- 02 Feb, 2017 4 commits
-
-
Jan Kara authored
Currenly blk_get_backing_dev_info() is not safe to be called when the block device is not open as bdev->bd_disk is NULL in that case. However inode_to_bdi() uses this function and may be call called from flusher worker or other writeback related functions without bdev being open which leads to crashes such as: [113031.075540] Unable to handle kernel paging request for data at address 0x00000000 [113031.075614] Faulting instruction address: 0xc0000000003692e0 0:mon> t [c0000000fb65f900] c00000000036cb6c writeback_sb_inodes+0x30c/0x590 [c0000000fb65fa10] c00000000036ced4 __writeback_inodes_wb+0xe4/0x150 [c0000000fb65fa70] c00000000036d33c wb_writeback+0x30c/0x450 [c0000000fb65fb40] c00000000036e198 wb_workfn+0x268/0x580 [c0000000fb65fc50] c0000000000f3470 process_one_work+0x1e0/0x590 [c0000000fb65fce0] c0000000000f38c8 worker_thread+0xa8/0x660 [c0000000fb65fd80] c0000000000fc4b0 kthread+0x110/0x130 [c0000000fb65fe30] c0000000000098f0 ret_from_kernel_thread+0x5c/0x6c Signed-off-by:Jens Axboe <axboe@fb.com>
-
Jan Kara authored
Instead of storing backing_dev_info inside struct request_queue, allocate it dynamically, reference count it, and free it when the last reference is dropped. Currently only request_queue holds the reference but in the following patch we add other users referencing backing_dev_info. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jan Kara authored
Currently, block device inodes stay around after corresponding gendisk hash died until memory reclaim finds them and frees them. Since we will make block device inode pin the bdi, we want to free the block device inode as soon as the device goes away so that bdi does not stay around unnecessarily. Furthermore we need to avoid issues when new device with the same major,minor pair gets created since reusing the bdi structure would be rather difficult in this case. Unhashing block device inode on gendisk destruction nicely deals with these problems. Once last block device inode reference is dropped (which may be directly in del_gendisk()), the inode gets evicted. Furthermore if the major,minor pair gets reallocated, we are guaranteed to get new block device inode even if old block device inode is not yet evicted and thus we avoid issues with possible reuse of bdi. Reviewed-by:
-
- 01 Feb, 2017 6 commits
-
-
Josef Bacik authored
To prepare for dynamically adding new nbd devices to the system switch from using an array for the nbd devices and instead use an idr. This copies what loop does for keeping track of its devices. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
Since we are in the memory reclaim path we need our recv work to be on a workqueue that has WQ_MEM_RECLAIM set so we can avoid deadlocks. Also set WQ_HIGHPRI since we are in the completion path for IO. Signed-off-by:
-
Bart Van Assche authored
Replace the two debugfs_create_file() loops by a call to the new debugfs_create_files() function. Add an empty element at the end of the two attribute arrays such that the array size does not have to be passed to debugfs_create_files(). Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Bart Van Assche authored
Allow users to interrupt show operations instead of making a user space process unkillable if ownership of q->sysfs_lock cannot be obtained. Signed-off-by:
-
Bart Van Assche authored
Avoid that sparse reports the following complaints: block/elevator.c:541:29: warning: incorrect type in assignment (different base types) block/elevator.c:541:29: expected bool [unsigned] [usertype] next_sorted block/elevator.c:541:29: got restricted req_flags_t block/blk-mq-debugfs.c:92:54: warning: cast from restricted req_flags_t Signed-off-by:
-
Bart Van Assche authored
This patch avoids that sparse complains about lock imbalances. Signed-off-by:
-
- 31 Jan, 2017 15 commits
-
-
Jens Axboe authored
Since we removed cmd_type, we now have a hole in the struct. Move the internal_tag member to the same cacheline as tag, since we use them at the same time. This doesn't fix the hole, just moves it elsewhere. Signed-off-by: -
Christoph Hellwig authored
Instead of keeping two levels of indirection for requests types, fold it all into the operations. The little caveat here is that previously cmd_type only applied to struct request, while the request and bio op fields were set to plain REQ_OP_READ/WRITE even for passthrough operations. Instead this patch adds new REQ_OP_* for SCSI passthrough and driver private requests, althought it has to add two for each so that we can communicate the data in/out nature of the request. Signed-off-by:
-
Christoph Hellwig authored
Currently the legacy ide driver defines several request types of it's own, which is in the way of removing that field entirely. Instead add a type field to struct ide_request and use that to distinguish the different types of IDE-internal requests. It's a bit of a mess, but so is the surrounding code.. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Christoph Hellwig authored
This can be used to check for fs vs non-fs requests and basically removes all knowledge of BLOCK_PC specific from the block layer, as well as preparing for removing the cmd_type field in struct request. Signed-off-by:
-
Christoph Hellwig authored
This is where we do the rest of the request handling, which will become much simpler soon, too. Signed-off-by:
-
Christoph Hellwig authored
Disconnects don't use block layer requests these days, so all handling of private requests is dead code. Signed-off-by:
-
Christoph Hellwig authored
This driver will never see non-fs requests, and doesn't do anything else in the prep_fn. Signed-off-by:
-
