- 30 Aug, 2017 40 commits
-
-
Chen Yu authored
commit 556b969a upstream. There is a problem that when counting the pages for creating the hibernation snapshot will take significant amount of time, especially on system with large memory. Since the counting job is performed with irq disabled, this might lead to NMI lockup. The following warning were found on a system with 1.5TB DRAM: Freezing user space processes ... (elapsed 0.002 seconds) done. OOM killer disabled. PM: Preallocating image memory... NMI watchdog: Watchdog detected hard LOCKUP on cpu 27 CPU: 27 PID: 3128 Comm: systemd-sleep Not tainted 4.13.0-0.rc2.git0.1.fc27.x86_64 #1 task: ffff9f01971ac000 task.stack: ffffb1a3f325c000 RIP: 0010:memory_bm_find_bit+0xf4/0x100 Call Trace: swsusp_set_page_free+0x2b/0x30 mark_free_pages+0x147/0x1c0 count_data_pages+0x41/0xa0 hibernate_preallocate_memory+0x80/0x450 hibernation_snapshot+0x58/0x410 hibernate+0x17c/0x310 state_store+0xdf/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x11c/0x1a0 __vfs_write+0x37/0x170 vfs_write+0xb1/0x1a0 SyS_write+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xa5 ... done (allocated 6590003 pages) PM: Allocated 26360012 kbytes in 19.89 seconds (1325.28 MB/s) It has taken nearly 20 seconds(2.10GHz CPU) thus the NMI lockup was triggered. In case the timeout of the NMI watch dog has been set to 1 second, a safe interval should be 6590003/20 = 320k pages in theory. However there might also be some platforms running at a lower frequency, so feed the watchdog every 100k pages. [yu.c.chen@intel.com: simplification] Link: http://lkml.kernel.org/r/1503460079-29721-1-git-send-email-yu.c.chen@intel.com [yu.c.chen@intel.com: use interval of 128k instead of 100k to avoid modulus] Link: http://lkml.kernel.org/r/1503328098-5120-1-git-send-email-yu.c.chen@intel.comSigned-off-by:
Chen Yu <yu.c.chen@intel.com> Reported-by:
Jan Filipcewicz <jan.filipcewicz@intel.com> Suggested-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Len Brown <lenb@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vineet Gupta authored
commit b5ddb6d5 upstream. PAE40 confiuration in hardware extends some of the address registers for TLB/cache ops to 2 words. So far kernel was NOT setting the higher word if feature was not enabled in software which is wrong. Those need to be set to 0 in such case. Normally this would be done in the cache flush / tlb ops, however since these registers only exist conditionally, this would have to be conditional to a flag being set on boot which is expensive/ugly - specially for the more common case of PAE exists but not in use. Optimize that by zero'ing them once at boot - nobody will write to them afterwards Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
commit 7d79cee2 upstream. It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1 which hold MSB bits of the physical address correspondingly of region start and end otherwise SLC region operation is executed in unpredictable manner Without this patch, SLC flushes on HSDK (IOC disabled) were taking seconds. Reported-by:
Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
commit b37174d9 upstream. c70c4733 "ARCv2: SLC: Make sure busy bit is set properly on SLC flushing" fixes problem for entire SLC operation where the problem was initially caught. But given a nature of the issue it is perfectly possible for busy bit to be read incorrectly even when region operation was started. So extending initial fix for regional operation as well. Signed-off-by:
-
Takashi Sakamoto authored
commit dbd7396b upstream. When failing sound card registration after initializing stream data, this module leaves allocated data in stream data. This commit fixes the bug. Fixes: 9b2bb4f2 ('ALSA: firewire-motu: add stream management functionality') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Sakamoto authored
commit 0c264af7 upstream. When calling 'iso_resource_free()' for uninitialized data, this function causes NULL pointer dereference due to its 'unit' member. This occurs when unplugging audio and music units on IEEE 1394 bus at failure of card registration. This commit fixes the bug. The bug exists since kernel v4.5. Fixes: 324540c4 ('ALSA: fireface: postpone sound card registration') at v4.12 Fixes: 8865a31e ('ALSA: firewire-motu: postpone sound card registration') at v4.12 Fixes: b610386c ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7 Fixes: 86c8dd7f ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7 Fixes: 6c29230e ('ALSA: oxfw: delayed registration of sound card') at v4.7 Fixes: 7d3c1d59 ('ALSA: fireworks: delayed registration of sound card') at v4.7 Fixes: 04a2c73c ('ALSA: bebob: delayed registration of sound card') at v4.7 Fixes: b59fb190 ('ALSA: dice: postpone card registration') at v4.5 Signed-off-by:
-
Takashi Iwai authored
commit bbba6f9d upstream. Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the similar workaround for the inverted stereo dmic like other Lenovo models. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657Signed-off-by:
-
Takashi Iwai authored
commit 88c54cdf upstream. When user tries to replace the user-defined control TLV, the kernel checks the change of its content via memcmp(). The problem is that the kernel passes the return value from memcmp() as is. memcmp() gives a non-zero negative value depending on the comparison result, and this shall be recognized as an error code. The patch covers that corner-case, return 1 properly for the changed TLV. Fixes: 8aa9b586 ("[ALSA] Control API - more robust TLV implementation") Signed-off-by:
-
Joakim Tjernlund authored
commit 07b3b5e9 upstream. These headsets reports a lot of: cannot set freq 44100 to ep 0x81 and need a small delay between sample rate settings, just like Zoom R16/24. Add both headsets to the Zoom R16/24 quirk for a 1 ms delay between control msgs. Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by:
-
Paolo Bonzini authored
commit c469268c upstream. If the host has protection keys disabled, we cannot read and write the guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0. Block the PKU cpuid bit in that case. This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1. Fixes: 1be0e61cReviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 38cfd5e3 upstream. The host pkru is restored right after vcpu exit (commit 1be0e61c), so KVM_GET_XSAVE will return the host PKRU value instead. Fix this by using the guest PKRU explicitly in fill_xsave and load_xsave. This part is based on a patch by Junkang Fu. The host PKRU data may also not match the value in vcpu->arch.guest_fpu.state, because it could have been changed by userspace since the last time it was saved, so skip loading it in kvm_load_guest_fpu. Reported-by:
Junkang Fu <junkang.fjk@alibaba-inc.com> Cc: Yang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61cSigned-off-by:
-
Paolo Bonzini authored
commit b9dd21e1 upstream. Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a simple comparison against the host value of the register. The write of PKRU in addition can be skipped if the guest has not enabled the feature. Once we do this, we need not test OSPKE in the host anymore, because guest_CR4.PKE=1 implies host_CR4.PKE=1. The static PKU test is kept to elide the code on older CPUs. Suggested-by:
Yang Zhang <zy107165@alibaba-inc.com> Fixes: 1be0e61cReviewed-by:
-
Heiko Carstens authored
commit 857b8de9 upstream. sthyi should only generate a specification exception if the function code is zero and the response buffer is not on a 4k boundary. The current code would also test for unknown function codes if the response buffer, that is currently only defined for function code 0, is not on a 4k boundary and incorrectly inject a specification exception instead of returning with condition code 3 and return code 4 (unsupported function code). Fix this by moving the boundary check. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Reviewed-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit 4a4eefcd upstream. The sthyi inline assembly misses register r3 within the clobber list. The sthyi instruction will always write a return code to register "R2+1", which in this case would be r3. Due to that we may have register corruption and see host crashes or data corruption depending on how gcc decided to allocate and use registers during compile time. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Reviewed-by:
-
Masaki Ota authored
commit 4a646580 upstream. Fixed the issue that two finger scroll does not work correctly on V8 protocol. The cause is that V8 protocol X-coordinate decode is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition. Mote notes: the problem manifests itself by the commit e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)"), where a fix for the V8+ protocol was applied. Although the culprit must have been present beforehand, the two-finger scroll worked casually even with the wrongly reported values by some reason. It got broken by the commit above just because it changed x_max value, and this made libinput correctly figuring the MT events. Since the X coord is reported as falsely doubled, the events on the right-half side go outside the boundary, thus they are no longer handled. This resulted as a broken two-finger scroll. One finger event is decoded differently, and it didn't suffer from this problem. The problem was only about MT events. --tiwai Fixes: e7348396 ("Input: ALPS - fix V8+ protocol handling (73 03 28)") Signed-off-by:
