- 31 Jan, 2023 1 commit
-
-
Geert Uytterhoeven authored
The NXP TJR1443 High-speed CAN transceiver with Sleep mode is a pin-compatible alternative for the TI TCAN1043. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/0bfa1e4c43632e49c9512b4e7daa970545545dcf.1674037830.git.geert+renesas@glider.beSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
- 20 Jan, 2023 1 commit
-
-
Geert Uytterhoeven authored
The NXP TJR1443 High-speed CAN transceiver with Sleep mode is a pin-compatible alternative for the TI TCAN1043. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/6ee5e2ce00019bd3f77d6a702b38bab1a45f3bb0.1674037830.git.geert+renesas@glider.beSigned-off-by:
-
- 18 Jan, 2023 8 commits
-
-
Thierry Reding authored
Convert the Tegra XUSB pad controller bindings from free-form text format to json-schema. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230113150804.1272555-1-thierry.reding@gmail.comSigned-off-by:
-
Dmitry Baryshkov authored
The sdx64 uniphy gen3x1 PHY references the qmp_v4_usb3phy_regs_layout while the PHY itself uses v5 regs. While there are only minor differences between v4 and v5 regs and none of them concerns registers mentions in regs_layout, switch the PHY to use qmp_v5_usb3phy_regs_layout, to remove possible confusion. Fixes: 14d98d3b ("phy: qcom-qmp-usb: fix regs layout arrays") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230113212138.421583-2-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
The sm8450 gen3x1 PHY references the pciephy_v4_regs_layout while the PHY itself uses v5 regs. While there are only minor differences between v4 and v5 regs and none of them concerns registers mentions in regs_layout, switch the PHY to use pciephy_v5_regs_layout to remove possible confusion. Fixes: bbe207a1 ("phy: qcom-qmp-pcie: rename regs layout arrays") Signed-off-by:
-
Dmitry Baryshkov authored
Use symbolic names for the values inside reg layout arrays. New register names are added following the PCS register layout that is used by the particular PHY. Note: ipq8074 tables appear to use a mixture of v2 and v3 registers. This might need additional fixes. Signed-off-by:
-
Dmitry Baryshkov authored
The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from register layout. Signed-off-by:
-
Dmitry Baryshkov authored
All currently known QMP UFS PHYs have the same offsets for register sub-regions. Instead of using qmp_ufs_offsets_v5 for older generations of PHYs, rename the offsets struct instance to remove _v5 suffix. Signed-off-by:
-
Sinthu Raja authored
The WIZ acts as a wrapper for SerDes and has Lanes 0 and 2 reserved for USB for type-C lane swap if Lane 1 and Lane 3 are linked to the USB PHY that is integrated into the SerDes IP. The WIZ control register has to be configured to support this lane swap feature. The support for swapping lanes 2 and 3 is missing and therefore add support to configure the control register to swap between lanes 2 and 3 if PHY type is USB. Signed-off-by:
Sinthu Raja <sinthu.raja@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230113150615.19375-3-sinthu.raja@ti.comSigned-off-by:
-
Sinthu Raja authored
It's possible that the Type-C plug orientation on the DIR line will be implemented through hardware design. In that situation, there won't be an external GPIO line available, but the driver still needs to address this since the DT won't use the typec-dir-gpios property. Add code to handle LN10 Type-C swap if typec-dir-gpios property is not specified in DT. Signed-off-by:
-
- 17 Jan, 2023 12 commits
-
-
Manivannan Sadhasivam authored
UFS PHY in SC8280XP SoC is capable of operating at HS G4 mode and the init sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance reusing the G4 init sequence of SM8350. Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-13-manivannan.sadhasivam@linaro.orgSigned-off-by:
-
Manivannan Sadhasivam authored
UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance reusing the G4 init sequence of SM8350. Reviewed-by:
-
Manivannan Sadhasivam authored
UFS PHY in SM8350 SoC is capable of operating at HS G4 mode. Hence, add the required register settings using the tables_hs_g4 struct instance. Reviewed-by:
-
Manivannan Sadhasivam authored
