All RDMA ULPs should be using rdma_get_gid_attr instead of
ib_query_gid. Convert SMC to use the new API.

In the process correct some confusion with gid_type - if attr->ndev is
!NULL then gid_type can never be IB_GID_TYPE_IB by
definition. IB_GID_TYPE_ROCE shares the same enum value and is probably
what was intended here.
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma.git merge resolution for the 4.19 merge window

Conflicts:
 drivers/infiniband/core/rdma_core.c
   - Use the rdma code and revise with the new spelling for
     atomic_fetch_add_unless
 drivers/nvme/host/rdma.c
   - Replace max_sge with max_send_sge in new blk code
 drivers/nvme/target/rdma.c
   - Use the blk code and revise to use NULL for ib_post_recv when
     appropriate
   - Replace max_sge with max_recv_sge in new blk code
 net/rds/ib_send.c
   - Use the net code and revise to use NULL for ib_post_recv when
     appropriate
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This reverts commit ddb457c6.

The include rdma/ib_cache.h is kept, and we have to add a memset
to the compat wrapper to avoid compiler warnings in gcc-7

This revert is done to avoid extensive merge conflicts with SMC
changes in netdev during the 4.19 merge window.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Resolve merge conflicts from the -rc cycle against the rdma.git tree:

Conflicts:
 drivers/infiniband/core/uverbs_cmd.c
  - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
  - Merge removal of file->ucontext in for-next with new code in -rc
 drivers/infiniband/core/uverbs_main.c
  - for-next removed code from ib_uverbs_write() that was modified
    in for-rc
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Pull orangefs updates from Mike Marshall:
 "Orangefs: one cleanup and Souptick's vm_fault_t patch:

   - add new return type vm_fault_t (Souptick Joarder)

   - remove redundant pointer (Colin Ian King)"

* tag 'for-linus-4.19-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: remove redundant pointer orangefs_inode
  orangefs: Adding new return type vm_fault_t

Pull VFIO updates from Alex Williamson:

 - mark switch fall-through cases (Gustavo A. R. Silva)

 - disable binding SR-IOV enabled PFs (Alex Williamson)

* tag 'vfio-v4.19-rc1' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Disable binding to PFs with SR-IOV enabled
  vfio: Mark expected switch fall-throughs

Pull thermal management updates from Eduardo Valentin:

 - rework tsens driver to add support for tsens-v2 (Amit Kucheria)

 - rework armada thermal driver to use syscon and multichannel support
   (Miquel Raynal)

 - fixes to TI SoC, IMX, Exynos, RCar, and hwmon drivers

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (34 commits)
  thermal: armada: fix copy-paste error in armada_thermal_probe()
  thermal: rcar_thermal: avoid NULL dereference in absence of IRQ resources
  thermal: samsung: Remove Exynos5440 clock handling left-overs
  thermal: tsens: Fix negative temperature reporting
  thermal: tsens: switch from of_iomap() to devm_ioremap_resource()
  thermal: tsens: Rename variable
  thermal: tsens: Add generic support for TSENS v2 IP
  thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
  thermal: tsens: Add support to split up register address space into two
  dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
  thermal: tsens: Get rid of unused fields in structure
  thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info
  thermal_hwmon: Sanitize attribute name passed to hwmon
  dt-bindings: thermal: armada: add reference to new bindings
  dt-bindings: cp110: add the thermal node in the syscon file
  dt-bindings: cp110: update documentation since DT de-duplication
  dt-bindings: ap806: add the thermal node in the syscon file
  dt-bindings: cp110: prepare the syscon file to list other syscons nodes
  dt-bindings: ap806: prepare the syscon file to list other syscons nodes
  dt-bindings: cp110: rename cp110 syscon file
  ...

Pull mailbox updates from Jassi Brar:

 - xgene: potential null pointer fix

 - omap: switch to spdx license and use of_device_get_match_data() to
   match data

 - ti-msgmgr: cleanup and optimisation. New TI specific feature - secure
   proxy thread.

