- 24 Jan, 2024 5 commits
-
-
George Guo authored
- Correct comments for nlpid, family, udlen and udata in struct nft_table, and afinfo is no longer a member of enum nft_set_class. - Add comment for data in struct nft_set_elem. - Add comment for flags in struct nft_ctx. - Add comments for timeout in struct nft_set_iter, and flags is not a member of struct nft_set_iter, remove the comment for it. - Add comments for commit, abort, estimate and gc_init in struct nft_set_ops. - Add comments for pending_update, num_exprs, exprs and catchall_list in struct nft_set. - Add comment for ext_len in struct nft_set_ext_tmpl. - Add comment for inner_ops in struct nft_expr_type. - Add comments for clone, destroy_clone, reduce, gc, offload, offload_action, offload_stats in struct nft_expr_ops. - Add comments for blob_gen_0, blob_gen_1, bound, genmask, udlen, udata, blob_next in struct nft_chain. - Add comment for flags in struct nft_base_chain. - Add comments for udlen, udata in struct nft_object. - Add comment for type in struct nft_object_ops. - Add comment for hook_list in struct nft_flowtable, and remove comments for dev_name and ops which are not members of struct nft_flowtable. Signed-off-by:
George Guo <guodongtai@kylinos.cn> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Ido Schimmel authored
When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted. This results in a memory leak [1] which can be reproduced using [2]. Fix by introducing a 'tmplt_reoffload' operation and have the stack invoke it with the appropriate arguments as part of the replay. Implement the operation in the sole classifier that supports chain templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}' command based on whether a flow offload callback is being bound to a filter block or being unbound from one. As far as I can tell, the issue happens since cited commit which reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains() in __tcf_block_put(). The order cannot be reversed as the filter block is expected to be freed after flushing all the chains. [1] unreferenced object 0xffff888107e28800 (size 2048): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[...... 01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................ backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab374e>] __kmalloc+0x4e/0x90 [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0 unreferenced object 0xffff88816d2c0400 (size 1024): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): 40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8..... 10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m.... backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90 [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0 [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0 [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [2] # tc qdisc add dev swp1 clsact # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32 # tc qdisc del dev swp1 clsact # devlink dev reload pci/0000:06:00.0 Fixes: bbf73830 ("net: sched: traverse chains in block with tcf_get_next_chain()") Signed-off-by:Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We are missing a lot of config options from net selftests, it seems: tun/tap: CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP fib_tests: CONFIG_NET_SCH_FQ_CODEL l2tp: CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH sctp-vrf: CONFIG_INET_DIAG txtimestamp: CONFIG_NET_CLS_U32 vxlan_mdb: CONFIG_BRIDGE_VLAN_FILTERING gre_gso: CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE srv6_end_dt*_l3vpn: CONFIG_IPV6_SEG6_LWTUNNEL ip_local_port_range: CONFIG_MPTCP fib_test: CONFIG_NET_CLS_BASIC rtnetlink: CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE CONFIG_NET_IPGRE, CONFIG_BONDING fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING vxlan_mdb: CONFIG_NET_ACT_GACT tls: CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305 psample: CONFIG_PSAMPLE fcnal: CONFIG_TCP_MD5SIG Try to add them in a semi-alphabetical order. Fixes: 62199e3f ("selftests: net: Add VXLAN MDB test") Fixes: c12e0d5f ("self-tests: introduce self-tests for RPS default mask") Fixes: 122db5e3 ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE") Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.orgSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Michael Kelley authored
Current code in netvsc_drv_init() incorrectly assumes that PAGE_SIZE is 4 Kbytes, which is wrong on ARM64 with 16K or 64K page size. As a result, the default VMBus ring buffer size on ARM64 with 64K page size is 8 Mbytes instead of the expected 512 Kbytes. While this doesn't break anything, a typical VM with 8 vCPUs and 8 netvsc channels wastes 120 Mbytes (8 channels * 2 ring buffers/channel * 7.5 Mbytes/ring buffer). Unfortunately, the module parameter specifying the ring buffer size is in units of 4 Kbyte pages. Ideally, it should be in units that are independent of PAGE_SIZE, but backwards compatibility prevents changing that now. Fix this by having netvsc_drv_init() hardcode 4096 instead of using PAGE_SIZE when calculating the ring buffer size in bytes. Also use the VMBUS_RING_SIZE macro to ensure proper alignment when running with page size larger than 4K. Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 7aff79e2 ("Drivers: hv: Enable Hyper-V code to be built on ARM64") Signed-off-by:
Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240122162028.348885-1-mhklinux@outlook.comSigned-off-by:
-
Rahul Rameshbabu authored
This reverts commit b34ab352. Using skb_ensure_writable_head_tail without a call to skb_unshare causes the MACsec stack to operate on the original skb rather than a copy in the macsec_encrypt path. This causes the buffer to be exceeded in space, and leads to warnings generated by skb_put operations. Opting to revert this change since skb_copy_expand is more efficient than skb_ensure_writable_head_tail followed by a call to skb_unshare. Log: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:2464! invalid opcode: 0000 [#1] SMP KASAN CPU: 21 PID: 61997 Comm: iperf3 Not tainted 6.7.0-rc8_for_upstream_debug_2024_01_07_17_05 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_put+0x113/0x190 Code: 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 70 3b 9d bc 00 00 00 77 0e 48 83 c4 08 4c 89 e8 5b 5d 41 5d c3 <0f> 0b 4c 8b 6c 24 20 89 74 24 04 e8 6d b7 f0 fe 8b 74 24 04 48 c7 RSP: 0018:ffff8882694e7278 EFLAGS: 00010202 RAX: 0000000000000025 RBX: 0000000000000100 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ffff88816ae0bad4 RBP: ffff88816ae0ba60 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88811ba5abfa R13: ffff8882bdecc100 R14: ffff88816ae0ba60 R15: ffff8882bdecc0ae FS: 00007fe54df02740(0000) GS:ffff88881f080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe54d92e320 CR3: 000000010a345003 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die+0x33/0x90 ? skb_put+0x113/0x190 ? do_trap+0x1b4/0x3b0 ? skb_put+0x113/0x190 ? do_error_trap+0xb6/0x180 ? skb_put+0x113/0x190 ? handle_invalid_op+0x2c/0x30 ? skb_put+0x113/0x190 ? exc_invalid_op+0x2b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? skb_put+0x113/0x190 ? macsec_start_xmit+0x4e9/0x21d0 macsec_start_xmit+0x830/0x21d0 ? get_txsa_from_nl+0x400/0x400 ? lock_downgrade+0x690/0x690 ? dev_queue_xmit_nit+0x78b/0xae0 dev_hard_start_xmit+0x151/0x560 __dev_queue_xmit+0x1580/0x28f0 ? check_chain_key+0x1c5/0x490 ? netdev_core_pick_tx+0x2d0/0x2d0 ? __ip_queue_xmit+0x798/0x1e00 ? lock_downgrade+0x690/0x690 ? mark_held_locks+0x9f/0xe0 ip_finish_output2+0x11e4/0x2050 ? ip_mc_finish_output+0x520/0x520 ? ip_fragment.constprop.0+0x230/0x230 ? __ip_queue_xmit+0x798/0x1e00 __ip_queue_xmit+0x798/0x1e00 ? __skb_clone+0x57a/0x760 __tcp_transmit_skb+0x169d/0x3490 ? lock_downgrade+0x690/0x690 ? __tcp_select_window+0x1320/0x1320 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 ? tcp_small_queue_check.isra.0+0x120/0x3d0 tcp_write_xmit+0x12b6/0x7100 ? skb_page_frag_refill+0x1e8/0x460 __tcp_push_pending_frames+0x92/0x320 tcp_sendmsg_locked+0x1ed4/0x3190 ? tcp_sendmsg_fastopen+0x650/0x650 ? tcp_sendmsg+0x1a/0x40 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x286/0x400 tcp_sendmsg+0x28/0x40 ? inet_send_prepare+0x1b0/0x1b0 __sock_sendmsg+0xc5/0x190 sock_write_iter+0x222/0x380 ? __sock_sendmsg+0x190/0x190 ? kfree+0x96/0x130 vfs_write+0x842/0xbd0 ? kernel_write+0x530/0x530 ? __fget_light+0x51/0x220 ? __fget_light+0x51/0x220 ksys_write+0x172/0x1d0 ? update_socket_protocol+0x10/0x10 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x286/0x400 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7fe54d9018b7 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdbd4191d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000025 RCX: 00007fe54d9018b7 RDX: 0000000000000025 RSI: 0000000000d9859c RDI: 0000000000000004 RBP: 0000000000d9859c R08: 0000000000000004 R09: 0000000000000000 R10: 00007fe54d80afe0 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000025 R14: 00007fe54e00ec00 R15: 0000000000d982a0 </TASK> Modules linked in: 8021q garp mrp iptable_raw bonding vfio_pci rdma_ucm ib_umad mlx5_vfio_pci mlx5_ib vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ip_gre nf_tables ipip tunnel4 ib_ipoib ip6_gre gre ip6_tunnel tunnel6 geneve openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core zram zsmalloc fuse [last unloaded: ib_uverbs] ---[ end trace 0000000000000000 ]--- Cc: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20240118191811.50271-1-rrameshbabu@nvidia.comSigned-off-by:
-
- 23 Jan, 2024 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.8-rc2 The most visible fix here is the ath11k crash fix which was introduced in v6.7. We also have a fix for iwlwifi memory corruption and few smaller fixes in the stack. * tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix race condition on enabling fast-xmit wifi: iwlwifi: fix a memory corruption wifi: mac80211: fix potential sta-link leak wifi: cfg80211/mac80211: remove dependency on non-existing option wifi: cfg80211: fix missing interfaces when dumping wifi: ath11k: rely on mac80211 debugfs handling for vif wifi: p54: fix GCC format truncation warning with wiphy->fw_version ==================== Link: https://lore.kernel.org/r/20240122153434.E0254C433C7@smtp.kernel.orgSigned-off-by:
-
Zhengchao Shao authored
In commit 198bc90e("tcp: make sure init the accept_queue's spinlocks once"), the spinlocks of accept_queue are initialized only when socket is created in the inet4 scenario. The locks are not initialized when socket is created in the inet6 scenario. The kernel reports the following error: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107) register_lock_class (kernel/locking/lockdep.c:1289) __lock_acquire (kernel/locking/lockdep.c:5015) lock_acquire.part.0 (kernel/locking/lockdep.c:5756) _raw_spin_lock_bh (kernel/locking/spinlock.c:178) inet_csk_listen_stop (net/ipv4/inet_connection_sock.c:1386) tcp_disconnect (net/ipv4/tcp.c:2981) inet_shutdown (net/ipv4/af_inet.c:935) __sys_shutdown (./include/linux/file.h:32 net/socket.c:2438) __x64_sys_shutdown (net/socket.c:2445) do_syscall_64 (arch/x86/entry/common.c:52) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f52ecd05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007f52ecf5dde8 EFLAGS: 00000293 ORIG_RAX: 0000000000000030 RAX: ffffffffffffffda RBX: 00007f52ecf5e640 RCX: 00007f52ecd05a3d RDX: 00007f52ecc8b188 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007f52ecf5de20 R08: 00007ffdae45c69f R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f52ecf5e640 R13: 0000000000000000 R14: 00007f52ecc8b060 R15: 00007ffdae45c6e0 Fixes: 198bc90e ("tcp: make sure init the accept_queue's spinlocks once") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240122102001.2851701-1-shaozhengchao@huawei.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Zhengchao Shao authored
I analyze the potential sleeping issue of the following processes: Thread A Thread B ... netlink_create //ref = 1 do_mq_notify ... sock = netlink_getsockbyfilp ... //ref = 2 info->notify_sock = sock; ... ... netlink_sendmsg ... skb = netlink_alloc_large_skb //skb->head is vmalloced ... netlink_unicast ... sk = netlink_getsockbyportid //ref = 3 ... netlink_sendskb ... __netlink_sendskb ... skb_queue_tail //put skb to sk_receive_queue ... sock_put //ref = 2 ... ... ... netlink_release ... deferred_put_nlk_sk //ref = 1 mqueue_flush_file spin_lock remove_notification netlink_sendskb sock_put //ref = 0 sk_free ... __sk_destruct netlink_sock_destruct skb_queue_purge //get skb from sk_receive_queue ... __skb_queue_purge_reason kfree_skb_reason __kfree_skb ... skb_release_all skb_release_head_state netlink_skb_destructor vfree(skb->head) //sleeping while holding spinlock In netlink_sendmsg, if the memory pointed to by skb->head is allocated by vmalloc, and is put to sk_receive_queue queue, also the skb is not freed. When the mqueue executes flush, the sleeping bug will occur. Use vfree_atomic instead of vfree in netlink_skb_destructor to solve the issue. Fixes: c05cdb1b ("netlink: allow large data transfers from user-space") Signed-off-by: -
Kuniyuki Iwashima authored
