- 14 Dec, 2009 1 commit
-
-
Gertjan van Wingerde authored
rt2800lib incorrectly detected whether RT2800USB was enabled because it didn't account for a modularized RT2800USB driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 10 Dec, 2009 7 commits
-
-
John W. Linville authored
Update "US" and "JP" for current rules, and replace "EU" rules with the world roaming domain (since it was only a pseudo-domain anyway). Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Javier Cardona authored
The patch ("mac80211: Use correct sign for mesh active path refresh.") was actually a bug. Reverted it and improved the explanation of how mesh path refresh works. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Javier Cardona authored
Paths to mesh portals were being timed out immediately after each use in intermediate forwarding nodes. mppath->exp_time is set to the expiration time so assigning it to jiffies was marking the path as expired. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Julia Lawall authored
Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
As shown in Kernel Bugzilla #14761, doing a controller restart after a fatal DMA error does not accomplish anything other than consume the CPU on an affected system. Accordingly, substitute a meaningful message for the restart. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [2.6.32] Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Herton Ronaldo Krzesinski authored
Michael Buesch reports that his rtl8187 gives warnings on suspend ("queueing ieee80211 work while going to suspend" warnings), as rtl8187 can call ieee80211_queue_delayed_work after mac80211 is suspended. This change enhances rtl8187 led code so we can avoid queuing work after mac80211 is suspended: now we register a radio led and make additional checks to ensure led is off/on properly as mac80211 wants. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Without this we have no gaurantee of the integrity of the EEPROM and are likely to encounter a lot of bogus bug reports due to actual issues on the EEPROM. With the EEPROM checksum check in place we can easily rule those issues out. If you run patch during a revert *you* have a card with a busted EEPROM and only older kernel will support that concoction. This patch is a trade off between not accepitng bogus EEPROMs and avoiding bogus bug reports allowing developers to focus instead on real concrete issues. If stable keeps bogus bug reports because of a possibly busted EEPROM feel free to apply this there too. Tested on an AR5414 Cc: stable@kernel.org Cc: jirislaby@gmail.com Cc: akpm@linux-foundation.org Cc: rjw@sisk.pl Cc: me@bobcopeland.com Cc: david.quan@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 09 Dec, 2009 30 commits
-
-
John W. Linville authored
This part was missed in "cfg80211: implement get_wireless_stats", probably because sta_set_sinfo already existed and was only handling dBm signals. Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
When the current_bss is not set, 'iwconfig <iface> key off' does not clear the private flag. Hence after we connect with WEP to an AP and then try to connect with another non-WEP AP, it does not work. This issue will not be seen if supplicant is used. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Anton Vorontsov authored
commit 46ceb60c ("gianfar: Add Multiple group Support") introduced the following build error with CONFIG_NET_POLL_CONTROLLER=y: CC ggianfar.o ggianfar.c: In function 'gfar_netpoll': ggianfar.c:2653: error: invalid storage class for function 'gfar_interrupt' ggianfar.c:2652: warning: ISO C90 forbids mixed declarations and code ggianfar.c:2681: error: invalid storage class for function 'adjust_link' ggianfar.c:2764: error: invalid storage class for function 'gfar_set_multi' ggianfar.c:2855: error: invalid storage class for function 'gfar_clear_exact_match' ggianfar.c:2877: error: invalid storage class for function 'gfar_set_hash_for_addr' ggianfar.c:2898: error: invalid storage class for function 'gfar_set_mac_for_addr' ggianfar.c:2922: error: invalid storage class for function 'gfar_error' ggianfar.c:3020: warning: ISO C90 forbids mixed declarations and code ggianfar.c:3032: error: invalid storage class for function 'gfar_init' ggianfar.c:3037: error: invalid storage class for function 'gfar_exit' ggianfar.c:3041: error: initializer element is not constant ggianfar.c:3042: error: initializer element is not constant ggianfar.c:3042: warning: ISO C90 forbids mixed declarations and code ggianfar.c:3042: error: expected declaration or statement at end of input make[1]: *** [ggianfar.o] Error 1 This patch fixes the issue. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stanislav Brabec authored
About 50% of shutdowns of b44 Ethernet adapter ends by kernel panic with kernels compiled with stack-protector. Checking b44_magic_pattern() return values, one call of b44_magic_pattern() returns 127. It means, that set_bit(128, pmask) was called on line 1509. It means that bit 0 of 17th byte of pmask was overwritten. But pmask has only 16 bytes. Stack corruption happens. It seems that set_bit() on line 1509 always writes one bit off. The fix does not only solve the stack corruption, but also makes Wake On LAN working on my onboard B44 on Asus A7V-333X mainboard. It seems that this problem affects all kernel versions since commit 725ad800 ([PATCH] b44: add wol for old nic) on 2006-06-20. Signed-off-by: Stanislav Brabec <sbrabec@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
