- 29 Jul, 2023 9 commits
-
-
Sean Christopherson authored
Now that handle_fastpath_set_msr_irqoff() acquires kvm->srcu, i.e. allows dereferencing memslots during WRMSR emulation, drop the requirement that "next RIP" is valid. In hindsight, acquiring kvm->srcu would have been a better fix than avoiding the pastpath, but at the time it was thought that accessing SRCU-protected data in the fastpath was a one-off edge case. This reverts commit 5c30e810. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20230721224337.2335137-3-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Temporarily acquire kvm->srcu for read when potentially emulating WRMSR in the VM-Exit fastpath handler, as several of the common helpers used during emulation expect the caller to provide SRCU protection. E.g. if the guest is counting instructions retired, KVM will query the PMU event filter when stepping over the WRMSR. dump_stack+0x85/0xdf lockdep_rcu_suspicious+0x109/0x120 pmc_event_is_allowed+0x165/0x170 kvm_pmu_trigger_event+0xa5/0x190 handle_fastpath_set_msr_irqoff+0xca/0x1e0 svm_vcpu_run+0x5c3/0x7b0 [kvm_amd] vcpu_enter_guest+0x2108/0x2580 Alternatively, check_pmu_event_filter() could acquire kvm->srcu, but this isn't the first bug of this nature, e.g. see commit 5c30e810 ("KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"). Providing protection for the entirety of WRMSR emulation will allow reverting the aforementioned commit, and will avoid having to play whack-a-mole when new uses of SRCU-protected structures are inevitably added in common emulation helpers. Fixes: dfdeda67 ("KVM: x86/pmu: Prevent the PMU from counting disallowed events") Reported-by:
Greg Thelen <gthelen@google.com> Reported-by:
Aaron Lewis <aaronlewis@google.com> Signed-off-by:
-
Sean Christopherson authored
Use vmread_error() to report VM-Fail on VMREAD for the "asm goto" case, now that trampoline case has yet another wrapper around vmread_error() to play nice with instrumentation. Signed-off-by:
-
Sean Christopherson authored
Mark vmread_error_trampoline() as noinstr, and add a second trampoline for the CONFIG_CC_HAS_ASM_GOTO_OUTPUT=n case to enable instrumentation when handling VM-Fail on VMREAD. VMREAD is used in various noinstr flows, e.g. immediately after VM-Exit, and objtool rightly complains that the call to the error trampoline leaves a no-instrumentation section without annotating that it's safe to do so. vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0xc9: call to vmread_error_trampoline() leaves .noinstr.text section Note, strictly speaking, enabling instrumentation in the VM-Fail path isn't exactly safe, but if VMREAD fails the kernel/system is likely hosed anyways, and logging that there is a fatal error is more important than *maybe* encountering slightly unsafe instrumentation. Reported-by:
Su Hui <suhui@nfschina.com> Signed-off-by:
-
Like Xu authored
As was attempted commit 14717e20 ("kvm: Conditionally register IRQ bypass consumer"): "if we don't support a mechanism for bypassing IRQs, don't register as a consumer. Initially this applied to AMD processors, but when AVIC support was implemented for assigned devices, kvm_arch_has_irq_bypass() was always returning true. We can still skip registering the consumer where enable_apicv or posted-interrupts capability is unsupported or globally disabled. This eliminates meaningless dev_info()s when the connect fails between producer and consumer", such as on Linux hosts where enable_apicv or posted-interrupts capability is unsupported or globally disabled. Cc: Alex Williamson <alex.williamson@redhat.com> Reported-by:
Yong He <alexyonghe@tencent.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217379Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20230724111236.76570-1-likexu@tencent.com> Signed-off-by:
-
Peng Hao authored
The pid_table of ipiv is the persistent memory allocated by per-vcpu, which should be counted into the memory cgroup. Signed-off-by:
Peng Hao <flyingpeng@tencent.com> Message-Id: <CAPm50aLxCQ3TQP2Lhc0PX3y00iTRg+mniLBqNDOC=t9CLxMwwA@mail.gmail.com> Signed-off-by:
-
Maxim Levitsky authored
The code was blindly assuming that kvm_cpu_get_interrupt never returns -1 when there is a pending interrupt. While this should be true, a bug in KVM can still cause this. If -1 is returned, the code before this patch was converting it to 0xFF, and 0xFF interrupt was injected to the guest, which results in an issue which was hard to debug. Add WARN_ON_ONCE to catch this case and skip the injection if this happens again. Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20230726135945.260841-4-mlevitsk@redhat.com> Signed-off-by:
-
Maxim Levitsky authored
When the APICv is inhibited, the irr_pending optimization is used. Therefore, when kvm_apic_update_irr sets bits in the IRR, it must set irr_pending to true as well. Signed-off-by:
-
