- 13 Feb, 2018 14 commits
-
-
Josh Poimboeuf authored
With the following commit: f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros") ... one of my suggested improvements triggered a frame pointer warning: arch/x86/entry/entry_64.o: warning: objtool: paranoid_entry()+0x11: call without frame pointer save/setup The warning is correct for the build-time code, but it's actually not relevant at runtime because of paravirt patching. The paravirt swapgs call gets replaced with either a SWAPGS instruction or NOPs at runtime. Go back to the previous behavior by removing the ELF function annotation for paranoid_entry() and adding an unwind hint, which effectively silences the warning. Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kbuild-all@01.org Cc: tipbuild@zytor.com Fixes: f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros") Link: http://lkml.kernel.org/r/20180212174503.5acbymg5z6p32snu@trebleSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Dominik Brodowski authored
... same as the other macros in arch/x86/entry/calling.h Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dan.j.williams@intel.com Link: http://lkml.kernel.org/r/20180211104949.12992-8-linux@dominikbrodowski.netSigned-off-by:
-
Dominik Brodowski authored
Previously, error_entry() and paranoid_entry() saved the GP registers onto stack space previously allocated by its callers. Combine these two steps in the callers, and use the generic PUSH_AND_CLEAR_REGS macro for that. This adds a significant amount ot text size. However, Ingo Molnar points out that: "these numbers also _very_ significantly over-represent the extra footprint. The assumptions that resulted in us compressing the IRQ entry code have changed very significantly with the new x86 IRQ allocation code we introduced in the last year: - IRQ vectors are usually populated in tightly clustered groups. With our new vector allocator code the typical per CPU allocation percentage on x86 systems is ~3 device vectors and ~10 fixed vectors out of ~220 vectors - i.e. a very low ~6% utilization (!). [...] The days where we allocated a lot of vectors on every CPU and the compression of the IRQ entry code text mattered are over. - Another issue is that only a small minority of vectors is frequent enough to actually matter to cache utilization in practice: 3-4 key IPIs and 1-2 device IRQs at most - and those vectors tend to be tightly clustered as well into about two groups, and are probably already on 2-3 cache lines in practice. For the common case of 'cache cold' IRQs it's the depth of the call chain and the fragmentation of the resulting I$ that should be the main performance limit - not the overall size of it. - The CPU side cost of IRQ delivery is still very expensive even in the best, most cached case, as in 'over a thousand cycles'. So much stuff is done that maybe contemporary x86 IRQ entry microcode already prefetches the IDT entry and its expected call target address."[*] [*] http://lkml.kernel.org/r/20180208094710.qnjixhm6hybebdv7@gmail.com The "testb $3, CS(%rsp)" instruction in the idtentry macro does not need modification. Previously, %rsp was manually decreased by 15*8; with this patch, %rsp is decreased by 15 pushq instructions. [jpoimboe@redhat.com: unwind hint improvements] Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dominik Brodowski authored
entry_SYSCALL_64_after_hwframe() and nmi() can be converted to use PUSH_AND_CLEAN_REGS instead of opencoded variants thereof. Due to the interleaving, the additional XOR-based clearing of R8 and R9 in entry_SYSCALL_64_after_hwframe() should not have any noticeable negative implications. Suggested-by:
-
Dominik Brodowski authored
Those instances where ALLOC_PT_GPREGS_ON_STACK is called just before SAVE_AND_CLEAR_REGS can trivially be replaced by PUSH_AND_CLEAN_REGS. This macro uses PUSH instead of MOV and should therefore be faster, at least on newer CPUs. Suggested-by:
-
Dominik Brodowski authored
Same as is done for syscalls, interleave XOR with PUSH instructions for exceptions/interrupts, in order to minimize the cost of the additional instructions required for register clearing. Signed-off-by:
-
Dominik Brodowski authored
The two special, opencoded cases for POP_C_REGS can be handled by ASM macros. Signed-off-by:
-
Dominik Brodowski authored
All current code paths call SAVE_C_REGS and then immediately SAVE_EXTRA_REGS. Therefore, merge these two macros and order the MOV sequeneces properly. While at it, remove the macros to save all except specific registers, as these macros have been unused for a long time. Suggested-by:
-
Ingo Molnar authored
Harmonize all the Spectre messages so that a: dmesg | grep -i spectre ... gives us most Spectre related kernel boot messages. Also fix a few other details: - clarify a comment about firmware speculation control - s/KPTI/PTI - remove various line-breaks that made the code uglier Acked-by:David Woodhouse <dwmw@amazon.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
KarimAllah Ahmed authored
We either clear the CPU_BASED_USE_MSR_BITMAPS and end up intercepting all MSR accesses or create a valid L02 MSR bitmap and use that. This decision has to be made every time we evaluate whether we are going to generate the L02 MSR bitmap. Before commit: d28b387f ("KVM/VMX: Allow direct access to MSR_IA32_SPEC_CTRL") ... this was probably OK since the decision was always identical. This is no longer the case now since the MSR bitmap might actually change once we decide to not intercept SPEC_CTRL and PRED_CMD. Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan.van.de.ven@intel.com Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: kvm@vger.kernel.org Cc: sironi@amazon.de Link: http://lkml.kernel.org/r/1518305967-31356-6-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
KarimAllah Ahmed authored
These two variables should check whether SPEC_CTRL and PRED_CMD are supposed to be passed through to L2 guests or not. While msr_write_intercepted_l01 would return 'true' if it is not passed through. So just invert the result of msr_write_intercepted_l01 to implement the correct semantics. Signed-off-by:
Jim Mattson <jmattson@google.com> Acked-by:
-
David Woodhouse authored
KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods With retpoline, tight loops of "call this function for every XXX" are very much pessimised by taking a prediction miss *every* time. This one is by far the biggest contributor to the guest launch time with retpoline. By marking the iterator slot_handle_…() functions always_inline, we can ensure that the indirect function call can be optimised away into a direct call and it actually generates slightly smaller code because some of the other conditionals can get optimised away too. Performance is now pretty close to what we see with nospectre_v2 on the command line. Suggested-by:
Filippo Sironi <sironi@amazon.de> Signed-off-by:
-
David Woodhouse authored
This reverts commit 64e16720. We cannot call C functions like that, without marking all the call-clobbered registers as, well, clobbered. We might have got away with it for now because the __ibp_barrier() function was *fairly* unlikely to actually use any other registers. But no. Just no. Signed-off-by:
-
David Woodhouse authored
Arjan points out that the Intel document only clears the 0xc2 microcode on *some* parts with CPUID 506E3 (INTEL_FAM6_SKYLAKE_DESKTOP stepping 3). For the Skylake H/S platform it's OK but for Skylake E3 which has the same CPUID it isn't (yet) cleared. So removing it from the blacklist was premature. Put it back for now. Also, Arjan assures me that the 0x84 microcode for Kaby Lake which was featured in one of the early revisions of the Intel document was never released to the public, and won't be until/unless it is also validated as safe. So those can change to 0x80 which is what all *other* versions of the doc have identified. Once the retrospective testing of existing public microcodes is done, we should be back into a mode where new microcodes are only released in batches and we shouldn't even need to update the blacklist for those anyway, so this tweaking of the list isn't expected to be a thing which keeps happening. Requested-by:
Arjan van de Ven <arjan.van.de.ven@intel.com> Signed-off-by:
-
- 11 Feb, 2018 1 commit
-
-
David Woodhouse authored
Intel have retroactively blessed the 0xc2 microcode on Skylake mobile and desktop parts, and the Gemini Lake 0x22 microcode is apparently fine too. We blacklisted the latter purely because it was present with all the other problematic ones in the 2018-01-08 release, but now it's explicitly listed as OK. We still list 0x84 for the various Kaby Lake / Coffee Lake parts, as that appeared in one version of the blacklist and then reverted to 0x80 again. We can change it if 0x84 is actually announced to be safe. Signed-off-by:
-
- 10 Feb, 2018 1 commit
-
-
Nadav Amit authored
The comment is confusing since the path is taken when CONFIG_PAGE_TABLE_ISOLATION=y is disabled (while the comment says it is not taken). Signed-off-by:
Nadav Amit <namit@vmware.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: nadav.amit@gmail.com Link: http://lkml.kernel.org/r/20180209170638.15161-1-namit@vmware.comSigned-off-by:
-
- 09 Feb, 2018 2 commits
-
-
Peter Zijlstra authored
Since Josh keeps asking, add myself to MAINTAINERS. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
-
Peter Zijlstra authored
Linus reported that GCC-7.3 generated a switch-table construct that confused objtool. It turns out that, in particular due to KASAN, it is possible to have unrelated .rodata usage in between the .rodata setup for the switch-table and the following indirect jump. The simple linear reverse search from the indirect jump would hit upon the KASAN .rodata usage first and fail to find a switch_table, resulting in a spurious 'sibling call with modified stack frame' warning. Fix this by creating a 'jump-stack' which we can 'unwind' during reversal, thereby skipping over much of the in-between code. This is not fool proof by any means, but is sufficient to make the known cases work. Future work would be to construct more comprehensive flow analysis code. Reported-and-tested-by:
-
- 06 Feb, 2018 3 commits
-
-
Dan Williams authored
At entry userspace may have populated registers with values that could otherwise be useful in a speculative execution attack. Clear them to minimize the kernel's attack surface. Originally-From: Andi Kleen <ak@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/151787989697.7847.4083702787288600552.stgit@dwillia2-desk3.amr.corp.intel.com [ Made small improvements to the changelog. ] Signed-off-by:
-
Dan Williams authored
Clear the 'extra' registers on entering the 64-bit kernel for exceptions and interrupts. The common registers are not cleared since they are likely clobbered well before they can be exploited in a speculative execution attack. Originally-From: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Dan Williams authored
At entry userspace may have (maliciously) populated the extra registers outside the syscall calling convention with arbitrary values that could be useful in a speculative execution (Spectre style) attack. Clear these registers to minimize the kernel's attack surface. Note, this only clears the extra registers and not the unused registers for syscalls less than 6 arguments, since those registers are likely to be clobbered well before their values could be put to use under speculation. Note, Linus found that the XOR instructions can be executed with minimized cost if interleaved with the PUSH instructions, and Ingo's analysis found that R10 and R11 should be included in the register clearing beyond the typical 'extra' syscall calling convention registers. Suggested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
- 03 Feb, 2018 6 commits
-
-
KarimAllah Ahmed authored
[ Based on a patch from Paolo Bonzini <pbonzini@redhat.com> ] ... basically doing exactly what we do for VMX: - Passthrough SPEC_CTRL to guests (if enabled in guest CPUID) - Save and restore SPEC_CTRL around VMExit and VMEntry only if the guest actually used it. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Darren Kenny <darren.kenny@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: kvm@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lkml.kernel.org/r/1517669783-20732-1-git-send-email-karahmed@amazon.de
-
KarimAllah Ahmed authored
[ Based on a patch from Ashok Raj <ashok.raj@intel.com> ] Add direct access to MSR_IA32_SPEC_CTRL for guests. This is needed for guests that will only mitigate Spectre V2 through IBRS+IBPB and will not be using a retpoline+IBPB based approach. To avoid the overhead of saving and restoring the MSR_IA32_SPEC_CTRL for guests that do not actually use the MSR, only start saving and restoring when a non-zero is written to it. No attempt is made to handle STIBP here, intentionally. Filtering STIBP may be added in a future patch, which may require trapping all writes if we don't want to pass it through directly to the guest. [dwmw2: Clean up CPUID bits, save/restore manually, handle reset] Signed-off-by:
-
KarimAllah Ahmed authored
Intel processors use MSR_IA32_ARCH_CAPABILITIES MSR to indicate RDCL_NO (bit 0) and IBRS_ALL (bit 1). This is a read-only MSR. By default the contents will come directly from the hardware, but user-space can still override it. [dwmw2: The bit in kvm_cpuid_7_0_edx_x86_features can be unconditional] Signed-off-by:
-
Ashok Raj authored