 - mediatek: add driver for CMDQ controller.

 - nxp: add driver for MU controller

* tag 'mailbox-v4.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Add support for i.MX messaging unit
  dt-bindings: mailbox: imx-mu: add generic MU channel support
  dt-bindings: arm: fsl: add mu binding doc
  mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.c
  mailbox: mediatek: Add Mediatek CMDQ driver
  dt-bindings: soc: Add documentation for the MediaTek GCE unit
  mailbox: ti-msgmgr: Add support for Secure Proxy
  dt-bindings: mailbox: Add support for secure proxy threads
  mailbox: ti-msgmgr: Move the memory region name to descriptor
  mailbox: ti-msgmgr: Change message count mask to be descriptor based
  mailbox: ti-msgmgr: Allocate Rx channel resources only on request
  mailbox: ti-msgmgr: Get rid of unused structure members
  mailbox/omap: use of_device_get_match_data() to get match data
  mailbox/omap: switch to SPDX license identifier
  mailbox: xgene-slimpro: Fix potential NULL pointer dereference

The split of .system_keyring into .builtin_trusted_keys and
.secondary_trusted_keys broke kexec, thereby preventing kernels signed by
keys which are now in the secondary keyring from being kexec'd.

Fix this by passing VERIFY_USE_SECONDARY_KEYRING to
verify_pefile_signature().

Fixes: d3bfe841 ("certs: Add a secondary system keyring that can be added to dynamically")
Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace the use of a magic number that indicates that verify_*_signature()
should use the secondary keyring with a symbol.
Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity updates from James Morris:
 "This adds support for EVM signatures based on larger digests, contains
  a new audit record AUDIT_INTEGRITY_POLICY_RULE to differentiate the
  IMA policy rules from the IMA-audit messages, addresses two deadlocks
  due to either loading or searching for crypto algorithms, and cleans
  up the audit messages"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  EVM: fix return value check in evm_write_xattrs()
  integrity: prevent deadlock during digsig verification.
  evm: Allow non-SHA1 digital signatures
  evm: Don't deadlock if a crypto algorithm is unavailable
  integrity: silence warning when CONFIG_SECURITYFS is not enabled
  ima: Differentiate auditing policy rules from "audit" actions
  ima: Do not audit if CONFIG_INTEGRITY_AUDIT is not set
  ima: Use audit_log_format() rather than audit_log_string()
  ima: Call audit_log_string() rather than logging it untrusted

Pull TPM updates from James Morris:

 - Migrate away from PM runtime as explicit cmdReady/goIdle transactions
   for every command is a spec requirement. PM runtime adds only a layer
   of complexity on our case.

 - tpm_tis drivers can now specify the hwrng quality.

 - TPM 2.0 code uses now tpm_buf for constructing messages. Jarkko
   thinks Tomas Winkler has done the same for TPM 1.2, and will start
   digging those changes from the patchwork in the near future.

 - Bug fixes and clean ups

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: Get rid of ima_used_chip and use ima_tpm_chip != NULL instead
  ima: Use tpm_default_chip() and call TPM functions with a tpm_chip
  tpm: replace TPM_TRANSMIT_RAW with TPM_TRANSMIT_NESTED
  tpm: Convert tpm_find_get_ops() to use tpm_default_chip()
  tpm: Implement tpm_default_chip() to find a TPM chip
  tpm: rename tpm_chip_find_get() to tpm_find_get_ops()
  tpm: Allow tpm_tis drivers to set hwrng quality.
  tpm: Return the actual size when receiving an unsupported command
  tpm: separate cmd_ready/go_idle from runtime_pm
  tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
  tpm_tis_spi: Pass the SPI IRQ down to the driver
  tpm: migrate tpm2_get_random() to use struct tpm_buf
  tpm: migrate tpm2_get_tpm_pt() to use struct tpm_buf
  tpm: migrate tpm2_probe() to use struct tpm_buf
  tpm: migrate tpm2_shutdown() to use struct tpm_buf

