- 28 Apr, 2008 8 commits
-
-
Lennert Buytenhek authored
Unify a couple more spellings of "PCIe" ("PCI-E", "PCIE".) Signed-off-by:Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
Nicolas Pitre <nico@marvell.com>
-
Lennert Buytenhek authored
End addresses in 'struct resource' are inclusive -- fix the common orion5x code to pass in the proper end addresses when instantiating the two on-chip EHCI controllers. Signed-off-by:
-
Lennert Buytenhek authored
The current orion5x board ->map_irq() routines check whether a given bus number lives on the PCIe controller by comparing it with the PCIe controller's primary bus number. This doesn't work in case there are multiple buses in the PCIe domain, i.e. if there exists a PCIe bridge on the primary PCIe bus. This patch adds a helper function (orion5x_pci_map_irq()) that returns the IRQ number for the given PCI device if that device has a hard-wired IRQ, or -1 otherwise, and makes each board's ->map_irq() function use this helper function. Signed-off-by:
-
Nicolas Pitre authored
The ioremap() optimization used for internal register didn't cope with the fact that paddr + size can wrap to zero if the area extends to the end of the physical address space. Issue isolated by Sylver Bruneau <sylver.bruneau@googlemail.com>. Signed-off-by: -
Lennert Buytenhek authored
Since the Feroceon cache replacement policy is always pseudorandom (and the relevant control register bit is ignored), remove the CONFIG_CPU_CACHE_ROUND_ROBIN check from proc-feroceon.S. Signed-off-by:
-
Lennert Buytenhek authored
Since the Feroceon doesn't have a global WT override bit like ARM926 does, remove all code relating to this mode of operation from proc-feroceon.S. Signed-off-by:
-
Lennert Buytenhek authored
The ARM kprobes arithmetic immediate instruction decoder (space_cccc_001x()) was accidentally zero'ing out not only the Rn and Rd arguments, but the lower nibble of the immediate argument as well -- this patch fixes this. Signed-off-by:
-
Nicolas Pitre authored
It is more useful to flush the cache with the actual buffer address rather than the address containing a pointer to the buffer. Signed-off-by:
-
- 24 Apr, 2008 32 commits
-
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (80 commits) SUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request make nfs_automount_list static NFS: remove duplicate flags assignment from nfs_validate_mount_data NFS - fix potential NULL pointer dereference v2 SUNRPC: Don't change the RPCSEC_GSS context on a credential that is in use SUNRPC: Fix a race in gss_refresh_upcall() SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requests SUNRPC: Remove the unused export of xprt_force_disconnect SUNRPC: remove XS_SENDMSG_RETRY SUNRPC: Protect creds against early garbage collection NFSv4: Attempt to use machine credentials in SETCLIENTID calls NFSv4: Reintroduce machine creds NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid() nfs: fix printout of multiword bitfields nfs: return negative error value from nfs{,4}_stat_to_errno NLM/lockd: Ensure client locking calls use correct credentials NFS: Remove the buggy lock-if-signalled case from do_setlk() NLM/lockd: Fix a race when cancelling a blocking lock NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call NLM: Remove the signal masking in nlmclnt_proc/nlmclnt_cancel ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-linus' of git://linux-nfs.org/~bfields/linux: (52 commits) knfsd: clear both setuid and setgid whenever a chown is done knfsd: get rid of imode variable in nfsd_setattr SUNRPC: Use unsigned loop and array index in svc_init_buffer() SUNRPC: Use unsigned index when looping over arrays SUNRPC: Update RPC server's TCP record marker decoder SUNRPC: RPC server still uses 2.4 method for disabling TCP Nagle NLM: don't let lockd exit on unexpected svc_recv errors (try #2) NFS: don't let nfs_callback_svc exit on unexpected svc_recv errors (try #2) Use a zero sized array for raw field in struct fid nfsd: use static memory for callback program and stats SUNRPC: remove svc_create_thread() nfsd: fix comment lockd: Fix stale nlmsvc_unlink_block comment NFSD: Strip __KERNEL__ testing from unexported header files. sunrpc: make token header values less confusing gss_krb5: consistently use unsigned for seqnum NFSD: Remove NFSv4 dependency