Daniel Borkmann says:

====================
pull-request: bpf 2021-01-20

1) Fix wrong bpf_map_peek_elem_proto helper callback, from Mircea Cirjaliu.

2) Fix signed_{sub,add32}_overflows type truncation, from Daniel Borkmann.

3) Fix AF_XDP to also clear pools for inactive queues, from Maxim Mikityanskiy.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Fix signed_{sub,add32}_overflows type handling
  xsk: Clear pool even for inactive queues
  bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback
====================

Link: https://lore.kernel.org/r/20210120163439.8160-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy
comment). It looks like this might have slipped in via copy/paste issue, also
given prior to 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking")
the signature of signed_sub_overflows() had s64 a and s64 b as its input args
whereas now they are truncated to s32. Thus restore proper types. Also, the case
of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both
have s32 as inputs, therefore align the former.

Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: De4dCr0w <sa516203@mail.ustc.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

The previous commit 32efcc06 ("tcp: export count for rehash attempts")
would mis-account rehashing SNMP and socket stats:

  a. During handshake of an active open, only counts the first
     SYN timeout

  b. After handshake of passive and active open, stop updating
     after (roughly) TCP_RETRIES1 recurring RTOs

  c. After the socket aborts, over count timeout_rehash by 1

This patch fixes this by checking the rehash result from sk_rethink_txhash.

Fixes: 32efcc06 ("tcp: export count for rehash attempts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The > comparison should be >= to prevent accessing one element beyond
the end of the dev->vlans[] array in the caller function, b53_vlan_add().
The "dev->vlans" array is allocated in the b53_switch_init() function
and it has "dev->num_vlans" elements.

Fixes: a2482d2c ("net: dsa: b53: Plug in VLAN support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwandaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Heiner Kallweit reported that some skbs were sent with
the following invalid GSO properties :
- gso_size > 0
- gso_type == 0

This was triggerring a WARN_ON_ONCE() in rtl8169_tso_csum_v2.

Juerg Haefliger was able to reproduce a similar issue using
a lan78xx NIC and a workload mixing TCP incoming traffic
and forwarded packets.

The problem is that tcp_add_backlog() is writing
over gso_segs and gso_size even if the incoming packet will not
be coalesced to the backlog tail packet.

While skb_try_coalesce() would bail out if tail packet is cloned,
this overwriting would lead to corruptions of other packets
cooked by lan78xx, sharing a common super-packet.

The strategy used by lan78xx is to use a big skb, and split
it into all received packets using skb_clone() to avoid copies.
The drawback of this strategy is that all the small skb share a common
struct skb_shared_info.

This patch rewrites TCP gso_size/gso_segs handling to only
happen on the tail skb, since skb_try_coalesce() made sure
it was not cloned.

Fixes: 4f693b55 ("tcp: implement coalescing on backlog queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: Juerg Haefliger <juergh@canonical.com>
Tested-by: Juerg Haefliger <juergh@canonical.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209423
Link: https://lore.kernel.org/r/20210119164900.766957-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.
Reported-by: Antoine Tenart <atenart@redhat.com>
Fixes: 0d29169a ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the code because NCI_CORE_INIT_CMD includes two parameters in NCI2.0
but there is no parameters in NCI1.x.

Fixes: bcd684aa ("net/nfc/nci: Support NCI 2.x initial sequence")
Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20210118205522.317087-1-bongsu.jeon@samsung.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

sh_eth_close() does a synchronous power down of the device before
marking it closed.  Revert the order, to make sure the device is never
marked opened while suspended.

While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as
there is no reason to do a synchronous power down.

Fixes: 7fa2955f ("sh_eth: Fix sleeping function called from invalid context")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be
logically done when RXCSUM offload is off.

Fixes: 14136564 ("net: Add TLS RX offload feature")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20210117151538.9411-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Guillaume Nault says:

====================
ipv4: Ensure ECN bits don't influence source address validation

Functions that end up calling fib_table_lookup() should clear the ECN
bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated
differently.

Most functions already clear the ECN bits, but there are a few cases
where this is not done. This series only fixes the ones related to
source address validation.
====================

Link: https://lore.kernel.org/r/cover.1610790904.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.

