- 29 Aug, 2019 40 commits
-
-
Allison Henderson authored
commit 4c74a56b upstream. This patch adds a subroutine xfs_attr_try_sf_addname used by xfs_attr_set. This subrotine will attempt to add the attribute name specified in args in shortform, as well and perform error handling previously done in xfs_attr_set. This patch helps to pre-simplify xfs_attr_set for reviewing purposes and reduce indentation. New function will be added in the next patch. [dgc: moved commit to helper function, too.] Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Allison Henderson authored
commit e2421f0b upstream. This patch moves fs/xfs/xfs_attr.h to fs/xfs/libxfs/xfs_attr.h since xfs_attr.c is in libxfs. We will need these later in xfsprogs. Signed-off-by:
-
Brian Foster authored
commit 6958d11f upstream. We've had rather rare reports of bmap btree block corruption where the bmap root block has a level count of zero. The root cause of the corruption is so far unknown. We do have verifier checks to detect this form of on-disk corruption, but this doesn't cover a memory corruption variant of the problem. The latter is a reasonable possibility because the root block is part of the inode fork and can reside in-core for some time before inode extents are read. If this occurs, it leads to a system crash such as the following: BUG: unable to handle kernel paging request at ffffffff00000221 PF error: [normal kernel read fault] ... RIP: 0010:xfs_trans_brelse+0xf/0x200 [xfs] ... Call Trace: xfs_iread_extents+0x379/0x540 [xfs] xfs_file_iomap_begin_delay+0x11a/0xb40 [xfs] ? xfs_attr_get+0xd1/0x120 [xfs] ? iomap_write_begin.constprop.40+0x2d0/0x2d0 xfs_file_iomap_begin+0x4c4/0x6d0 [xfs] ? __vfs_getxattr+0x53/0x70 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 iomap_apply+0x63/0x130 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 iomap_file_buffered_write+0x62/0x90 ? iomap_write_begin.constprop.40+0x2d0/0x2d0 xfs_file_buffered_aio_write+0xe4/0x3b0 [xfs] __vfs_write+0x150/0x1b0 vfs_write+0xba/0x1c0 ksys_pwrite64+0x64/0xa0 do_syscall_64+0x5a/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The crash occurs because xfs_iread_extents() attempts to release an uninitialized buffer pointer as the level == 0 value prevented the buffer from ever being allocated or read. Change the level > 0 assert to an explicit error check in xfs_iread_extents() to avoid crashing the kernel in the event of localized, in-core inode corruption. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Darrick J. Wong authored
commit 1fb254aa upstream. Benjamin Moody reported to Debian that XFS partially wedges when a chgrp fails on account of being out of disk quota. I ran his reproducer script: # adduser dummy # adduser dummy plugdev # dd if=/dev/zero bs=1M count=100 of=test.img # mkfs.xfs test.img # mount -t xfs -o gquota test.img /mnt # mkdir -p /mnt/dummy # chown -c dummy /mnt/dummy # xfs_quota -xc 'limit -g bsoft=100k bhard=100k plugdev' /mnt (and then as user dummy) $ dd if=/dev/urandom bs=1M count=50 of=/mnt/dummy/foo $ chgrp plugdev /mnt/dummy/foo and saw: ================================================ WARNING: lock held when returning to user space! 5.3.0-rc5 #rc5 Tainted: G W ------------------------------------------------ chgrp/47006 is leaving the kernel with locks still held! 1 lock held by chgrp/47006: #0: 000000006664ea2d (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0xd2/0x290 [xfs] ...which is clearly caused by xfs_setattr_nonsize failing to unlock the ILOCK after the xfs_qm_vop_chown_reserve call fails. Add the missing unlock. Reported-by: benjamin.moody@gmail.com Fixes: 253f4911 ("xfs: better xfs_trans_alloc interface") Signed-off-by:
Salvatore Bonaccorso <carnil@debian.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Henry Burns authored
commit 701d6785 upstream. In zs_destroy_pool() we call flush_work(&pool->free_work). However, we have no guarantee that migration isn't happening in the background at that time. Since migration can't directly free pages, it relies on free_work being scheduled to free the pages. But there's nothing preventing an in-progress migrate from queuing the work *after* zs_unregister_migration() has called flush_work(). Which would mean pages still pointing at the inode when we free it. Since we know at destroy time all objects should be free, no new migrations can come in (since zs_page_isolate() fails for fully-free zspages). This means it is sufficient to track a "# isolated zspages" count by class, and have the destroy logic ensure all such pages have drained before proceeding. Keeping that state under the class spinlock keeps the logic straightforward. In this case a memory leak could lead to an eventual crash if compaction hits the leaked page. This crash would only occur if people are changing their zswap backend at runtime (which eventually starts destruction). Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com Fixes: 48b4800a ("zsmalloc: page migration support") Signed-off-by:
Henry Burns <henryburns@google.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Henry Burns authored
