- 28 Apr, 2021 1 commit
-
-
Jani Nikula authored
Add separate intel_dp_hdcp.h to go with intel_dp_hdcp.c, and rename the init function intel_dp_hdcp_init() to follow naming where function prefix matches the file name. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210427114520.4740-1-jani.nikula@intel.com
-
- 27 Apr, 2021 1 commit
-
-
Gwan-gyeong Mun authored
TGL PSR2 hardware tracking shows momentary flicker and screen shift if TGL Display stepping is B1 from A0. It has been fixed from TGL Display stepping C0. HSDES: 18015970021 HSDES: 2209313811 BSpec: 55378 v2: Add checking of PSR2 manual tracking (Jose) Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
- 26 Apr, 2021 3 commits
-
-
José Roberto de Souza authored
DP_PSR_EN_CFG bit 5 aka "Selective Update Region Scan Line Capture Indication" in eDP spec has a ambiguous name, so renaming to better match specification. While at it, replacing bit shit by BIT() macro and adding the version some registers were added to eDP specification. Cc: <dri-devel@lists.freedesktop.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
-
Imre Deak authored
We can handle the surface alignment of CCS and UV color planes for all modifiers at one place, so do this. An AUX color plane can be a CCS or a UV plane, use only the more specific query functions and remove is_aux_plane() becoming redundant. While at it add a TODO for linear UV color plane alignments. The spec requires this to be stride-in-bytes * 64 on all platforms, whereas the driver uses an alignment of 4k for gen<12 and 256k for gen>=12 for linear UV planes. v2: - Restore previous alignment for linear UV surfaces. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210421173220.3587009-1-imre.deak@intel.com
-
zuoqilin authored
Change 'befor' to 'before'. Signed-off-by:
zuoqilin <zuoqilin@yulong.com> [Jani: Fix comment marker placement while applying.] Signed-off-by:
-
- 23 Apr, 2021 1 commit
-
-
José Roberto de Souza authored
EDP_Y_COORDINATE_ENABLE became a reserved register in display 13. EDP_Y_COORDINATE_VALID have the same fate as EDP_Y_COORDINATE_ENABLE but as we don't need it, removing the macro definition of it. BSpec: 50422 Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
- 21 Apr, 2021 2 commits
-
-
Rodrigo Vivi authored
Although this abstraction removes the convenience of grepping for the file name, it: - makes addition easier. - makes it easier to tweak global path when experiments are needed. - get in sync with guc/huc, without getting overly abstracted. - allows future junction with CSR_VERSION for simplicity. - Enforces dmc file will never change this standard. v2: define DMC_PATH inside .c (Lucas) Cc: Fei Yang <fei.yang@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Kai-Heng Feng authored
Screen flickers on Innolux eDP 1.3 panel when clock rate 540000 is in use. According to the panel vendor, though clock rate 540000 is advertised, but the max clock rate it really supports is 270000. Ville Syrjälä mentioned that fast and narrow also breaks some eDP 1.4 panel, so use slow and wide training for all panels to resolve the issue. User also confirmed that the new strategy doesn't introduce any regression on XPS 9380. v2: - Use slow and wide for everything. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3384 References: https://gitlab.freedesktop.org/drm/intel/-/issues/272Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
- 20 Apr, 2021 10 commits
-
-
Ville Syrjälä authored
Use simpler sentences. Just say "enable foo" instead of "set foo to enabled" etc. Signed-off-by:
-
Ville Syrjälä authored
'enable ? "enable" : "disable"' is a fairly common pattern in our debug prints. Let's introduce a helper for it. Signed-off-by:
-
Ville Syrjälä authored
Now that we have the dbuf slice mask stored in the device info let's use it for for_each_dbuf_slice_in_mask*(). With this we cal also rip out intel_dbuf_size() and intel_dbuf_num_slices(). Signed-off-by:
-
Ville Syrjälä authored
Use intel_de_rmw() instead of hand rolling it. Signed-off-by:
-
Ville Syrjälä authored
Use intel_dbuf_slice_size() instead of hand rolling it. Also clean up some of the types. Signed-off-by:
-
Ville Syrjälä authored
Let's just store the dbuf slice information as a bitmask in the device info. Makes life a little easier later. Signed-off-by:
-
Ville Syrjälä authored
We always reserve the same 4 dbuf blocks for the bypass path allocation, so might as well do that when declaring the dbuf size. Signed-off-by:
-
Ville Syrjälä authored
Collect the related dbuf information into a struct. Signed-off-by:
-
Dan Carpenter authored
This code should propagate the error from intel_overlay_pin_fb() but currently it returns success. Fixes: 1b321026 ("drm/i915: Pass ww ctx to intel_pin_to_display_plane") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Jason Ekstrand authored