Masaki Ota <masaki.ota@jp.alps.com> Tested-by:
Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
KT Liao authored
commit 1d2226e4 upstream. Add ELAN0602 to the list of known ACPI IDs to enable support for ELAN touchpads found in Lenovo Yoga310. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
-
Aaron Ma authored
commit ec667683 upstream. Synaptics add new TP firmware ID: 0x2 and 0x3, for now both lower 2 bits are indicated as TP. Change the constant to bitwise values. This makes trackpoint to be recognized on Lenovo Carbon X1 Gen5 instead of it being identified as "PS/2 Generic Mouse". Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
Edward Cree authored
[ Upstream commit 9305706c ] We have to subtract the src max from the dst min, and vice-versa, since (e.g.) the smallest result comes from the largest subtrahend. Fixes: 48461135 ("bpf: allow access into map value arrays") Signed-off-by:
Edward Cree <ecree@solarflare.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4cabc5b1 ] Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9 ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049 ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 48461135 ("bpf: allow access into map value arrays") Reported-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 43188702 ] Currently the verifier does not track imm across alu operations when the source register is of unknown type. This adds additional pattern matching to catch this and track imm. We've seen LLVM generating this pattern while working on cilium. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 68a66d14 ] This important to call qdisc_tree_reduce_backlog() after changing queue length. Parent qdisc should deactivate class in ->qlen_notify() called from qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero. Missed class deactivations leads to crashes/warnings at picking packets from empty qdisc and corrupting state at reactivating this class in future. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 86a7996c ("net_sched: introduce qdisc_replace() helper") Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 4f8a881a ] As we know in some target's checkentry it may dereference par.entryinfo to check entry stuff inside. But when sched action calls xt_check_target, par.entryinfo is set with NULL. It would cause kernel panic when calling some targets. It can be reproduce with: # tc qd add dev eth1 ingress handle ffff: # tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \ -j ECN --ecn-tcp-remove It could also crash kernel when using target CLUSTERIP or TPROXY. By now there's no proper value for par.entryinfo in ipt_init_target, but it can not be set with NULL. This patch is to void all these panics by setting it with an ipt_entry obj with all members = 0. Note that this issue has been there since the very beginning. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b024d949 ] list.dev has not been initialized and so the copy_to_user is copying data from the stack back to user space which is a potential information leak. Fix this ensuring all of list is initialized to zero. Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit ca3d89a3 ] enable_4k_uar module parameter was added in patch cited below to address the backward compatibility issue in SRIOV when the VM has system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar implementation. The above compatibility issue does not exist in the non SRIOV case. In this patch, we always enable 4k uar implementation if SRIOV is not enabled on mlx4's supported cards. Fixes: 76e39ccf ("net/mlx4_core: Fix backward compatibility on VFs") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit cdbeb633 ] In some situations tcp_send_loss_probe() can realize that it's unable to send a loss probe (TLP), and falls back to calling tcp_rearm_rto() to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto() realizes that the RTO was eligible to fire immediately or at some point in the past (delta_us <= 0). Previously in such cases tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now + icsk_rto, which caused needless delays of hundreds of milliseconds (and non-linear behavior that made reproducible testing