The Indirect Branch Predictor Barrier (IBPB) is an indirect branch control mechanism. It keeps earlier branches from influencing later ones. Unlike IBRS and STIBP, IBPB does not define a new mode of operation. It's a command that ensures predicted branch targets aren't used after the barrier. Although IBRS and IBPB are enumerated by the same CPUID enumeration, IBPB is very different. IBPB helps mitigate against three potential attacks: * Mitigate guests from being attacked by other guests. - This is addressed by issing IBPB when we do a guest switch. * Mitigate attacks from guest/ring3->host/ring3. These would require a IBPB during context switch in host, or after VMEXIT. The host process has two ways to mitigate - Either it can be compiled with retpoline - If its going through context switch, and has set !dumpable then there is a IBPB in that path. (Tim's patch: https://patchwork.kernel.org/patch/10192871) - The case where after a VMEXIT you return back to Qemu might make Qemu attackable from guest when Qemu isn't compiled with retpoline. There are issues reported when doing IBPB on every VMEXIT that resulted in some tsc calibration woes in guest. * Mitigate guest/ring0->host/ring0 attacks. When host kernel is using retpoline it is safe against these attacks. If host kernel isn't using retpoline we might need to do a IBPB flush on every VMEXIT. Even when using retpoline for indirect calls, in certain conditions 'ret' can use the BTB on Skylake-era CPUs. There are other mitigations available like RSB stuffing/clearing. * IBPB is issued only for SVM during svm_free_vcpu(). VMX has a vmclear and SVM doesn't. Follow discussion here: https://lkml.org/lkml/2018/1/15/146 Please refer to the following spec for more details on the enumeration and control. Refer here to get documentation about mitigations. https://software.intel.com/en-us/side-channel-security-support [peterz: rebase and changelog rewrite] [karahmed: - rebase - vmx: expose PRED_CMD if guest has it in CPUID - svm: only pass through IBPB if guest has it in CPUID - vmx: support !cpu_has_vmx_msr_bitmap()] - vmx: support nested] [dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS) PRED_CMD is a write-only MSR] Signed-off-by:Ashok Raj <ashok.raj@intel.com> Signed-off-by:
-
KarimAllah Ahmed authored
[dwmw2: Stop using KF() for bits in it, too] Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmThomas Gleixner authored
Pull the KVM prerequisites so the IBPB patches apply.
-
- 02 Feb, 2018 4 commits
-
-
Darren Kenny authored
Fixes: 117cc7a9 ("x86/retpoline: Fill return stack buffer on vmexit") Signed-off-by:
-
Arnd Bergmann authored
I'm seeing build failures from the two newly introduced arrays that are marked 'const' and '__initdata', which are mutually exclusive: arch/x86/kernel/cpu/common.c:882:43: error: 'cpu_no_speculation' causes a section type conflict with 'e820_table_firmware_init' arch/x86/kernel/cpu/common.c:895:43: error: 'cpu_no_meltdown' causes a section type conflict with 'e820_table_firmware_init' The correct annotation is __initconst. Fixes: fec9434a ("x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
KarimAllah Ahmed authored
[dwmw2: Use ARRAY_SIZE] Signed-off-by:
-
David Woodhouse authored
There's no point in building init code with retpolines, since it runs before any potentially hostile userspace does. And before the retpoline is actually ALTERNATIVEd into place, for much of it. Signed-off-by:
-
- 01 Feb, 2018 1 commit
-
-
Dan Williams authored
Commit 75f139aa "KVM: x86: Add memory barrier on vmcs field lookup" added a raw 'asm("lfence");' to prevent a bounds check bypass of 'vmcs_field_to_offset_table'. The lfence can be avoided in this path by using the array_index_nospec() helper designed for these types of fixes. Signed-off-by:
-
- 31 Jan, 2018 2 commits
-
-
Paolo Bonzini authored
Place the MSR bitmap in struct loaded_vmcs, and update it in place every time the x2apic or APICv state can change. This is rare and the loop can handle 64 MSRs per iteration, in a similar fashion as nested_vmx_prepare_msr_bitmap. This prepares for choosing, on a per-VM basis, whether to intercept the SPEC_CTRL and PRED_CMD MSRs. Cc: stable@vger.kernel.org # prereq for Spectre mitigation Suggested-by:
-
Josh Poimboeuf authored