Christoph Hellwig authored
This driver will never see non-fs requests, and doesn't do anything else in the prep_fn. Signed-off-by:
-
Christoph Hellwig authored
The block layer won't send requests the driver isn't asking for, so remove this check. Signed-off-by:
-
Christoph Hellwig authored
->done can only be called for fs requests, so no need to check again here. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
The SCSI passthrough idea was a a bad idea to start with (guess who came up with it?), and has been removed from the virtio 1.O spec, and is not enabled by defauly by any host I know of. Add a separate config option for it so that we don't need to enable it for most setups. That way any bugs related to it (like the one recently fixed for vmapped stacks) do not affect other users, and the size of the virtblk_req structure also shrinks significantly. Signed-off-by:
-
Christoph Hellwig authored
We can simply use blk_mq_rq_from_pdu to get back at the request at I/O completion time. Signed-off-by:
-
Christoph Hellwig authored
We only need this code to support scsi, ide, cciss and virtio. And at least for virtio it's a deprecated feature to start with. This should shrink the kernel size for embedded device that only use, say eMMC a bit. Signed-off-by:
-
Christoph Hellwig authored
This way there is no need to drag in a dependency on the BLOCK_PC code, which is going to become optional. Signed-off-by:
-
- 30 Jan, 2017 2 commits
-
-
Christoph Hellwig authored
The NVMe SCSI emulation doesn't use BLOCK_PC requests, so BLK_MAX_CDB doesn't have a meaning for it. Instead opencode the value of 16 and refactor the code a bit so that related checks are next to each other and we only need to use the value in one place. Signed-off-by:
-
Jens Axboe authored
Since we moved the cdb parts and define out of the block proper, we need to include scsi/scsi_request.h for the nvme scsi layer. Fixes: 82ed4db4 ("block: split scsi_request out of struct request") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 27 Jan, 2017 13 commits
-
-
Christoph Hellwig authored
These days we have the proper flags set since request allocation time. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Christoph Hellwig authored
And require all drivers that want to support BLOCK_PC to allocate it as the first thing of their private data. To support this the legacy IDE and BSG code is switched to set cmd_size on their queues to let the block layer allocate the additional space. Signed-off-by:
-
Christoph Hellwig authored
Simply the boilerplate code needed for bsg nodes a bit. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Christoph Hellwig authored
Rely on the new block layer functionality to allocate additional driver specific data behind struct request instead of implementing it in SCSI itѕelf. Signed-off-by:
-
Christoph Hellwig authored
Instead do an internal export of __scsi_init_queue for the transport classes that export BSG nodes. Signed-off-by:
-
Christoph Hellwig authored
There is no need for GFP_DMA allocations of the scsi_cmnd structures themselves, all that might be DMAed to or from is the actual payload, or the sense buffers. Signed-off-by:
-
Christoph Hellwig authored
Currently blk-mq always allocates the sense buffer using normal GFP_KERNEL allocation. Refactor the cmd pool code to split the cmd and sense allocation and share the code to allocate the sense buffers as well as the sense buffer slab caches between the legacy and blk-mq path. Note that this switches to lazy allocation of the sense slab caches - the slab caches (not the actual allocations) won't be destroy until the scsi module is unloaded instead of keeping track of hosts using them. Signed-off-by:
-
Christoph Hellwig authored
When using the slab allocator we already decide at cache creation time if an allocation comes from a GFP_DMA pool using the SLAB_CACHE_DMA flag, and there is no point passing the kmalloc-family only GFP_DMA flag to kmem_cache_alloc. Drop all the infrastructure for doing so. Signed-off-by:
-
Hannes Reinecke authored
Switch to scsi_execute_req_flags() instead of using the block interface directly. This will set REQ_QUIET and REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and should be able to send the command even if the device is quiesced. Signed-off-by:
-
Hannes Reinecke authored
Switch to scsi_execute_req_flags() and scsi_get_vpd_page() instead of open-coding it. Using scsi_execute_req_flags() will set REQ_QUIET and REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and should be able to send the command even if the device is quiesced. Signed-off-by:
-
Hannes Reinecke authored
Switch to scsi_execute_req_flags() and scsi_get_vpd_page() instead of open-coding it. Using scsi_execute_req_flags() will set REQ_QUIET and REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and should be able to send the command even if the device is quiesced. Signed-off-by:
-
Christoph Hellwig authored
DM already calls blk_mq_alloc_request on the request_queue of the underlying device if it is a blk-mq device. But now that we allow drivers to allocate additional data and initialize it ahead of time we need to do the same for all drivers. Doing so and using the new cmd_size infrastructure in the block layer greatly simplifies the dm-rq and mpath code, and should also make arbitrary combinations of SQ and MQ devices with SQ or MQ device mapper tables easily possible as a further step. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
DM tries to copy a few fields around for BLOCK_PC requests, but given that no dm-target ever wires up scsi_cmd_ioctl BLOCK_PC can't actually be sent to dm. Signed-off-by:
-