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to fire somewhat randomly. # # RUN so_incoming_cpu.before_reuseport.test3 ... # # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0) # # test3: Test terminated by assertion # # FAIL so_incoming_cpu.before_reuseport.test3 # not ok 3 so_incoming_cpu.before_reuseport.test3 When the test failed, not-yet-accepted CLOSE_WAIT sockets received SYN with a "challenging" SEQ number, which was sent from an unexpected CPU that did not create the receiver. The test basically does: 1. for each cpu: 1-1. create a server 1-2. set SO_INCOMING_CPU 2. for each cpu: 2-1. set cpu affinity 2-2. create some clients 2-3. let clients connect() to the server on the same cpu 2-4. close() clients 3. for each server: 3-1. accept() all child sockets 3-2. check if all children have the same SO_INCOMING_CPU with the server The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse. In a loop of 2., close() changed the client state to FIN_WAIT_2, and the peer transitioned to CLOSE_WAIT. In another loop of 2., connect() happened to select the same port of the FIN_WAIT_2 socket, and it was reused as the default value of net.ipv4.tcp_tw_reuse is 2. As a result, the new client sent SYN to the CLOSE_WAIT socket from a different CPU, and the receiver's sk_incoming_cpu was overwritten with unexpected CPU ID. Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket responded with Challenge ACK. The new client properly returned RST and effectively killed the CLOSE_WAIT socket. This way, all clients were created successfully, but the error was detected later by 3-2., ASSERT_EQ(cpu, i). To avoid the failure, let's make sure that (i) the number of clients is less than the number of available ports and (ii) such reuse never happens. Fixes: 6df96146 ("selftest: Add test for SO_INCOMING_CPU.") Reported-by:Kuniyuki Iwashima <kuniyu@amazon.com> Tested-by:
-
Salvatore Dipietro authored
On CPUs with weak memory models, reads and updates performed by tcp_push to the sk variables can get reordered leaving the socket throttled when it should not. The tasklet running tcp_wfree() may also not observe the memory updates in time and will skip flushing any packets throttled by tcp_push(), delaying the sending. This can pathologically cause 40ms extra latency due to bad interactions with delayed acks. Adding a memory barrier in tcp_push removes the bug, similarly to the previous commit bf06200e ("tcp: tsq: fix nonagle handling"). smp_mb__after_atomic() is used to not incur in unnecessary overhead on x86 since not affected. Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and Apache Tomcat 9.0.83 running the basic servlet below: import java.io.IOException; import java.io.OutputStreamWriter; import java.io.PrintWriter; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; public class HelloWorldServlet extends HttpServlet { @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=utf-8"); OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8"); String s = "a".repeat(3096); osw.write(s,0,s.length()); osw.flush(); } } Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS c6i.8xlarge instance. Before the patch an additional 40ms latency from P99.99+ values is observed while, with the patch, the extra latency disappears. No patch and tcp_autocorking=1 ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello ... 50.000% 0.91ms 75.000% 1.13ms 90.000% 1.46ms 99.000% 1.74ms 99.900% 1.89ms 99.990% 41.95ms <<< 40+ ms extra latency 99.999% 48.32ms 100.000% 48.96ms With patch and tcp_autocorking=1 ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello ... 50.000% 0.90ms 75.000% 1.13ms 90.000% 1.45ms 99.000% 1.72ms 99.900% 1.83ms 99.990% 2.11ms <<< no 40+ ms extra latency 99.999% 2.53ms 100.000% 2.62ms Patch has been also tested on x86 (m7i.2xlarge instance) which it is not affected by this issue and the patch doesn't introduce any additional delay. Fixes: 7aa5470c ("tcp: tsq: move tsq_flags close to sk_wmem_alloc") Signed-off-by:
Salvatore Dipietro <dipiets@amazon.com> Reviewed-by:
-
- 22 Jan, 2024 11 commits
-
-
Sharath Srinivasan authored
Syzcaller UBSAN crash occurs in rds_cmsg_recv(), which reads inc->i_rx_lat_trace[j + 1] with index 4 (3 + 1), but with array size of 4 (RDS_RX_MAX_TRACES). Here 'j' is assigned from rs->rs_rx_trace[i] and in-turn from trace.rx_trace_pos[i] in rds_recv_track_latency(), with both arrays sized 3 (RDS_MSG_RX_DGRAM_TRACE_MAX). So fix the off-by-one bounds check in rds_recv_track_latency() to prevent a potential crash in rds_cmsg_recv(). Found by syzcaller: ================================================================= UBSAN: array-index-out-of-bounds in net/rds/recv.c:585:39 index 4 is out of range for type 'u64 [4]' CPU: 1 PID: 8058 Comm: syz-executor228 Not tainted 6.6.0-gd2f51b35 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x136/0x150 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0xd5/0x130 lib/ubsan.c:348 rds_cmsg_recv+0x60d/0x700 net/rds/recv.c:585 rds_recvmsg+0x3fb/0x1610 net/rds/recv.c:716 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1066 __sys_recvfrom+0x1b6/0x2f0 net/socket.c:2246 __do_sys_recvfrom net/socket.c:2264 [inline] __se_sys_recvfrom net/socket.c:2260 [inline] __x64_sys_recvfrom+0xe0/0x1b0 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b ================================================================== Fixes: 3289025a ("RDS: add receive message trace used by application") Reported-by:
Chenyuan Yang <chenyuan0y@gmail.com> Closes: https://lore.kernel.org/linux-rdma/CALGdzuoVdq-wtQ4Az9iottBqC5cv9ZhcE5q8N7LfYFvkRsOVcw@mail.gmail.com/Signed-off-by:
Sharath Srinivasan <sharath.srinivasan@oracle.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Horatiu Vultur authored
The HW has the capability to check each frame if it is a PTP frame, which domain it is, which ptp frame type it is, different ip address in the frame. And if one of these checks fail then the frame is not timestamp. Most of these checks were disabled except checking the field minorVersionPTP inside the PTP header. Meaning that once a partner sends a frame compliant to 8021AS which has minorVersionPTP set to 1, then the frame was not timestamp because the HW expected by default a value of 0 in minorVersionPTP. This is exactly the same issue as on lan8841. Fix this issue by removing this check so the userspace can decide on this. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
Divya Koppera <divya.koppera@microchip.com> Signed-off-by:
-
David S. Miller authored
Arkadiusz Kubalewski says: ==================== dpll: fix unordered unbind/bind registerer issues Fix issues when performing unordered unbind/bind of a kernel modules which are using a dpll device with DPLL_PIN_TYPE_MUX pins. Currently only serialized bind/unbind of such use case works, fix the issues and allow for unserialized kernel module bind order. The issues are observed on the ice driver, i.e., $ echo 0000:af:00.0 > /sys/bus/pci/drivers/ice/unbind $ echo 0000:af:00.1 > /sys/bus/pci/drivers/ice/unbind results in: ice 0000:af:00.0: Removed PTP clock BUG: kernel NULL pointer dereference, address: 0000000000000010 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 71848 Comm: bash Kdump: loaded Not tainted 6.6.0-rc5_next-queue_19th-Oct-2023-01625-g039e5d15e451 #1 Hardware name: Intel Corporation S2600STB/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 RIP: 0010:ice_dpll_rclk_state_on_pin_get+0x2f/0x90 [ice] Code: 41 57 4d 89 cf 41 56 41 55 4d 89 c5 41 54 55 48 89 f5 53 4c 8b 66 08 48 89 cb 4d 8d b4 24 f0 49 00 00 4c 89 f7 e8 71 ec 1f c5 <0f> b6 5b 10 41 0f b6 84 24 30 4b 00 00 29 c3 41 0f b6 84 24 28 4b RSP: 0018:ffffc902b179fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8882c1398000 RSI: ffff888c7435cc60 RDI: ffff888c7435cb90 RBP: ffff888c7435cc60 R08: ffffc902b179fbb0 R09: 0000000000000000 R10: ffff888ef1fc8050 R11: fffffffffff82700 R12: ffff888c743581a0 R13: ffffc902b179fbb0 R14: ffff888c7435cb90 R15: 0000000000000000 FS: 00007fdc7dae0740(0000) GS:ffff888c105c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000000132c24002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? ice_dpll_rclk_state_on_pin_get+0x2f/0x90 [ice] ? __pfx_ice_dpll_rclk_state_on_pin_get+0x10/0x10 [ice] dpll_msg_add_pin_parents+0x142/0x1d0 dpll_pin_event_send+0x7d/0x150 dpll_pin_on_pin_unregister+0x3f/0x100 ice_dpll_deinit_pins+0xa1/0x230 [ice] ice_dpll_deinit+0x29/0xe0 [ice] ice_remove+0xcd/0x200 [ice] pci_device_remove+0x33/0xa0 device_release_driver_internal+0x193/0x200 unbind_store+0x9d/0xb0 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x2bb/0x3e0 ksys_write+0x5f/0xe0 do_syscall_64+0x59/0x90 ? filp_close+0x1b/0x30 ? do_dup2+0x7d/0xd0 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fdc7d93eb97 Code: 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff2aa91028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fdc7d93eb97 RDX: 000000000000000d RSI: 00005644814ec9b0 RDI: 0000000000000001 RBP: 00005644814ec9b0 R08: 0000000000000000 R09: 00007fdc7d9b14e0 R10: 00007fdc7d9b13e0 R11: 0000000000000246 R12: 000000000000000d R13: 00007fdc7d9fb780 R14: 000000000000000d R15: 00007fdc7d9f69e0 </TASK> Modules linked in: uinput vfio_pci vfio_pci_core vfio_iommu_type1 vfio irqbypass ixgbevf snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore overlay qrtr rfkill vfat fat xfs libcrc32c rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma rapl intel_cstate ib_uverbs iTCO_wdt iTCO_vendor_support acpi_ipmi intel_uncore mei_me ipmi_si pcspkr i2c_i801 ib_core mei ipmi_devintf intel_pch_thermal ioatdma i2c_smbus ipmi_msghandler lpc_ich joydev acpi_power_meter acpi_pad ext4 mbcache jbd2 sd_mod t10_pi sg ast i2c_algo_bit drm_shmem_helper drm_kms_helper ice crct10dif_pclmul ixgbe crc32_pclmul drm crc32c_intel ahci i40e libahci ghash_clmulni_intel libata mdio dca gnss wmi fuse [last unloaded: iavf] CR2: 0000000000000010 v6: - fix memory corruption on error path in patch [v5 2/4] ==================== Acked-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by:
-
Arkadiusz Kubalewski authored
In case of multiple kernel module instances using the same dpll device: if only one registers dpll device, then only that one can register directly connected pins with a dpll device. When unregistered parent is responsible for determining if the muxed pin can be registered with it or not, the drivers need to be loaded in serialized order to work correctly - first the driver instance which registers the direct pins needs to be loaded, then the other instances could register muxed type pins. Allow registration of a pin with a parent even if the parent was not yet registered, thus allow ability for unserialized driver instance load order. Do not WARN_ON notification for unregistered pin, which can be invoked for described case, instead just return error. Fixes: 9431063a ("dpll: core: Add DPLL framework base functions") Fixes: 9d71b54b ("dpll: netlink: Add DPLL framework base functions") Reviewed-by:
Jan Glaza <jan.glaza@intel.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by:
-
Arkadiusz Kubalewski authored
If parent pin was unregistered but child pin was not, the userspace would see the "zombie" pins - the ones that were registered with a parent pin (dpll_pin_on_pin_register(..)). Technically those are not available - as there is no dpll device in the system. Do not dump those pins and prevent userspace from any interaction with them. Provide a unified function to determine if the pin is available and use it before acting/responding for user requests. Fixes: 9d71b54b ("dpll: netlink: Add DPLL framework base functions") Reviewed-by:
-
Arkadiusz Kubalewski authored
When a kernel module is unbound but the pin resources were not entirely freed (other kernel module instance of the same PCI device have had kept the reference to that pin), and kernel module is again bound, the pin properties would not be updated (the properties are only assigned when memory for the pin is allocated), prop pointer still points to the kernel module memory of the kernel module which was deallocated on the unbind. If the pin dump is invoked in this state, the result is a kernel crash. Prevent the crash by storing persistent pin properties in dpll subsystem, copy the content from the kernel module when pin is allocated, instead of using memory of the kernel module. Fixes: 9431063a ("dpll: core: Add DPLL framework base functions") Fixes: 9d71b54b ("dpll: netlink: Add DPLL framework base functions") Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
Arkadiusz Kubalewski authored
If pin type is not expected, or pin properities failed to allocate memory, the unwind error path shall not destroy pin's xarrays, which were not yet initialized. Add new goto label and use it to fix broken error path. Reviewed-by:
-
David S. Miller authored
Yunjian Wang says: ==================== fixes for tun There are few places on the receive path where packet receives and packet drops were not accounted for. This patchset fixes that issue. ==================== Signed-off-by: -
Yunjian Wang authored
The TUN can be used as vhost-net backend, and it is necessary to count the packets transmitted from TUN to vhost-net/virtio-net. However, there are some places in the receive path that were not taken into account when using XDP. It would be beneficial to also include new accounting for successfully received bytes using dev_sw_netstats_rx_add. Fixes: 761876c8 ("tap: XDP support") Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Yunjian Wang authored
The commit 8ae1aff0 ("tuntap: split out XDP logic") includes dropped counter for XDP_DROP, XDP_ABORTED, and invalid XDP actions. Unfortunately, that commit missed the dropped counter when error occurs during XDP_TX and XDP_REDIRECT actions. This patch fixes this issue. Fixes: 8ae1aff0 ("tuntap: split out XDP logic") Signed-off-by:
-
Jakub Kicinski authored
Mark reports a BUG() when a net namespace is removed. kernel BUG at net/core/dev.c:11520! Physical interfaces moved outside of init_net get "refunded" to init_net when that namespace disappears. The main interface name may get overwritten in the process if it would have conflicted. We need to also discard all conflicting altnames. Recent fixes addressed ensuring that altnames get moved with the main interface, which surfaced this problem. Reported-by:Марк Коренберг <socketpair@gmail.com> Link: https://lore.kernel.org/all/CAEmTpZFZ4Sv3KwqFOY2WKDHeZYdi0O7N5H1nTvcGp=SAEavtDg@mail.gmail.com/ Fixes: 7663d522 ("net: check for altname conflicts when changing netdev's netns") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
- 21 Jan, 2024 2 commits
-
-
Michal Schmidt authored