Pull smack updates from James Morris:
 "Minor fixes from Piotr Sawicki"

* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Smack: Inform peer that IPv6 traffic has been blocked
  Smack: Check UDP-Lite and DCCP protocols during IPv6 handling
  Smack: Fix handling of IPv4 traffic received by PF_INET6 sockets

Pull jfs update from David Kleikamp:
 "Just one jfs patch for 4.19"

* tag 'jfs-4.19' of git://github.com/kleikamp/linux-shaggy:
  jfs: use time64_t for otime

Pull gfs2 updates from Andreas Gruenbacher:

 - iomap support for buffered writes and for direct I/O

 - two patches that reduce the size of struct gfs2_inode

 - lots of fixes and cleanups

* tag 'gfs2-4.19.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (25 commits)
  gfs2: eliminate update_rgrp_lvb_unlinked
  gfs2: Fix gfs2_testbit to use clone bitmaps
  gfs2: Get rid of gfs2_ea_strlen
  gfs2: cleanup: call gfs2_rgrp_ondisk2lvb from gfs2_rgrp_out
  gfs2: Special-case rindex for gfs2_grow
  GFS2: rgrp free blocks used incorrectly
  gfs2: remove redundant variable 'moved'
  gfs2: use iomap_readpage for blocksize == PAGE_SIZE
  gfs2: Use iomap for stuffed direct I/O reads
  gfs2: fallocate_chunk: Always initialize struct iomap
  GFS2: Fix recovery issues for spectators
  fs: gfs2: Adding new return type vm_fault_t
  gfs2: using posix_acl_xattr_size instead of posix_acl_to_xattr
  gfs2: Don't reject a supposedly full bitmap if we have blocks reserved
  gfs2: Eliminate redundant ip->i_rgd
  gfs2: Stop messing with ip->i_rgd in the rlist code
  gfs2: Remove gfs2_write_{begin,end}
  gfs2: iomap direct I/O support
  gfs2: gfs2_extent_length cleanup
  gfs2: iomap buffered write support
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
  hisi_sas, smartpqi, megaraid_sas, arcmsr.

  In addition, with the continuing absence of Nic we have target updates
  for tcmu and target core (all with reviews and acks).

  The biggest observable change is going to be that we're (again) trying
  to switch to mulitqueue as the default (a user can still override the
  setting on the kernel command line).

  Other major core stuff is the removal of the remaining Microchannel
  drivers, an update of the internal timers and some reworks of
  completion and result handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
  scsi: ufs: remove unnecessary query(DM) UPIU trace
  scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
  scsi: aacraid: Spelling fix in comment
  scsi: mpt3sas: Fix calltrace observed while running IO & reset
  scsi: aic94xx: fix an error code in aic94xx_init()
  scsi: st: remove redundant pointer STbuffer
  scsi: qla2xxx: Update driver version to 10.00.00.08-k
  scsi: qla2xxx: Migrate NVME N2N handling into state machine
  scsi: qla2xxx: Save frame payload size from ICB
  scsi: qla2xxx: Fix stalled relogin
  scsi: qla2xxx: Fix race between switch cmd completion and timeout
  scsi: qla2xxx: Fix Management Server NPort handle reservation logic
  scsi: qla2xxx: Flush mailbox commands on chip reset
  scsi: qla2xxx: Fix unintended Logout
  scsi: qla2xxx: Fix session state stuck in Get Port DB
  scsi: qla2xxx: Fix redundant fc_rport registration
  scsi: qla2xxx: Silent erroneous message
  scsi: qla2xxx: Prevent sysfs access when chip is down
  scsi: qla2xxx: Add longer window for chip reset
  ...

Pull clk updates from Stephen Boyd:
 "The new and exciting feature this time around is in the clk core.
  We've added duty cycle support to the clk API so that clk signal duty
  cycle ratios can be adjusted while taking into account things like clk
  dividers and clk tree hierarchy. So far only one SoC has implemented
  support for this, but I expect there will be more to come in the
  future.