It can happen, that tcp_retransmit_skb fails due to some error. In such cases we might end up into a state where tp->retrans_out is zero but that's only because we removed the TCPCB_SACKED_RETRANS bit from a segment but couldn't retransmit it because of the error that happened. Therefore some assumptions that retrans_out checks are based do not necessarily hold, as there still can be an old retransmission but that is only visible in TCPCB_EVER_RETRANS bit. As retransmission happen in sequential order (except for some very rare corner cases), it's enough to check the head skb for that bit. Main reason for all this complexity is the fact that connection dying time now depends on the validity of the retrans_stamp, in particular, that successive retransmissions of a segment must not advance retrans_stamp under any conditions. It seems after quick thinking that this has relatively low impact as eventually TCP will go into CA_Loss and either use the existing check for !retrans_stamp case or send a retransmission successfully, setting a new base time for the dying timer (can happen only once). At worst, the dying time will be approximately the double of the intented time. In addition, tcp_packet_delayed() will return wrong result (has some cc aspects but due to rarity of these errors, it's hardly an issue). One of retrans_stamp clearing happens indirectly through first going into CA_Open state and then a later ACK lets the clearing to happen. Thus tcp_try_keep_open has to be modified too. Thanks to Damian Lukowski <damian@tvk.rwth-aachen.de> for hinting that this possibility exists (though the particular case discussed didn't after all have it happening but was just a debug patch artifact). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Damian Lukowski authored
This patch moves retransmits_timed_out() from include/net/tcp.h to tcp_timer.c, where it is used. Reported-by: Frederic Leroy <fredo@starox.org> Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Damian Lukowski authored
This patch fixes a problem in the TCP connection timeout calculation. Currently, timeout decisions are made on the basis of the current tcp_time_stamp and retrans_stamp, which is usually set at the first retransmission. However, if the retransmission fails in tcp_retransmit_skb(), retrans_stamp is not updated and remains zero. This leads to wrong decisions in retransmits_timed_out() if tcp_time_stamp is larger than the specified timeout, which is very likely. In this case, the TCP connection dies after the first attempted (and unsuccessful) retransmission. With this patch, tcp_skb_cb->when is used instead, when retrans_stamp is not available. This bug has been introduced together with retransmits_timed_out() in 2.6.32, as the number of retransmissions has been used for timeout decisions before. The corresponding commit was 6fa12c85 (Revert Backoff [v3]: Calculate TCP's connection close threshold as a time value.). Thanks to Ilpo Järvinen for code suggestions and Frederic Leroy for testing. Reported-by: Frederic Leroy <fredo@starox.org> Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Yang authored
use common_task instead of reset_task and link_chg_task, so it fix "call cancel_work_sync from the work itself". Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Yang authored
add pci map direction in atl1c_buffer flags, it is used when call pci_unmap apis. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Unified firmware image may not contain MN type of firmware. Driver should fall back to NOMN firmware type instead of going to flash. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
o netif_running() check for enabling interrupt at end of napi poll is not enough to cover firmwar recovery. Instead test __NX_DEV_UP bit. o Avoid re-entry into to netxen_nic_down() with __NX_DEV_UP bit check. Acked-by: Dhananjay Phadke <dhananjay.phadke@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
o To prevent race conditions with other reset events. During suspend/resume and firmware recovery, acquire rtnl_lock, while changing interface state. Acked-by: Dhananjay Phadke <dhananjay.phadke@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Kirjanov authored
Check for valid hw address. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tilman Schmidt authored
Various additions and improvements to the Gigaset driver's README file, and added comments to its userspace visible include file. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tilman Schmidt authored
When built with debugging support, the Gigaset driver enabled some debugging messages by default. Change the default to "all off". Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Asier Llano authored