Reproducer:

  Create two netns, connected with a veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/32 dev veth10

  Add a route to ns1 in ns0:
  $ ip -netns ns0 route add 192.0.2.11/32 dev veth01

  In ns1, only packets with TOS 4 can be routed to ns0:
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10

  Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
  is 4:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 0% packet loss ...

  Now use iptable's rpfilter module in ns1:
  $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP

  Not-ECT and ECT(1) packets still pass:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...

  But ECT(0) and ECN packets are dropped:
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 100% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 100% packet loss ...

After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.

Fixes: 8f97339d ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp_v4_early_demux() is the only function that calls
ip_mc_validate_source() with a TOS that hasn't been masked with
IPTOS_RT_MASK.

This results in different behaviours for incoming multicast UDPv4
packets, depending on if ip_mc_validate_source() is called from the
early-demux path (udp_v4_early_demux) or from the regular input path
(ip_route_input_noref).

ECN would normally not be used with UDP multicast packets, so the
practical consequences should be limited on that side. However,
IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align
with the non-early-demux path behaviour.

Reproducer:

  Setup two netns, connected with veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10

  In ns0, add route to multicast address 224.0.2.0/24 using source
  address 198.51.100.10:
  $ ip -netns ns0 address add 198.51.100.10/32 dev lo
  $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10

  In ns1, define route to 198.51.100.10, only for packets with TOS 4:
  $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10

  Also activate rp_filter in ns1, so that incoming packets not matching
  the above route get dropped:
  $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1

  Now try to receive packets on 224.0.2.11:
  $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof -

  In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is,
  tos 6 for socat):
  $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test0" message is properly received by socat in ns1, because
  early-demux has no cached dst to use, so source address validation
  is done by ip_route_input_mc(), which receives a TOS that has the
  ECN bits masked.

  Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0):
  $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6

  The "test1" message isn't received by socat in ns1, because, now,
  early-demux has a cached dst to use and calls ip_mc_validate_source()
  immediately, without masking the ECN bits.

Fixes: bc044e8d ("udp: perform source validation for mcast early demux")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The number of queues can change by other means, rather than ethtool. For
example, attaching an mqprio qdisc with num_tc > 1 leads to creating
multiple sets of TX queues, which may be then destroyed when mqprio is
deleted. If an AF_XDP socket is created while mqprio is active,
dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may
decrease with deletion of mqprio, which will mean that the pool won't be
NULLed, and a further increase of the number of TX queues may expose a
dangling pointer.

To avoid any potential misbehavior, this commit clears pool for RX and
TX queues, regardless of real_num_*_queues, still taking into
consideration num_*_queues to avoid overflows.

Fixes: 1c1efc2a ("xsk: Create and free buffer pool independently from umem")
Fixes: a41b4f3c ("xsk: simplify xdp_clear_umem_at_qid implementation")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20210118160333.333439-1-maximmi@mellanox.com

I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem()
instead of bpf_map_pop_elem(). In practice it may have been less likely
hit when under JIT given shielded via 84430d42 ("bpf, verifier: avoid
retpoline for map push/pop/peek operation").

Fixes: f1a2e44a ("bpf: add queue and stack maps")
Signed-off-by: Mircea Cirjaliu <mcirjaliu@bitdefender.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mauricio Vasquez <mauriciovasquezbernal@gmail.com>
Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com

Geert Uytterhoeven says:

====================
sh_eth: Fix reboot crash

This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth
device is not opened will cause a crash.

Changes compared to v1:
  - Export mdiobb_{read,write}(),
  - Call mdiobb_{read,write}() now they are exported,
  - Use mii_bus.parent to avoid bb_info.dev copy,
  - Drop RFC state.

Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers
itself, and use them either manually (through a new parameter to
alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or
automatically (e.g. if pm_runtime_enabled() returns true).  Note that
the latter requires a "struct device *" parameter to operate on.
Currently there are only two drivers that call alloc_mdio_bitbang() and
use Runtime PM: the Renesas sh_eth and ravb drivers.  This series fixes
the former, while the latter is not affected (it keeps the device
powered all the time between driver probe and driver unbind, and
changing that seems to be non-trivial).
====================

Link: https://lore.kernel.org/r/20210118150656.796584-1-geert+renesas@glider.beSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Wolfram reports that his R-Car H2-based Lager board can no longer be
rebooted in v5.11-rc1, as it crashes with an imprecise external abort.
The issue can be reproduced on other boards (e.g. Koelsch with R-Car
M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is
down at reboot time:

    Unhandled fault: imprecise external abort (0x1406) at 0x00000000
    pgd = (ptrval)
    [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000
    Internal error: : 1406 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 1105 Comm: init Tainted: G        W         5.10.0-rc1-00402-ge2f016cf #1048
    Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
    PC is at sh_mdio_ctrl+0x44/0x60
    LR is at sh_mmd_ctrl+0x20/0x24
    ...
    Backtrace:
    [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24)
     r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4
    [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8)
    [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc)
     r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001
    [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0)
     r7:0000001f r6:00000001 r5:c221e000 r4:c221e000
    [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54)
     r7:0000001f r6:00000001 r5:c221e000 r4:c221e458
    [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20)
     r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800
    [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80)
    [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50)
     r5:c229f800 r4:c229f800
    [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c)
     r5:c229f800 r4:c229f804
    [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8)
    [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48)
     r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000
    [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60)
    [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208)
     r5:4321fedc r4:01234567
    [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c)
     r7:00000058 r6:00000000 r5:00000000 r4:00000000
    [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54)

As of commit e2f016cf ("net: phy: add a shutdown procedure"),
system reboot calls phy_disable_interrupts() during shutdown.  As this
happens unconditionally, the PHY registers may be accessed while the
device is suspended, causing undefined behavior, which may crash the
system.

Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by
wrappers that take care of Runtime PM, to resume the device when needed.
Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers
can call them from their MDIO read/write wrappers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix incorrect user_ptr dereferencing when handling port param get/set:

    idx [0] stores the 'struct devlink' pointer;
    idx [1] stores the 'struct devlink_port' pointer;

Fixes: 637989b5 ("devlink: Always use user_ptr[0] for devlink and simplify post_doit")
CC: Parav Pandit <parav@mellanox.com>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20210119085333.16833-1-vadym.kochan@plvision.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.

The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():

    RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
    as long as the receiver continues to respond probes. We support
    this by default and reset icsk_probes_out with incoming ACKs.

This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.

In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.

Fixes: 9721e709 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall <william.mccall@gmail.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomainSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matteo Croce says:

====================
ipv6: fixes for the multicast routes

Fix two wrong flags in the IPv6 multicast routes created
by the autoconf code.
====================

Link: https://lore.kernel.org/r/20210115184209.78611-1-mcroce@linux.microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The multicast route ff00::/8 is created with type RTN_UNICAST:

  $ ip -6 -d route
  unicast ::1 dev lo proto kernel scope global metric 256 pref medium
  unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
  unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium

Set the type to RTN_MULTICAST which is more appropriate.

Fixes: e8478e80 ("net/ipv6: Save route type in rt6_info")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ff00::/8 multicast route is created without specifying the fc_protocol
field, so the default RTPROT_BOOT value is used:

  $ ip -6 -d route
  unicast ::1 dev lo proto kernel scope global metric 256 pref medium
  unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
  unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium

As the documentation says, this value identifies routes installed during
boot, but the route is created when interface is set up.
Change the value to RTPROT_KERNEL which is a better value.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Various fixes:
 * kernel-doc parsing fixes
 * incorrect debugfs string checks
 * locking fix in regulatory
 * some encryption-related fixes

* tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
  mac80211: check if atf has been disabled in __ieee80211_schedule_txq
  mac80211: do not drop tx nulldata packets on encrypted links
  mac80211: fix encryption key selection for 802.3 xmit
  mac80211: fix fast-rx encryption check
  mac80211: fix incorrect strlen of .write in debugfs
  cfg80211: fix a kerneldoc markup
  cfg80211: Save the regulatory domain with a lock
  cfg80211/mac80211: fix kernel-doc for SAR APIs
====================

Link: https://lore.kernel.org/r/20210118204750.7243-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mv88e6xxx_port_vlan_join checks whether the VTU already contains an
entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely
changes the relevant .member[] element and loads the updated entry
into the VTU.