idpf registers multiple netdevs (virtual ports) for one PCI function, but it does not provide a way for userspace to distinguish them with sysfs attributes. Per Documentation/ABI/testing/sysfs-class-net, it is a bug not to set dev_port for independent ports on the same PCI bus, device and function. Without dev_port set, systemd-udevd's default naming policy attempts to assign the same name ("ens2f0") to all four idpf netdevs on my test system and obviously fails, leaving three of them with the initial eth<N> name. With this patch, systemd-udevd is able to assign unique names to the netdevs (e.g. "ens2f0", "ens2f0d1", "ens2f0d2", "ens2f0d3"). The Intel-provided out-of-tree idpf driver already sets dev_port. In this patch I chose to do it in the same place in the idpf_cfg_netdev function. Fixes: 0fe45467 ("idpf: add create vport and netdev configuration") Signed-off-by:Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Eric Dumazet authored
Generic sk_busy_loop_end() only looks at sk->sk_receive_queue for presence of packets. Problem is that for UDP sockets after blamed commit, some packets could be present in another queue: udp_sk(sk)->reader_queue In some cases, a busy poller could spin until timeout expiration, even if some packets are available in udp_sk(sk)->reader_queue. v3: - make sk_busy_loop_end() nicer (Willem) v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats. - add a sk_is_inet() check in sk_is_udp() (Willem feedback) - add a sk_is_inet() check in sk_is_tcp(). Fixes: 2276f58a ("udp: use a separate rx queue for packet reception") Signed-off-by:
-
- 20 Jan, 2024 11 commits
-
-
Kuniyuki Iwashima authored
syzbot reported an uninit-value bug below. [0] llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2 (0x0011), and syzbot abused the latter to trigger the bug. write$tun(r0, &(0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', "90e5dd"}}}}, 0x16) llc_conn_handler() initialises local variables {saddr,daddr}.mac based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes them to __llc_lookup(). However, the initialisation is done only when skb->protocol is htons(ETH_P_802_2), otherwise, __llc_lookup_established() and __llc_lookup_listener() will read garbage. The missing initialisation existed prior to commit 211ed865 ("net: delete all instances of special processing for token ring"). It removed the part to kick out the token ring stuff but forgot to close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv(). Let's remove llc_tr_packet_type and complete the deprecation. [0]: BUG: KMSAN: uninit-value in __llc_lookup_established+0xe9d/0xf90 __llc_lookup_established+0xe9d/0xf90 __llc_lookup net/llc/llc_conn.c:611 [inline] llc_conn_handler+0x4bd/0x1360 net/llc/llc_conn.c:791 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206 __netif_receive_skb_one_core net/core/dev.c:5527 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5641 netif_receive_skb_internal net/core/dev.c:5727 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5786 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x1490 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable daddr created at: llc_conn_handler+0x53/0x1360 net/llc/llc_conn.c:783 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206 CPU: 1 PID: 5004 Comm: syz-executor994 Not tainted 6.6.0-syzkaller-14500-g1c410411 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Fixes: 211ed865 ("net: delete all instances of special processing for token ring") Reported-by: syzbot+b5ad66046b913bc04c6f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b5ad66046b913bc04c6fSigned-off-by: -
Eric Dumazet authored
syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no headroom, but subsequently trying to push 14 bytes of Ethernet header [1] Like some others, llc_ui_sendmsg() releases the socket lock before calling sock_alloc_send_skb(). Then it acquires it again, but does not redo all the sanity checks that were performed. This fix: - Uses LL_RESERVED_SPACE() to reserve space. - Check all conditions again after socket lock is held again. - Do not account Ethernet header for mtu limitation. [1] skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0 kernel BUG at net/core/skbuff.c:193 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:189 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 lr : skb_panic net/core/skbuff.c:189 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 sp : ffff800096f97000 x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000 x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2 x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0 x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001 x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400 x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic net/core/skbuff.c:189 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 skb_push+0xf0/0x108 net/core/skbuff.c:2451 eth_header+0x44/0x1f8 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3188 [inline] llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33 llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209 llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270 llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x194/0x274 net/socket.c:767 splice_to_socket+0x7cc/0xd58 fs/splice.c:881 do_splice_from fs/splice.c:933 [inline] direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142 splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088 do_splice_direct+0x20c/0x348 fs/splice.c:1194 do_sendfile+0x4bc/0xc70 fs/read_write.c:1254 __do_sys_sendfile64 fs/read_write.c:1322 [inline] __se_sys_sendfile64 fs/read_write.c:1308 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595 Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+2a7024e9502df538e8ef@syzkaller.appspotmail.com Signed-off-by:
-
Lin Ma authored
In the vlan_changelink function, a loop is used to parse the nested attributes IFLA_VLAN_EGRESS_QOS and IFLA_VLAN_INGRESS_QOS in order to obtain the struct ifla_vlan_qos_mapping. These two nested attributes are checked in the vlan_validate_qos_map function, which calls nla_validate_nested_deprecated with the vlan_map_policy. However, this deprecated validator applies a LIBERAL strictness, allowing the presence of an attribute with the type IFLA_VLAN_QOS_UNSPEC. Consequently, the loop in vlan_changelink may parse an attribute of type IFLA_VLAN_QOS_UNSPEC and believe it carries a payload of struct ifla_vlan_qos_mapping, which is not necessarily true. To address this issue and ensure compatibility, this patch introduces two type checks that skip attributes whose type is not IFLA_VLAN_QOS_MAPPING. Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Reviewed-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes This series contains 5 miscellaneous fixes. The fixes include adding delay for FLR, buffer memory leak, RSS table size calculation, ethtool self test kernel warning, and mqprio crash. ==================== Link: https://lore.kernel.org/r/20240117234515.226944-1-michael.chan@broadcom.comSigned-off-by:
-
Michael Chan authored