Maxim Levitsky authored
If APICv is inhibited, then IPIs from peer vCPUs are done by atomically setting bits in IRR. This means, that when __kvm_apic_update_irr copies PIR to IRR, it has to modify IRR atomically as well. Signed-off-by:
-
- 23 Jul, 2023 18 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Swapping the ring buffer for snapshotting (for things like irqsoff) can crash if the ring buffer is being resized. Disable swapping when this happens. The missed swap will be reported to the tracer - Report error if the histogram fails to be created due to an error in adding a histogram variable, in event_hist_trigger_parse() - Remove unused declaration of tracing_map_set_field_descr() * tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/histograms: Return an error if we fail to add histogram to hist_vars list ring-buffer: Do not swap cpu_buffer during resize process tracing: Remove unused extern declaration tracing_map_set_field_descr()
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix stale help text in gconfig - Support *.S files in compile_commands.json - Flatten KBUILD_CFLAGS - Fix external module builds with Rust so that temporary files are created in the modules directories instead of the kernel tree * tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rust: avoid creating temporary files kbuild: flatten KBUILD_CFLAGS gen_compile_commands: add assembly files to compilation database kconfig: gconfig: correct program name in help text kconfig: gconfig: drop the Show Debug Info help text
-
Miguel Ojeda authored
`rustc` outputs by default the temporary files (i.e. the ones saved by `-Csave-temps`, such as `*.rcgu*` files) in the current working directory when `-o` and `--out-dir` are not given (even if `--emit=x=path` is given, i.e. it does not use those for temporaries). Since out-of-tree modules are compiled from the `linux` tree, `rustc` then tries to create them there, which may not be accessible. Thus pass `--out-dir` explicitly, even if it is just for the temporary files. Similarly, do so for Rust host programs too. Reported-by:
Raphael Nestler <raphael.nestler@gmail.com> Closes: https://github.com/Rust-for-Linux/linux/issues/1015Reported-by:
Andrea Righi <andrea.righi@canonical.com> Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs Fixes: 295d8398 ("kbuild: specify output names separately for each emission type from rustc") Cc: stable@vger.kernel.org Signed-off-by:
Miguel Ojeda <ojeda@kernel.org> Tested-by:
Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg s390: - Two fixes for asynchronous destroy x86 fixes will come early next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: pv: fix index value of replaced ASCE KVM: s390: pv: simplify shutdown and fix race KVM: arm64: Fix the name of sys_reg_desc related to PMU KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption KVM: arm64: Add missing BTI instructions KVM: arm64: Correctly handle page aging notifiers for unaligned memslot KVM: arm64: Disable preemption in kvm_arch_hardware_enable() KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's checkpoint code" * tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rbtree traversal bug in ext4_mb_use_preallocated ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail() ext4: correct inline offset when handling xattrs in inode body jbd2: remove __journal_try_to_free_buffer() jbd2: fix a race when checking checkpoint buffer busy jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint jbd2: remove journal_clean_one_cp_list() jbd2: remove t_checkpoint_io_list jbd2: recheck chechpointing non-dirty buffer
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fix from Steve French: "Add minor debugging improvement. The change improves ability to read a network trace to debug problems on encrypted connections which are very common (e.g. using wireshark or tcpdump). That works today with tools like 'smbinfo keys /mnt/file' but requires passing in a filename on the mount (see e.g. [1]), but it often makes more sense to just pass in the mount point path (ie a directory not a filename). So this fix was needed to debug some types of problems (an obvious example is on an encrypted connection failing operations on an empty share or with no files in the root of the directory) - so you can simply pass in the 'smbinfo keys <mntpoint>' and get the information that wireshark needs" Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1] * tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: allow dumping keys for directories too
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Two fixes for asynchronous destroy
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #1 - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt. - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking. - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg.