However, at least for the mv88e6250, the on-stack struct
mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly
initialized, neither in mv88e6xxx_port_vlan_join() nor inside the
getnext implementation. So the new entry has random garbage for the
STU bits, breaking VLAN filtering.

When the VTU entry is initially created, those bits are all zero, and
we should make sure to keep them that way when the entry is updated.

Fixes: 92307069 (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The blamed commit was too aggressive, and it made ocelot_netdevice_event
react only to network interface events emitted for the ocelot switch
ports.

In fact, only the PRECHANGEUPPER should have had that check.

When we ignore all events that are not for us, we miss the fact that the
upper of the LAG changes, and the bonding interface gets enslaved to a
bridge. This is an operation we could offload under certain conditions.

Fixes: 7afb3e57 ("net: mscc: ocelot: don't handle netdev events for other netdevs")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 3226b158 ("net: avoid 32 x truesize under-estimation for
tiny skbs") ensured that skbs with data size lower than 1025 bytes
will be kmalloc'ed to avoid excessive page cache fragmentation and
memory consumption.
However, the fix adressed only __napi_alloc_skb() (primarily for
virtio_net and napi_get_frags()), but the issue can still be achieved
through __netdev_alloc_skb(), which is still used by several drivers.
Drivers often allocate a tiny skb for headers and place the rest of
the frame to frags (so-called copybreak).
Mirror the condition to __netdev_alloc_skb() to handle this case too.

Since v1 [0]:
 - fix "Fixes:" tag;
 - refine commit message (mention copybreak usecase).

[0] https://lore.kernel.org/netdev/20210114235423.232737-1-alobakin@pm.me

Fixes: a1c7fff7 ("net: netdev_alloc_skb() use build_skb()")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210115150354.85967-1-alobakin@pm.meSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tc_index being 16bit wide, we need to check that TCA_TCINDEX_SHIFT
attribute is not silly.

UBSAN: shift-out-of-bounds in net/sched/cls_tcindex.c:260:29
shift exponent 255 is too large for 32-bit type 'int'
CPU: 0 PID: 8516 Comm: syz-executor228 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 valid_perfect_hash net/sched/cls_tcindex.c:260 [inline]
 tcindex_set_parms.cold+0x1b/0x215 net/sched/cls_tcindex.c:425
 tcindex_change+0x232/0x340 net/sched/cls_tcindex.c:546
 tc_new_tfilter+0x13fb/0x21b0 net/sched/cls_api.c:2127
 rtnetlink_rcv_msg+0x8b6/0xb80 net/core/rtnetlink.c:5555
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2336
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2390
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2423
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114185229.1742255-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot report reminded us that very big ewma_log were supported in the past,
even if they made litle sense.

tc qdisc replace dev xxx root est 1sec 131072sec ...

While fixing the bug, also add boundary checks for ewma_log, in line
with range supported by iproute2.

UBSAN: shift-out-of-bounds in net/core/gen_estimator.c:83:38
shift exponent -1 is negative
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 est_timer.cold+0xbb/0x12d net/core/gen_estimator.c:83
 call_timer_fn+0x1a5/0x710 kernel/time/timer.c:1417
 expire_timers kernel/time/timer.c:1462 [inline]
 __run_timers.part.0+0x692/0xa80 kernel/time/timer.c:1731
 __run_timers kernel/time/timer.c:1712 [inline]
 run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1744
 __do_softirq+0x2bc/0xa77 kernel/softirq.c:343
 asm_call_irq_on_stack+0xf/0x20
 </IRQ>
 __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline]
 run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline]
 do_softirq_own_stack+0xaa/0xd0 arch/x86/kernel/irq_64.c:77
 invoke_softirq kernel/softirq.c:226 [inline]
 __irq_exit_rcu+0x17f/0x200 kernel/softirq.c:420
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:432
 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1096
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:628
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:79 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:169 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516

Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210114181929.1717985-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

iproute2 probably never goes beyond 8 for the cell exponent,
but stick to the max shift exponent for signed 32bit.

