- 01 Aug, 2013 10 commits
-
-
Jack Morgenstein authored
Slaves get the 64B CQE/EQE state from QUERY_HCA, not from the module parameter. If the parameter is set to zero, the slave outputs an incorrect/irrelevant warning message that 64B CQEs/EQEs are supported but not enabled (even if the hypervisor has enabled 64B CQEs/EQEs). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
If the user has not assigned a MAC address to a VM, then don't give it MAC which is based on the PF one. The current derivation scheme is wrong and leads to VM MAC collisions when the number of cards/hypervisors becomes big enough. Instead, just give it zeros and let them figure out what to do with that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
There's a race in IPv6 automatic addess assignment. The address is created with zero lifetime when it's added to various address lists. Before it gets assigned the correct lifetime, there's a window where a new address may be configured. This causes the semi-initiated address to be deleted in addrconf_verify. This was discovered as a reference leak caused by concurrent run of __ipv6_ifa_notify for both RTM_NEWADDR and RTM_DELADDR with the same address. Fix this by setting the lifetime before the address is added to inet6_addr_lst. A few notes: 1. In addrconf_prefix_rcv, by setting update_lft to zero, the if (update_lft) { ... } condition is no longer executed for newly created addresses. This is okay, as the ifp fields are set in ipv6_add_addr now and ipv6_ifa_notify is called (and has been called) through addrconf_dad_start. 2. The removal of the whole block under ifp->lock in inet6_addr_add is okay, too, as tstamp is initialized to jiffies in ipv6_add_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubeček authored
As pointed out by Eric Dumazet, net->ipv6.ip6_rt_last_gc should hold the last time garbage collector was run so that we should update it whenever fib6_run_gc() calls fib6_clean_all(), not only if we got there from ip6_dst_gc(). Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubeček authored
On a high-traffic router with many processors and many IPv6 dst entries, soft lockup in fib6_run_gc() can occur when number of entries reaches gc_thresh. This happens because fib6_run_gc() uses fib6_gc_lock to allow only one thread to run the garbage collector but ip6_dst_gc() doesn't update net->ipv6.ip6_rt_last_gc until fib6_run_gc() returns. On a system with many entries, this can take some time so that in the meantime, other threads pass the tests in ip6_dst_gc() (ip6_rt_last_gc is still not updated) and wait for the lock. They then have to run the garbage collector one after another which blocks them for quite long. Resolve this by replacing special value ~0UL of expire parameter to fib6_run_gc() by explicit "force" parameter to choose between spin_lock_bh() and spin_trylock_bh() and call fib6_run_gc() with force=false if gc_thresh is reached but not max_size. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== This pull request is intended for the 3.11 stream. It is a bit larger than usual, as it includes pulls from most of my feeder trees as well... For the Bluetooth bits, Gustavo says: "A few fixes and devices ID additions for 3.11: * There are 4 new ath3k device ids * Fixed stack memory usage in ath3k. * Fixed the init process of BlueFRITZ! devices, they were failing to init due to an unsupported command we sent. * Fixed wrong use of PTR_ERR in btusb code that was preventing intel devices to work properly. * Fixed race condition between hci_register_dev() and hci_dev_open() that could cause a NULL pointer dereference. * Fixed race condition that could call hci_req_cmd_complete() and make some devices to fail as showed in the log added to the commit message." Regarding the NFC bits, Samuel says: "We have: 1) A build failure fix for the NCI SPI transport layer due to a missing CRC_CCITT Kconfig dependency. 2) A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11 merge window but the typical terminology for loading a firmware to a target is firmware download rather than upload. In order to avoid any confusion in a file exported to userspace, we rename this command to CMD_FW_DOWNLOAD." Samuel's item #2 isn't strictly a fix, but it seems safe and should avoid confusion in the future. As for the mac80211 bits, Johannes says: "I only have three fixes this time, a fix for a suspend regression, a patch correcting the initiator in regulatory code and one fix for mesh station powersave." With respect to the iwlwifi bits, Johannes says: "We have a scan fix for passive channels, a new PCI device ID for an old device, a NIC reset fix, an RF-Kill fix, a fix for powersave when GO interfaces are present as well as an aggregation session fix (for a corner case) and a workaround for a firmware design issue - it only supports a single GTK in D3." Bringing-up the rear with the Atheros trees, Kalle says: "Geert Uytterhoeven fixed an ath10k build problem when NO_DMA=y. I added a missing MAINTAINERS entry for ath10k and updated ath6kl git tree location." Along with the above... Arend van Spriel fixes a brcmfmac WARNING when unplugging the device. Avinash Patil proves a couple of minor mwifiex fixes relating to P2P mode. Luciano Coelho updates the MAINTAINERS entry for the wilink drivers. Stanislaw Gruszka brings an rt2x00 fix for a queue start/stop problem. Stone Piao fixes another mwifiex problem, a command timeout related to P2P mode. Tomasz Moń corrects an endian problem in mwifiex. I'll remind my feeder maintainers to slowdown the patchflow. Beyond that, please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Linus Lüssing authored