This fixes the following build error with GCC 11: In function ‘snb_wm_latency_quirk’, inlined from ‘ilk_setup_wm_latency’ at drivers/gpu/drm/i915/intel_pm.c:3109:3, inlined from ‘intel_init_pm’ at drivers/gpu/drm/i915/intel_pm.c:7695:3: drivers/gpu/drm/i915/intel_pm.c:3058:9: error: ‘intel_print_wm_latency’ reading 16 bytes from a region of size 10 [-Werror=stringop-overread] 3058 | intel_print_wm_latency(dev_priv, "Primary", dev_priv->wm.pri_latency); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/intel_pm.c: In function ‘intel_init_pm’: drivers/gpu/drm/i915/intel_pm.c:3058:9: note: referencing argument 3 of type ‘const u16 *’ {aka ‘const short unsigned int *’} drivers/gpu/drm/i915/intel_pm.c:2995:13: note: in a call to function ‘intel_print_wm_latency’ 2995 | static void intel_print_wm_latency(struct drm_i915_private *dev_priv, | ^~~~~~~~~~~~~~~~~~~~~~ As far as I can tell, we don't actually need 8 elements except on SKL and that uses dev_priv->wm.skl_latency which has enough. Signed-off-by:Jason Ekstrand <jason@jlekstrand.net> Reviewed-by:
-
- 19 Apr, 2021 3 commits
-
-
Rodrigo Vivi authored
Merge tag 'topic/intel-gen-to-ver-2021-04-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Gen to ver conversions across the driver The main change is Lucas' series [1], with Ville's GLK fixes [2] and a cherry-pick of Matt's commit [3] from drm-intel-next as a base to avoid conflicts. [1] https://patchwork.freedesktop.org/series/88825/ [2] https://patchwork.freedesktop.org/series/88938/ [3] 70bfb307 ("drm/i915/display: Eliminate IS_GEN9_{BC,LP}") Signed-off-by:
-
Ville Syrjälä authored
Replace the hand rolled pfit downscale calculations with intel_adjusted_rate(). Signed-off-by:
-
Ville Syrjälä authored
Extract a small helper to calculate the downscaling adjusted pixel rate/data rate/etc. v2: Drop the plane visibility check and add a comment explaining why Reviewed-by:
-
- 15 Apr, 2021 1 commit
-
-
José Roberto de Souza authored
Fix redundant condition, caught in cppcheck by kernel test robot. Reported-by:
kernel test robot <lkp@intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Fixes: b64d6c51 ("drm/i915/display: Support PSR Multiple Instances") Signed-off-by:
Harish Chegondi <harish.chegondi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210409231738.238682-1-jose.souza@intel.com
-
- 14 Apr, 2021 18 commits
-
-
Imre Deak authored
The address-of op in front of an array is just an alias to using the array on its own, so drop the op. Signed-off-by:
-
Imre Deak authored
In case AUX failures happen unexpectedly during a modeset, the driver should still complete the modeset. In particular the driver should perform the link training sequence steps even in case of an AUX failure, as this sequence also includes port initialization steps. Not doing that can leave the port/pipe in a broken state and lead for instance to a flip done timeout. Fix this by continuing with link training (in a no-LTTPR mode) if the DPRX DPCD readout failed for some reason at the beginning of link training. After a successful connector detection we already have the DPCD read out and cached, so the failed repeated read for it should not cause a problem. Note that a partial AUX read could in theory partly overwrite the cached DPCD (and return error) but this overwrite should not happen if the returned values are corrupted (due to a timeout or some other IO error). Kudos to Ville to root cause the problem. Fixes: 264613b4 ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4") References: https://gitlab.freedesktop.org/drm/intel/-/issues/3308 Cc: stable@vger.kernel.org # 5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Lucas De Marchi authored
Make them independent so we can use DGFX_FEATURES more generically. For future platforms that do not use the GEN nomenclature we will define graphics, media and display separately, so we avoid setting graphics_ver with the GEN() macro. Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Since we are now converting from a single gen version to graphics_ver, media_ver and display_ver, add the last 2 when printing the device info. Reviewed-by:
-
Lucas De Marchi authored
Now that it's not being used anymore, finish its removal. Like for gen_mask, we replace INTEL_GEN() and IS_GEN() macros to use the new field. Reviewed-by:
-
Lucas De Marchi authored
Replace gen with the new graphics_ver value and use GRAPHICS_VER() in those places. Reviewed-by:
-
Lucas De Marchi authored
Now that it's not used anywhere, remove it from struct intel_device_info. To allow a period in which code will be converted to the new macro, keep IS_GEN_RANGE() around, just redefining it to use the new fields. The size advantage from IS_GEN_RANGE() using a mask is not that big as it has pretty limited use througout the driver: text data bss dec hex filename 2758497 95965 6496 2860958 2ba79e drivers/gpu/drm/i915/i915.ko.old 2758586 95953 6496 2861035 2ba7eb drivers/gpu/drm/i915/i915.ko.new Reviewed-by:
-
Lucas De Marchi authored