on NFSv3 SUNRPC: Remove PROC_FS dependency NFSD: Use "depends on" for PROC_FS dependency nfsd: move most of fh_verify to separate function ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (452 commits) V4L/DVB (7731): tuner-xc2028: fix signal strength calculus V4L/DVB (7730): tuner-xc2028: Fix SCODE load for MTS firmwares V4L/DVB (7729): Fix VIDIOCGAP corruption in ivtv V4L/DVB (7728): tea5761: bugzilla #10462: tea5761 autodetection code were broken V4L/DVB (7726): cx23885: Enable cx23417 support on the HVR1800 V4L/DVB (7725): cx23885: Add generic cx23417 hardware encoder support V4L/DVB (7723): pvrusb2: Clean up input selection list generation in V4L interface V4L/DVB (7722): pvrusb2: Implement FM radio support for Gotview USB2.0 DVD 2 V4L/DVB (7721): pvrusb2: Restructure cx23416 firmware loading to have a common exit point V4L/DVB (7720): pvrusb2: Fix bad error code on cx23416 firmware load failure V4L/DVB (7719): pvrusb2: Implement input selection enforcement V4L/DVB (7718): pvrusb2-dvb: update Kbuild selections V4L/DVB (7717): pvrusb2-dvb: add DVB-T support for Hauppauge pvrusb2 model 73xxx V4L/DVB (7716): pvrusb2: clean up global functions V4L/DVB (7715): pvrusb2: Clean out all use of __FUNCTION__ V4L/DVB (7714): pvrusb2: Fix hang on module removal V4L/DVB (7713): pvrusb2: Implement cleaner DVB kernel thread shutdown V4L/DVB (7712): pvrusb2: Close connect/disconnect race V4L/DVB (7711): pvrusb2: Fix race on module unload V4L/DVB (7710): pvrusb2: Implement critical digital streaming quirk for onair devices ...
-
Trond Myklebust authored
-
Trond Myklebust authored
RFC 2203 requires the server to drop the request if it believes the RPCSEC_GSS context is out of sequence. The problem is that we have no way on the client to know why the server dropped the request. In order to avoid spinning forever trying to resend the request, the safe approach is therefore to always invalidate the RPCSEC_GSS context on every major timeout. Signed-off-by:Trond Myklebust <Trond.Myklebust@netapp.com>
-
Mauro Carvalho Chehab authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
There are different tables for MTS firmwares. This should be taken into account while selecting the proper firmware. While at tuner-xc2028.h, improve some comments. Thanks to Edward J. Sheldrake <ejs1920@yahoo.co.uk> for helping to diagnose such troubles with PAL/I standard. Signed-off-by: -
Alan Cox authored
Frank Bennett reported that ivtv was causing skype to crash. With help from one of their developers he showed it was a kernel problem. VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names that are too long and does not truncate them so corrupts a few bytes of the app data area. Possibly the names also want trimming but for now this should fix the corruption case. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Steven Toth authored
cx23885: Enable cx23417 support on the HVR1800 Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Steven Toth authored
cx23885: Add generic cx23417 hardware encoder support. Signed-off-by:
-
Mike Isely authored
Change how list of possible pvrusb2 inputs is generated to include only those interfaces that make sense for the interface instance. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have Signed-off-by: -
Michael Krufky authored
These changes are required with the addition of digital television support for the Hauppauge HVR1900 & HVR1950, the OnAir Creator and Sasem USB HDTV Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Adrian Bunk authored
This patch contains the following cleanups: - make the following needlessly global function static: - pvr2_hdw_set_cur_freq() - #if 0 the following unused global functions: - pvr2_hdw_get_state_name() - pvr2_hdw_get_debug_info_unlocked() - pvr2_hdw_get_debug_info_locked() Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Mike Isely authored