-
Mohamed Khalfella authored
Commit 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") added a check to fail histogram creation if save_hist_vars() failed to add histogram to hist_vars list. But the commit failed to set ret to failed return code before jumping to unregister histogram, fix it. Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 6018b585 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") Signed-off-by:
Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Chen Lin authored
When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec2 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec2 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418 [ 233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003 [ 233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58 [ 233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001 [ 233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000 [ 233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c [ 233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0 [ 233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000 [ 233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000 [ 233.734418] Call trace: [ 233.734593] rb_update_pages+0x1a8/0x3f8 [ 233.734853] update_pages_handler+0x1c/0x38 [ 233.735148] process_one_work+0x1f0/0x468 [ 233.735525] worker_thread+0x54/0x410 [ 233.735852] kthread+0x124/0x138 [ 233.736064] ret_from_fork+0x10/0x20 [ 233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060) [ 233.736959] ---[ end trace 0000000000000000 ]--- After analysis, the seq of the error is as follows [1-5]: int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, int cpu_id) { for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //1. get cpu_buffer, aka cpu_buffer(A) ... ... schedule_work_on(cpu, &cpu_buffer->update_pages_work); //2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to // update_pages_handler, do the update process, set 'update_done' in // complete(&cpu_buffer->update_done) and to wakeup resize process. //----> //3. Just at this moment, ring_buffer_swap_cpu is triggered, //cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer. //ring_buffer_swap_cpu is called as the 'Call trace' below. Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x18/0x28 dump_stack+0x12c/0x188 ring_buffer_swap_cpu+0x2f8/0x328 update_max_tr_single+0x180/0x210 check_critical_timing+0x2b4/0x2c8 tracer_hardirqs_on+0x1c0/0x200 trace_hardirqs_on+0xec/0x378 el0_svc_common+0x64/0x260 do_el0_svc+0x90/0xf8 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x180/0x1c0 //<---- /* wait for all the updates to complete */ for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //4. get cpu_buffer, cpu_buffer(B) is used in the following process, //the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong. //for example, cpu_buffer(A)->update_done will leave be set 1, and will //not 'wait_for_completion' at the next resize round. if (!cpu_buffer->nr_pages_to_update) continue; if (cpu_online(cpu)) wait_for_completion(&cpu_buffer->update_done); cpu_buffer->nr_pages_to_update = 0; } ... } //5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong, //Continuing to run in the wrong state, then oops occurs. Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cnSigned-off-by:Chen Lin <chen.lin5@zte.com.cn> Signed-off-by:
-
YueHaibing authored
Since commit 08d43a5f ("tracing: Add lock-free tracing_map"), this is never used, so can be removed. Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Alexey Dobriyan authored
Make it slightly easier to see which compiler options are added and removed (and not worry about column limit too!). Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by:
Nicolas Schier <n.schier@avm.de> Signed-off-by:
-
Benjamin Gray authored
Like C source files, tooling can find it useful to have the assembly source file compilation recorded. The .S extension appears to used across all architectures. Signed-off-by:
Benjamin Gray <bgray@linux.ibm.com> Reviewed-by:
Fangrui Song <maskray@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Ojaswin Mujoo authored
During allocations, while looking for preallocations(PA) in the per inode rbtree, we can't do a direct traversal of the tree because ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted and that can cause direct traversal to skip some entries. This was leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy our request and ultimately tried to create a new PA that would overlap with the missed one. To makes sure we handle that case while still keeping the performance of the rbtree, we make use of the fact that the only pa that could possibly overlap the original goal start is the one that satisfies the below conditions: 1. It must have it's logical start immediately to the left of (ie less than) original logical start. 2. It must not be deleted To find this pa we use the following traversal method: 1. Descend into the rbtree normally to find the immediate neighboring PA. Here we keep descending irrespective of if the PA is deleted or if it overlaps with our request etc. The goal is to find an immediately adjacent PA. 2. If the found PA is on right of original goal, use rb_prev() to find the left adjacent PA. 3. Check if this PA is deleted and keep moving left with rb_prev() until a non deleted PA is found. 4. This is the PA we are looking for. Now we can check if it can satisfy the original request and proceed accordingly. This approach also takes care of having deleted PAs in the tree. (While we are at it, also fix a possible overflow bug in calculating the end of a PA) [1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/ Cc: stable@kernel.org # 6.4 Fixes: 38727786 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list") Signed-off-by:
Ojaswin Mujoo <ojaswin@linux.ibm.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Ojaswin Mujoo authored
