- 13 May, 2016 3 commits
-
-
Alban Bedel authored
Reuse the early printk code to support the serial in zboot. We copy early_printk.c instead of referencing it because we need to build a different object file for the normal kernel and zboot. Signed-off-by:
Alban Bedel <albeu@free.fr> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12234/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Alban Bedel authored
Now that appended DTB is usable we can drop the builtin DTB support. Signed-off-by:
-
Alban Bedel authored
This is needed for bootloader supporting UHI and to support appended DTB. Signed-off-by:
-
- 09 May, 2016 31 commits
-
-
James Hogan authored
A couple of netlogic assembly files define CP0_EBASE to $15, the same as CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and CP0_EBase registers. However commit 609cf6f2 ("MIPS: CPS: Early debug using an ns16550-compatible UART") added a different definition of CP0_EBASE to mipsregs.h, which included a register select of 1. This causes harmless build warnings like the following: arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined #define CP0_EBASE $15 ^ In file included from arch/mips/netlogic/common/reset.S:41:0: ./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition #define CP0_EBASE $15, 1 ^ Update the code to use the definitions from mipsregs.h for accessing both registers. Fixes: 609cf6f2 ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13183/Signed-off-by:
-
Joshua Kinard authored
Update the recent changes to set_pte() that were added in 46011e6e to handle R10000_LLSC_WAR, and format the assembly to match other areas of the MIPS tree using the same WAR. This also incorporates a patch recently sent in my Markos Chandras, "Remove local LL/SC preprocessor variants", so that patch doesn't need to be applied if this one is accepted. Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Fixes: 46011e6e ("MIPS: Make set_pte() SMP safe.) Cc: David Daney <david.daney@cavium.com> Cc: Linux/MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/11103/Signed-off-by:
-
Ralf Baechle authored
Inspired by Markos Chandras' patch. I just didn't want do pull bitsops.h into pgtable.h. Signed-off-by:
-
James Hogan authored
Building an MSA capable kernel with a toolchain that supports MSA produces warnings such as this: arch/mips/kernel/r4k_fpu.S:229: Warning: the `msa' extension requires 64-bit FPRs This is due to ".set msa" without ".set fp=64" in the non doubleword MSA load/store macros, since MSA requires the 64-bit FPU registers (FR=1). Add the missing fp=64 in these macros to silence the warnings. Signed-off-by:
-
James Hogan authored
When lockdep is enabled on a 64-bit kernel the FPR offset into the thread structure exceeds the maximum range of the MSA ld.d/st.d instructions. For example THREAD_FPR31 = 4644 (instead of 2448), while the signed immediate field is only 10 bits with an implicit multiply by 8, giving a maximum offset of 511*8 = 4088. This isn't a problem when the toolchain doesn't support MSA as the ld_*/st_* macros perform the addition separately into $1 with [d]addui which has a 16bit signed immediate field. Fix the case where the toolchain does support MSA by doing a single addition of THREAD_FPR0 into $1 with [d]addui, and doing the ld_*/st_* relative to that. Signed-off-by:
-
James Hogan authored
The MSA ld_*/st_* assembler macros for when the toolchain doesn't support MSA use addu to offset the base address. However it is a virtual memory pointer so fix it to use PTR_ADDU which expands to daddu for 64-bit kernels. Signed-off-by:
-
Paul Burton authored
In revision 1.12 of the MSA specification, the copy_u.w instruction has been removed for MIPS32 & the copy_u.d instruction has been removed for MIPS64. Newer toolchains (eg. Codescape SDK essentials 2015.10) will complain about this like so: arch/mips/kernel/r4k_fpu.S:290: Error: opcode not supported on this processor: mips32r2 (mips32r2) `copy_u.w $1,$w26[3]' Since we always copy to the width of a GPR, simply use copy_s instead of copy_u to fix this. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Maciej W. Rozycki authored
This complements commit 8c56208a ("MIPS: lib: memset: Add MIPS R6 support"). Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12452/Signed-off-by:
-
Leonid Yegoshin authored
Error recovery pointers for fixups was improperly set as ".word" which is unsuitable for MIPS64. Replaced by STR(PTR) [ralf@linux-mips.org: Apply changes as requested in the review process.] Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: b0a668fb ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Cc: macro@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/9911/Signed-off-by:
-
Matt Redfearn authored
This patch ensures that the dev parameter is checked for NULL before it is dereferenced in massage_gfp_flags. If dev is NULL, then fall back setting the GFP flag requested and available. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11919/Signed-off-by:
-
Yanjiang Jin authored