If there is no querier on a link then we won't get periodic reports and therefore won't be able to learn about multicast listeners behind ports, potentially leading to lost multicast packets, especially for multicast listeners that joined before the creation of the bridge. These lost multicast packets can appear since c5c23260 ("bridge: Add multicast_querier toggle and disable queries by default") in particular. With this patch we are flooding multicast packets if our querier is disabled and if we didn't detect any other querier. A grace period of the Maximum Response Delay of the querier is added to give multicast responses enough time to arrive and to be learned from before disabling the flooding behaviour again. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Self explanitory dma_mapping_error addition to the 8139 driver, based on this: https://bugzilla.redhat.com/show_bug.cgi?id=947250 It showed several backtraces arising for dma_map_* usage without checking the return code on the mapping. Add the check and abort the rx/tx operation if its failed. Untested as I have no hardware and the reporter has wandered off, but seems pretty straightforward. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 31 Jul, 2013 23 commits
-
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The "pvc" struct has a hole after pvc.sap_family which is not cleared. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
- fix the conversion between cpu and __le32 - replace some pla_ocp and usb_ocp functions with generic_ocp function Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Allocate the required memory before calling usb_control_msg. And the additional memory copy is necessary. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Replace 0 with the result from usbnet_cdc_bind(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Don't replace the usb_control_msg() with usbnet_{read,write}_cmd() which couldn't be called inside suspend/resume callback. Keep the basic functions unlimited. Instead, using usb_autopm_get_interface() and usb_autopm_put_interface() in r815x_mdio_{read,write}(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Some USB buffers use stack which may not be DMA-able. Use the buffers from kmalloc to replace those one. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix association failures not triggering a connect-failure event in cfg80211, from Johannes Berg. 2) Eliminate a potential NULL deref with older iptables tools when configuring xt_socket rules, from Eric Dumazet. 3) Missing RTNL locking in wireless regulatory code, from Johannes Berg. 4) Fix OOPS caused by firmware loading races in ath9k_htc, from Alexey Khoroshilov. 5) Fix usb URB leak in usb_8dev CAN driver, also from Alexey Khoroshilov. 6) VXLAN namespace teardown fails to unregister devices, from Stephen Hemminger. 7) Fix multicast settings getting dropped by firmware in qlcnic driver, from Sucheta Chakraborty. 8) Add sysctl range enforcement for tcp_syn_retries, from Michal Tesar. 9) Fix a nasty bug in bridging where an active timer would get reinitialized with a setup_timer() call. From Eric Dumazet. 10) Fix use after free in new mlx5 driver, from Dan Carpenter. 11) Fix freed pointer reference in ipv6 multicast routing on namespace cleanup, from Hannes Frederic Sowa. 12) Some usbnet drivers report TSO and SG in their feature set, but the usbnet layer doesn't really support them. From Eric Dumazet. 13) Fix crash on EEH errors in tg3 driver, from Gavin Shan. 14) Drop cb_lock when requesting modules in genetlink, from Stanislaw Gruszka. 15) Kernel stack leaks in cbq scheduler and af_key pfkey messages, from Dan Carpenter. 16) FEC driver erroneously signals NETDEV_TX_BUSY on transmit leading to endless loops, from Uwe Kleine-König. 17) Fix hangs from loading mvneta driver, from Arnaud Patard. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) mlx5: fix error return code in mlx5_alloc_uuars() mvneta: Try to fix mvneta when compiled as module mvneta: Fix hang when loading the mvneta driver atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring genetlink: fix usage of NLM_F_EXCL or NLM_F_REPLACE af_key: more info leaks in pfkey messages net/fec: Don't let ndo_start_xmit return NETDEV_TX_BUSY without link net_sched: Fix stack info leak in cbq_dump_wrr(). igb: fix vlan filtering in promisc mode when not in VT mode ixgbe: Fix Tx Hang issue with lldpad on 82598EB genetlink: release cb_lock before requesting additional module net: fec: workaround stop tx during errata ERR006358 qlcnic: Fix diagnostic interrupt test for 83xx adapters. qlcnic: Fix setting Guest VLAN qlcnic: Fix operation type and command type. qlcnic: Fix initialization of work function. Revert "atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring" atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring net/tg3: Fix warning from pci_disable_device() net/tg3: Fix kernel crash ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixesJohn W. Linville authored