SM8350 default init sequence sets some PCS registers to HS G3, thereby disabling HS G4 mode. This has the effect on MPHY capability negotiation between the host and the device during link startup and causes the PA_MAXHSGEAR to G3 irrespective of device max gear. Due to that, the agreed gear speed determined by the UFS core will become G3 only and the platform won't run at G4. So, let's remove setting these registers for SM8350 as like other G4 compatible platforms. One downside of this is that, when the board design uses non-G4 compatible device, then MPHY will continue to run in the default mode (G4) even if UFSHCD runs in G3. But this is the case for other platforms as well. Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by:
-
Manivannan Sadhasivam authored
UFS PHY in SM8250 SoC is capable of operating at HS G4 mode. Hence, add the required register settings using the tables_hs_g4 struct instance. This also requires a separate qmp_phy_cfg for SM8250 instead of reusing SM8150. Reviewed-by:
-
Manivannan Sadhasivam authored
UFS PHY in SM8150 SoC is capable of operating at HS G4 mode. Hence, add the required register settings using the tables_hs_g4 struct instance. Reviewed-by:
-
Manivannan Sadhasivam authored
Since now there is support for configuring the HS Rate B mode properly, let's move the register setting to tbls_hs_b struct for all SoCs. This allows the PHY to be configured in Rate A initially and then in Rate B if requested by the UFS driver. Reviewed-by:
-
Manivannan Sadhasivam authored
Add separate tables_hs_g4 instance to allow the PHY driver to configure the PHY in HS G4 mode. The individual SoC configs need to supply the Rx, Tx and PCS register setting in tables_hs_g4 and the UFS driver can request the Hs G4 mode by calling phy_set_mode_ext() with submode set to UFS_HS_G4. Reviewed-by:
-
Manivannan Sadhasivam authored
Add separate tables_hs_b instance to allow the PHY driver to configure the PHY in HS Series B mode. The individual SoC configs need to supply the serdes register setting in tables_hs_b and the UFS driver can request the Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B. Reviewed-by:
-
Manivannan Sadhasivam authored
As done for Qcom PCIe PHY driver, let's move the register settings to the common qmp_phy_cfg_tbls struct. This helps in adding any additional PHY settings needed for functionalities like HS-G4 in the future by adding one more instance of the qmp_phy_cfg_tbls. Reviewed-by:
-
Manivannan Sadhasivam authored
Only MSM8996 is using "_ufs_" naming convention for PHY definitions instead of "_ufsphy_" as like other SoCs. So to maintain the uniformity, let's rename all of the definitions to use "_ufsphy_". Reviewed-by:
-
Manivannan Sadhasivam authored
Following the other QMP PHY drivers like PCIe, let's remove the "_tbl" suffix from the qmp_phy_init_tbl definitions. This helps in maintaining the uniformity across all of the QMP PHY drivers. Reviewed-by:
-
- 13 Jan, 2023 14 commits
-
-
Neil Armstrong authored
Convert the Amlogic Meson GXL USB2 PHY bindings to dt-schema. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v2-8-36ad050bb625@linaro.orgSigned-off-by:
-
Lux Aliaga authored
The SM6125 UFS PHY is compatible with the one from SM6115. Add a compatible for it and modify the config from SM6115 to make them compatible with the SC8280XP binding Signed-off-by:
Lux Aliaga <they@mint.lgbt> Reviewed-by:
Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20230108195336.388349-4-they@mint.lgbtSigned-off-by:
-
Lux Aliaga authored
Document the QMP UFS PHY compatible for SM6125. Signed-off-by:
Dhruva Gole <d-gole@ti.com> Acked-by:
-
Krzysztof Kozlowski authored
Different variants of Qualcomm USB3 DP PHY take different clocks (according to upstream DTS and Linux driver): sc7280-herobrine-crd.dtb: phy-wrapper@88e9000: clocks: [[43, 151], [39, 0], [43, 153]] is too short sc7280-herobrine-crd.dtb: phy-wrapper@88e9000: clock-names:1: 'cfg_ahb' was expected ... sm8250-hdk.dtb: phy@88e9000: clocks: [[46, 185], [44, 0], [46, 187]] is too short sm8250-hdk.dtb: phy@88e9000: clock-names:1: 'cfg_ahb' was expected Signed-off-by:
-
Krzysztof Kozlowski authored
USB3 DP PHY on SC7280 is used with SM8250 fallback: sc7280-herobrine-evoker.dtb: phy-wrapper@88e9000: compatible: ['qcom,sc7280-qmp-usb3-dp-phy', 'qcom,sm8250-qmp-usb3-dp-phy'] is too long Signed-off-by:
-
Krzysztof Kozlowski authored