The driver relies on netdev_get_num_tc() to get the number of HW offloaded mqprio TCs to allocate and free TX rings. This won't work and can potentially crash the system if software mqprio or taprio TCs have been setup. netdev_get_num_tc() will return the number of software TCs and it may cause the driver to allocate or free more TX rings that it should. Fix it by adding a bp->num_tc field to store the number of HW offload mqprio TCs for the device. Use bp->num_tc instead of netdev_get_num_tc(). This fixes a crash like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 42b8404067 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 120 PID: 8661 Comm: ifconfig Kdump: loaded Tainted: G OE 5.18.16 #1 Hardware name: Lenovo ThinkSystem SR650 V3/SB27A92818, BIOS ESE114N-2.12 04/25/2023 RIP: 0010:bnxt_hwrm_cp_ring_alloc_p5+0x10/0x90 [bnxt_en] Code: 41 5c 41 5d 41 5e c3 cc cc cc cc 41 8b 44 24 08 66 89 03 eb c6 e8 b0 f1 7d db 0f 1f 44 00 00 41 56 41 55 41 54 55 48 89 fd 53 <48> 8b 06 48 89 f3 48 81 c6 28 01 00 00 0f b6 96 13 ff ff ff 44 8b RSP: 0018:ff65907660d1fa88 EFLAGS: 00010202 RAX: 0000000000000010 RBX: ff4dde1d907e4980 RCX: f400000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: ff4dde1d907e4980 RBP: ff4dde1d907e4980 R08: 000000000000000f R09: 0000000000000000 R10: ff4dde5f02671800 R11: 0000000000000008 R12: 0000000088888889 R13: 0500000000000000 R14: 00f0000000000000 R15: ff4dde5f02671800 FS: 00007f4b126b5740(0000) GS:ff4dde9bff600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000416f9c6002 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> bnxt_hwrm_ring_alloc+0x204/0x770 [bnxt_en] bnxt_init_chip+0x4d/0x680 [bnxt_en] ? bnxt_poll+0x1a0/0x1a0 [bnxt_en] __bnxt_open_nic+0xd2/0x740 [bnxt_en] bnxt_open+0x10b/0x220 [bnxt_en] ? raw_notifier_call_chain+0x41/0x60 __dev_open+0xf3/0x1b0 __dev_change_flags+0x1db/0x250 dev_change_flags+0x21/0x60 devinet_ioctl+0x590/0x720 ? avc_has_extended_perms+0x1b7/0x420 ? _copy_from_user+0x3a/0x60 inet_ioctl+0x189/0x1c0 ? wp_page_copy+0x45a/0x6e0 sock_do_ioctl+0x42/0xf0 ? ioctl_has_perm.constprop.0.isra.0+0xbd/0x120 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x59/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? exc_page_fault+0x62/0x150 Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by:
Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240117234515.226944-6-michael.chan@broadcom.comSigned-off-by:
-
Michael Chan authored
We call bnxt_half_open_nic() to setup the chip partially to run loopback tests. The rings and buffers are initialized normally so that we can transmit and receive packets in loopback mode. That means page pool buffers are allocated for the aggregation ring just like the normal case. NAPI is not needed because we are just polling for the loopback packets. When we're done with the loopback tests, we call bnxt_half_close_nic() to clean up. When freeing the page pools, we hit a WARN_ON() in page_pool_unlink_napi() because the NAPI state linked to the page pool is uninitialized. The simplest way to avoid this warning is just to initialize the NAPIs during half open and delete the NAPIs during half close. Trying to skip the page pool initialization or skip linking of NAPI during half open will be more complicated. This fix avoids this warning: WARNING: CPU: 4 PID: 46967 at net/core/page_pool.c:946 page_pool_unlink_napi+0x1f/0x30 CPU: 4 PID: 46967 Comm: ethtool Tainted: G S W 6.7.0-rc5+ #22 Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021 RIP: 0010:page_pool_unlink_napi+0x1f/0x30 Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 18 48 85 c0 74 1b 48 8b 50 10 83 e2 01 74 08 8b 40 34 83 f8 ff 74 02 <0f> 0b 48 c7 47 18 00 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 RSP: 0018:ffa000003d0dfbe8 EFLAGS: 00010246 RAX: ff110003607ce640 RBX: ff110010baf5d000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: ff110001e5e522c0 RDI: ff110010baf5d000 RBP: ff11000145539b40 R08: 0000000000000001 R09: ffffffffc063f641 R10: ff110001361eddb8 R11: 000000000040000f R12: 0000000000000001 R13: 000000000000001c R14: ff1100014553a080 R15: 0000000000003fc0 FS: 00007f9301c4f740(0000) GS:ff1100103fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f91344fa8f0 CR3: 00000003527cc005 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x81/0x140 ? page_pool_unlink_napi+0x1f/0x30 ? report_bug+0x102/0x200 ? handle_bug+0x44/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_free_ring.isra.123+0xb1/0xd0 [bnxt_en] ? page_pool_unlink_napi+0x1f/0x30 page_pool_destroy+0x3e/0x150 bnxt_free_mem+0x441/0x5e0 [bnxt_en] bnxt_half_close_nic+0x2a/0x40 [bnxt_en] bnxt_self_test+0x21d/0x450 [bnxt_en] __dev_ethtool+0xeda/0x2e30 ? native_queued_spin_lock_slowpath+0x17f/0x2b0 ? __link_object+0xa1/0x160 ? _raw_spin_unlock_irqrestore+0x23/0x40 ? __create_object+0x5f/0x90 ? __kmem_cache_alloc_node+0x317/0x3c0 ? dev_ethtool+0x59/0x170 dev_ethtool+0xa7/0x170 dev_ioctl+0xc3/0x530 sock_do_ioctl+0xa8/0xf0 sock_ioctl+0x270/0x310 __x64_sys_ioctl+0x8c/0xc0 do_syscall_64+0x3e/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Fixes: 294e39e0 ("bnxt: hook NAPIs to page pools") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
-
Michael Chan authored
The existing formula used in the driver to calculate the number of RSS table entries is to round up the number of RX rings to the next integer multiples of 64 (e.g. 64, 128, 192, ..). This is incorrect. The valid values supported by the chip are 64, 128, 256, 512 only (power of 2 starting from 64). When the number of RX rings is greater than 128, the entry size will likely be wrong. Firmware will round down the invalid value (e.g. 192 rounded down to 128) provided by the driver, causing some RSS rings to not receive any packets. We already have an existing function bnxt_calc_nr_ring_pages() to do this calculation. Use it in bnxt_get_nr_rss_ctxs() to calculate the number of RSS contexts correctly for P5_PLUS chips. Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Fixes: 7b3af4f7 ("bnxt_en: Add RSS support for 57500 chips.") Signed-off-by:
-
Michael Chan authored
bnxt_hwrm_get_rings() can abort and return error when there are not enough ring resources. It aborts without releasing the HWRM DMA buffer, causing a dma_pool_destroy warning when the driver is unloaded: bnxt_en 0000:99:00.0: dma_pool_destroy bnxt_hwrm, 000000005b089ba8 busy Fixes: f1e50b27 ("bnxt_en: Fix trimming of P5 RX and TX rings") Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Michael Chan authored
The first message to firmware may fail if the device is undergoing FLR. The driver has some recovery logic for this failure scenario but we must wait 100 msec for FLR to complete before proceeding. Otherwise the recovery will always fail. Fixes: ba02629f ("bnxt_en: log firmware status on firmware init failure") Reviewed-by:
-
Zhengchao Shao authored