Fix the locking scheme on the fec_mpc52xx driver. This device can receive IRQs from three sources; the FEC itself, the tx DMA, and the rx DMA. Mutual exclusion was handled by taking a spin_lock() in the critical regions, but because the handlers are run with IRQs enabled, spin_lock() is insufficient and the driver can end up interrupting a critical region anyway from another IRQ. Asier Llano discovered that this occurs when an error IRQ is raised in the middle of handling rx irqs which resulted in an sk_buff memory leak. In addition, locking is spotty at best in the driver and inspection revealed quite a few places with insufficient locking. This patch is based on Asier's initial work, but reworks a number of things so that locks are held for as short a time as possible, so that spin_lock_irqsave() is used everywhere, and so the locks are dropped when calling into the network stack (because the lock only protects the hardware interface; not the network stack). Boot tested on a lite5200 with an NFS root. Has not been performance tested. Signed-off-by: Asier Llano <a.llano@ziv.es> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brice Goglin authored
Use a more effective rss hash by default (src + dst, rather than just src). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
chas williams - CONTRACTOR authored
in routed mode, we don't have a hardware address so netdev_ops doesnt need to validate our hardware address via .ndo_validate_addr Reported-by: Manuel Fuentes <mfuentes@agenciaefe.com> Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
chas williams - CONTRACTOR authored
due to reference counting sk_wmem_alloc now has a value of 1 when all the outstanding data has been sent. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
chas williams - CONTRACTOR authored
fix oops when initializing lane interfaces. lec should probably be changed to use alloc_netdev() instead. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Adds kerneldoc for inet_twsk_unhash() & inet_twsk_bind_unhash(). With help from Randy Dunlap. Suggested-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When we find a timewait connection in __inet_hash_connect() and reuse it for a new connection request, we have a race window, releasing bind list lock and reacquiring it in __inet_twsk_kill() to remove timewait socket from list. Another thread might find the timewait socket we already chose, leading to list corruption and crashes. Fix is to remove timewait socket from bind list before releasing the bind lock. Note: This problem happens if sysctl_tcp_tw_reuse is set. Reported-by: kapil dakhane <kdakhane@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
First patch changes __inet_hash_nolisten() and __inet6_hash() to get a timewait parameter to be able to unhash it from ehash at same time the new socket is inserted in hash. This makes sure timewait socket wont be found by a concurrent writer in __inet_check_established() Reported-by: kapil dakhane <kdakhane@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Here is an updated version, because ixgbe_get_ethtool_stats() needs to call dev_get_stats() or "ethtool -S" wont give correct tx_bytes/tx_packets values. Several cpus can update netdev->stats.tx_bytes & netdev->stats.tx_packets in parallel. In this case, TX stats are under estimated and false sharing takes place. After a pktgen session sending exactly 200000000 packets : # ifconfig fiber0 | grep TX TX packets:198501982 errors:0 dropped:0 overruns:0 carrier:0 Multi queue devices should instead use txq->tx_bytes & txq->tx_packets in their xmit() method (appropriate txq lock already held by caller, no cache line miss), or use appropriate locking. After patch, same pktgen session gives : # ifconfig fiber0 | grep TX TX packets:200000000 errors:0 dropped:0 overruns:0 carrier:0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
A workaround added for all ESB2 devices (adds a delay for all MDIC accesses which resolves an issue with the MDIC ready bit being set prematurely) is applicable only to devices in which the MAC-PHY interconnect is not operating in a certain mode with in-band MDIO. Check the control register for the operating mode and enable the workaround accordingly. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
The GG82563_REG() macro should not be used to determine the offset provided to the e1000e_[read|write]_kmrn_reg() functions since the first argument to the macro is already implied and gets masked off anyway in the functions. The resultant register reads/writes with this patch are functionally the same as before. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
Bit 7 in the CTRL_REG register is actually the Software Definable Pin 3, not the Software Definable Pin 7. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
GCC even warns about it, as reported by Andrew Morton: net/ipv4/tcp.c: In function 'do_tcp_getsockopt': net/ipv4/tcp.c:2544: warning: comparison is always false due to limited range of data type Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Dec, 2009 2 commits
-
-
Linus Torvalds authored
I messed up the merge in d7fc02c7, where the conflict in question wasn't just about CTL_UNNUMBERED being removed, but the 'strategy' field is too (sysctl handling is now done through the /proc interface, with no duplicate protocols for reading the data). Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>