- 29 Mar, 2011 1 commit
-
-
Russell King authored
-
- 28 Mar, 2011 6 commits
-
-
Stephen Boyd authored
The inline assembly differences for v6 vs. v7 are purely optimizations. On a v7 processor, an mrc with the pc sets the condition codes to the 28-31 bits of the register being read. It just so happens that the TX/RX full bits the DCC support code is testing for are high enough in the register to be put into the condition codes. On a v6 processor, this "feature" isn't implemented and thus we have to do the usual read, mask, test operations to check for TX/RX full. Thus, we can drop the v7 implementation and just use the v6 implementation for both. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ming Lei authored
The patch fixes the warning below: WARNING: arch/arm/kernel/built-in.o(.data+0x27c): Section mismatch in reference from the variable etb_driver to the function .init.text:etb_probe() The variable etb_driver references the function __init etb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/arm/kernel/built-in.o(.data+0x2cc): Section mismatch in reference from the variable etm_driver to the function .init.text:etm_probe() The variable etm_driver references the function __init etm_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Colin Cross authored
The PrPMC1100 machine was removed in 2.6.11, but left a reference to machine_is_prpmc1100 in arch/arm/kernel/bios32.c. 6f82f4db removed the machine type, which causes a build failure: CC arch/arm/kernel/bios32.o arch/arm/kernel/bios32.c: In function 'pci_fixup_prpmc1100': arch/arm/kernel/bios32.c:174: error: implicit declaration of function 'machine_is_prpmc1100' Remove the unused pci_fixup_prpcm1100. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Viktor Rosendahl authored
The Rn value from the emulation is unconditionally written back; this is fine as long as Rn != PC because in that case, even if the instruction isn't a write back instruction, it will only result in the same value being written back. In case Rn == PC, then the emulated instruction doesn't have the actual PC value in Rn but an adjusted value; when this is written back, it will result in the PC being incorrectly updated. An altenative solution would be to check bits 24 and 22 to see whether the instruction actually is a write back instruction or not. I think it's enough to check whether Rn != PC, because: - it's looks cheaper than the alternative - to my understaning it's not permitted to update the PC with a write back instruction, so we don't lose any ability to emulate legal instructions. - in case of writing back for non write back instructions where Rn != PC, it doesn't matter because the values are the same. Regarding the second point above, it would possibly be prudent to add some checking to prep_emulate_ldr_str(), so that instructions with both write back and Rn == PC would be rejected. Signed-off-by: Viktor Rosendahl <viktor.rosendahl@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
-
-
- 27 Mar, 2011 1 commit
-
-
Konstantin Porotchkin authored
Remove call to the old GPIO init function. Fix old MPP control offset value. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Acked-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
-
- 26 Mar, 2011 28 commits
-
-
Will Deacon authored
If a counter overflows during a perf stat profiling run it may overtake the last known value of the counter: 0 prev new 0xffffffff |----------|-------|----------------------| In this case, the number of events that have occurred is (0xffffffff - prev) + new. Unfortunately, the event update code will not realise an overflow has occurred and will instead report the event delta as (new - prev) which may be considerably smaller than the real count. This patch adds an extra argument to armpmu_event_update which indicates whether or not an overflow has occurred. If an overflow has occurred then we use the maximum period of the counter to calculate the elapsed events. Acked-by: Jamie Iles <jamie@jamieiles.com> Reported-by: Ashwin Chaugule <ashwinc@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
ARMv7 dictates that the interrupt-enable and count-enable registers for each PMU counter are UNKNOWN following core reset. This patch adds a new (optional) function pointer to struct arm_pmu for resetting the PMU state during init. The reset function is called on each CPU via an arch_initcall in the generic ARM perf_event code and allows the PMU backend to write sane values to any UNKNOWN registers. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
The ARMv7 architecture does not guarantee that effects from co-processor writes are immediately visible to following instructions. This patch adds two isbs to the ARMv7 perf code: (1) Immediately after selecting an event register, so that the PMU state following this instruction is consistent with the new event. (2) Immediately before writing to the PMCR, so that any previous writes to the PMU have taken effect before (typically) enabling the counters. Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Pitre authored