When I run syz's reproduction C program locally, it causes the following issue: pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0! WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7 30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900 RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000 R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000 FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_unlock (kernel/locking/spinlock.c:186) inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321) inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358) tcp_check_req (net/ipv4/tcp_minisocks.c:868) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) process_backlog (./include/linux/rcupdate.h:779) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6604) __do_softirq (./arch/x86/include/asm/jump_label.h:27) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4374) ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469) tcp_rcv_state_process (net/ipv4/tcp_input.c:6657) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929) __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968) release_sock (net/core/sock.c:3536) inet_wait_for_connect (net/ipv4/af_inet.c:609) __inet_stream_connect (net/ipv4/af_inet.c:702) inet_stream_connect (net/ipv4/af_inet.c:748) __sys_connect (./include/linux/file.h:45 net/socket.c:2064) __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7fa10ff05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640 R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20 </TASK> The issue triggering process is analyzed as follows: Thread A Thread B tcp_v4_rcv //receive ack TCP packet inet_shutdown tcp_check_req tcp_disconnect //disconnect sock ... tcp_set_state(sk, TCP_CLOSE) inet_csk_complete_hashdance ... inet_csk_reqsk_queue_add inet_listen //start listen spin_lock(&queue->rskq_lock) inet_csk_listen_start ... reqsk_queue_alloc ... spin_lock_init spin_unlock(&queue->rskq_lock) //warning When the socket receives the ACK packet during the three-way handshake, it will hold spinlock. And then the user actively shutdowns the socket and listens to the socket immediately, the spinlock will be initialized. When the socket is going to release the spinlock, a warning is generated. Also the same issue to fastopenq.lock. Move init spinlock to inet_create and inet_accept to make sure init the accept_queue's spinlocks once. Fixes: fff1f300 ("tcp: add a spinlock to protect struct request_sock_queue") Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path") Reported-by:Ming Shu <sming56@aliyun.com> Signed-off-by:
-
Benjamin Poirier authored
When tests are run by runner.sh, bond_options.sh gets killed before it can complete: make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding" [...] # timeout set to 120 # selftests: drivers/net/bonding: bond_options.sh # TEST: prio (active-backup miimon primary_reselect 0) [ OK ] # TEST: prio (active-backup miimon primary_reselect 1) [ OK ] # TEST: prio (active-backup miimon primary_reselect 2) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ] # TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ] # not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds This test includes many sleep statements, at least some of which are related to timers in the operation of the bonding driver itself. Increase the test timeout to allow the test to complete. I ran the test in slightly different VMs (including one without HW virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and 13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s. Fixes: 42a8d4aa ("selftests: bonding: add bonding prio option test") Reported-by:
Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.comSigned-off-by:
-
- 19 Jan, 2024 6 commits
-
-
Wen Gu authored
A crash was found when dumping SMC-D connections. It can be reproduced by following steps: - run nginx/wrk test: smc_run nginx smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL> - continuously dump SMC-D connections in parallel: watch -n 1 'smcss -D' BUG: kernel NULL pointer dereference, address: 0000000000000030 CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E 6.7.0+ #55 RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x66/0x150 ? exc_page_fault+0x69/0x140 ? asm_exc_page_fault+0x26/0x30 ? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] ? __kmalloc_node_track_caller+0x35d/0x430 ? __alloc_skb+0x77/0x170 smc_diag_dump_proto+0xd0/0xf0 [smc_diag] smc_diag_dump+0x26/0x60 [smc_diag] netlink_dump+0x19f/0x320 __netlink_dump_start+0x1dc/0x300 smc_diag_handler_dump+0x6a/0x80 [smc_diag] ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag] sock_diag_rcv_msg+0x121/0x140 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5a/0x110 sock_diag_rcv+0x28/0x40 netlink_unicast+0x22a/0x330 netlink_sendmsg+0x1f8/0x420 __sock_sendmsg+0xb0/0xc0 ____sys_sendmsg+0x24e/0x300 ? copy_msghdr_from_user+0x62/0x80 ___sys_sendmsg+0x7c/0xd0 ? __do_fault+0x34/0x160 ? do_read_fault+0x5f/0x100 ? do_fault+0xb0/0x110 ? __handle_mm_fault+0x2b0/0x6c0 __sys_sendmsg+0x4d/0x80 do_syscall_64+0x69/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 It is possible that the connection is in process of being established when we dump it. Assumed that the connection has been registered in a link group by smc_conn_create() but the rmb_desc has not yet been initialized by smc_buf_create(), thus causing the illegal access to conn->rmb_desc. So fix it by checking before dump. Fixes: 4b1b7d3b ("net/smc: add SMC-D diag support") Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Reviewed-by:
Dust Li <dust.li@linux.alibaba.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Previous releases - regressions: - Revert "net: rtnetlink: Enslave device before bringing it up", breaks the case inverse to the one it was trying to fix - net: dsa: fix oob access in DSA's netdevice event handler dereference netdev_priv() before check its a DSA port - sched: track device in tcf_block_get/put_ext() only for clsact binder types - net: tls, fix WARNING in __sk_msg_free when record becomes full during splice and MORE hint set - sfp-bus: fix SFP mode detect from bitrate - drv: stmmac: prevent DSA tags from breaking COE Previous releases - always broken: - bpf: fix no forward progress in in bpf_iter_udp if output buffer is too small - bpf: reject variable offset alu on registers with a type of PTR_TO_FLOW_KEYS to prevent oob access - netfilter: tighten input validation - net: add more sanity check in virtio_net_hdr_to_skb() - rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid infinite loop - amt: do not use the portion of skb->cb area which may get clobbered - mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option Misc: - spring cleanup of inactive maintainers" * tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) i40e: Include types.h to some headers ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes selftests: mlxsw: qos_pfc: Remove wrong description mlxsw: spectrum_router: Register netdevice notifier before nexthop mlxsw: spectrum_acl_tcam: Fix stack corruption mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure ethtool: netlink: Add missing ethnl_ops_begin/complete selftests: bonding: Add more missing config options selftests: netdevsim: add a config file libbpf: warn on unexpected __arg_ctx type when rewriting BTF selftests/bpf: add tests confirming type logic in kernel for __arg_ctx bpf: enforce types for __arg_ctx-tagged arguments in global subprogs bpf: extract bpf_ctx_convert_map logic and make it more reusable libbpf: feature-detect arg:ctx tag support in kernel ipvs: avoid stat macros calls from preemptible context netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description netfilter: nf_tables: skip dead set elements in netlink dump netfilter: nf_tables: do not allow mismatch field size and set key length ... -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "This removes the currently unused CLASS_DDC support (controllers set the flag, but there is no client to use it). Also, CLASS_SPD support gets simplified to prepare removal in the future. Class based instantiation is not recommended these days anyhow. Furthermore, I2C core now creates a debugfs directory per I2C adapter. Current bus driver users were converted to use it. Finally, quite some driver updates. Standing out are patches for the wmt-driver which is refactored to support more variants. This is the rebased pull request where a large series for the designware driver was dropped" * tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) MAINTAINERS: use proper email for my I2C work i2c: stm32f7: add support for stm32mp25 soc i2c: stm32f7: perform I2C_ISR read once at beginning of event isr dt-bindings: i2c: document st,stm32mp25-i2c compatible i2c: stm32f7: simplify status messages in case of errors i2c: stm32f7: perform most of irq job in threaded handler i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq i2c: i801: Add lis3lv02d for Dell XPS 15 7590 i2c: i801: Add lis3lv02d for Dell Precision 3540 i2c: wmt: Reduce redundant: REG_CR setting i2c: wmt: Reduce redundant: function parameter i2c: wmt: Reduce redundant: clock mode setting i2c: wmt: Reduce redundant: wait event complete i2c: wmt: Reduce redundant: bus busy check i2c: mux: reg: Remove class-based device auto-detection support i2c: make i2c_bus_type const dt-bindings: at24: add ROHM BR24G04 eeprom: at24: use of_match_ptr() i2c: cpm: Remove linux,i2c-index conversion from be32 i2c: imx: Make SDA actually optional for bus recovering ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "There are three new drivers this cycle. Also the cmos driver is getting fixes for longstanding wakeup issues on AMD. New drivers: - Analog Devices MAX31335 - Nuvoton ma35d1 - Texas Instrument TPS6594 PMIC RTC Drivers: - cmos: use ACPI alarm instead of HPET on recent AMD platforms - nuvoton: add NCT3015Y-R and NCT3018Y-R support - rv8803: proper suspend/resume and wakeup-source support" * tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits) rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R rtc: da9063: Use dev_err_probe() rtc: da9063: Use device_get_match_data() rtc: da9063: Make IRQ as optional rtc: max31335: Fix comparison in max31335_volatile_reg() rtc: max31335: use regmap_update_bits_check rtc: max31335: remove unecessary locking rtc: max31335: add driver support dt-bindings: rtc: max31335: add max31335 bindings rtc: rv8803: add wakeup-source support rtc: ac100: remove misuses of kernel-doc rtc: class: Remove usage of the deprecated ida_simple_xx() API rtc: MAINTAINERS: drop Alessandro Zummo rtc: ma35d1: remove hardcoded UIE support dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example rtc: rv8803: Add power management support rtc: ds3232: avoid unused-const-variable warning rtc: lpc24xx: add missing dependency rtc: tps6594: Add driver for TPS6594 RTC rtc: Add driver for Nuvoton ma35d1 rtc controller ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - a new driver for Adafruit Seesaw gamepad device - Zforce touchscreen will handle standard device properties for axis swap/inversion - handling of advanced sensitivity settings in Microchip CAP11xx capacitive sensor driver - more drivers have been converted to use newer gpiod API - support for dedicated wakeup IRQs in gpio-keys dirver - support for slider gestures and OTP variants in iqs269a driver - atkbd will report keyboard version as 0xab83 in cases when GET ID command was skipped (to deal with problematic firmware on newer laptops), restoring the previous behavior - other assorted cleanups and changes * tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: atkbd - use ab83 as id when skipping the getid command Input: driver for Adafruit Seesaw Gamepad dt-bindings: input: bindings for Adafruit Seesaw Gamepad Input: da9063_onkey - avoid explicitly setting input's parent Input: da9063_onkey - avoid using OF-specific APIs Input: iqs269a - add support for OTP variants dt-bindings: input: iqs269a: Add bindings for OTP variants Input: iqs269a - add support for slider gestures dt-bindings: input: iqs269a: Add bindings for slider gestures Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages Input: zforce_ts - accept standard touchscreen properties dt-bindings: touchscreen: neonode,zforce: Use standard properties dt-bindings: touchscreen: convert neonode,zforce to json-schema dt-bindings: input: convert drv266x to json-schema Input: da9063 - use dev_err_probe() Input: da9063 - drop redundant prints in probe() Input: da9063 - simplify obtaining OF match data Input: as5011 - convert to GPIO descriptor Input: omap-keypad - drop optional GPIO support Input: tca6416-keypad - drop unused include ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phyLinus Torvalds authored
Pull phy updates from Vinod Koul: "New Support: - Qualcomm SM8650 UFS, PCIe and USB/DP Combo PHY, eUSB2 PHY, SDX75 USB3, X1E80100 USB3 support - Mediatek MT8195 support - Rockchip RK3128 usb2 support - TI SGMII mode for J784S4 Updates: - Qualcomm v7 register offsets updates - Mediatek tphy support for force phy mode switch" * tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (34 commits) phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4 phy: ti: gmii-sel: Enable SGMII mode for J784S4 phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY support dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible phy: mediatek: tphy: add support force phy mode switch dt-bindings: phy: mediatek: tphy: add a property for force-mode switch phy: phy-can-transceiver: insert space after include phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header phy: renesas: phy-rcar-gen2: use select for GENERIC_PHY phy: qcom-qmp: qserdes-txrx: Add v7 register offsets phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets phy: qcom-qmp: qserdes-com: Add v7 register offsets phy: qcom-qmp: pcs-usb: Add v7 register offsets phy: qcom-qmp: pcs: Add v7 register offsets phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets phy: qcom-qmp: qserdes-com: Add some more v6 register offsets ...
-
