- 29 Oct, 2021 13 commits
-
-
Will Deacon authored
* for-next/vdso: arm64: vdso32: require CROSS_COMPILE_COMPAT for gcc+bfd arm64: vdso32: suppress error message for 'make mrproper' arm64: vdso32: drop test for -march=armv8-a arm64: vdso32: drop the test for dmb ishld
-
Will Deacon authored
* for-next/trbe-errata: arm64: errata: Add detection for TRBE write to out-of-range arm64: errata: Add workaround for TSB flush failures arm64: errata: Add detection for TRBE overwrite in FILL mode arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
-
Will Deacon authored
* for-next/sve: arm64/sve: Fix warnings when SVE is disabled arm64/sve: Add stub for sve_max_virtualisable_vl() arm64/sve: Track vector lengths for tasks in an array arm64/sve: Explicitly load vector length when restoring SVE state arm64/sve: Put system wide vector length information into structs arm64/sve: Use accessor functions for vector lengths in thread_struct arm64/sve: Rename find_supported_vector_length() arm64/sve: Make access to FFR optional arm64/sve: Make sve_state_size() static arm64/sve: Remove sve_load_from_fpsimd_state() arm64/fp: Reindent fpsimd_save()
-
Will Deacon authored
* for-next/scs: scs: Release kasan vmalloc poison in scs_free process
-
Will Deacon authored
* for-next/pfn-valid: arm64/mm: drop HAVE_ARCH_PFN_VALID dma-mapping: remove bogus test for pfn_valid from dma_map_resource
-
Will Deacon authored
* for-next/perf: drivers/perf: Improve build test coverage drivers/perf: thunderx2_pmu: Change data in size tx2_uncore_event_update() drivers/perf: hisi: Fix PA PMU counter offset
-
Will Deacon authored
* for-next/mte: kasan: Extend KASAN mode kernel parameter arm64: mte: Add asymmetric mode support arm64: mte: CPU feature detection for Asymm MTE arm64: mte: Bitfield definitions for Asymm MTE kasan: Remove duplicate of kasan_flag_async arm64: kasan: mte: move GCR_EL1 switch to task switch when KASAN disabled
-
Will Deacon authored
* for-next/mm: arm64: mm: update max_pfn after memory hotplug arm64/mm: Add pud_sect_supported() arm64: mm: Drop pointless call to set_max_mapnr()
-
Will Deacon authored
* for-next/misc: arm64: Select POSIX_CPU_TIMERS_TASK_WORK arm64: Document boot requirements for FEAT_SME_FA64 arm64: ftrace: use function_nocfi for _mcount as well arm64: asm: setup.h: export common variables arm64/traps: Avoid unnecessary kernel/user pointer conversion
-
Will Deacon authored
* for-next/kselftest: selftests: arm64: Factor out utility functions for assembly FP tests selftests: arm64: Add coverage of ptrace flags for SVE VL inheritance selftests: arm64: Verify that all possible vector lengths are handled selftests: arm64: Fix and enable test for setting current VL in vec-syscfg selftests: arm64: Remove bogus error check on writing to files selftests: arm64: Fix printf() format mismatch in vec-syscfg selftests: arm64: Move FPSIMD in SVE ptrace test into a function selftests: arm64: More comprehensively test the SVE ptrace interface selftests: arm64: Verify interoperation of SVE and FPSIMD register sets selftests: arm64: Clarify output when verifying SVE register set selftests: arm64: Document what the SVE ptrace test is doing selftests: arm64: Remove extraneous register setting code selftests: arm64: Don't log child creation as a test in SVE ptrace test selftests: arm64: Use a define for the number of SVE ptrace tests to be run
-
Will Deacon authored
* for-next/kexec: arm64: trans_pgd: remove trans_pgd_map_page() arm64: kexec: remove cpu-reset.h arm64: kexec: remove the pre-kexec PoC maintenance arm64: kexec: keep MMU enabled during kexec relocation arm64: kexec: install a copy of the linear-map arm64: kexec: use ld script for relocation function arm64: kexec: relocate in EL1 mode arm64: kexec: configure EL2 vectors for kexec arm64: kexec: pass kimage as the only argument to relocation function arm64: kexec: Use dcache ops macros instead of open-coding arm64: kexec: skip relocation code for inplace kexec arm64: kexec: flush image and lists during kexec load time arm64: hibernate: abstract ttrb0 setup function arm64: trans_pgd: hibernate: Add trans_pgd_copy_el2_vectors arm64: kernel: add helper for booted at EL2 and not VHE
-
Will Deacon authored