Use boot_cpu_type() instead of current_cpu_type() in oprofile_arch_init() to avoid the below warning, cpu_type is normally consistent in a MIPS SMP system. There are a few exceptions such as SGI servers where it is possible to mix R10000, R12000, R14000 and R16000 within certain constraints. Let's not worry about those now. BUG: using smp_processor_id() in preemptible [00000000] code: insmod/952 caller is oprofile_arch_init+0x30/0x194 [oprofile] CPU: 5 PID: 952 Comm: insmod Not tainted 4.1.13-WR8.0.0.0_standard #1 Stack : ffffffff80c10000 0000000000000001 8000000025bf0790 ffffffff80e10000 ffffffff80e50000 ffffffff80254e2c ffffffff80b64428 ffffffff80e10790 0000000000000000 ffffffff801caeb8 0000000000000045 0000000000000005 ffffffff80c10000 ffffffff801cb798 0000000000000000 ffffffff80e30000 0000000000000000 ffffffff801ff1c0 ffffffff80e2d2f8 000000000000000b ffffffff801cbba0 ffffffff80e107b0 ffffffff80a77828 0000000000000005 00000000000003b8 ffffffff80e2d2f8 800000040ad39960 ffffffff801f9950 0000000000000124 80000004093b7990 80000004093b7ab8 ffffffff80925108 ffffffff80b69a07 ffffffff80a6f0d0 8000000407240e00 ffffffff801cc934 000000000000005d ffffffff80159080 0000000000000005 00000000000003b8 ... Call Trace: [<ffffffff80159080>] show_stack+0xe8/0x108 [<ffffffff80925108>] dump_stack+0x8c/0xd8 [<ffffffff80606570>] check_preemption_disabled+0x110/0x118 [<ffffffffc0086104>] oprofile_arch_init+0x30/0x194 [oprofile] [<ffffffffc008602c>] oprofile_init+0x2c/0xc0 [oprofile] [<ffffffff80100550>] do_one_initcall+0xa0/0x1c0 [<ffffffff80921e04>] do_init_module+0x80/0x1d8 [<ffffffff801fd0d4>] load_module+0x1b74/0x2278 [<ffffffff801fdab4>] SyS_finit_module+0xcc/0xf0 [<ffffffff80165884>] handle_sysn32+0x44/0x70 [ralf@linux-mips.org: Correct commit message.] Signed-off-by:
Yanjiang Jin <yanjiang.jin@windriver.com> Cc: rric@kernel.org Cc: jinyanjiang@gmail.com Cc: linux-mips@linux-mips.org Cc: oprofile-list@lists.sf.net Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11769/Signed-off-by:
-
Huacai Chen authored
Commit d5ece1cb ("Fix ld-version.sh to handle large 3rd version part") modifies the ld version description. This causes a build error on Loongson-3, so fix it. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12890/Signed-off-by:
-
Huacai Chen authored
Due to datasheet, reserving 0xff800000~0xffffffff (8MB below 4GB) is not enough for RS780E integrated GPU's TOM (top of memory) registers and MSI/MSI-x memory region, so we reserve 0xfe000000~0xffffffff (32MB below 4GB). Signed-off-by:
-
Huacai Chen authored
After commit 92923ca3 ("mm: meminit: only set page reserved in the memblock region"), the MIPS hibernation is broken. Because pages in nosave data section should be "reserved", but currently they aren't set to "reserved" at initialization. This patch makes hibernation work again. Signed-off-by:
-
Andreas Ruprecht authored
Commit 6793f55c ("MIPS: sibyte: Amend dependencies for SIBYTE_BUS_WATCHER") changed the dependencies for SIBYTE_BUS_WATCHER to make it visible only if SIBYTE_BCM112X or SIBYTE_SB1250 are enabled. In the code in arch/mips/sibyte/common/bus_watcher, however, a #if defined() check suggests that this functionality should also be available for SIBYTE_BCM1x55 and SIBYTE_BCM1x80. Make it selectable by extending the dependencies of SIBYTE_BUS_WATCHER in arch/mips/sibyte/Kconfig. Reported-by:
Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by:
Andreas Ruprecht <andreas.ruprecht@fau.de> Cc: valentinrothberg@gmail.com Cc: stefan.hengelein@fau.de Cc: pebolle@tiscali.nl Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10736/Signed-off-by:
-
James Hogan authored
Coherence Manager 3 (CM3) as present in I6400 can fill icache lines effectively from dirty dcaches, so there is no need to flush dirty lines from dcaches through to L2 prior to icache invalidation. Set the MIPS_CACHE_IC_F_DC flag such that cpu_has_ic_fills_f_dc evaluates to true, which avoids those dcache flushes. Signed-off-by:
-
James Hogan authored
It is still necessary to handle icache coherency in flush_cache_range() and copy_to_user_page() when the icache fills from the dcache, even though the dcache does not need to be written back. However when this handling was added in commit 2eaa7ec2 ("[MIPS] Handle I-cache coherency in flush_cache_range()"), it did not do any icache flushing when it fills from dcache. Therefore fix r4k_flush_cache_range() to run local_r4k_flush_cache_range() without taking into account whether icache fills from dcache, so that the icache coherency gets handled. Checks are also added in local_r4k_flush_cache_range() so that the dcache blast doesn't take place when icache fills from dcache. A test to mmap a page PROT_READ|PROT_WRITE, modify code in it, and mprotect it to VM_READ|VM_EXEC (similar to case described in above commit) can hit this case quite easily to verify the fix. A similar check was added in commit f8829cae ("[MIPS] Fix aliasing bug in copy_to_user_page / copy_from_user_page"), so also fix copy_to_user_page() similarly, to call flush_cache_page() without taking into account whether icache fills from dcache, since flush_cache_page() already takes that into account to avoid performing a dcache flush. Signed-off-by:
-
James Hogan authored
HARDWARE_WATCHPOINTS isn't being enabled for CPU_MIPSR6, even though it has an identical hardware watchpoint interface to CPU_MIPSR2, which prevents ptrace watchpoints from being loaded when executing a ptraced process even though the watchpoints are described in /proc/cpuinfo. Enable HARDWARE_WATCHPOINTS for CPU_MIPSR6 too. Signed-off-by:
-
James Hogan authored
Commit f51246ef ("MIPS: Get rid of finish_arch_switch().") moved the __restore_watch() call from finish_arch_switch() (i.e. after resume() returns) to before the resume() call in switch_to(). This results in watchpoints only being restored when a task is descheduled, preventing the watchpoints from being effective most of the time, except due to chance before the watchpoints are lazily removed. Fix the call sequence from switch_to() through to mips_install_watch_registers() to pass the task_struct pointer of the next task, instead of using current. This allows the watchpoints for the next (non-current) task to be restored without reintroducing finish_arch_switch(). Fixes: f51246ef ("MIPS: Get rid of finish_arch_switch().") Signed-off-by:
-
James Hogan authored
When showing backtraces in response to traps, for example crashes and address errors (usually unaligned accesses) when they are set in debugfs to be reported, unwind_stack will be used if the PC was in the kernel text address range. However since EVA it is possible for user and kernel address ranges to overlap, and even without EVA userland can still trigger an address error by jumping to a KSeg0 address. Adjust the check to also ensure that it was running in kernel mode. I don't believe any harm can come of this problem, since unwind_stack() is sufficiently defensive, however it is only meant for unwinding kernel code, so to be correct it should use the raw backtracing instead. Signed-off-by:
-
James Hogan authored
When unwinding through IRQs and exceptions, the unwinding only continues if the PC is a kernel text address, however since EVA it is possible for user and kernel address ranges to overlap, potentially allowing unwinding to continue to user mode if the user PC happens to be in the kernel text address range. Adjust the check to also ensure that the register state from before the exception is actually running in kernel mode, i.e. !user_mode(regs). I don't believe any harm can come of this problem, since the PC is only output, the stack pointer is checked to ensure it resides within the task's stack page before it is dereferenced in search of the return address, and the return address register is similarly only output (if the PC is in a leaf function or the beginning of a non-leaf function). However unwind_stack() is only meant for unwinding kernel code, so to be correct the unwind should stop there. Signed-off-by:
-
Florian Fainelli authored
Read the core ID in bmips_smp_finish() for BMIPS5000 CPUs to get appropriate processor parenting in set_cpu_sibling_map(). Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: jaedon.shin@gmail.com Cc: dragan.stancevic@gmail.com Cc: jogo@openwrt.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12380/Signed-off-by:
-
Florian Fainelli authored
Now that SMP properly works on 7435, do not restrict the number of core, unleash them all. Signed-off-by:
-
Florian Fainelli authored
7435 has 4 7038 L1 base register address for each of its Core + TP (for a total of 4 threads of execution), add the two missing cells for Core 1. We are providing HW interrupts 2/3 even for Core 1/TP0/TP1 because that's what they are, and we can later decide to remap these in software to provide proper interrupt affinity/parenting. Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Florian Fainelli authored
Import bmips_5xxx_init.S from the stblinux-3.3 tree, and to make sure that this would work nicely with a BMIPS multiplatform kernel (with BMIPS330, BMIPS43XX and BMIPS5000 enabled), update soft_reset to check for the BMIPS5200 processor id (PRID_IMP_BMIPS5200) and execute bmips_5xxx_init for these processors to bring them online. Tested on 7425, 7429 and 7435 with CPU hotplug. 7435 SMP still needs some additional changes in the L1 interrupt area to work properly with interrupt affinity. Signed-off-by:
-
Florian Fainelli authored
BMIPS5000 have a PrID value of 0x5A00 and BMIPS5200 have a PrID value of 0x5B00, which, masked with 0x5A00, returns 0x5A00. Update all conditionals on the PrID to cover both variants since we are going to need this to enable BMIPS5200 SMP. The existing check, masking with 0xFF00 would not cover BMIPS5200 at all. Fixes: 68e6a783 ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)") Fixes: 6465460c ("MIPS: BMIPS: change compile time checks to runtime checks") Signed-off-by:
-
Paul Burton authored