It is more readable to define properties in top-level "properties:" and restrict them (if needed) per compatible in the "if" block. Defining properties in "if" block does not work correctly with additionalProperties:false: sc7180-trogdor-pazquel-lte-ti.dtb: phy@88e3000: 'qcom,bias-ctrl-value', 'qcom,charge-ctrl-value', 'qcom,hsdisc-trim-value', 'qcom,imp-res-offset-value', 'qcom,preemphasis-level', 'qcom,preemphasis-width' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
Document SoC-specific compatibles with generic fallback (e.g. qcom,usb-snps-hs-7nm-phy) already used in DTSI. Add SoC-specific compatibles for PHY on SDX55 and SDX65. This disallows usage of the qcom,usb-snps-hs-5nm-phy and qcom,usb-snps-hs-7nm-phy generic compatibles alone. Do not touch remaining two compatibles - qcom,usb-snps-femto-v2-phy and qcom,sc8180x-usb-hs-phy - because there are no upstream users, so not sure what was the intention for them. This fixes warnings like: sa8295p-adp.dtb: phy@88e5000: compatible: 'oneOf' conditional failed, one must be fixed: ['qcom,sc8280xp-usb-hs-phy', 'qcom,usb-snps-hs-5nm-phy'] is too long 'qcom,sc8280xp-usb-hs-phy' is not one of ['qcom,sm8150-usb-hs-phy', 'qcom,sm8250-usb-hs-phy', 'qcom,sm8350-usb-hs-phy', 'qcom,sm8450-usb-hs-phy'] 'qcom,usb-snps-hs-7nm-phy' was expected Signed-off-by: -
Yoshihiro Shimoda authored
Remove retry code in r8a779f0_eth_serdes_init() because r8a779f0_eth_serdes_chan_setting() was fixed so that no timeout happened in the initializing procedure. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221226065316.3895480-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
Add r8a779f0_eth_serdes_power_on() to initialize the hardware for each channel from the step 9 or later on the datasheet. In other words, the procedure from the step 1 to 8 is for all channel and it is needed once only. So, the .init() in any channel instance is called, this driver initializes the hardware from step 1 to 8. And then, .power_on() is called, this driver initializes the hardware from step 9 or later. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert Qualcomm USB HSIC PHY bindings to DT schema. Signed-off-by:
-
Haotien Hsu authored
Support role-switch-default-mode property when usb-role-switch is enabled. Signed-off-by:
Haotien Hsu <haotienh@nvidia.com> Link: https://lore.kernel.org/r/20221216042146.99307-1-haotienh@nvidia.comSigned-off-by:
-
Bhupesh Sharma authored
Enable SM6115 / SM4250 USB3 PHY support by adding the qmp_phy_cfg data. Since this PHY is the same as the one used on QCM2290, reuse the QCM2290 qmp_phy_cfg data already available. Signed-off-by:
Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20221213122843.454845-4-bhupesh.sharma@linaro.orgSigned-off-by:
-
Bhupesh Sharma authored
As per the Qualcomm QMP v3 PHY programming guide document, QSERDES_V3_RX_UCDR_PI_CONTROLS configuration should be set to an initial configuration value of 0x80. Fix the same. Signed-off-by:
-
Bhupesh Sharma authored
Add dt-bindings for USB3 PHY found on Qualcomm SM6115 / SM4250 SoC. Signed-off-by:
-
- 12 Jan, 2023 4 commits
-
-
Frank Wunderlich authored
Add compatible string for mt7986. Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Acked-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20230106152845.88717-2-linux@fw-web.deSigned-off-by:
-
Andre Przywara authored
So far we were assigning some crude "type" (SoC name, really) to each Allwinner USB PHY model, then guarding certain quirks based on this. This does not only look weird, but gets more or more cumbersome to maintain. Remove the bogus type names altogether, instead introduce flags for each quirk, and explicitly check for them. This improves readability, and simplifies future extensions. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230109012223.4079299-4-andre.przywara@arm.comSigned-off-by:
-
Icenowy Zheng authored
The F1C100s SoC has one USB OTG port connected to a MUSB controller. Add support for its USB PHY. Signed-off-by:
Icenowy Zheng <uwu@icenowy.me> Acked-by:
-
Icenowy Zheng authored
Allwinner F1C100s has the most simple USB PHY among all Allwinner SoCs, because it has only one OTG USB controller, no host-only OHCI/EHCI controllers. Add a binding document for it. Following the current situation of one YAML file per SoC, this one is based on allwinner,sun8i-v3s-usb-phy.yaml, but with OHCI/EHCI-related bits removed. (The same driver in Linux, phy-sun4i-usb, covers all these binding files now.) Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