Apparently the kernel developers no longer consider it proper etiquette to use __FUNCTION__; everyone must instead use __func__ (even though it breaks with older compilers). And worse still, actual effort is being expended to sweep this change throughout the kernel source tree. Don't these people have better things to do? So... Completely clean out all use of __FUNCTION__ from the pvrusb2 driver (it was just in the sysfs interface). I'm not going to use __func__ either. So there. Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver was getting had by this scenario: 1. Task A calls kthread_stop() for task B. 2. Before exiting, then Task B calls kthread_stop() for task C. The problem is, kthread_stop() wants to allocate an internal resource to itself (i.e. acquire a lock), which won't be released until kthread_stop() returns. But kthread_stop() won't return until task B is dead. But task B won't die until it finishes its call to kthread_stop() for task C, and that will block waiting on the resource already allocated inside task A. Deadlock. With the pvrusb2 driver, task A is the caller to pvr_exit(), task B is the control thread run inside of pvrusb2-context.c, and task C is any worker thread run inside of pvrusb2-hdw.c. This problem got introduced by the previous threading setup change, which was itself an attempt to fix a module tear-down race (which it actually did fix). The lesson here is that a task being waited on as part of a kthread_stop() simply cannot be allow to also issue a kthread_stop() - or we make sure not to issue the enclosing kthread_stop() until we know that the inner kthread_stop() has completed first. The solution for the pvrusb2 driver is some hackish code which changes the main control thread tear down into a two step process. This then makes it possible to delay issuing the kthread_stop() on the control thread until after we know that everything has been torn down first. (And yes, we really need that kthread_stop() because it's the only way to safely guarantee that a module-referencing kernel thread has safely returned back out of the module before we finally remove the module.) Signed-off-by:
-
Mike Isely authored
Earlier fix to handle DVB feed thread aborts was overly-aggressive. We can take better advantage of what kthread_stop() can do. This change simplifies things. Signed-off-by:
-
Mike Isely authored
If a disconnect happens before initialization is completed, the pvrusb2 driver can accidentally touch dangling pointers. The whole initialization function must be protected by the big_lock, and once inside that lock, the initialization function should abort if it is discovered that a disconnect has already taken place. Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver - for basically forever - was not enforcing a proper module tear-down. Kernel threads are used inside the driver and all must be gone before the module can be safely removed. This changeset reimplements a chunk of pvrusb2-context.c to enforce this correctly. Unfortunately this is not a simple fix. The new implementation also cuts back on kernel thread usage; instead of there being 1 control thread per instance now it's just 1 control thread shared by all instances. (By dropping to a single thread then the module exit function can block on its shutdown and the thread itself can monitor and cleanly shut down all of the other instances first.) Signed-off-by:
-
Mike Isely authored
Implement timed measurement of encoder operation for the first time it is run. This allows the driver to note when the encoder has been run successfully for at least 1/4 second. On top of that implement various bits to ensure that the encoder has been run once before digital streaming for OnAir devices. This is done via several core state machine tweaks. Signed-off-by:
-
Mike Isely authored
Some tuners seem to not work in digital mode unless the encoder is healthy. Implement a device attribute to represent this flag and modify the core state machines to enforce this requirement. Signed-off-by:
-
Mike Isely authored
If the device fails to stream, the feed thread will block forever waiting for buffers. But while in this state it was not looking for an exit condition from the driver DVB interface. This caused the thread to jam. Implement a new stop flag (which will be set appropriately) to tell the thread to stop. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Mike Isely authored
When the DVB interface is not compiled, the pvr2_dvb_props struct is not available - so it really should be ifdef'ed out as well. This didn't cause an error because in this context its usage was as an opaque pointer. But it really shouldn't be present at all if DVB is not enabled. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