* for-next/extable: arm64: vmlinux.lds.S: remove `.fixup` section arm64: extable: add load_unaligned_zeropad() handler arm64: extable: add a dedicated uaccess handler arm64: extable: add `type` and `data` fields arm64: extable: use `ex` for `exception_table_entry` arm64: extable: make fixup_exception() return bool arm64: extable: consolidate definitions arm64: gpr-num: support W registers arm64: factor out GPR numbering helpers arm64: kvm: use kvm_exception_table_entry arm64: lib: __arch_copy_to_user(): fold fixups into body arm64: lib: __arch_copy_from_user(): fold fixups into body arm64: lib: __arch_clear_user(): fold fixups into body
-
Will Deacon authored
* for-next/8.6-timers: arm64: Add HWCAP for self-synchronising virtual counter arm64: Add handling of CNTVCTSS traps arm64: Add CNT{P,V}CTSS_EL0 alternatives to cnt{p,v}ct_el0 arm64: Add a capability for FEAT_ECV clocksource/drivers/arch_arm_timer: Move workaround synchronisation around clocksource/drivers/arm_arch_timer: Fix masking for high freq counters clocksource/drivers/arm_arch_timer: Drop unnecessary ISB on CVAL programming clocksource/drivers/arm_arch_timer: Remove any trace of the TVAL programming interface clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations clocksource/drivers/arm_arch_timer: Advertise 56bit timer to the core code clocksource/drivers/arm_arch_timer: Move MMIO timer programming over to CVAL clocksource/drivers/arm_arch_timer: Fix MMIO base address vs callback ordering issue clocksource/drivers/arm_arch_timer: Move drop _tval from erratum function names clocksource/drivers/arm_arch_timer: Move system register timer programming over to CVAL clocksource/drivers/arm_arch_timer: Extend write side of timer register accessors to u64 clocksource/drivers/arm_arch_timer: Drop CNT*_TVAL read accessors clocksource/arm_arch_timer: Add build-time guards for unhandled register accesses
-
- 28 Oct, 2021 2 commits
-
-
Nicolas Saenz Julienne authored
With 6caa5812 ("KVM: arm64: Use generic KVM xfer to guest work function") all arm64 exit paths are properly equipped to handle the POSIX timers' task work. Deferring timer callbacks to thread context, not only limits the amount of time spent in hard interrupt context, but is a safer implementation[1], and will allow PREEMPT_RT setups to use KVM[2]. So let's enable POSIX_CPU_TIMERS_TASK_WORK on arm64. [1] https://lore.kernel.org/all/20200716201923.228696399@linutronix.de/ [2] https://lore.kernel.org/linux-rt-users/87v92bdnlx.ffs@tglx/Signed-off-by:
Nicolas Saenz Julienne <nsaenzju@redhat.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211018144713.873464-1-nsaenzju@redhat.comSigned-off-by:
Will Deacon <will@kernel.org>
-
Mark Brown authored
The EAC1 release of the SME specification adds the FA64 feature which requires enablement at higher ELs before lower ELs can use it. Document what we require from higher ELs in our boot requirements. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211026111802.12853-1-broonie@kernel.orgSigned-off-by:
-
- 26 Oct, 2021 2 commits
-
-
Mark Brown authored
In configurations where SVE is disabled we define but never reference the functions for retrieving the default vector length, causing warnings. Fix this by move the ifdef up, marking get_default_vl() inline since it is referenced from code guarded by an IS_ENABLED() check, and do the same for the other accessors for consistency. Reported-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Mark Brown authored
Fixes build problems for configurations with KVM enabled but SVE disabled. Reported-by:
-
- 21 Oct, 2021 23 commits
-
-
Suzuki K Poulose authored
Arm Neoverse-N2 and Cortex-A710 cores are affected by an erratum where the trbe, under some circumstances, might write upto 64bytes to an address after the Limit as programmed by the TRBLIMITR_EL1.LIMIT. This might - - Corrupt a page in the ring buffer, which may corrupt trace from a previous session, consumed by userspace. - Hit the guard page at the end of the vmalloc area and raise a fault. To keep the handling simpler, we always leave the last page from the range, which TRBE is allowed to write. This can be achieved by ensuring that we always have more than a PAGE worth space in the range, while calculating the LIMIT for TRBE. And then the LIMIT pointer can be adjusted to leave the PAGE (TRBLIMITR.LIMIT -= PAGE_SIZE), out of the TRBE range while enabling it. This makes sure that the TRBE will only write to an area within its allowed limit (i.e, [head-head+size]) and we do not have to handle address faults within the driver. Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by:Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20211019163153.3692640-5-suzuki.poulose@arm.comSigned-off-by:
-
Suzuki K Poulose authored
Arm Neoverse-N2 (#2067961) and Cortex-A710 (#2054223) suffers from errata, where a TSB (trace synchronization barrier) fails to flush the trace data completely, when executed from a trace prohibited region. In Linux we always execute it after we have moved the PE to trace prohibited region. So, we can apply the workaround every time a TSB is executed. The work around is to issue two TSB consecutively. NOTE: This errata is defined as LOCAL_CPU_ERRATUM, implying that a late CPU could be blocked from booting if it is the first CPU that requires the workaround. This is because we do not allow setting a cpu_hwcaps after the SMP boot. The other alternative is to use "this_cpu_has_cap()" instead of the faster system wide check, which may be a bit of an overhead, given we may have to do this in nvhe KVM host before a guest entry. Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by:
-
Suzuki K Poulose authored
Arm Neoverse-N2 and the Cortex-A710 cores are affected by a CPU erratum where the TRBE will overwrite the trace buffer in FILL mode. The TRBE doesn't stop (as expected in FILL mode) when it reaches the limit and wraps to the base to continue writing upto 3 cache lines. This will overwrite any trace that was written previously. Add the Neoverse-N2 erratum(#2139208) and Cortex-A710 erratum (#2119858) to the detection logic. This will be used by the TRBE driver in later patches to work around the issue. The detection has been kept with the core arm64 errata framework list to make sure : - We don't duplicate the framework in TRBE driver - The errata detection is advertised like the rest of the CPU errata. Note that the Kconfig entries are not fully active until the TRBE driver implements the work around. Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> cc: Leo Yan <leo.yan@linaro.org> Acked-by: -
Suzuki K Poulose authored
Add the CPU Partnumbers for the new Arm designs. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Acked-by:
-
Mark Brown authored
The various floating point test programs written in assembly have a bunch of helper functions and macros which are cut'n'pasted between them. Factor them out into a separate source file which is linked into all of them. We don't include memcmp() since it isn't as generic as it should be and directly branches to report an error in the programs. Signed-off-by:
-
Mark Rutland authored
We no longer place anything into a `.fixup` section, so we no longer need to place those sections into the `.text` section in the main kernel Image. Remove the use of `.fixup`. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20211019160219.5202-14-mark.rutland@arm.comSigned-off-by:
-
Mark Rutland authored
For inline assembly, we place exception fixups out-of-line in the `.fixup` section such that these are out of the way of the fast path. This has a few drawbacks: * Since the fixup code is anonymous, backtraces will symbolize fixups as offsets from the nearest prior symbol, currently `__entry_tramp_text_end`. This is confusing, and painful to debug without access to the relevant vmlinux. * Since the exception handler adjusts the PC to execute the fixup, and the fixup uses a direct branch back into the function it fixes, backtraces of fixups miss the original function. This is confusing, and violates requirements for RELIABLE_STACKTRACE (and therefore LIVEPATCH). * Inline assembly and associated fixups are generated from templates, and we have many copies of logically identical fixups which only differ in which specific registers are written to and which address is branched to at the end of the fixup. This is potentially wasteful of I-cache resources, and makes it hard to add additional logic to fixups without significant bloat. * In the case of load_unaligned_zeropad(), the logic in the fixup requires a temporary register that we must allocate even in the fast-path where it will not be used. This patch address all four concerns for load_unaligned_zeropad() fixups by adding a dedicated exception handler which performs the fixup logic in exception context and subsequent returns back after the faulting instruction. For the moment, the fixup logic is identical to the old assembly fixup logic, but in future we could enhance this by taking the ESR and FAR into account to constrain the faults we try to fix up, or to specialize fixups for MTE tag check faults. Other than backtracing, there should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