Samuel Ortiz <sameo@linux.intel.com> says: 'This is the second NFC fixes pull request for 3.11. We have: - A build failure fix for the NCI SPI transport layer due to a missing CRC_CCITT Kconfig dependency. - A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11 merge window but the typical terminology for loading a firmware to a target is firmware download rather than upload. In order to avoid any confusion in a file exported to userspace, we rename this command into CMD_FW_DOWNLOAD." Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJohn W. Linville authored
Conflicts: net/bluetooth/hci_core.c
-
Luciano Coelho authored
Soon the coelho@ti.com email will not be valid anymore, so change it to my private one. Cc: Luciano Coelho <luca@coelho.fi> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stone Piao authored
We missed bss_mode check for P2P client. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
This patch fixes an issue wherein adhoc rates were being copied into association request from P2P client. Cc: <stable@vger.kernel.org> # 3.10.y Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
This patch fixes an issue wherein association would fail on P2P interfaces. This happened because we are checking priv->mode against NL80211_IFTYPE_STATION. While this check is correct for infrastructure stations, it would fail P2P clients for which mode is NL80211_IFTYPE_P2P_CLIENT. Better check would be bss_role which has only 2 values: STA/AP. Cc: <stable@vger.kernel.org> # 3.10.y Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: - BMIPS SMP fixes - a build fix necessary for older compilers - two more bugs found my Chandras' testing - and one more build fix * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0 MIPS: BMIPS: do not change interrupt routing depending on boot CPU MIPS: powertv: Fix arguments for free_reserved_area() MIPS: Set default CPU type for BCM47XX platforms MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilation MIPS: Fix multiple definitions of UNCAC_BASE.
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull Xen fixes from Konrad Rzeszutek Wilk: - Three fixes for ARM/ARM64 to either compile or not certain generic drivers - Fix for avoiding a potential deadlock when an user space event channel is destroyed. - Fix a workqueue resuming multiple times. * tag 'stable/for-linus-3.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/tmem: do not allow XEN_TMEM on ARM64 xen/evtchn: avoid a deadlock when unbinding an event channel xen/arm: enable PV control for ARM xen/arm64: Don't compile cpu hotplug xenbus: frontend resume cleanup
-
Linus Torvalds authored
Merge tag 'xen-arm-3.11-rc2-warn-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen Pull Xen ARM fix from Stefano Stabellini. Update xen_restart to new calling convention. * tag 'xen-arm-3.11-rc2-warn-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen: xen/arm,arm64: update xen_restart after ff701306 and 7b6d864b
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some tiny USB fixes for 3.11-rc4 Nothing major, some gadget fixes, some new device ids, a new tiny driver for the ANT+ USB device, and a number of fixes for the mos7840 driver that were much needed" * tag 'usb-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: ftdi_sio: add more RT Systems ftdi devices usb: chipidea: fix the build error with randconfig usb: chipidea: cast PORTSC_PTS and DEVLC_PTS macros usb: gadget: udc-core: fix the typo of udc state attribute usb: gadget: f_phonet: remove unused preprocessor conditional usb: gadget: multi: fix error return code in cdc_do_config() USB: mos7840: fix pointer casts USB: mos7840: fix race in led handling USB: mos7840: fix device-type detection USB: mos7840: fix race in register handling USB: serial: add driver for Suunto ANT+ USB device usb: gadget: free opts struct on error recovery usb: gadget: ether: put_usb_function on unbind usb: musb: fix resource passed from glue layer to musb
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are 4 tiny tty and serial driver fixes for 3.11-rc4. Nothing big, a refcount leak, a module alias fix, and two fixes to the mxs-auart serial driver" * tag 'tty-3.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: arc_uart: Fix module alias tty_port: Fix refcounting leak in tty_port_tty_hangup() serial/mxs-auart: increase time to wait for transmitter to become idle serial/mxs-auart: fix race condition in interrupt handler
-
Wei Yongjun authored
Fix to return -ENOMEM from the ioremap error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaud Patard \(Rtp\) authored