  Outside of the core, we have the usual pile of clk driver updates and
  additions. The Amlogic meson driver got the most lines in the diffstat
  this time around because it added support for a whole bunch of
  hardware and duty cycle configuration. After that the Rockchip PX30,
  Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the
  diff. We're left with the collection of non-critical fixes after that.
  Overall it looks pretty quiet this time.

  Core:
   - Clk duty cycle support
   - Proper CLK_SET_RATE_GATE support throughout the tree

  New Drivers:
   - Actions Semi Owl series S700 SoC clk driver
   - Qualcomm SDM845 display clock controller
   - i.MX6SX ocram_s clk support
   - Uniphier NAND, USB3 PHY, and SPI clk support
   - Qualcomm RPMh clk driver
   - i.MX7D mailbox clk support
   - Maxim 9485 Programmable Clock Generator
   - expose 32 kHz PLL on PXA SoCs
   - imx6sll GPIO clk gate support
   - Atmel at91 I2S audio clk support
   - SI544/SI514 clk on/off support
   - i.MX6UL GPIO clock gates in CCM CCGR
   - Renesas Crypto Engine clocks on R-Car H3
   - Renesas clk support for the new RZ/N1D SoC
   - Allwinner A64 display engine clock support
   - support for Rockchip's PX30 SoC
   - Amlogic Meson axg PCIe and audio clocks
   - Amlogic Meson GEN CLK on gxbb, gxl and axg

  Updates:
   - remove an unused variable from Exynos4412 ISP driver
   - fix a thinko bug in SCMI clk division logic
   - add missing of_node_put()s in some i.MX clk drivers
   - Tegra SDMMC clk jitter improvements with high speed signaling modes
   - SPDX tagging for qcom and cs2000-cp drivers
   - stop leaking con ids in __clk_put()
   - fix a corner case in fixed factor clk probing where node is in DT
     but parent clk is registered much later
   - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return
     value
   - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
   - convert to CLK_IS_CRITICAL for i.MX51/53 driver
   - fix Tegra BPMP driver oops when xlating a NULL clk
   - proper default configuration for vic03 and vde clks on Tegra124
   - mark Tegra memory controller clks as critical
   - fix array bounds clamp in Tegra's emc determine_rate() op
   - Ingenic i2s bit update and allow UDC clk to gate
   - fix name of aspeed SDC clk define to have only one 'CLK'
   - fix i.MX6QDL video clk parent
   - critical clk markings for qcom SDM845
   - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
   - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it
     supplying the pwm used to drive the logic supply of the rk3399
     core"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits)
  clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
  clk: cs2000-cp: convert to SPDX identifiers
  clk: scmi: Fix the rounding of clock rate
  clk: qcom: Add display clock controller driver for SDM845
  clk: mvebu: armada-37xx-periph: Remove unused var num_parents
  clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable
  clk: actions: Add S700 SoC clock support
  dt-bindings: clock: Add S700 support for Actions Semi Soc's
  clk: actions: Add missing REGMAP_MMIO dependency
  clk: uniphier: add clock frequency support for SPI
  clk: uniphier: add more USB3 PHY clocks
  clk: uniphier: add NAND 200MHz clock
  clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  clk: tegra: Add sdmmc mux divider clock
  clk: tegra: Refactor fractional divider calculation
  clk: tegra: Fix includes required by fence_udelay()
  clk: imx6sll: fix missing of_node_put()
  clk: imx6ul: fix missing of_node_put()
  clk: imx: add ocram_s clock for i.mx6sx
  clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.19 kernel cycle.

  I don't know if anything in particular stands out. Maybe the Aspeed
  coprocessor thing from Benji: Aspeed is doing baseboard management
  chips (BMC's) for servers etc.