Remove the remaining uses of INTEL_GEN_MASK() and the correspondent gen_mask in struct intel_device_info. This will allow the removal of gen_mask later since it's incompatible with the new per-IP versioning scheme. Reviewed-by:
-
Lucas De Marchi authored
Since its introduction 2 years ago, we never used the mask to span more than one gen. Replace gen_mask a single number and start using the new GRAPHICS_VER(). Reviewed-by:
-
Lucas De Marchi authored
Start using the new fields graphics_version for the previous gen checks. Here we rename the "gen" field and replace the comparisons using it to start using the new GRAPHICS_VER(). Other uses of INTEL_GEN() were left as is for automatic conversion later. Reviewed-by:
-
Lucas De Marchi authored
Like it was done in commit 01eb15c9 ("drm/i915: Add DISPLAY_VER() and related macros") add the correspondent macros for graphics and media. Going forward we will prefer checking the versions for the specific IPs (graphics, media and display) rather than grouping everything under a "gen" version. For consistency and to make the maintenance easier, it'd be preferred not to mix the *GEN* macros with the new ones. For older platforms we can simply consider that the previous "gen" number will extend to all 3 IPs. Then we can start replacing its use in the driver. Right now this replacement is not done and only the infrastructure is put in place. We also leave gen and gen_mask inside struct intel_device_info while it's still being used throughout the code. v2: Repurpose IS_{GRAPHICS,MEDIA}_VER() macros to work with a range Signed-off-by:
-
Lucas De Marchi authored
While converting the rest of the driver to use GRAPHICS_VER() and MEDIA_VER(), following what was done for display, some discussions went back on what we did for display: 1) Why is the == comparison special that deserves a separate macro instead of just getting the version and comparing directly like is done for >, >=, <=? 2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for brevity. If we remove the current users of IS_DISPLAY_VER(), we could actually repurpose it for a range check With (1) there could be an advantage if we used gen_mask since multiple conditionals be combined by the compiler in a single and instruction and check the result. However a) INTEL_GEN() doesn't use the mask since it would make the code bigger everywhere else and b) in the cases it made sense, it also made sense to convert to the _RANGE() variant. So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER() users to use == and != operators. Aside from the definition changes, this was done by the following semantic patch: @@ expression dev_priv, E1; @@ - !IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) != E1 @@ expression dev_priv, E1; @@ - IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) == E1 @@ expression dev_priv, from, until; @@ - IS_DISPLAY_RANGE(dev_priv, from, until) + IS_DISPLAY_VER(dev_priv, from, until) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Lucas De Marchi authored
The macro we use to check is called DISPLAY_VER(). While using this macro and the new ones being added in following changes I made the mistake multiple times when mixing both "ver" and "version". Although it's usually better to prefer the complete name, the shorhand DISPLAY_VER() / GRAPHICS_VER / MEDIA_VER are clear and cause less visual polution. Another issue is when copying the variable to other places. "display.version" would be copied to a "display_version" variable which is long and would make people abbreviate as "version", or "display_ver". In the first case it's not always clear what version refers to, and in the second case it just hints it should be the name in the first place. So, in the same way use used "gen" rather than "generation", use "ver" instead of "version". Signed-off-by:
-
Lucas De Marchi authored
Commit 989634fb ("drm/i915/audio: set HDA link parameters in driver") added INTEL_GEN() in the display code, where it should actually be using DISPLAY_VER(). Switch to the new macro. Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
Now that glk display version is 10 we can drop a few more glk checks. Reviewed-by:
-
Ville Syrjälä authored
Just let bxt/glk fall back to intel_hpd_pin_default() instead of using skl_hpd_pin() or cnl_hpd_pin(). Doesn't really matter since both functions will end up returning the correct hpd pin anyway, but I find it a bit less confusing when bxt/glk are fully separated from the logic for the other platforms. Reviewed-by:
-
Ville Syrjälä authored
The glk display version change is causing us to again attempt LTTPR detection on glk. We must not do tha since glk doesn't have a long enough AUX timeout. Restore the correct logic to skip the detection. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by:
-
Ville Syrjälä authored
We lost a CCS related w/a on glk when the display version became 10 instead of 9. Restore the correct check. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by:
-
