extent maps.

An fsync against this inode is made, which triggers the fast path
(BTRFS_INODE_NEEDS_FULL_SYNC is not set). This fsync triggers writeback
of the data previously written using buffered IO, and when the respective
ordered extent finishes, btrfs_drop_extents() is called against the
(aligned) range 311296..1249279. This causes a split of extent map D at
btrfs_drop_extent_cache(), replacing extent map D with a new extent map
D', also added to the list of modified extents,  with the following
values:

em D', start 1249280, orig_start of 1200128,
       block_start 1106825216 (= 1106776064 + 1249280 - 1200128),
       orig_block_len 835584,
       block_len 786432 (835584 - (1249280 - 1200128))

Then, during the fast fsync, btrfs_log_changed_extents() is called and
extent maps D' and E are removed from the list of modified extents. The
flag EXTENT_FLAG_LOGGING is also set on them. After the extents are logged
clear_em_logging() is called on each of them, and that makes extent map E
to be merged with extent map D' (try_merge_map()), resulting in D' being
deleted and E adjusted to:

em E, start 1249280, orig_start 1200128, len 1032192,
      block_start 1106825216, block_len 1032192,
      orig_block_len 245760

A direct IO write at offset 1847296 and length of 360448 bytes (end offset
at 2207744) starts, and at that moment the following extent maps exist for
our inode:

em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
      block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
      block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
      block_len 937984, orig_block_len 937984
em E (prealloc), start 1249280, orig_start 1200128, len 1032192,
      block_start 1106825216, block_len 1032192, orig_block_len 245760

The dio write results in drop_extent_cache() being called twice. The first
time for a range that starts at offset 1847296 and ends at offset 2035711
(length of 188416), which results in a double split of extent map E,
replacing it with two new extent maps:

em F, start 1249280, orig_start 1200128, block_start 1106825216,
      block_len 598016, orig_block_len 598016
em G, start 2035712, orig_start 1200128, block_start 1107611648,
      block_len 245760, orig_block_len 1032192

It also creates a new extent map that represents a part of the requested
IO (through create_io_em()):

em H, start 1847296, len 188416, block_start 1107423232, block_len 188416

The second call to drop_extent_cache() has a range with a start offset of
2035712 and end offset of 2207743 (length of 172032). This leads to
replacing extent map G with a new extent map I with the following values:

em I, start 2207744, orig_start 1200128, block_start 1107783680,
      block_len 73728, orig_block_len 1032192

It also creates a new extent map that represents the second part of the
requested IO (through create_io_em()):

em J, start 2035712, len 172032, block_start 1107611648, block_len 172032

The dio write set the inode's i_size to 2207744 bytes.

After the dio write the inode has the following extent maps:

em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
      block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
      block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
      block_len 937984, orig_block_len 937984
em F, start 1249280, orig_start 1200128, len 598016,
      block_start 1106825216, block_len 598016, orig_block_len 598016
em H, start 1847296, orig_start 1200128, len 188416,
      block_start 1107423232, block_len 188416, orig_block_len 835584
em J, start 2035712, orig_start 2035712, len 172032,
      block_start 1107611648, block_len 172032, orig_block_len 245760
em I, start 2207744, orig_start 1200128, len 73728,
      block_start 1107783680, block_len 73728, orig_block_len 1032192

Now do some change to the file, like adding a xattr for example and then
fsync it again. This triggers a fast fsync path, and as of commit
471d557a ("Btrfs: fix loss of prealloc extents past i_size after fsync
log replay"), we use the extent map I to log a file extent item because
it's a prealloc extent and it starts at an offset matching the inode's
i_size. However when we log it, we create a file extent item with a value
for the disk byte location that is wrong, as can be seen from the
following output of "btrfs inspect-internal dump-tree":

 item 1 key (271 EXTENT_DATA 2207744) itemoff 3782 itemsize 53
     generation 22 type 2 (prealloc)
     prealloc data disk byte 1106776064 nr 1032192
     prealloc data offset 1007616 nr 73728

Here the disk byte value corresponds to calculation based on some fields
from the extent map I:

  1106776064 = block_start (1107783680) - 1007616 (extent_offset)
  extent_offset = 2207744 (start) - 1200128 (orig_start) = 1007616

The disk byte value of 1106776064 clashes with disk byte values of the
file extent items at offsets 1249280 and 1847296 in the fs tree:

        item 6 key (271 EXTENT_DATA 1249280) itemoff 3568 itemsize 53
                generation 20 type 2 (prealloc)
                prealloc data disk byte 1106776064 nr 835584
                prealloc data offset 49152 nr 598016
        item 7 key (271 EXTENT_DATA 1847296) itemoff 3515 itemsize 53
                generation 20 type 1 (regular)
                extent data disk byte 1106776064 nr 835584
                extent data offset 647168 nr 188416 ram 835584
                extent compression 0 (none)
        item 8 key (271 EXTENT_DATA 2035712) itemoff 3462 itemsize 53
                generation 20 type 1 (regular)
                extent data disk byte 1107611648 nr 245760
                extent data offset 0 nr 172032 ram 245760
                extent compression 0 (none)
        item 9 key (271 EXTENT_DATA 2207744) itemoff 3409 itemsize 53
                generation 20 type 2 (prealloc)
                prealloc data disk byte 1107611648 nr 245760
                prealloc data offset 172032 nr 73728