Commit fbde2d7d ("MIPS: Add generic SMP IPI support") introduced code that BUG_ON's in the case of a kernel that supports IPI domains but does not have one at runtime. This case is possible on Malta where for IPIs we may use either the GIC (which has an IPI IRQ domain implementation) or core-local software interrupts between VPEs (which do not currently have an IPI IRQ domain implementation). We can not know which will be used until runtime when we know whether a GIC is actually present, and if we run on a system with multiple VPEs and no GIC then the BUG_ON is hit. Commit 19fb5818 ("IPS: Fix broken malta qemu") worked around this for the single-core single-VPE case typically seen using QEMU, but does not catch the multi-VPE case. This patch removes the insufficient CPU presence check that was added and works around the bug differently, effectively reverting that commit. A simple way to reproduce this bug is by using QEMU, which partially implements the MT ASE but does not implement the GIC as of version 2.5. Using "-cpu 34Kf -smp 2" will present a system with 2 VPEs in one core & no GIC, hitting the BUG_ON. Given that we're post-merge-window on the way to v4.6, avoid this by just returning from mips_smp_ipi_init when no IPI IRQ domain is found. Ideally at some point all IPI implementations would be converted to the same IPI IRQ domain interface & we'd be able to restore the check. Signed-off-by:
-
James Hogan authored
Commit 85efde6f ("make exported headers use strict posix types") changed the asm-generic siginfo.h to use the __kernel_* types, and commit 3a471cbc ("remove __KERNEL_STRICT_NAMES") make the internal types accessible only to the kernel, but the MIPS implementation hasn't been updated to match. Switch to proper types now so that the exported asm/siginfo.h won't produce quite so many compiler errors when included alone by a user program. Signed-off-by:
-
Corey Minyard authored
As part of handling a crash on an SMP system, an IPI is send to all other CPUs to save their current registers and stop. It was using task_pt_regs(current) to get the registers, but that will only be accurate if the CPU was interrupted running in userland. Instead allow the architecture to pass in the registers (all pass NULL now, but allow for the future) and then use get_irq_regs() which should be accurate as we are in an interrupt. Fall back to task_pt_regs(current) if nothing else is available. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13050/Signed-off-by:
-
Nikolay Martynov authored
According to 'MIPS32
® interAptivTM Multiprocessing System Programmer’s Guide' CPC_BASE_ADDR takes bits [31:15]. This change is tested ith mt7621 which wasn't working without it. Signed-off-by:Nikolay Martynov <mar.kolya@gmail.com> Reviewed-by:
-
- 08 May, 2016 1 commit
-
-
Linus Torvalds authored
-
- 07 May, 2016 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull misc driver fixes from Gfreg KH: "Here are three small fixes for some driver problems that were reported. Full details in the shortlog below. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: mxs-ocotp: fix buffer overflow in read Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read() misc: mic: Fix for double fetch security bug in VOP driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull IIO driver fixes from Grek KH: "It's really just IIO drivers here, some small fixes that resolve some 'crash on boot' errors that have shown up in the -rc series, and other bugfixes that are required. All have been in linux-next with no reported problems" * tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: mpu6050: Fix name/chip_id when using ACPI iio: imu: mpu6050: fix possible NULL dereferences iio:adc:at91-sama5d2: Repair crash on module removal iio: ak8975: fix maybe-uninitialized warning iio: ak8975: Fix NULL pointer exception on early interrupt
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some last-remaining fixes for USB drivers to resolve issues that have shown up in testing. And two new device ids as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping" usb: musb: jz4740: fix error check of usb_get_phy() Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half" usb: musb: gadget: nuke endpoint before setting its descriptor to NULL USB: serial: cp210x: add Straizona Focusers device ids USB: serial: cp210x: add ID for Link ECU
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "These are a number of updates to fix a few problems found in the ARM nommu code over the last couple of years, caused mostly by changes on the mmu side" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8573/1: domain: move {set,get}_domain under config guard ARM: 8572/1: nommu: change memory reserve for the vectors ARM: 8571/1: nommu: fix PMSAv7 setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - deadlock fixes on driver probe at exynos4-is and s43-camif drivers - a build breakage if media controller is enabled and USB or PCI is built as module. * tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media-device: fix builds when USB or PCI is compiled as module [media] media: s3c-camif: fix deadlock on driver probe() [media] media: exynos4-is: fix deadlock on driver probe
-