For inline assembly, we place exception fixups out-of-line in the `.fixup` section such that these are out of the way of the fast path. This has a few drawbacks: * Since the fixup code is anonymous, backtraces will symbolize fixups as offsets from the nearest prior symbol, currently `__entry_tramp_text_end`. This is confusing, and painful to debug without access to the relevant vmlinux. * Since the exception handler adjusts the PC to execute the fixup, and the fixup uses a direct branch back into the function it fixes, backtraces of fixups miss the original function. This is confusing, and violates requirements for RELIABLE_STACKTRACE (and therefore LIVEPATCH). * Inline assembly and associated fixups are generated from templates, and we have many copies of logically identical fixups which only differ in which specific registers are written to and which address is branched to at the end of the fixup. This is potentially wasteful of I-cache resources, and makes it hard to add additional logic to fixups without significant bloat. This patch address all three concerns for inline uaccess fixups by adding a dedicated exception handler which updates registers in exception context and subsequent returns back into the function which faulted, removing the need for fixups specialized to each faulting instruction. Other than backtracing, there should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
Subsequent patches will add specialized handlers for fixups, in addition to the simple PC fixup and BPF handlers we have today. In preparation, this patch adds a new `type` field to struct exception_table_entry, and uses this to distinguish the fixup and BPF cases. A `data` field is also added so that subsequent patches can associate data specific to each exception site (e.g. register numbers). Handlers are named ex_handler_*() for consistency, following the exmaple of x86. At the same time, get_ex_fixup() is split out into a helper so that it can be used by other ex_handler_*() functions ins subsequent patches. This patch will increase the size of the exception tables, which will be remedied by subsequent patches removing redundant fixup code. There should be no functional change as a result of this patch. Since each entry is now 12 bytes in size, we must reduce the alignment of each entry from `.align 3` (i.e. 8 bytes) to `.align 2` (i.e. 4 bytes), which is the natrual alignment of the `insn` and `fixup` fields. The current 8-byte alignment is a holdover from when the `insn` and `fixup` fields was 8 bytes, and while not harmful has not been necessary since commit: 6c94f27a ("arm64: switch to relative exception tables") Similarly, RO_EXCEPTION_TABLE_ALIGN is dropped to 4 bytes. Concurrently with this patch, x86's exception table entry format is being updated (similarly to a 12-byte format, with 32-bytes of absolute data). Once both have been merged it should be possible to unify the sorttable logic for the two. Signed-off-by:
-
Mark Rutland authored
Subsequent patches will extend `struct exception_table_entry` with more fields, and the distinction between the entry and its `fixup` field will become more important. For clarity, let's consistently use `ex` to refer to refer to an entire entry. In subsequent patches we'll use `fixup` to refer to the fixup field specifically. This matches the naming convention used today in arch/arm64/net/bpf_jit_comp.c. There should be no functional change as a result of this patch. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
-
Mark Rutland authored
The return values of fixup_exception() and arm64_bpf_fixup_exception() represent a boolean condition rather than an error code, so for clarity it would be better to return `bool` rather than `int`. This patch adjusts the code accordingly. While we're modifying the prototype, we also remove the unnecessary `extern` keyword, so that this won't look out of place when we make subsequent additions to the header. There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