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Pawel Moll authored
The second GIC, present when EB board is used with a MPCore tile, was initialised starting with irq number 64, which made interrupts 64-95 in the primary GIC unusable. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable Conflicts: arch/arm/mach-pxa/tosa.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: Introduce ARCH_NO_SYSDEV_OPS config option (v2) cpufreq: Use syscore_ops for boot CPU suspend/resume (v2) KVM: Use syscore_ops instead of sysdev class and sysdev PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev timekeeping: Use syscore_ops instead of sysdev class and sysdev x86: Use syscore_ops instead of sysdev classes and sysdevs
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix test of uninitialized netdev
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits) [SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module [SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion [SCSI] Revert "[SCSI] Retrieve the Caching mode page" [SCSI] bnx2fc: IO completion not processed due to missed wakeup [SCSI] qla4xxx: Update driver version to 5.02.00-k6 [SCSI] qla4xxx: masking required bits of add_fw_options during initialization [SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices [SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param [SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter [SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed [SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter [SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN [SCSI] qla4xxx: cleanup DDB relogin logic during initialization [SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed [SCSI] qla4xxx: Do not send mbox command if FW is in failed state [SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list() [SCSI] ses: add subenclosure support [SCSI] bnx2fc: Bump version to 1.0.1 [SCSI] bnx2fc: Remove unnecessary module state checks [SCSI] bnx2fc: Fix MTU issue by using static MTU ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb: add usage string of 'per_cpu' command kgdb,x86_64: fix compile warning found with sparse kdb: code cleanup to use macro instead of value kgdboc,kgdbts: strlen() doesn't count the terminator
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Disable ASPM when _OSC control is not granted for PCIe services PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs PCI: PCIe links may not get configured for ASPM under POWERSAVE mode PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: (30 commits) bq20z75: Fix time and temp units bq20z75: Fix issues with present and suspend z2_battery: Fix count of properties s3c_adc_battery: Fix method names when PM not set z2_battery: Add MODULE_DEVICE_TABLE ds2782_battery: Add MODULE_DEVICE_TABLE bq20z75: Add MODULE_DEVICE_TABLE power_supply: Update power_supply_is_watt_property bq20z75: Add i2c retry mechanism bq20z75: Add optional battery detect gpio twl4030_charger: Make the driver atomic notifier safe bq27x00: Use single i2c_transfer call for property read bq27x00: Cleanup bq27x00_i2c_read bq27x00: Minor cleanups bq27x00: Give more specific reports on battery status bq27x00: Add MODULE_DEVICE_TABLE bq27x00: Add new properties bq27x00: Poll battery state bq27x00: Cache battery registers bq27x00: Add bq27000 support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm stripe: implement merge method dm mpath: allow table load with no priority groups dm mpath: fail message ioctl if specified path is not valid dm ioctl: add flag to wipe buffers for secure data dm ioctl: prepare for crypt key wiping dm crypt: wipe keys string immediately after key is set dm: add flakey target dm: fix opening log and cow devices for read only tables
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc2005 - fix locking issue Input: tsc2005 - use relative jiffies to schedule the watchdog Input: tsc2005 - driver should depend on GENERIC_HARDIRQS
-
Linus Torvalds authored
Merge branch 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits) genirq: Expand generic show_interrupts() gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler gpio: Cleanup genirq namespace arm: ep93xx: Add basic interrupt info arm/gpio: Remove three copies of broken and racy debug code xtensa: Use generic show_interrupts() xtensa: Convert genirq namespace xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED xtensa: Convert s6000 gpio irq_chip to new functions xtensa: Convert main irq_chip to new functions um: Use generic show_interrupts() um: Convert genirq namespace m32r: Use generic show_interrupts() m32r: Convert genirq namespace h8300: Use generic show_interrupts() h8300: Convert genirq namespace avr32: Cleanup eic_set_irq_type() avr32: Use generic show_interrupts() avr: Cleanup genirq namespace avr32: Use generic IRQ config, enable GENERIC_HARDIRQS_NO_DEPRECATED ... Fix up trivial conflict in drivers/gpio/timbgpio.c