In ext4_mb_choose_next_group_best_avail(), we want the start order to be 1 less than goal length and the min_order to be, at max, 1 more than the original length. This commit fixes an off by one issue that arose due to the fact that 1 << fls(n) > (n). After all the processing: order = 1 order below goal len min_order = maximum of the three:- - order - trim_order - 1 order below B2C(s_stripe) - 1 order above original len Cc: stable@kernel.org Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)") Signed-off-by: -
Eric Whitney authored
When run on a file system where the inline_data feature has been enabled, xfstests generic/269, generic/270, and generic/476 cause ext4 to emit error messages indicating that inline directory entries are corrupted. This occurs because the inline offset used to locate inline directory entries in the inode body is not updated when an xattr in that shared region is deleted and the region is shifted in memory to recover the space it occupied. If the deleted xattr precedes the system.data attribute, which points to the inline directory entries, that attribute will be moved further up in the region. The inline offset continues to point to whatever is located in system.data's former location, with unfortunate effects when used to access directory entries or (presumably) inline data in the inode body. Cc: stable@kernel.org Signed-off-by:
Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Reinstate support for little endian ELFv1 binaries, which it turns out still exist in the wild. - Revert a change which used asm goto for WARN_ON/__WARN_FLAGS, as it lead to dead code generation and seemed to trigger compiler bugs in some edge cases. - Fix a deadlock in the pseries VAS code, between live migration and the driver's mmap handler. - Disable KCOV instrumentation in the powerpc KASAN code. Thanks to Andrew Donnellan, Benjamin Gray, Christophe Leroy, Haren Myneni, Russell Currey, and Uwe Kleine-König. * tag 'powerpc-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc/64s: Remove support for ELFv1 little endian userspace" powerpc/kasan: Disable KCOV in KASAN code powerpc/512x: lpbfifo: Convert to platform remove callback returning void powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto" powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close
-
- 22 Jul, 2023 8 commits
-
-
Steve French authored
From 2.43 to 2.44 Signed-off-by:Steve French <stfrench@microsoft.com>
-
Shyam Prasad N authored
Dumping the enc/dec keys is a session wide operation. And it should not matter if the ioctl was run on a regular file or a directory. Currently, we obtain the tcon pointer from the cifs file handle. But since there's no dir open call in cifs, this is not populated for dirs. This change allows dumping of session keys using ioctl even for directories. To do this, we'll now get the tcon pointer from the superblock, and not from the file handle. Signed-off-by:
Shyam Prasad N <sprasad@microsoft.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR) check to fault handler to prevent error handling for return values that don't indicate an error - Use kfree_sensitive() instead of kfree() in paes crypto code to clear memory that may contain keys before freeing it - Fix reply buffer size calculation for CCA replies in zcrypt device driver * tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: fix reply buffer calculations for CCA replies s390/crypto: use kfree_sensitive() instead of kfree() s390/mm: fix per vma lock fault handling
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fixes from Jens Axboe: - Fix for loop regressions (Mauricio) - Fix a potential stall with batched wakeups in sbitmap (David) - Fix for stall with recursive plug flushes (Ross) - Skip accounting of empty requests for blk-iocost (Chengming) - Remove a dead field in struct blk_mq_hw_ctx (Chengming) * tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux: loop: do not enforce max_loop hard limit by (new) default loop: deprecate autoloading callback loop_probe() sbitmap: fix batching wakeup blk-iocost: skip empty flush bio in iocost blk-mq: delete dead struct blk_mq_hw_ctx->queued field blk-mq: Fix stall due to recursive flush plug
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Fix for io-wq not always honoring REQ_F_NOWAIT, if it was set and punted directly (eg via DRAIN) (me) - Capability check fix (Ondrej) - Regression fix for the mmap changes that went into 6.4, which apparently broke IA64 (Helge) * tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux: ia64: mmap: Consider pgoff when searching for free mapping io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area() io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq io_uring: don't audit the capability check in io_uring_create()
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Fix moortec,mr75203 schema usage of 'multipleOf' keyword - Fix regression in systems depending on "of-display" device name - Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y - Drop two obsolete serial .txt bindings * tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt dt-bindings: serial: Remove obsolete cavium-uart.txt dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients of: Preserve "of-display" device name for compatibility of: make OF_EARLY_FLATTREE depend on HAS_IOMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixes from Mark Brown: "Three fixes here: - The issues with accounting for register and padding length on raw buses turn out to be quite widespread in custom buses. In order to avoid disturbing anything drop the initial fixes and fall back to a point fix in the SMBus code where the issue was originally noticed, a more substantial refactoring of the API which ensures that all buses make the same assumptions will follow. - The generic regcache code had been forcing on async I/O which did not work with the new maple tree sync code when used with SPI. Since that was mainly for the rbtree cache and the assumptions about hardware that drove the choice are probably not true any more fix this by pushing the enablement of async down into the rbtree code. This probably also makes cache syncs for systems faster though it's not the point. - The test code was triggering use of the rbtree and maple tree caches with dynamic allocation of nodes since all the testing is with RAM backed caches with no I/O performance issues. Just disable the locking in the tests to avoid triggering warnings when allocation debugging is turned on, it's not really what's being tested" * tag 'regmap-fix-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Disable locking for RBTREE and MAPLE unit tests regcache: Push async I/O request down into the rbtree cache regmap: Account for register length in SMBus I/O limits regmap: Drop initial version of maximum transfer length fixes -