The 'noreplace-paravirt' option disables paravirt patching, leaving the original pv indirect calls in place. That's highly incompatible with retpolines, unless we want to uglify paravirt even further and convert the paravirt calls to retpolines. As far as I can tell, the option doesn't seem to be useful for much other than introducing surprising corner cases and making the kernel vulnerable to Spectre v2. It was probably a debug option from the early paravirt days. So just remove it. Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jason Baron <jbaron@akamai.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lkml.kernel.org/r/20180131041333.2x6blhxirc2kclrq@treble
-
- 30 Jan, 2018 6 commits
-
-
Tim Chen authored
Flush indirect branches when switching into a process that marked itself non dumpable. This protects high value processes like gpg better, without having too high performance overhead. If done naïvely, we could switch to a kernel idle thread and then back to the original process, such as: process A -> idle -> process A In such scenario, we do not have to do IBPB here even though the process is non-dumpable, as we are switching back to the same process after a hiatus. To avoid the redundant IBPB, which is expensive, we track the last mm user context ID. The cost is to have an extra u64 mm context id to track the last mm we were using before switching to the init_mm used by idle. Avoiding the extra IBPB is probably worth the extra memory for this common scenario. For those cases where tlb_defer_switch_to_init_mm() returns true (non PCID), lazy tlb will defer switch to init_mm, so we will not be changing the mm for the process A -> idle -> process A switch. So IBPB will be skipped for this case. Thanks to the reviewers and Andy Lutomirski for the suggestion of using ctx_id which got rid of the problem of mm pointer recycling. Signed-off-by:Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
David Woodhouse authored
Despite the fact that all the other code there seems to be doing it, just using set_cpu_cap() in early_intel_init() doesn't actually work. For CPUs with PKU support, setup_pku() calls get_cpu_cap() after c->c_init() has set those feature bits. That resets those bits back to what was queried from the hardware. Turning the bits off for bad microcode is easy to fix. That can just use setup_clear_cpu_cap() to force them off for all CPUs. I was less keen on forcing the feature bits *on* that way, just in case of inconsistencies. I appreciate that the kernel is going to get this utterly wrong if CPU features are not consistent, because it has already applied alternatives by the time secondary CPUs are brought up. But at least if setup_force_cpu_cap() isn't being used, we might have a chance of *detecting* the lack of the corresponding bit and either panicking or refusing to bring the offending CPU online. So ensure that the appropriate feature bits are set within get_cpu_cap() regardless of how many extra times it's called. Fixes: 2961298e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags") Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_err error message text. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dan Williams authored
Reflect the presence of get_user(), __get_user(), and 'syscall' protections in sysfs. The expectation is that new and better tooling will allow the kernel to grow more usages of array_index_nospec(), for now, only claim mitigation for __user pointer de-references. Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Dan Williams authored
Wireless drivers rely on parse_txq_params to validate that txq_params->ac is less than NL80211_NUM_ACS by the time the low-level driver's ->conf_tx() handler is called. Use a new helper, array_index_nospec(), to sanitize txq_params->ac with respect to speculation. I.e. ensure that any speculation into ->conf_tx() handlers is done with a value of txq_params->ac that is within the bounds of [0, NL80211_NUM_ACS). Reported-by:
Christian Lamparter <chunkeey@gmail.com> Reported-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Cc: linux-arch@vger.kernel.org Cc: kernel-hardening@lists.openwall.com Cc: gregkh@linuxfoundation.org Cc: linux-wireless@vger.kernel.org Cc: torvalds@linux-foundation.org Cc: "David S. Miller" <davem@davemloft.net> Cc: alan@linux.intel.com Link: https://lkml.kernel.org/r/151727419584.33451.7700736761686184303.stgit@dwillia2-desk3.amr.corp.intel.com
-
Dan Williams authored
'fd' is a user controlled value that is used as a data dependency to read from the 'fdt->fd' array. In order to avoid potential leaks of kernel memory values, block speculative execution of the instruction stream that could issue reads based on an invalid 'file *' returned from __fcheck_files. Co-developed-by:
-