difficult). This commit changes the logic to schedule "overdue" RTOs ASAP, rather than at now + icsk_rto. Fixes: 6ba8a3b1 ("tcp: Tail loss probe (TLP)") Suggested-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 348a4002 ] In fib6_add(), it is possible that fib6_add_1() picks an intermediate node and sets the node's fn->leaf to NULL in order to add this new route. However, if fib6_add_rt2node() fails to add the new route for some reason, fn->leaf will be left as NULL and could potentially cause crash when fn->leaf is accessed in fib6_locate(). This patch makes sure fib6_repair_tree() is called to properly repair fn->leaf in the above failure case. Here is the syzkaller reported general protection fault in fib6_locate: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000 RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline] RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233 RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202 RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000 RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100 RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000 FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0 ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0 ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988 Call Trace: [<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109 [<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075 [<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450 [<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281 [<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456 [<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline] [<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232 [<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778 [<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline] [<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619 [<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834 [<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478 [<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491 [<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538 [<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline] [<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577 [<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17 Note: there is no "Fixes" tag as this seems to be a bug introduced very early. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
-
Wei Wang authored
[ Upstream commit 383143f3 ] syzcaller reported the following use-after-free issue in rt6_select(): BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8 BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8 Read of size 4 by task syz-executor1/439628 CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00 ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0 ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380 Call Trace: [<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51 sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option. Use struct sctp_sack_info instead [<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158 [<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline] [<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285 [<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline] [<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325 [<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline] [<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 [<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203 [<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95 [<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223 [<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41 [<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224 [<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943 [<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079 [<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91 [<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline] [<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272 [<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284 [<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564 [<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582 [<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563 [<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17 Object at ffff8800bc699380, in cache ip6_dst_cache size: 384 The root cause of it is that in fib6_add_rt2node(), when it replaces an existing route with the new one, it does not update fn->rr_ptr. This commit resets fn->rr_ptr to NULL when it points to a route which is replaced in fib6_add_rt2node(). Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5bfd37b4 ] syszkaller reported use-after-free in tipc [1] When msg->rep skb is freed, set the pointer to NULL, so that caller does not free it again. [1] ================================================================== BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466 Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115 CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 skb_push+0xd4/0xe0 net/core/skbuff.c:1466 tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9 RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76 R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000 Allocated by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651 __alloc_skb+0xf1/0x740 net/core/skbuff.c:219 alloc_skb include/linux/skbuff.h:903 [inline] tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148 tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 4115: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:682 [inline] kfree_skb+0x165/0x4c0 net/core/skbuff.c:699 tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260 tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline] tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397 genl_rcv+0x28/0x40 net/netlink/genetlink.c:634 netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 sock_write_iter+0x31a/0x5d0 net/socket.c:898 call_write_iter include/linux/fs.h:1743 [inline] new_sync_write fs/read_write.c:457 [inline] __vfs_write+0x684/0x970 fs/read_write.c:470 vfs_write+0x189/0x510 fs/read_write.c:518 SYSC_write fs/read_write.c:565 [inline] SyS_write+0xef/0x220 fs/read_write.c:557 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801c6e71dc0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 208 bytes inside of 224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0) The buggy address belongs to the page: page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 15339e44 ] KMSAN reported use of uninitialized sctp_addr->v4.sin_addr.s_addr and sctp_addr->v6.sin6_scope_id in sctp_v6_cmp_addr() (see below). Make sure all fields of an IPv6 address are initialized, which guarantees that the IPv4 fields are also initialized. ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== BUG: KMSAN: use of uninitialized memory in sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 CPU: 2 PID: 31056 Comm: syz-executor1 Not tainted 4.11.0-rc5+ #2944 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x172/0x1c0 lib/dump_stack.c:42 is_logbuf_locked mm/kmsan/kmsan.c:59 [inline] kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:938 native_save_fl arch/x86/include/asm/irqflags.h:18 [inline] arch_local_save_flags arch/x86/include/asm/irqflags.h:72 [inline] arch_local_irq_save arch/x86/include/asm/irqflags.h:113 [inline] __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:467 sctp_v6_cmp_addr+0x8d4/0x9f0 net/sctp/ipv6.c:517 sctp_v6_get_dst+0x8c7/0x1630 net/sctp/ipv6.c:290 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 sctp_assoc_add_peer+0x66d/0x16f0 net/sctp/associola.c:651 sctp_sendmsg+0x35a5/0x4f90 net/sctp/socket.c:1871 inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg net/socket.c:643 [inline] SYSC_sendto+0x608/0x710 net/socket.c:1696 SyS_sendto+0x8a/0xb0 net/socket.c:1664 entry_SYSCALL_64_fastpath+0x13/0x94 RIP: 0033:0x44b479 RSP: 002b:00007f6213f21c08 EFLAGS: 00000286 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000020000000 RCX: 000000000044b479 RDX: 0000000000000041 RSI: 0000000020edd000 RDI: 0000000000000006 RBP: 00000000007080a8 R08: 0000000020b85fe4 R09: 000000000000001c R10: 0000000000040005 R11: 0000000000000286 R12: 00000000ffffffff R13: 0000000000003760 R14: 00000000006e5820 R15: 0000000000ff8000 origin description: ----dst_saddr@sctp_v6_get_dst local variable created at: sk_fullsock include/net/sock.h:2321 [inline] inet6_sk include/linux/ipv6.h:309 [inline] sctp_v6_get_dst+0x91/0x1630 net/sctp/ipv6.c:241 sctp_transport_route+0x101/0x570 net/sctp/transport.c:292 ================================================================== Signed-off-by:
Alexander Potapenko <glider@google.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit ff244c6b ] syzkaller reported a double free [1], caused by the fact that tun driver was not updated properly when priv_destructor was added. When/if register_netdevice() fails, priv_destructor() must have been called already. [1] BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 CPU: 0 PID: 2919 Comm: syzkaller227220 Not tainted 4.13.0-rc4+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x7f/0x260 mm/kasan/report.c:252 kasan_report_double_free+0x55/0x80 mm/kasan/report.c:333 kasan_slab_free+0xa0/0xc0 mm/kasan/kasan.c:514 __cache_free mm/slab.c:3503 [inline] kfree+0xd3/0x260 mm/slab.c:3820 selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 security_tun_dev_free_security+0x48/0x80 security/security.c:1512 tun_set_iff drivers/net/tun.c:1884 [inline] __tun_chr_ioctl+0x2ce6/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x443ff9 RSP: 002b:00007ffc34271f68 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000443ff9 RDX: 0000000020533000 RSI: 00000000400454ca RDI: 0000000000000003 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401ce0 R13: 0000000000401d70 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 2919: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xaa/0xd0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x101/0x6f0 mm/slab.c:3627 kmalloc include/linux/slab.h:493 [inline] kzalloc include/linux/slab.h:666 [inline] selinux_tun_dev_alloc_security+0x49/0x170 security/selinux/hooks.c:5012 security_tun_dev_alloc_security+0x6d/0xa0 security/security.c:1506 tun_set_iff drivers/net/tun.c:1839 [inline] __tun_chr_ioctl+0x1730/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 2919: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x6e/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kfree+0xd3/0x260 mm/slab.c:3820 selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023 security_tun_dev_free_security+0x48/0x80 security/security.c:1512 tun_free_netdev+0x13b/0x1b0 drivers/net/tun.c:1563 register_netdevice+0x8d0/0xee0 net/core/dev.c:7605 tun_set_iff drivers/net/tun.c:1859 [inline] __tun_chr_ioctl+0x1caf/0x3d50 drivers/net/tun.c:2064 tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe The buggy address belongs to the object at ffff8801d2843b40 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of 32-byte region [ffff8801d2843b40, ffff8801d2843b60) The buggy address belongs to the page: page:ffffea000660cea8 count:1 mapcount:0 mapping:ffff8801d2843000 index:0xffff8801d2843fc1 flags: 0x200000000000100(slab) raw: 0200000000000100 ffff8801d2843000 ffff8801d2843fc1 000000010000003f raw: ffffea0006626a40 ffffea00066141a0 ffff8801dbc00100 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2843a00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ffff8801d2843a80: 00 00 00 fc fc fc fc fc fb fb fb fb fc fc fc fc >ffff8801d2843b00: 00 00 00 00 fc fc fc fc fb fb fb fb fc fc fc fc ^ ffff8801d2843b80: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ffff8801d2843c00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc ================================================================== Fixes: cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit eac2c68d ] The while loop that performs the dma page unmapping never decrements index counter f and hence loops forever. Fix this with a pre-decrement on f. Detected by CoverityScan, CID#1357309 ("Infinite loop") Fixes: 4c352362 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c780a049 ] While working on yet another syzkaller report, I found that our IP_MAX_MTU enforcements were not properly done. gcc seems to reload dev->mtu for min(dev->mtu, IP_MAX_MTU), and final result can be bigger than IP_MAX_MTU :/ This is a problem because device mtu can be changed on other cpus or threads. While this patch does not fix the issue I am working on, it is probably worth addressing it. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 81fbfe8a ] As found by syzkaller, malicious users can set whatever tx_queue_len on a tun device and eventually crash the kernel. Lets remove the ALIGN(XXX, SMP_CACHE_BYTES) thing since a small ring buffer is not fast anyway. Fixes: 2e0ab8ca ("ptr_ring: array based FIFO for pointers") Signed-off-by:
-
Liping Zhang authored
