- 31 Oct, 2022 26 commits
-
-
Martin Kaiser authored
The caller of OnAction_p2p has already checked the action category. We can remove the check in OnAction_p2p. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20221030173326.1588647-7-martin@kaiser.cxSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kaiser authored
OnAction_p2p is called only by OnAction, its return value is not checked. We can make it a static void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
OnAction_back is called only by OnAction, its return value is not checked. We can make it a static void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The on_action_public function is called only by OnAction. This function also lives in rtw_mlme_ext.c and does not check the return value from on_action_public. We can make on_action_public a static void function. The ret variable is no longer needed if we don't return a value. It can be removed. Reported-by:
kernel test robot <lkp@intel.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The caller of on_action_public has already checked the action category. We can remove the check in on_action_public. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Define a struct ieee80211_mgmt and use it to read the destination address. This replaces one call to the driver-specific GetAddr1Ptr function, which should eventually be removed. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Nam Cao authored
In r8712_init_drv_sw(), whenever any function call returns error, it is returned immediately without properly cleaning up the other successfully executed functions. This can cause memory leak. Instead of return immediately, free all the allocated buffers first. Tested-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Signed-off-by:
Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/0a3414b12031f6cdcba81a8725e91eb9567ff34f.1666688642.git.namcaov@gmail.comSigned-off-by:
-
Nam Cao authored
The return value of _r8712_init_xmit_priv() is never checked and the driver always continue execution as if all is well. This will cause problems if, for example, buffers cannot be allocated and the driver continue and use those buffers. Check for return value of _r8712_init_xmit_priv() and return error (if any) during probing. Tested-by:
-
Nam Cao authored
The function _r8712_init_recv_priv() and also r8712_init_recv_priv() just returns silently if they fail to allocate memory. Change their return type to int and add necessary checks and handling if they return -ENOMEM Tested-by:
-
Nam Cao authored
This reverts commit 5d3da4a2. This commit annotated false positive for kmemleak. The reasoning is that the buffers are freed when the driver is unloaded. However, there is actually potential memory leak when probe fails. Tested-by:
-
Martin Kaiser authored
Replace the last get_da call with ieee80211_get_DA and remove the get_da function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Replace a call to the driver-specific get_da function with ieee80211_get_DA from ieee80211.h. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Aaron Lawrence authored
Rewritten a comparison to NULL with a negation operator in accordance with the Linux kernel coding-style regulations. The fix was directly recommended by the checkpatch script. Tested-by:
Aaron Lawrence <t4rmin@zohomail.com> Link: https://lore.kernel.org/r/ca33296630627020694f4b653580f689a8a3d1c7.1666787061.git.t4rmin@zohomail.comSigned-off-by:
-
Aaron Lawrence authored
Split a multiple assignments statement to individual assignments on different lines in accordance with the Linux kernel coding-style regulations. Also repositioned comments on it and the statement before for increased legibility. The multiple assignments issue was found by the checkpatch script, with the comments legibility issue were through direct observation. Tested-by:
-
Aaron Lawrence authored
Added braces around needed arms of statements which needs them in accordance with the Linux kernel coding-style regulations. The issues were found with the help of the checkpatch script. Tested-by:
-
Aaron Lawrence authored
Aligned multiple lines to be at the same indentation of open parentheses before it in accordance with the Linux kernel coding-style regulations. The issues were found by running the checkpatch script on the file. Tested-by:
-
Aaron Lawrence authored
Removed multiple blank lines that are not necessary before a closing brace. The issues were found with the checkpatch script and were dealt with in accordance with the Linux kernel coding-style guidelines. Tested-by:
-
Aaron Lawrence authored
Removed multiple unnecessary blank lines in accordance with the Linux kernel coding-style regulations. The issues were reported by the checkpatch script. Tested-by:
-
Yogesh Hegde authored
Rename variables * rateIndex to rate_index * rateBitmap to rate_bitmap to avoid CamelCase which is not accepted by checkpatch.pl . Signed-off-by:
Yogesh Hegde <yogi.kernel@gmail.com> Link: https://lore.kernel.org/r/20221030133204.GA416592@zephyrusSigned-off-by:
-
Aaron Lawrence authored
This patch is intended to remove unnecessary parentheses in the rtllib_module.c file following the Linux kernel coding-style regulations. The modification is recommended by the checkpatch script. Signed-off-by:
-
Kang Minchul authored
Make function rtw_sta_flush to void in order to prevent cocci warning as follows: Unneeded variable: "ret". Return "0" on line 1031 Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Kang Minchul <tegongkang@gmail.com> Link: https://lore.kernel.org/r/20221025170621.271903-5-tegongkang@gmail.comSigned-off-by:
-
Kang Minchul authored
Return 0 directly instead of storing it in a variable. This can prevent cocci warning as follows: Unneeded variable: "pull". Return "0" on line 298 Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Kang Minchul authored
Return _SUCCESS directly instead of storing it in a variable. This can prevent cocci warning as follows: Unneeded variable: "ret". Return "_SUCCESS" on line 1516 Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Kang Minchul authored
Returning value 0 directly instead of storing it in variable ret. This commit can prevent cocci warning as follows: Unneeded variable: "ret". Return "0" on line 3030 Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
Replace a ternary operator usage with the min() macro to improve readability. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20221030081020.8533-1-straube.linux@gmail.comSigned-off-by:
-
Emily Peri authored
Ternary statements that pick the min of two values can be replaced by the macro min_t(). This improves readability, since its quicker to understand min_t(type, x, y) than x < y ? x : y. Issue found by coccicheck. Signed-off-by:
Emily Peri <eperi1024@gmail.com> Link: https://lore.kernel.org/r/Y1wh1zYMAbbKSrGB@marshmallowSigned-off-by:
-
- 25 Oct, 2022 14 commits
-
-
Michael Straube authored
There are some unused macros in wifi.h. Remove them. Signed-off-by:
-
Aaron Lawrence authored
Removal of multiple unnecessary blank lines in accordance with the Linux kernel coding-style regulations. Said issues ware detected on this file by the checkpatch script. Signed-off-by:
-
Emily Peri authored
Remove/add tabs in block statements in rtl8723bs/core to fix checkpatch warnings for suspect code indent for conditionals. Signed-off-by:
-
Aaron Lawrence authored
Removed a blank line before a closing brace as it is not necessary as per the Linux coding-style regulations. The issue was flagged by the checkpatch script. Signed-off-by:
-
Aaron Lawrence authored
Fixed several lines that end with an open parenthesis to not end with it anymore, as per the Linux kernel coding-style regulations. The issues were flagged by the checkpatch script. Signed-off-by:
-
Aaron Lawrence authored
Added multiple spaces around operators which needs it as per the Linux kernel coding-style regulations. The issues were flagged by the checkpatch script. Signed-off-by:
-
Aaron Lawrence authored
Aligned multiple statements to match the open parenthesis on the line before it as per the Linux kernel coding-style regulations. The issues were flagged by the checkpatch script. Signed-off-by:
-
Aaron Lawrence authored
Multiple blank lines are condensed into a single blank line as per the Linux kernel coding-style regulations. The issues were flagged by the checkpatch script. Signed-off-by:
-
Martin Kaiser authored
bCardDisableWOHSM in struct adapter is only written but never read. It can be removed. Signed-off-by:
-
Martin Kaiser authored
The only caller of _issue_probereq_p2p sets wait_ack = false. Remove the wait_ack parameter and the code that would run only if wait_ack == true. Signed-off-by:
-
Martin Kaiser authored
NetworkTypeInUse from struct wlan_bssid_ex is not used. Remove NetworkTypeInUse itself, the code to set it and the enum for its possible values. Signed-off-by:
-
Martin Kaiser authored
pcmd_obj was allocated with kzalloc, its memory is filled with 0s. There's no need to set rsp and rspsz to NULL or 0 again. Signed-off-by:
-
Martin Kaiser authored
Use is_multicast_ether_addr to check for a multicast address instead of reimplementing this check in the driver. Signed-off-by:
-
Martin Kaiser authored
Remove the go2asoc variable in OnAuthClient and call start_clnt_assoc directly. This makes the code a tiny bit shorter. Signed-off-by:
-