Instead of the disk byte value of 1106776064, the value of 1107611648
should have been logged. Also the data offset value should have been
172032 and not 1007616.
After a log replay we end up getting two extent items in the extent tree
with different lengths, one of 835584, which is correct and existed
before the log replay, and another one of 1032192 which is wrong and is
based on the logged file extent item:

 item 12 key (1106776064 EXTENT_ITEM 835584) itemoff 3406 itemsize 53
    refs 2 gen 15 flags DATA
    extent data backref root 5 objectid 271 offset 1200128 count 2
 item 13 key (1106776064 EXTENT_ITEM 1032192) itemoff 3353 itemsize 53
    refs 1 gen 22 flags DATA
    extent data backref root 5 objectid 271 offset 1200128 count 1

Obviously this leads to many problems and a filesystem check reports many
errors:

 (...)
 checking extents
 Extent back ref already exists for 1106776064 parent 0 root 5 owner 271 offset 1200128 num_refs 1
 extent item 1106776064 has multiple extent items
 ref mismatch on [1106776064 835584] extent item 2, found 3
 Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 2 wanted 1 back 0x55b1d0ad7680
 Backref 1106776064 root 5 owner 271 offset 1200128 num_refs 0 not found in extent tree
 Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 1 wanted 0 back 0x55b1d0ad4e70
 Backref bytes do not match extent backref, bytenr=1106776064, ref bytes=835584, backref bytes=1032192
 backpointer mismatch on [1106776064 835584]
 checking free space cache
 block group 1103101952 has wrong amount of free space
 failed to load free space cache for block group 1103101952
 checking fs roots
 (...)

So fix this by logging the prealloc extents beyond the inode's i_size
based on searches in the subvolume tree instead of the extent maps.

Fixes: 471d557a ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarSudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      61a9f6b7
    • Nick Desaulniers's avatar
      x86/paravirt: Make native_save_fl() extern inline · edefb935
      Nick Desaulniers authored 
      commit d0a8d937 upstream.

native_save_fl() is marked static inline, but by using it as
a function pointer in arch/x86/kernel/paravirt.c, it MUST be outlined.

paravirt's use of native_save_fl() also requires that no GPRs other than
%rax are clobbered.

Compilers have different heuristics which they use to emit stack guard
code, the emittance of which can break paravirt's callee saved assumption
by clobbering %rcx.

Marking a function definition extern inline means that if this version
cannot be inlined, then the out-of-line version will be preferred. By
having the out-of-line version be implemented in assembly, it cannot be
instrumented with a stack protector, which might violate custom calling
conventions that code like paravirt rely on.

The semantics of extern inline has changed since gnu89. This means that
folks using GCC versions >= 5.1 may see symbol redefinition errors at
link time for subdirs that override KBUILD_CFLAGS (making the C standard
used implicit) regardless of this patch. This has been cleaned up
earlier in the patch set, but is left as a note in the commit message
for future travelers.

Reports:
 https://lkml.org/lkml/2018/5/7/534
 https://github.com/ClangBuiltLinux/linux/issues/16

Discussion:
 https://bugs.llvm.org/show_bug.cgi?id=37512
 https://lkml.org/lkml/2018/5/24/1371

Thanks to the many folks that participated in the discussion.
Debugged-by: default avatarAlistair Strachan <astrachan@google.com>
Debugged-by: default avatarMatthias Kaehlcke <mka@chromium.org>
Suggested-by: default avatarArnd Bergmann <arnd@arndb.de>
Suggested-by: default avatarH. Peter Anvin <hpa@zytor.com>
Suggested-by: default avatarTom Stellar <tstellar@redhat.com>
Reported-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
Tested-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Acked-by: default avatarJuergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-4-ndesaulniers@google.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      edefb935
    • H. Peter Anvin's avatar
      x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h> · 92e50158
      H. Peter Anvin authored 
      commit 0e2e1600 upstream.

i386 and x86-64 uses different registers for arguments; make them
available so we don't have to #ifdef in the actual code.

Native size and specified size (q, l, w, b) versions are provided.
Signed-off-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Reviewed-by: default avatarSedat Dilek <sedat.dilek@gmail.com>
Acked-by: default avatarJuergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-3-ndesaulniers@google.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      92e50158
    • Nick Desaulniers's avatar
      compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations · 779145a6
      Nick Desaulniers authored 
      commit d03db2bc upstream.

Functions marked extern inline do not emit an externally visible
function when the gnu89 C standard is used. Some KBUILD Makefiles
overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without
an explicit C standard specified, the default is gnu11. Since c99, the
semantics of extern inline have changed such that an externally visible
function is always emitted. This can lead to multiple definition errors
of extern inline functions at link time of compilation units whose build
files have removed an explicit C standard compiler flag for users of GCC
5.1+ or Clang.
Suggested-by: default avatarArnd Bergmann <arnd@arndb.de>
Suggested-by: default avatarH. Peter Anvin <hpa@zytor.com>
Suggested-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Acked-by: default avatarJuergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: sedat.dilek@gmail.com
Cc: thomas.lendacky@amd.com
Cc: tstellar@redhat.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-2-ndesaulniers@google.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      779145a6
  3. 17 Jul, 2018 30 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7