In subsequent patches we'll alter the structure and usage of struct exception_table_entry. For inline assembly, we create these using the `_ASM_EXTABLE()` CPP macro defined in <asm/uaccess.h>, and for plain assembly code we use the `_asm_extable()` GAS macro defined in <asm/assembler.h>, which are largely identical save for different escaping and stringification requirements. This patch moves the common definitions to a new <asm/asm-extable.h> header, so that it's easier to keep the two in-sync, and to remove the implication that these are only used for uaccess helpers (as e.g. load_unaligned_zeropad() is only used on kernel memory, and depends upon `_ASM_EXTABLE()`. At the same time, a few minor modifications are made for clarity and in preparation for subsequent patches: * The structure creation is factored out into an `__ASM_EXTABLE_RAW()` macro. This will make it easier to support different fixup variants in subsequent patches without needing to update all users of `_ASM_EXTABLE()`, and makes it easier to see tha the CPP and GAS variants of the macros are structurally identical. For the CPP macro, the stringification of fields is left to the wrapper macro, `_ASM_EXTABLE()`, as in subsequent patches it will be necessary to stringify fields in wrapper macros to safely concatenate strings which cannot be token-pasted together in CPP. * The fields of the structure are created separately on their own lines. This will make it easier to add/remove/modify individual fields clearly. * Additional parentheses are added around the use of macro arguments in field definitions to avoid any potential problems with evaluation due to operator precedence, and to make errors upon misuse clearer. * USER() is moved into <asm/asm-uaccess.h>, as it is not required by all assembly code, and is already refered to by comments in that file. There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
In subsequent patches we'll want to map W registers to their register numbers. Update gpr-num.h so that we can do this. Signed-off-by:
-
Mark Rutland authored
In <asm/sysreg.h> we have macros to convert the names of general purpose registers (GPRs) into integer constants, which we use to manually build the encoding for `MRS` and `MSR` instructions where we can't rely on the assembler to do so for us. In subsequent patches we'll need to map the same GPR names to integer constants so that we can use this to build metadata for exception fixups. So that the we can use the mappings elsewhere, factor out the definitions into a new <asm/gpr-num.h> header, renaming the definitions to align with this "GPR num" naming for clarity. There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
In subsequent patches we'll alter `struct exception_table_entry`, adding fields that are not needed for KVM exception fixups. In preparation for this, migrate KVM to its own `struct kvm_exception_table_entry`, which is identical to the current format of `struct exception_table_entry`. Comments are updated accordingly. There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
Like other functions, __arch_copy_to_user() places its exception fixups in the `.fixup` section without any clear association with __arch_copy_to_user() itself. If we backtrace the fixup code, it will be symbolized as an offset from the nearest prior symbol, which happens to be `__entry_tramp_text_end`. Further, since the PC adjustment for the fixup is akin to a direct branch rather than a function call, __arch_copy_to_user() itself will be missing from the backtrace. This is confusing and hinders debugging. In general this pattern will also be problematic for CONFIG_LIVEPATCH, since fixups often return to their associated function, but this isn't accurately captured in the stacktrace. To solve these issues for assembly functions, we must move fixups into the body of the functions themselves, after the usual fast-path returns. This patch does so for __arch_copy_to_user(). Inline assembly will be dealt with in subsequent patches. Other than the improved backtracing, there should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
Like other functions, __arch_copy_from_user() places its exception fixups in the `.fixup` section without any clear association with __arch_copy_from_user() itself. If we backtrace the fixup code, it will be symbolized as an offset from the nearest prior symbol, which happens to be `__entry_tramp_text_end`. Further, since the PC adjustment for the fixup is akin to a direct branch rather than a function call, __arch_copy_from_user() itself will be missing from the backtrace. This is confusing and hinders debugging. In general this pattern will also be problematic for CONFIG_LIVEPATCH, since fixups often return to their associated function, but this isn't accurately captured in the stacktrace. To solve these issues for assembly functions, we must move fixups into the body of the functions themselves, after the usual fast-path returns. This patch does so for __arch_copy_from_user(). Inline assembly will be dealt with in subsequent patches. Other than the improved backtracing, there should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