UBSAN reported:
UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22
shift exponent 130 is too large for 32-bit type 'int'
CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x183/0x22e lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:148 [inline]
 __ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
 __detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389
 qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435
 cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180
 qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246
 tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662
 rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564
 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0x5a2/0x900 net/socket.c:2345
 ___sys_sendmsg net/socket.c:2399 [inline]
 __sys_sendmsg+0x319/0x400 net/socket.c:2432
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210114160637.1660597-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2021-01-16

1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in
   link creation's error path causing a refcount underflow, from Jiri Olsa.

2) Fix BTF validation errors for the case where kernel modules don't declare
   any new types and end up with an empty BTF, from Andrii Nakryiko.

3) Fix BPF local storage helpers to first check their {task,inode} owners for
   being NULL before access, from KP Singh.

4) Fix a memory leak in BPF setsockopt handling for the case where optlen is
   zero and thus temporary optval buffer should be freed, from Stanislav Fomichev.

5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for
   raw_tracepoint caused by too big ctx_size_in, from Song Liu.

6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL}
   registers were spilled to stack but not recognized, from Gilad Reti.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  MAINTAINERS: Update my email address
  selftests/bpf: Add verifier test for PTR_TO_MEM spill
  bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
  bpf: Reject too big ctx_size_in for raw_tp test run
  libbpf: Allow loading empty BTFs
  bpf: Allow empty module BTFs
  bpf: Don't leak memory in bpf getsockopt when optlen == 0
  bpf: Update local storage test to check handling of null ptrs
  bpf: Fix typo in bpf_inode_storage.c
  bpf: Local storage helpers should check nullness of owner ptr passed
  bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
====================

Link: https://lore.kernel.org/r/20210116002025.15706-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

fl_set_enc_opt() simply checks if there are still bytes left to parse,
but this is not sufficent as syzbot seems to be able to generate
malformatted netlink messages. nla_ok() is more strict so should be
used to validate the next nlattr here.

And nla_validate_nested_deprecated() has less strict check too, it is
probably too late to switch to the strict version, but we can just
call nla_ok() too after it.

Reported-and-tested-by: syzbot+2624e3778b18fc497c92@syzkaller.appspotmail.com
Fixes: 0a6e7778 ("net/sched: allow flower to match tunnel options")
Fixes: 79b1011c ("net: sched: allow flower to match erspan options")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210115185024.72298-1-xiyou.wangcong@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

My Intel email will stop working in a not too distant future. Move my
MAINTAINERS entries to my kernel.org address.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210115104337.7751-1-bjorn.topel@gmail.com

In rvu_mbox_handler_cgx_mac_addr_get()
and rvu_mbox_handler_cgx_mac_addr_set(),
the msg is expected only from PFs that are mapped to CGX LMACs.
It should be checked before mapping,
so we add the is_cgx_config_permitted() in the functions.

Fixes: 96be2e0d ("octeontx2-af: Support for MAC address filters in CGX")
Signed-off-by: Yingjie Wang <wangyingjie55@126.com>
Reviewed-by: Geetha sowjanya<gakula@marvell.com>
Link: https://lore.kernel.org/r/1610719804-35230-1-git-send-email-wangyingjie55@126.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-kselftest-fixes-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "One single fix to skip BPF selftests by default.

  BPF selftests have a hard dependency on cutting edge versions of tools
  in the BPF ecosystem including LLVM.

  Skipping BPF allows by default will make it easier for users
  interested in running kselftest as a whole. Users can include BPF in
  Kselftest build by via SKIP_TARGETS variable"

* tag 'linux-kselftest-fixes-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: Skip BPF seftests by default

Pull networking fixes from Jakub Kicinski:
 "We have a few fixes for long standing issues, in particular Eric's fix
  to not underestimate the skb sizes, and my fix for brokenness of
  register_netdevice() error path. They may uncover other bugs so we
  will keep an eye on them. Also included are Willem's fixes for
  kmap(_atomic).

