- 17 Dec, 2012 39 commits
-
-
Josef Bacik authored
If we've written to a prealloc extent we need to know the original block len for the extent. We can't figure this out currently since ->block_len is just set to the extent length. So introduce ->orig_block_len so that we know how many bytes were in the original extent for proper extent logging that future patches will need. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
The tree logging stuff needs the csums to be on the ordered extents in order to log them properly, so mark that we're sync and inline the csum creation so we don't have to wait on the csumming to be done when logging extents that are still in flight. Thanks, Signed-off-by:
-
Josef Bacik authored
We don't copy inode items anwyay, we just copy them straight into the log from the in memory inode. So if we know we're only logging the inode, don't bother dropping anything, just try to insert it and either if it succeeds or we get EEXIST we can update the inode item in the log and carry on. Thanks, Signed-off-by:
-
Josef Bacik authored
Currently we copy all the file information into the log, inode item, the refs, xattrs etc. Except most of this doesn't change from fsync to fsync, just the inode item changes. So set a flag if an xattr changes or a link is added, and otherwise only log the inode item. Thanks, Signed-off-by:
-
Anand Jain authored
Originally root_times_lock was introduced as part of send/receive code however newly developed patch to label the subvol reused the same lock, so renaming it for a meaningful name. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Lukas Czerner authored
Currently udev does not know about the device being removed from the file system. This may result in the situation where we're unable to mount the file system by UUID or by LABEL because the by-uuid and by-label links may still point to the device which is no longer part of the btrfs file system and hence does not have any btrfs super block. It can be easily reproduced by the following: mkfs.btrfs -L bugfs /dev/loop[0-6] mount /dev/loop0 /mnt/test btrfs device delete /dev/loop0 /mnt/test umount /mnt/test mount LABEL=bugfs /mnt/test <---- this fails then see: ls -l /dev/disk/by-label/bugfs which will still point to the /dev/loop0 We did not noticed this before because libblkid would send the udev event for us when it notice that the link does not fit the reality, however it does not do that anymore and completely relies on udev information. Fix this by sending the KOBJ_CHANGE event to the bdev kobject after successful device removal. Note that this does not affect device addition, because we will open the device prior the addition from userspace and udev will notice that and reread the device afterwards. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Miao Xie authored
ret variant may be set to 0 if we read page successfully, but it might be released before we lock it again. On this case, if we fail to allocate a new page, we will return 0, it is wrong, fix it. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Miao Xie authored
Since we can pre-allocate the space past EOF, we should be able to reclaim that space if we need. This patch implements it by removing the EOF check. Though the manual of fallocate command says we can use truncate command to reclaim the pre-allocated space which past EOF, but because truncate command changes the file size, we must run several commands to reclaim the space if we don't want to change the file size, so it is not a good choice. Signed-off-by:
-
Miao Xie authored
Steps to reproduce: # mkfs.btrfs <disk> # mount <disk> <mnt> # dd if=/dev/zero of=<mnt>/<file> bs=512 seek=5 count=8 # fallocate -p -o 2048 -l 16384 <mnt>/<file> # dd if=/dev/zero of=<mnt>/<file> bs=4096 seek=3 count=8 conv=notrunc,nocreat # umount <mnt> # dmesg WARNING: at fs/btrfs/inode.c:7140 btrfs_destroy_inode+0x2eb/0x330 The reason is that we inputed a range which is beyond the end of the file. And because the end of this range was not page-aligned, we had to truncate the last page in this range, this operation is similar to a buffered file write. In other words, we reserved enough space and clear the data which was in the hole range on that page. But when we expanded that test file, write the data into the same page, we forgot that we have reserved enough space for the buffered write of that page because in most cases there is no page that is beyond the end of the file. As a result, we reserved the space twice. In fact, we needn't truncate the page if it is beyond the end of the file, just release the allocated space in that range. Fix the above problem by this way. Signed-off-by:
-
Miao Xie authored
(start + len) is the start of the adjacent extent, not the end of the current extent, so we should not use it to check the hole is on the same page or not. Signed-off-by:
-
Miao Xie authored
We forget to release the reserved space in the error path of delalloc reservatiom, fix it. Signed-off-by:
-
Miao Xie authored
If we runt the direct IO, we should not run auto defrag, because it may introduce buffered IO vs direcIO problem, and make direct IO slow down. Signed-off-by:
-
Liu Bo authored
Value 0 is not a tree id, so besides an upper limit, a lower limit is necessary as well while parsing root types of tracepoint. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Wang Sheng-Hui authored
We should use ctl->unit for free space calculation instead of block_group->sectorsize even though for free space use_bitmap or free space cluster we only have sectorsize assigned to ctl->unit currently. Also, we can keep it consisten in code style. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
-
Filipe Brandenburger authored
Refactor it by checking whether the inode has been created and needs to be dropped (drop_inode_on_err) and also if the err variable is set. That way the variable doesn't need to be set on each and every error handling block. Signed-off-by:
Filipe Brandenburger <filbranden@google.com> Signed-off-by:
-
Filipe Brandenburger authored
When a new file is created with btrfs_create(), the inode will initially be created with permissions 0666 and later on in btrfs_init_acl() it will be adapted to mask out the umask bits. The problem is that this change won't make it into the btrfs_inode unless there's another change to the inode (e.g. writing content changing the size or touching the file changing the mtime.) This fix adds a call to btrfs_update_inode() to btrfs_create() to make sure that the change will not get lost if the in-memory inode is flushed before other changes are made to the file. Signed-off-by:
-
Tsutomu Itoh authored
When the flag not supported is specified, it is necessary to return the error to the caller. So, we add the validity check of the fiemap's flag. Signed-off-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
-
Liu Bo authored
Passing a null extended attribute value means to remove the attribute, but we don't have to add a new NULL extended attribute. Signed-off-by:
-
Liu Bo authored
If the acl can be exactly represented in the traditional file mode permission bits, we don't set another acl attribute. Signed-off-by:
-
Miao Xie authored
alloc_end is not the real end of the current extent, it is the start of the next adjoining extent. So we needn't +1 when calculating the size the space that is about to be reserved. Signed-off-by:
-
Miao Xie authored
The kernel developers have implemented some often-used align macros, we should use them instead of the complex code. Signed-off-by:
-
Stefan Behrens authored
This regression was introduced by the device-replace patches. Scrub immediately stops checking those disks that have write errors. This is nothing that happens in the real world, but it is wrong since scrub is the tool to detect and repair defects. Fix it. Signed-off-by:
Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by:
-
Stefan Behrens authored
This issue was detected by the "0-DAY kernel build testing". fs/btrfs/volumes.c: In function 'btrfs_rm_device': fs/btrfs/volumes.c:1505:1: warning: label 'error_close' defined but not used [-Wunused-label] Signed-off-by:
-
Stefan Behrens authored
The structure member mirror_num is modified concurrently to the structure member is_iodone. This doesn't require any locking by design, unless everything is stored in the same 32 bits of a bit field. This was the case and xfstest 284 was able to trigger false warnings from the checker code. This patch seperates the bits and fixes the race. Signed-off-by:
-
Miao Xie authored
If we freeze the fs, the auto defragment should not run. Fix it. Signed-off-by:
-
Miao Xie authored
This patch restructure btrfs_run_defrag_inodes() and make the code of the auto defragment more readable. Signed-off-by:
-
Miao Xie authored
We forget to get the defrag lock when we re-add the defragable inode, Fix it. Signed-off-by:
-
Miao Xie authored
The auto defrag allocation is in the fast path of the IO, so use slabs to improve the speed of the allocation. And besides that, it can do check for leaked objects when the module is removed. Signed-off-by:
-
Miao Xie authored
We need get write access for qgroup operations, or we will modify the R/O fs. Signed-off-by:
-
Miao Xie authored
We need get write access for scrub, or we will modify the R/O fs. Signed-off-by:
-
Miao Xie authored
Steps to reproduce: # mkfs.btrfs -d single -m single <disk0> <disk1> # mount -o ro <disk0> <mnt0> # mount -o ro <disk0> <mnt1> # mount -o remount,rw <mnt0> # umount <mnt0> # btrfs device delete <disk1> <mnt1> We can remove a device from a R/O filesystem. The reason is that we just check the R/O flag of the super block object. It is not enough, because the kernel may set the R/O flag only for the mount point. We need invoke mnt_want_write_file() to do a full check. Signed-off-by:
-
Miao Xie authored
Steps to reproduce: # mkfs.btrfs <partition> # mount -o ro <partition> <mnt0> # mount -o ro <partition> <mnt1> # mount -o remount,rw <mnt0> # umount <mnt0> # btrfs fi resize 10g <mnt1> We re-sized a R/O filesystem. The reason is that we just check the R/O flag of the super block object. It is not enough, because the kernel may set the R/O flag only for the mount point. We need invoke mnt_want_write_file() to do a full check. Signed-off-by:
-
Miao Xie authored
When wen want to set the default subvolume, we must get write access, or we will change the R/O file system. Signed-off-by:
-
Miao Xie authored
If the id of the existed transaction is more than the one we specified, it means the specified transaction was commited, so we should return 0, not EINVAL. Signed-off-by:
-
Miao Xie authored
If there is no running transaction in the fs, we needn't start a new one when we want to start sync. Signed-off-by:
-
Miao Xie authored
Since we have gotten the root in the caller, just pass it into btrfs_ioctl_{start, wait}_sync() directly. Signed-off-by: -
Liu Bo authored
If we found an invalid xattr dir item, we'd better try the next one instead. Signed-off-by:
-
Wang Sheng-Hui authored
io_ctl_map_page is called by many functions in free-space-cache. In most scenarios, the ->cur is not null, e.g. io_ctl_add_entry. I think we'd better remove the warn_on here. Signed-off-by:
-
Stefan Behrens authored
This is the commit that allows to start the device replace procedure. An ioctl() interface is added that supports starting and canceling the device replace procedure, and to retrieve the status and progress. Signed-off-by:
-
- 12 Dec, 2012 1 commit
-
-
Stefan Behrens authored
Make the target disk of a running device replace operation available for reading. This is only used as a last ressort for the defect repair procedure. And it is dependent on the location of the data block to read, because during an ongoing device replace operation, the target drive is only partially filled with the filesystem data. Signed-off-by:
-