Like other functions, __arch_clear_user() places its exception fixups in the `.fixup` section without any clear association with __arch_clear_user() itself. If we backtrace the fixup code, it will be symbolized as an offset from the nearest prior symbol, which happens to be `__entry_tramp_text_end`. Further, since the PC adjustment for the fixup is akin to a direct branch rather than a function call, __arch_clear_user() itself will be missing from the backtrace. This is confusing and hinders debugging. In general this pattern will also be problematic for CONFIG_LIVEPATCH, since fixups often return to their associated function, but this isn't accurately captured in the stacktrace. To solve these issues for assembly functions, we must move fixups into the body of the functions themselves, after the usual fast-path returns. This patch does so for __arch_clear_user(). Inline assembly will be dealt with in subsequent patches. Other than the improved backtracing, there should be no functional change as a result of this patch. Signed-off-by:
-
Nick Desaulniers authored
Similar to commit 231ad7f4 ("Makefile: infer --target from ARCH for CC=clang") There really is no point in setting --target based on $CROSS_COMPILE_COMPAT for clang when the integrated assembler is being used, since commit ef943405 ("arm64: vdso32: drop -no-integrated-as flag"). Allows COMPAT_VDSO to be selected without setting $CROSS_COMPILE_COMPAT when using clang and lld together. Before: $ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig $ grep CONFIG_COMPAT_VDSO .config CONFIG_COMPAT_VDSO=y $ ARCH=arm64 make -j72 LLVM=1 defconfig $ grep CONFIG_COMPAT_VDSO .config $ After: $ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 defconfig $ grep CONFIG_COMPAT_VDSO .config CONFIG_COMPAT_VDSO=y $ ARCH=arm64 make -j72 LLVM=1 defconfig $ grep CONFIG_COMPAT_VDSO .config CONFIG_COMPAT_VDSO=y Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20211019223646.1146945-5-ndesaulniers@google.comSigned-off-by:
-
Nick Desaulniers authored
When running the following command without arm-linux-gnueabi-gcc in one's $PATH, the following warning is observed: $ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 mrproper make[1]: arm-linux-gnueabi-gcc: No such file or directory This is because KCONFIG is not run for mrproper, so CONFIG_CC_IS_CLANG is not set, and we end up eagerly evaluating various variables that try to invoke CC_COMPAT. This is a similar problem to what was observed in commit dc960bfe ("h8300: suppress error messages for 'make clean'") Reported-by:
Lucas Henneman <henneman@google.com> Suggested-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Nick Desaulniers authored
As Arnd points out: gcc-4.8 already supported -march=armv8, and we require gcc-5.1 now, so both this #if/#else construct and the corresponding "cc32-option,-march=armv8-a" check should be obsolete now. Link: https://lore.kernel.org/lkml/CAK8P3a3UBEJ0Py2ycz=rHfgog8g3mCOeQOwO0Gmp-iz6Uxkapg@mail.gmail.com/Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Nick Desaulniers authored
Binutils added support for this instruction in commit e797f7e0b2bedc9328d4a9a0ebc63ca7a2dbbebc which shipped in 2.24 (just missing the 2.23 release) but was cherry-picked into 2.23 in commit 27a50d6755bae906bc73b4ec1a8b448467f0bea1. Thanks to Christian and Simon for helping me with the patch archaeology. According to Documentation/process/changes.rst, the minimum supported version of binutils is 2.23. Since all supported versions of GAS support this instruction, drop the assembler invocation, preprocessor flags/guards, and the cross assembler macro that's now unused. This also avoids a recursive self reference in a follow up cleanup patch. Cc: Christian Biesinger <cbiesinger@google.com> Cc: Simon Marchi <simon.marchi@polymtl.ca> Signed-off-by:
-
Mark Brown authored
As for SVE we will track a per task SME vector length for tasks. Convert the existing storage for the vector length into an array and update fpsimd_flush_task() to initialise this in a function. Signed-off-by:
-