  Looking at the "current release" fixes, it seems we are about one rc
  behind a normal cycle. We've previously seen an uptick of "people had
  run their test suites" / "humans actually tried to use new features"
  fixes between rc2 and rc3.

  Summary:

  Current release - regressions:

   - fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
     IPV6_CSUM

   - dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
     user is admin for backward-compatibility

   - selftests/tls: fix selftests build after adding ChaCha20-Poly1305

  Current release - always broken:

   - ppp: fix refcount underflow on channel unbridge

   - bnxt_en: clear DEFRAG flag in firmware message when retry flashing

   - smc: fix out of bound access in the new netlink interface

  Previous releases - regressions:

   - fix use-after-free with UDP GRO by frags

   - mptcp: better msk-level shutdown

   - rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
     request

   - i40e: xsk: fix potential NULL pointer dereferencing

  Previous releases - always broken:

   - skb frag: kmap_atomic fixes

   - avoid 32 x truesize under-estimation for tiny skbs

   - fix issues around register_netdevice() failures

   - udp: prevent reuseport_select_sock from reading uninitialized socks

   - dsa: unbind all switches from tree when DSA master unbinds

   - dsa: clear devlink port type before unregistering slave netdevs

   - can: isotp: isotp_getname(): fix kernel information leak

   - mlxsw: core: Thermal control fixes

   - ipv6: validate GSO SKB against MTU before finish IPv6 processing

   - stmmac: use __napi_schedule() for PREEMPT_RT

   - net: mvpp2: remove Pause and Asym_Pause support

  Misc:

   - remove from MAINTAINERS folks who had been inactive for >5yrs"

* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  mptcp: fix locking in mptcp_disconnect()
  net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
  MAINTAINERS: dccp: move Gerrit Renker to CREDITS
  MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
  MAINTAINERS: tls: move Aviad to CREDITS
  MAINTAINERS: ena: remove Zorik Machulsky from reviewers
  MAINTAINERS: vrf: move Shrijeet to CREDITS
  MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
  MAINTAINERS: altx: move Jay Cliburn to CREDITS
  net: avoid 32 x truesize under-estimation for tiny skbs
  nt: usb: USB_RTL8153_ECM should not default to y
  net: stmmac: fix taprio configuration when base_time is in the past
  net: stmmac: fix taprio schedule configuration
  net: tip: fix a couple kernel-doc markups
  net: sit: unregister_netdevice on newlink's error path
  net: stmmac: Fixed mtu channged by cache aligned
  cxgb4/chtls: Fix tid stuck due to wrong update of qid
  i40e: fix potential NULL pointer dereferencing
  net: stmmac: use __napi_schedule() for PREEMPT_RT
  can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
  ...

Check if atf has been disabled in __ieee80211_schedule_txq() in order to
avoid a given sta is always put to the beginning of the active_txqs list
and never moved to the end since deficit is not decremented in
ieee80211_sta_register_airtime()

Fixes: b4809e94 ("mac80211: Add airtime accounting and scheduling to TXQs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/93889406c50f1416214c079ca0b8c9faecc5143e.1608975195.git.lorenzo@kernel.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211_tx_h_select_key drops any non-mgmt packets without a key when
encryption is used. This is wrong for nulldata packets that can't be
encrypted and are sent out for probing clients and indicating 4-address
mode.
Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Fixes: a0761a30 ("mac80211: drop data frames without key on encrypted links")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218191525.1168-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When using WEP, the default unicast key needs to be selected, instead of
the STA PTK.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218184718.93650-4-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When using WEP, the default unicast key needs to be selected, instead of
the STA PTK.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218184718.93650-5-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

This fixes strlen mismatch problems happening in some .write callbacks
of debugfs.

When trying to configure airtime_flags in debugfs, an error appeared:
ash: write error: Invalid argument

The error is returned from kstrtou16() since a wrong length makes it
miss the real end of input string.  To fix this, use count as the string
length, and set proper end of string for a char buffer.

The debug print is shown - airtime_flags_write: count = 2, len = 8,
where the actual length is 2, but "len = strlen(buf)" gets 8.

Also cleanup the other similar cases for the sake of consistency.
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210112032028.7482-1-shayne.chen@mediatek.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>