[ Upstream commit 494bea39 ] For sw_flow_actions, the actions_len only represents the kernel part's size, and when we dump the actions to the userspace, we will do the convertions, so it's true size may become bigger than the actions_len. But unfortunately, for OVS_PACKET_ATTR_ACTIONS, we use the actions_len to alloc the skbuff, so the user_skb's size may become insufficient and oops will happen like this: skbuff: skb_over_panic: text:ffffffff8148fabf len:1749 put:157 head: ffff881300f39000 data:ffff881300f39000 tail:0x6d5 end:0x6c0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:129! [...] Call Trace: <IRQ> [<ffffffff8148be82>] skb_put+0x43/0x44 [<ffffffff8148fabf>] skb_zerocopy+0x6c/0x1f4 [<ffffffffa0290d36>] queue_userspace_packet+0x3a3/0x448 [openvswitch] [<ffffffffa0292023>] ovs_dp_upcall+0x30/0x5c [openvswitch] [<ffffffffa028d435>] output_userspace+0x132/0x158 [openvswitch] [<ffffffffa01e6890>] ? ip6_rcv_finish+0x74/0x77 [ipv6] [<ffffffffa028e277>] do_execute_actions+0xcc1/0xdc8 [openvswitch] [<ffffffffa028e3f2>] ovs_execute_actions+0x74/0x106 [openvswitch] [<ffffffffa0292130>] ovs_dp_process_packet+0xe1/0xfd [openvswitch] [<ffffffffa0292b77>] ? key_extract+0x63c/0x8d5 [openvswitch] [<ffffffffa029848b>] ovs_vport_receive+0xa1/0xc3 [openvswitch] [...] Also we can find that the actions_len is much little than the orig_len: crash> struct sw_flow_actions 0xffff8812f539d000 struct sw_flow_actions { rcu = { next = 0xffff8812f5398800, func = 0xffffe3b00035db32 }, orig_len = 1384, actions_len = 592, actions = 0xffff8812f539d01c } So as a quick fix, use the orig_len instead of the actions_len to alloc the user_skb. Last, this oops happened on our system running a relative old kernel, but the same risk still exists on the mainline, since we use the wrong actions_len from the beginning. Fixes: ccea7445 ("openvswitch: include datapath actions with sampled-packet upcall to userspace") Cc: Neil McKee <neil.mckee@inmon.com> Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
David Ahern authored
[ Upstream commit c7b725be ] Anuradha reported that statically added groups for interfaces enslaved to a VRF device were not persisting. The problem is that igmp queries and reports need to use the data in the in_dev for the real ingress device rather than the VRF device. Update igmp_rcv accordingly. Fixes: e58e4159 ("net: Enable support for VRF with ipv4 multicast") Reported-by:
Anuradha Karuppiah <anuradhak@cumulusnetworks.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 88a5c690 ] James reported that on MIPS32 bpf_trace_printk() is currently broken while MIPS64 works fine: bpf_trace_printk() uses conditional operators to attempt to pass different types to __trace_printk() depending on the format operators. This doesn't work as intended on 32-bit architectures where u32 and long are passed differently to u64, since the result of C conditional operators follows the "usual arithmetic conversions" rules, such that the values passed to __trace_printk() will always be u64 [causing issues later in the va_list handling for vscnprintf()]. For example the samples/bpf/tracex5 test printed lines like below on MIPS32, where the fd and buf have come from the u64 fd argument, and the size from the buf argument: [...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688) Instead of this: [...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512) One way to get it working is to expand various combinations of argument types into 8 different combinations for 32 bit and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64 as well that it resolves the issue. Fixes: 9c959c86 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by:
James Hogan <james.hogan@imgtec.com> Tested-by:
-
Konstantin Khlebnikov authored
[ Upstream commit c90e9514 ] It was added in commit e57a784d ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()") to hide duplicates from "tc qdisc show" for incative deivices. After 59cc1f61 ("net: sched: convert qdisc linked list to hashtable") it triggered when classful qdisc is added to inactive device because default qdiscs are added before switching root qdisc. Anyway after commit ea327469 ("net: sched: avoid duplicates in qdisc dump") duplicates are filtered right in dumper. Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 325d5dc3 ] When sfq_enqueue() drops head packet or packet from another queue it have to update backlog at upper qdiscs too. Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 187e5b3a ] If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daf ("ipv4: add reference counting to metrics") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 120e9dab ] syszkaller team reported another problem in DCCP [1] Problem here is that the structure holding RTO timer (ccid2_hc_tx_rto_expire() handler) is freed too soon. We can not use del_timer_sync() to cancel the timer since this timer wants to grab socket lock (that would risk a dead lock) Solution is to defer the freeing of memory when all references to the socket were released. Socket timers do own a reference, so this should fix the issue. [1] ================================================================== BUG: KASAN: use-after-free in ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 Read of size 4 at addr ffff8801d2660540 by task kworker/u4:7/3365 CPU: 1 PID: 3365 Comm: kworker/u4:7 Not tainted 4.13.0-rc4+ #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events_unbound call_usermodehelper_exec_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x24e/0x340 mm/kasan/report.c:409 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429 ccid2_hc_tx_rto_expire+0x51c/0x5c0 net/dccp/ccids/ccid2.c:144 call_timer_fn+0x233/0x830 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x7fd/0xb90 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:638 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:1044 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:702 RIP: 0010:arch_local_irq_enable arch/x86/include/asm/paravirt.h:824 [inline] RIP: 0010:__raw_write_unlock_irq include/linux/rwlock_api_smp.h:267 [inline] RIP: 0010:_raw_write_unlock_irq+0x56/0x70 kernel/locking/spinlock.c:343 RSP: 0018:ffff8801cd50eaa8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffffffff85a090c0 RCX: 0000000000000006 RDX: 1ffffffff0b595f3 RSI: 1ffff1003962f989 RDI: ffffffff85acaf98 RBP: ffff8801cd50eab0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801cc96ea60 R13: dffffc0000000000 R14: ffff8801cc96e4c0 R15: ffff8801cc96e4c0 </IRQ> release_task+0xe9e/0x1a40 kernel/exit.c:220 wait_task_zombie kernel/exit.c:1162 [inline] wait_consider_task+0x29b8/0x33c0 kernel/exit.c:1389 do_wait_thread kernel/exit.c:1452 [inline] do_wait+0x441/0xa90 kernel/exit.c:1523 kernel_wait4+0x1f5/0x370 kernel/exit.c:1665 SYSC_wait4+0x134/0x140 kernel/exit.c:1677 SyS_wait4+0x2c/0x40 kernel/exit.c:1673 call_usermodehelper_exec_sync kernel/kmod.c:286 [inline] call_usermodehelper_exec_work+0x1a0/0x2c0 kernel/kmod.c:323 process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2097 worker_thread+0x223/0x1860 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:425 Allocated by task 21267: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x127/0x750 mm/slab.c:3561 ccid_new+0x20e/0x390 net/dccp/ccid.c:151 dccp_hdlr_ccid+0x27/0x140 net/dccp/feat.c:44 __dccp_feat_activate+0x142/0x2a0 net/dccp/feat.c:344 dccp_feat_activate_values+0x34e/0xa90 net/dccp/feat.c:1538 dccp_rcv_request_sent_state_process net/dccp/input.c:472 [inline] dccp_rcv_state_process+0xed1/0x1620 net/dccp/input.c:677 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __release_sock+0x124/0x360 net/core/sock.c:2269 release_sock+0xa4/0x2a0 net/core/sock.c:2784 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1642 SyS_connect+0x24/0x30 net/socket.c:1623 entry_SYSCALL_64_fastpath+0x1f/0xbe Freed by task 3049: save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524 __cache_free mm/slab.c:3503 [inline] kmem_cache_free+0x77/0x280 mm/slab.c:3763 ccid_hc_tx_delete+0xc5/0x100 net/dccp/ccid.c:190 dccp_destroy_sock+0x1d1/0x2b0 net/dccp/proto.c:225 inet_csk_destroy_sock+0x166/0x3f0 net/ipv4/inet_connection_sock.c:833 dccp_done+0xb7/0xd0 net/dccp/proto.c:145 dccp_time_wait+0x13d/0x300 net/dccp/minisocks.c:72 dccp_rcv_reset+0x1d1/0x5b0 net/dccp/input.c:160 dccp_rcv_state_process+0x8fc/0x1620 net/dccp/input.c:663 dccp_v4_do_rcv+0xeb/0x160 net/dccp/ipv4.c:679 sk_backlog_rcv include/net/sock.h:911 [inline] __sk_receive_skb+0x33e/0xc00 net/core/sock.c:521 dccp_v4_rcv+0xef1/0x1c00 net/dccp/ipv4.c:871 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x19af/0x33d0 net/core/dev.c:4417 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4455 process_backlog+0x203/0x740 net/core/dev.c:5130 napi_poll net/core/dev.c:5527 [inline] net_rx_action+0x792/0x1910 net/core/dev.c:5593 __do_softirq+0x2f5/0xba3 kernel/softirq.c:284 The buggy address belongs to the object at ffff8801d2660100 which belongs to the cache ccid2_hc_tx_sock of size 1240 The buggy address is located 1088 bytes inside of 1240-byte region [ffff8801d2660100, ffff8801d26605d8) The buggy address belongs to the page: page:ffffea0007499800 count:1 mapcount:0 mapping:ffff8801d2660100 index:0x0 compound_mapcount: 0 flags: 0x200000000008100(slab|head) raw: 0200000000008100 ffff8801d2660100 0000000000000000 0000000100000005 raw: ffffea00075271a0 ffffea0007538820 ffff8801d3aef9c0 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d2660400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d2660480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d2660500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801d2660580: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff8801d2660600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
-