commit 1a87aa03 upstream. In zs_page_migrate() we call putback_zspage() after we have finished migrating all pages in this zspage. However, the return value is ignored. If a zs_free() races in between zs_page_isolate() and zs_page_migrate(), freeing the last object in the zspage, putback_zspage() will leave the page in ZS_EMPTY for potentially an unbounded amount of time. To fix this, we need to do the same thing as zs_page_putback() does: schedule free_work to occur. To avoid duplicated code, move the sequence to a new putback_zspage_deferred() function which both zs_page_migrate() and zs_page_putback() call. Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com Fixes: 48b4800a ("zsmalloc: page migration support") Signed-off-by:
-
Vlastimil Babka authored
commit f7da677b upstream. THP splitting path is missing the split_page_owner() call that split_page() has. As a result, split THP pages are wrongly reported in the page_owner file as order-9 pages. Furthermore when the former head page is freed, the remaining former tail pages are not listed in the page_owner file at all. This patch fixes that by adding the split_page_owner() call into __split_huge_page(). Link: http://lkml.kernel.org/r/20190820131828.22684-2-vbabka@suse.cz Fixes: a9627bc5 ("mm/page_owner: introduce split_page_owner and replace manual handling") Reported-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Kelley authored
commit d0ff14fd upstream. If alloc_descs() fails before irq_sysfs_init() has run, free_desc() in the cleanup path will call kobject_del() even though the kobject has not been added with kobject_add(). Fix this by making the call to kobject_del() conditional on whether irq_sysfs_init() has run. This problem surfaced because commit aa30f47c ("kobject: Add support for default attribute groups to kobj_type") makes kobject_del() stricter about pairing with kobject_add(). If the pairing is incorrrect, a WARNING and backtrace occur in sysfs_remove_group() because there is no parent. [ tglx: Add a comment to the code and make it work with CONFIG_SYSFS=n ] Fixes: ecb3f394 ("genirq: Expose interrupt information through sysfs") Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Dmitry Fomichev authored
commit 75d66ffb upstream. dm-zoned is observed to lock up or livelock in case of hardware failure or some misconfiguration of the backing zoned device. This patch adds a new dm-zoned target function that checks the status of the backing device. If the request queue of the backing device is found to be in dying state or the SCSI backing device enters offline state, the health check code sets a dm-zoned target flag prompting all further incoming I/O to be rejected. In order to detect backing device failures timely, this new function is called in the request mapping path, at the beginning of every reclaim run and before performing any metadata I/O. The proper way out of this situation is to do dmsetup remove <dm-zoned target> and recreate the target when the problem with the backing device is resolved. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Dmitry Fomichev authored
commit d7428c50 upstream. Some errors are ignored in the I/O path during queueing chunks for processing by chunk works. Since at least these errors are transient in nature, it should be possible to retry the failed incoming commands. The fix - Errors that can happen while queueing chunks are carried upwards to the main mapping function and it now returns DM_MAPIO_REQUEUE for any incoming requests that can not be properly queued. Error logging/debug messages are added where needed. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Fomichev authored
commit b234c6d7 upstream. There are several places in reclaim code where errors are not propagated to the main function, dmz_reclaim(). This function is responsible for unlocking zones that might be still locked at the end of any failed reclaim iterations. As the result, some device zones may be left permanently locked for reclaim, degrading target's capability to reclaim zones. This patch fixes these issues as follows - Make sure that dmz_reclaim_buf(), dmz_reclaim_seq_data() and dmz_reclaim_rnd_data() return error codes to the caller. dmz_reclaim() function is renamed to dmz_do_reclaim() to avoid clashing with "struct dmz_reclaim" and is modified to return the error to the caller. dmz_get_zone_for_reclaim() now returns an error instead of NULL pointer and reclaim code checks for that error. Error logging/debug messages are added where necessary. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
commit 1cfd5d33 upstream. If the sector number is too high, dm_table_find_target() should return a pointer to a zeroed dm_target structure (the caller should test it with dm_target_is_valid). However, for some table sizes, the code in dm_table_find_target() that performs btree lookup will access out of bound memory structures. Fix this bug by testing the sector number at the beginning of dm_table_find_target(). Also, add an "inline" keyword to the function dm_table_get_size() because this is a hot path. Fixes: 512875bd ("dm: table detect io beyond device") Cc: stable@vger.kernel.org Reported-by:
Zhang Tao <kontais@zoho.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
ZhangXiaoxu authored
commit ae148243 upstream. In commit 6096d91a ("dm space map metadata: fix occasional leak of a metadata block on resize"), we refactor the commit logic to a new function 'apply_bops'. But when that logic was replaced in out() the return value was not stored. This may lead out() returning a wrong value to the caller. Fixes: 6096d91a ("dm space map metadata: fix occasional leak of a metadata block on resize") Cc: stable@vger.kernel.org Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Wenwen Wang authored
commit dc1a3e8e upstream. If rs_prepare_reshape() fails, no cleanup is executed, leading to leak of the raid_set structure allocated at the beginning of raid_ctr(). To fix this issue, go to the label 'bad' if the error occurs. Fixes: 11e47232 ("dm raid: stop keeping raid set frozen altogether") Cc: stable@vger.kernel.org Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Mikulas Patocka authored
commit 5729b6e5 upstream. Fix a crash that was introduced by the commit 724376a0. The crash is reported here: https://gitlab.com/cryptsetup/cryptsetup/issues/468 When reading from the integrity device, the function dm_integrity_map_continue calls find_journal_node to find out if the location to read is present in the journal. Then, it calculates how many sectors are consecutively stored in the journal. Then, it locks the range with add_new_range and wait_and_add_new_range. The problem is that during wait_and_add_new_range, we hold no locks (we don't hold ic->endio_wait.lock and we don't hold a range lock), so the journal may change arbitrarily while wait_and_add_new_range sleeps. The code then goes to __journal_read_write and hits BUG_ON(journal_entry_get_sector(je) != logical_sector); because the journal has changed. In order to fix this bug, we need to re-check the journal location after wait_and_add_new_range. We restrict the length to one block in order to not complicate the code too much. Fixes: 724376a0 ("dm integrity: implement fair range locks") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
ZhangXiaoxu authored
commit e4f9d601 upstream. When btree_split_beneath() splits a node to two new children, it will allocate two blocks: left and right. If right block's allocation failed, the left block will be unlocked and marked dirty. If this happened, the left block'ss content is zero, because it wasn't initialized with the btree struct before the attempot to allocate the right block. Upon return, when flushing the left block to disk, the validator will fail when check this block. Then a BUG_ON is raised. Fix this by completely initializing the left block before allocating and initializing the right block. Fixes: 4dcb8b57 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path") Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Fomichev authored
commit d1fef414 upstream. This patch fixes a problem in dm-kcopyd that may leave jobs in complete queue indefinitely in the event of backing storage failure. This behavior has been observed while running 100% write file fio workload against an XFS volume created on top of a dm-zoned target device. If the underlying storage of dm-zoned goes to offline state under I/O, kcopyd sometimes never issues the end copy callback and dm-zoned reclaim work hangs indefinitely waiting for that completion. This behavior was traced down to the error handling code in process_jobs() function that places the failed job to complete_jobs queue, but doesn't wake up the job handler. In case of backing device failure, all outstanding jobs may end up going to complete_jobs queue via this code path and then stay there forever because there are no more successful I/O jobs to wake up the job handler. This patch adds a wake() call to always wake up kcopyd job wait queue for all I/O jobs that fail before dm_io() gets called for that job. The patch also sets the write error status in all sub jobs that are failed because their master job has failed. Fixes: b73c67c2 ("dm kcopyd: add sequential write feature") Cc: stable@vger.kernel.org Signed-off-by:
-
John Hubbard authored
commit 7846f58f upstream. commit a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") had two errors: * It preserved boot_params.acpi_rsdp_addr, and * It failed to preserve boot_params.hdr Therefore, zero out acpi_rsdp_addr, and preserve hdr. Fixes: a90118c4 ("x86/boot: Save fields explicitly, zero out everything else") Reported-by:
Neil MacLeod <neil@nmacleod.com> Suggested-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
John Hubbard authored
commit a90118c4 upstream. Recent gcc compilers (gcc 9.1) generate warnings about an out of bounds memset, if the memset goes accross several fields of a struct. This generated a couple of warnings on x86_64 builds in sanitize_boot_params(). Fix this by explicitly saving the fields in struct boot_params that are intended to be preserved, and zeroing all the rest. [ tglx: Tagged for stable as it breaks the warning free build there as well ] Suggested-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Tom Lendacky authored