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix initial value handling for output-only pins in gpio-tps68470 - fix two resource leaks in gpio-mvebu * tag 'gpio-fixes-for-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mvebu: fix irq domain leak gpio: mvebu: Make use of devm_pwmchip_add gpio: tps68470: Make tps68470_gpio_output() always set the initial value
-
- 21 Jul, 2023 5 commits
-
-
Rob Herring authored
nxp,lpc1850-uart.txt binding is already covered by 8250.yaml, so remove it. Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230707221607.1064888-1-robh@kernel.orgSigned-off-by:
Rob Herring <robh@kernel.org>
-
Rob Herring authored
cavium-uart.txt binding is already covered by 8250.yaml, so remove it. Reviewed-by:
-
Mauricio Faria de Oliveira authored
Problem: The max_loop parameter is used for 2 different purposes: 1) initial number of loop devices to pre-create on init 2) maximum number of loop devices to add on access/open() Historically, its default value (zero) caused 1) to create non-zero number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on 2) to add devices with autoloading. However, the default value changed in commit 85c50197 ("loop: Fix the max_loop commandline argument treatment when it is set to 0") to CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices. That does improve 1), but unfortunately it breaks 2), as the default behavior changed from no-limit to hard-limit. Example: For example, this userspace code broke for N >= CONFIG, if the user relied on the default value 0 for max_loop: mknod("/dev/loopN"); open("/dev/loopN"); // now fails with ENXIO Though affected users may "fix" it with (loop.)max_loop=0, this means to require a kernel parameter change on stable kernel update (that commit Fixes: an old commit in stable). Solution: The original semantics for the default value in 2) can be applied if the parameter is not set (ie, default behavior). This still keeps the intended function in 1) and 2) if set, and that commit's intended improvement in 1) if max_loop=0. Before 85c50197: - default: 1) CONFIG devices 2) no limit - max_loop=0: 1) CONFIG devices 2) no limit - max_loop=X: 1) X devices 2) X limit After 85c50197: - default: 1) CONFIG devices 2) CONFIG limit (*) - max_loop=0: 1) 0 devices (*) 2) no limit - max_loop=X: 1) X devices 2) X limit This commit: - default: 1) CONFIG devices 2) no limit (*) - max_loop=0: 1) 0 devices 2) no limit - max_loop=X: 1) X devices 2) X limit Future: The issue/regression from that commit only affects code under the CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is contained under it. Once that deprecated functionality/code is removed, the purpose 2) of max_loop (hard limit) is no longer in use, so the module parameter description can be changed then. Tests: Linux 6.4-rc7 CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLOCK_LEGACY_AUTOLOAD=y - default (original) # ls -1 /dev/loop* /dev/loop-control /dev/loop0 ... /dev/loop7 # ./test-loop open: /dev/loop8: No such device or address - default (patched) # ls -1 /dev/loop* /dev/loop-control /dev/loop0 ... /dev/loop7 # ./test-loop # - max_loop=0 (original & patched): # ls -1 /dev/loop* /dev/loop-control # ./test-loop # - max_loop=8 (original & patched): # ls -1 /dev/loop* /dev/loop-control /dev/loop0 ... /dev/loop7 # ./test-loop open: /dev/loop8: No such device or address - max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set) # ls -1 /dev/loop* /dev/loop-control # ./test-loop open: /dev/loop8: No such device or address Fixes: 85c50197 ("loop: Fix the max_loop commandline argument treatment when it is set to 0") Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Mauricio Faria de Oliveira authored
The 'probe' callback in __register_blkdev() is only used under the CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard. The loop_probe() function is only used for that callback, so guard it too, accordingly. See commit fbdee71b ("block: deprecate autoloading based on dev_t"). Signed-off-by:
-
David Jeffery authored
Current code supposes that it is enough to provide forward progress by just waking up one wait queue after one completion batch is done. Unfortunately this way isn't enough, cause waiter can be added to wait queue just after it is woken up. Follows one example(64 depth, wake_batch is 8) 1) all 64 tags are active 2) in each wait queue, there is only one single waiter 3) each time one completion batch(8 completions) wakes up just one waiter in each wait queue, then immediately one new sleeper is added to this wait queue 4) after 64 completions, 8 waiters are wakeup, and there are still 8 waiters in each wait queue 5) after another 8 active tags are completed, only one waiter can be wakeup, and the other 7 can't be waken up anymore. Turns out it isn't easy to fix this problem, so simply wakeup enough waiters for single batch. Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Gabriel Krisman Bertazi <krisman@suse.de> Reviewed-by:
Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20230721095715.232728-1-ming.lei@redhat.comSigned-off-by:
-