When the mvneta driver is compiled as module, the clock is disabled before it's loading. This will reset the registers values and all configuration made by the bootloader. This patch sets the "sgmii serdes configuration" register to a magical value found in: https://github.com/yellowback/ubuntu-precise-armadaxp/blob/master/arch/arm/mach-armadaxp/armada_xp_family/ctrlEnv/mvCtrlEnvLib.c With this change, the interrupts are working/generated and ethernet is working. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaud Patard \(Rtp\) authored
When the mvneta driver is compiled, it'll be loaded with clocks disabled. This implies that the clocks should be enabled again before any register access or it'll hang. To fix it: - enable clock earlier - move timer callback after setting timer.data Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
On Mon, 2013-07-29 at 08:30 -0700, Eric Dumazet wrote: > On Mon, 2013-07-29 at 13:09 +0100, Luis Henriques wrote: > > > > > I confirm that I can't reproduce the issue using this patch. > > > > Thanks, I'll send a polished patch, as this one had an error if > build_skb() returns NULL (in case sk_buff allocation fails) Please try the following patch : It should use 2K frags instead of 4K for normal 1500 mtu Thanks ! [PATCH] atl1c: use custom skb allocator We had reports ( https://bugzilla.kernel.org/show_bug.cgi?id=54021 ) that using high order pages for skb allocations is problematic for atl1c We do not know exactly what the problem is, but we suspect that crossing 4K pages is not well supported by this hardware. Use a custom allocator, using page allocator and 2K fragments for optimal stack behavior. We might make this allocator generic in future kernels. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Luis Henriques <luis.henriques@canonical.com> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Jul, 2013 7 commits
-
-
Pablo Neira authored
Currently, it is not possible to use neither NLM_F_EXCL nor NLM_F_REPLACE from genetlink. This is due to this checking in genl_family_rcv_msg: if (nlh->nlmsg_flags & NLM_F_DUMP) NLM_F_DUMP is NLM_F_MATCH|NLM_F_ROOT. Thus, if NLM_F_EXCL or NLM_F_REPLACE flag is set, genetlink believes that you're requesting a dump and it calls the .dumpit callback. The solution that I propose is to refine this checking to make it stricter: if ((nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP) And given the combination NLM_F_REPLACE and NLM_F_EXCL does not make sense to me, it removes the ambiguity. There was a patch that tried to fix this some time ago (0ab03c2b netlink: test for all flags of the NLM_F_DUMP composite) but it tried to resolve this ambiguity in *all* existing netlink subsystems, not only genetlink. That patch was reverted since it broke iproute2, which is using NLM_F_ROOT to request the dump of the routing cache. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
This is inspired by a5cc68f3 "af_key: fix info leaks in notify messages". There are some struct members which don't get initialized and could disclose small amounts of private information. Acked-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Ortiz authored
Loading a firmware into a target is typically called firmware download, not firmware upload. So we rename the netlink API to NFC_CMD_FW_DOWNLOAD in order to avoid any terminology confusion from userspace. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Uwe Kleine-König authored
Don't test for having link and let hardware deal with this situation. Without this patch I see a machine running an -rt patched Linux being stuck in sch_direct_xmit when it looses link while there is still a packet to be sent. In this case the fec_enet_start_xmit routine returned NETDEV_TX_BUSY which makes the network stack reschedule the packet and so sch_direct_xmit calls fec_enet_start_xmit again. I failed to reproduce a complete hang without -rt, but I think the problem exists there, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefano Stabellini authored
tmem is not supported on arm or arm64 yet. Will revert this once the Xen hypervisor supports it. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Florian Fainelli authored
The current BMIPS SMP code assumes that the slave CPU is physical and logical CPU 1, but on some systems such as BCM3368, the slave CPU is physical CPU0. Fix the code to read the physical CPU (thread ID) we are running this code on, and adjust the relocation vector address based on it. This allows bringing up the second CPU on BCM3368 for instance. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5621/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
Commit 4df715aa ("MIPS: BMIPS: support booting from physical CPU other than 0") changed the interupt routing when we are booting from physical CPU 0, but the settings are actually correct if we are booting from physical CPU 0 or CPU 1. Revert that specific change. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5622/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-