commit c49a0a80 upstream. There have been reports of RDRAND issues after resuming from suspend on some AMD family 15h and family 16h systems. This issue stems from a BIOS not performing the proper steps during resume to ensure RDRAND continues to function properly. RDRAND support is indicated by CPUID Fn00000001_ECX[30]. This bit can be reset by clearing MSR C001_1004[62]. Any software that checks for RDRAND support using CPUID, including the kernel, will believe that RDRAND is not supported. Update the CPU initialization to clear the RDRAND CPUID bit for any family 15h and 16h processor that supports RDRAND. If it is known that the family 15h or family 16h system does not have an RDRAND resume issue or that the system will not be placed in suspend, the "rdrand=force" kernel parameter can be used to stop the clearing of the RDRAND CPUID bit. Additionally, update the suspend and resume path to save and restore the MSR C001_1004 value to ensure that the RDRAND CPUID setting remains in place after resuming from suspend. Note, that clearing the RDRAND CPUID bit does not prevent a processor that normally supports the RDRAND instruction from executing it. So any code that determined the support based on family and model won't #UD. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chen Yu <yu.c.chen@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org> Cc: "linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "x86@kernel.org" <x86@kernel.org> Link: https://lkml.kernel.org/r/7543af91666f491547bd86cebb1e17c66824ab9f.1566229943.git.thomas.lendacky@amd.comSigned-off-by:
-
Thomas Gleixner authored
commit f897e60a upstream. Some newer machines do not advertise legacy timers. The kernel can handle that situation if the TSC and the CPU frequency are enumerated by CPUID or MSRs and the CPU supports TSC deadline timer. If the CPU does not support TSC deadline timer the local APIC timer frequency has to be known as well. Some Ryzens machines do not advertize legacy timers, but there is no reliable way to determine the bus frequency which feeds the local APIC timer when the machine allows overclocking of that frequency. As there is no legacy timer the local APIC timer calibration crashes due to a NULL pointer dereference when accessing the not installed global clock event device. Switch the calibration loop to a non interrupt based one, which polls either TSC (if frequency is known) or jiffies. The latter requires a global clockevent. As the machines which do not have a global clockevent installed have a known TSC frequency this is a non issue. For older machines where TSC frequency is not known, there is no known case where the legacy timers do not exist as that would have been reported long ago. Reported-by:
Daniel Drake <drake@endlessm.com> Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Sean Christopherson authored
commit b63f20a7 upstream. Use 'lea' instead of 'add' when adjusting %rsp in CALL_NOSPEC so as to avoid clobbering flags. KVM's emulator makes indirect calls into a jump table of sorts, where the destination of the CALL_NOSPEC is a small blob of code that performs fast emulation by executing the target instruction with fixed operands. adcb_al_dl: 0x000339f8 <+0>: adc %dl,%al 0x000339fa <+2>: ret A major motiviation for doing fast emulation is to leverage the CPU to handle consumption and manipulation of arithmetic flags, i.e. RFLAGS is both an input and output to the target of CALL_NOSPEC. Clobbering flags results in all sorts of incorrect emulation, e.g. Jcc instructions often take the wrong path. Sans the nops... asm("push %[flags]; popf; " CALL_NOSPEC " ; pushf; pop %[flags]\n" 0x0003595a <+58>: mov 0xc0(%ebx),%eax 0x00035960 <+64>: mov 0x60(%ebx),%edx 0x00035963 <+67>: mov 0x90(%ebx),%ecx 0x00035969 <+73>: push %edi 0x0003596a <+74>: popf 0x0003596b <+75>: call *%esi 0x000359a0 <+128>: pushf 0x000359a1 <+129>: pop %edi 0x000359a2 <+130>: mov %eax,0xc0(%ebx) 0x000359b1 <+145>: mov %edx,0x60(%ebx) ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK); 0x000359a8 <+136>: mov -0x10(%ebp),%eax 0x000359ab <+139>: and $0x8d5,%edi 0x000359b4 <+148>: and $0xfffff72a,%eax 0x000359b9 <+153>: or %eax,%edi 0x000359bd <+157>: mov %edi,0x4(%ebx) For the most part this has gone unnoticed as emulation of guest code that can trigger fast emulation is effectively limited to MMIO when running on modern hardware, and MMIO is rarely, if ever, accessed by instructions that affect or consume flags. Breakage is almost instantaneous when running with unrestricted guest disabled, in which case KVM must emulate all instructions when the guest has invalid state, e.g. when the guest is in Big Real Mode during early BIOS. Fixes: 776b043848fd2 ("x86/retpoline: Add initial retpoline support") Fixes: 1a29b5b7 ("KVM: x86: Make indirect calls in emulator speculation safe") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190822211122.27579-1-sean.j.christopherson@intel.comSigned-off-by:
-
Oleg Nesterov authored
commit 46d0b24c upstream. userfaultfd_release() should clear vm_flags/vm_userfaultfd_ctx even if mm->core_state != NULL. Otherwise a page fault can see userfaultfd_missing() == T and use an already freed userfaultfd_ctx. Link: http://lkml.kernel.org/r/20190820160237.GB4983@redhat.com Fixes: 04f5866e ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping") Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Tested-by:
-
Dexuan Cui authored
commit a9fc4340 upstream. In the case of X86_PAE, unsigned long is u32, but the physical address type should be u64. Due to the bug here, the netvsc driver can not load successfully, and sometimes the VM can panic due to memory corruption (the hypervisor writes data to the wrong location). Fixes: 6ba34171 ("Drivers: hv: vmbus: Remove use of slow_virt_to_phys()") Cc: stable@vger.kernel.org Cc: Michael Kelley <mikelley@microsoft.com> Reported-and-tested-by:
Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
-
Bartosz Golaszewski authored
commit 2c60e6b5 upstream. If the driver doesn't support open-drain/source config options, we emulate this behavior when setting the direction by calling gpiod_direction_input() if the default value is 0 (open-source) or 1 (open-drain), thus not actively driving the line in those cases. This however clears the FLAG_IS_OUT bit for the GPIO line descriptor and makes the LINEINFO ioctl() incorrectly report this line's mode as 'input' to user-space. This commit modifies the ioctl() to always set the GPIOLINE_FLAG_IS_OUT bit in the lineinfo structure's flags field. Since it's impossible to use the input mode and open-drain/source options at the same time, we can be sure the reported information will be correct. Fixes: 521a2ad6 ("gpio: add userspace ABI for GPIO line information") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20190806114151.17652-1-brgl@bgdev.plSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Lyude Paul authored
commit c358ebf5 upstream. While I had thought I had fixed this issue in: commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") It turns out that while I did fix the error messages I was seeing on my P50 when trying to access i2c busses with the GPU in runtime suspend, I accidentally had missed one important detail that was mentioned on the bug report this commit was supposed to fix: that the CPU would only lock up when trying to access i2c busses _on connected devices_ _while the GPU is not in runtime suspend_. Whoops. That definitely explains why I was not able to get my machine to hang with i2c bus interactions until now, as plugging my P50 into it's dock with an HDMI monitor connected allowed me to finally reproduce this locally. Now that I have managed to reproduce this issue properly, it looks like the problem is much simpler then it looks. It turns out that some connected devices, such as MST laptop docks, will actually ACK i2c reads even if no data was actually read: [ 275.063043] nouveau 0000:01:00.0: i2c: aux 000a: 1: 0000004c 1 [ 275.063447] nouveau 0000:01:00.0: i2c: aux 000a: 00 01101000 10040000 [ 275.063759] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000001 [ 275.064024] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 [ 275.064285] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 [ 275.064594] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 Because we don't handle the situation of i2c ack without any data, we end up entering an infinite loop in nvkm_i2c_aux_i2c_xfer() since the value of cnt always remains at 0. This finally properly explains how this could result in a CPU hang like the ones observed in the aforementioned commit. So, fix this by retrying transactions if no data is written or received, and give up and fail the transaction if we continue to not write or receive any data after 32 retries. Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit a5613724 upstream. We can't rely on ->peer_features in calc_target() because it may be called both when the OSD session is established and open and when it's not. ->peer_features is not valid unless the OSD session is open. If this happens on a PG split (pg_num increase), that could mean we don't resend a request that should have been resent, hanging the client indefinitely. In userspace this was fixed by looking at require_osd_release and get_xinfo[osd].features fields of the osdmap. However these fields belong to the OSD section of the osdmap, which the kernel doesn't decode (only the client section is decoded). Instead, let's drop this feature check. It effectively checks for luminous, so only pre-luminous OSDs would be affected in that on a PG split the kernel might resend a request that should not have been resent. Duplicates can occur in other scenarios, so both sides should already be prepared for them: see dup/replay logic on the OSD side and retry_attempt check on the client side. Cc: stable@vger.kernel.org Fixes: 7de030d6 ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT") Link: https://tracker.ceph.com/issues/41162Reported-by:
Jerry Lee <leisurelysw24@gmail.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Tested-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Jeff Layton authored
commit 28a28261 upstream. When ceph_mdsc_do_request returns an error, we can't assume that the filelock_reply pointer will be set. Only try to fetch fields out of the r_reply_info when it returns success. Cc: stable@vger.kernel.org Reported-by:
Hector Martin <hector@marcansoft.com> Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
-
Erqi Chen authored
commit c95f1c5f upstream. clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage(). invalidatepage() clears page's private flag, if dirty flag is not cleared, the page may cause BUG_ON failure in ceph_set_page_dirty(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/40862Signed-off-by:
Erqi Chen <chenerqi@gmail.com> Reviewed-by:
-
Dinh Nguyen authored
commit c7ec75ea upstream. Checking bypass_reg is incorrect for calculating the cnt_clk rates. Instead we should be checking that there is a proper hardware register that holds the clock divider. Cc: stable@vger.kernel.org Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Link: https://lkml.kernel.org/r/20190814153014.12962-1-dinguyen@kernel.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Mikulas Patocka authored
commit cf3591ef upstream. Revert the commit bd293d07. The proper fix has been made available with commit d0a255e7 ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d07 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by:
-
Jason Gerecke authored
commit b72fb1dc upstream. Distance values reported by 2nd-gen Intuos tablets are on an inverted scale (0 == far, 63 == near). We need to change them over to a normal scale before reporting to userspace or else userspace drivers and applications can get confused. Ref: https://github.com/linuxwacom/input-wacom/issues/98 Fixes: eda01dab ("HID: wacom: Add four new Intuos devices") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Aaron Armstrong Skomra authored
commit fcf887e7 upstream. The EKR ring claims a range of 0 to 71 but actually reports values 1 to 72. The ring is used in relative mode so this change should not affect users. Signed-off-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Fixes: 72b236d6 ("HID: wacom: Add support for Express Key Remote.") Cc: <stable@vger.kernel.org> # v4.3+ Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Reviewed-by:
-
Naresh Kamboju authored
[ Upstream commit c096397c ] selftests kvm test cases need pre-required kernel configs for the test to get pass. Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit c69509c7 ] At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 03fdfb26 ] At the moment, the way we reset system registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a system register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. This requires fixing a couple of sysreg refinition in the trap table. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the sysregs leave outside of the sys_regs[] array). It may well be axed in the near future. Tested-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Jin Yao authored
[ Upstream commit 8e6e5bea ] The events defined in pmu-events JSON are parsed and added into perf tool. For fixed counters, we handle the encodings between JSON and perf by using a static array fixed[]. But the fixed[] has missed an important event "cpu_clk_unhalted.core". For example, on the Tremont platform, [root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a event syntax error: 'cpu_clk_unhalted.core' \___ parser error With this patch, the event cpu_clk_unhalted.core can be parsed. [root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv ------------------------------------------------------------ perf_event_attr: type 4 size 112 config 0x3c sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ ... Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190729072755.2166-1-yao.jin@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
He Zhe authored
[ Upstream commit 5f5e25f1 ] cpu_map__snprint_mask() would write to illegal memory pointed by zalloc(0) when there is only one cpu. This patch fixes the calculation and adds sanity check against the input parameters. Signed-off-by:
He Zhe <zhe.he@windriver.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Fixes: 4400ac8a ("perf cpumap: Introduce cpu_map__snprint_mask()") Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.comSigned-off-by:
-
He Zhe authored
[ Upstream commit cf30ae72 ] The buffer containing the string used to set cpumask is overwritten at the end of the string later in cpu_map__snprint_mask due to not enough memory space, when there is only one cpu. And thus causes the following failure: $ perf ftrace ls failed to reset ftrace $ This patch fixes the calculation of the cpumask string size. Signed-off-by:
-
Paolo Valente authored
[ Upstream commit fd03177c ] As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Hsin-Yi Wang <hsinyi@google.com> Reviewed-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