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched, doc: Update sched-design-CFS.txt sched: Remove unused 'rq' variable and cpu_rq() call from alloc_fair_sched_group() sched.h: Fix a typo ("its") sched: Fix yield_to kernel-doc
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows perf symbols: Look at .dynsym again if .symtab not found perf build-id: Add quirk to deal with perf.data file format breakage perf session: Pass evsel in event_ops->sample() perf: Better fit max unprivileged mlock pages for tools needs perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx() perf top: Fix uninitialized 'counter' variable tracing: Fix set_ftrace_filter probe function display perf, x86: Fix Intel fixed counters base initialization
-
Linus Torvalds authored
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Provide locked setter for chip, handler, name genirq: Provide a lockdep helper genirq; Remove the last leftovers of the old sparse irq code
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix WARN_ON() test for UP WARN_ON_SMP(): Allow use in if() statements on UP x86, dumpstack: Use %pB format specifier for stack trace vsprintf: Introduce %pB format specifier lockdep: Remove unused 'factor' variable from lockdep_stats_show()
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: DT: Cleanup namespace and call irq_set_irq_type() unconditional x86: DT: Fix return condition in irq_create_of_mapping() x86, mpparse: Move check_slot into CONFIG_X86_IO_APIC context
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: merge m68k and m68knommu arch directories
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fix multiple RTC detections on SUN4D
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cmpxchg: implement cmpxchg64() [S390] xchg/cmpxchg: move to own header file [S390] ccwgroup_driver: remove duplicate members [S390] ccw_bus_type: make it static [S390] ccw_driver: remove duplicate members [S390] qdio: prevent handling of buffers if count is zero [S390] setup: register bss section as resource [S390] setup: simplify setup_resources() [S390] wire up sys_syncfs [S390] wire up sys_clock_adjtime [S390] wire up sys_open_by_handle_at [S390] wire up sys_name_to_handle_at [S390] oprofile: disable hw sampling for CONFIG_32BIT [S390] early: limit savesys cmd string handling [S390] early: Fix possible overlapping data buffer
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (49 commits) MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board MIPS: JZ4740: qi_lb60: Add gpio-charger device MIPS: Wire up syncfs(2). MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls. MIPS: VR41xx: Convert to new irq_chip functions MIPS: TXx9: Convert to new irq_chip functions MIPS: SNI: Convert to new irq_chip functions MIPS: Sibyte: Convert to new irq_chip functions MIPS: IP32: Convert to new irq_chip functions MIPS: IP27: Convert to new irq_chip functions MIPS: IP22/IP28: Convert to new irq_chip functions MIPS: RB532: Convert to new irq_chip functions MIPS: PowerTV: Convert to new irq_chip functions MIPS: PNX8550: Convert to new irq_chip functions MIPS: PNX83xx: Convert to new irq_chip functions MIPS: msp71xx: Convert to new irq_chip functions MIPS: Loongson: Convert to new irq_chip functions MIPS: Use generic show_interrupts() MIPS: SMTC: Cleanup the hook mess and use irq_data MIPS: SMTC: Use irq_data in smtc_forward_irq() ...
-
Xiaotian Feng authored
commit b515498f ("userns: add a user namespace owner of ipc ns") added a user namespace owner of ipc ns, but it also introduced a use after free in free_ipc_ns(). Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Acked-by: "Serge E. Hallyn" <serge.hallyn@canonical.com> Acked-by: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rakib Mullick authored
Commit 0bc825d2 ("codafs: fix compile warning when CONFIG_SYSCTL=n") introduces build breakage, when CONFIG_PROC_SYSCTL=n and CONFIG_CODA_FS=y: fs/built-in.o: In function `init_coda': psdev.c:(.init.text+0xc02): undefined reference to `coda_sysctl_init' psdev.c:(.init.text+0xc7c): undefined reference to `coda_sysctl_clean' fs/built-in.o: In function `exit_coda': psdev.c:(.exit.text+0xa9): undefined reference to `coda_sysctl_clean' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Reported-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Maxim Levitsky authored
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Alex Dubov <oakad@yahoo.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Mar, 2011 4 commits
-
-
Namhyung Kim authored
Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
-
Jason Wessel authored
Fix sparse warning: arch/x86/kernel/kgdb.c:123:9: warning: switch with no cases Reported-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
-
Jovi Zhang authored
It's better to use macro KDB_BASE_CMD_MAX instead of 50 Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
-
Dan Carpenter authored
This is an off by one because strlen() doesn't count the null terminator. We strcpy() these strings into an array of size MAX_CONFIG_LEN. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
-