  These Aspeed's are ARM processors that exist inside (I guess) Intel
  servers, and they are moving forward to using mainline Linux in those.
  This is one of the pieces of the puzzle to achive that. They are doing
  OpenBMC, it's pretty cool: https://lwn.net/Articles/683320/

  Summary:

  Core changes:

   - Add a new API for explicitly naming GPIO consumers, when needed.

   - Don't let userspace set values on input lines. While we do not
     think anyone would do this crazy thing we better plug the hole
     before someone uses it and think it's a nifty feature.

   - Avoid calling chip->request() for unused GPIOs.

  New drivers/subdrivers:

   - The Mediatek MT7621 is supported which is a big win for OpenWRT and
     similar router distributions using this chip, as it seems every
     major router manufacturer on the planet has made products using
     this chip: https://wikidevi.com/wiki/MediaTek_MT7621

   - The Tegra 194 is now supported.

   - The IT87 driver now supports IT8786E and IT8718F super-IO chips.

   - Add support for Rockchip RK3328 in the syscon GPIO driver.

  Driver changes:

   - Handle the get/set_multiple() properly on MMIO chips with inverted
     direction registers. We didn't have this problem until a new chip
     appear that has get/set registers AND inverted direction bits, OK
     now we handle it.

   - A patch series making more error codes percolate upward properly
     for different errors on gpiochip_lock_as_irq().

   - Get/set multiple for the OMAP driver, accelerating these multiple
     line operations if possible.

   - A coprocessor interface for the Aspeed driver. Sometimes a few GPIO
     lines need to be grabbed by a co-processor for doing automated
     tasks, sometimes they are available as GPIO lines. By adding an
     explicit API in this driver we make it possible for the two line
     consumers to coexist. (This work was made available on the
     ib-aspeed branch, which may be appearing in other pull requests.)

   - Implemented .get_direction() and open drain in the SCH311x driver.

   - Continuing cleanup of included headers in GPIO drivers"

* tag 'gpio-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits)
  gpio: it87: Add support for IT8613
  gpio: it87: add support for IT8718F Super I/O.
  gpiolib: Avoid calling chip->request() for unused gpios
  gpio: tegra: Include the right header
  gpio: mmio: Fix up inverted direction registers
  gpio: xilinx: Use the right include
  gpio: timberdale: Include the right header
  gpio: tb10x: Use the right include
  gpiolib: Fix of_node inconsistency
  gpio: vr41xx: Bail out on gpiochip_lock_as_irq() error
  gpio: uniphier: Bail out on gpiochip_lock_as_irq() error
  gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: em: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: dwapb: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: bcm-kona: Don't shadow error code of gpiochip_lock_as_irq()
  gpiolib: Don't shadow error code of gpiochip_lock_as_irq()
  gpio: syscon: rockchip: add GRF GPIO support for rk3328
  gpio: omap: Add get/set_multiple() callbacks
  gpio: pxa: remove set but not used variable 'gpio_offset'
  gpio-it87: add support for IT8786E Super I/O
  ...

Pull EDAC updates from Borislav Petkov:

 - Add support for systems with PCI segmented buses to sb_edac, by
   Masayoshi Mizuma

 - The usual pile of fixes and cleanups

* tag 'edac_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, sb_edac: Add support for systems with segmented PCI buses
  EDAC, thunderx: Remove VLA usage
  EDAC, i7core: Fix memleaks and use-after-free on probe and remove
  EDAC: Fix memleak in module init error path
  EDAC, altera: Fix an error handling path in altr_s10_sdram_probe()

Pull random updates from Ted Ts'o:
 "Some changes to trust cpu-based hwrng (such as RDRAND) for
  initializing hashed pointers and (optionally, controlled by a config
  option) to initialize the CRNG to avoid boot hangs"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: Make crng state queryable
  random: remove preempt disabled region
  random: add a config option to trust the CPU's hwrng
  vsprintf: Add command line option debug_boot_weak_hash
  vsprintf: Use hw RNG for ptr_key
  random: Return nbytes filled from hw RNG
  random: Fix whitespace pre random-bytes work

Pull clang-format updates from Miguel Ojeda:
 "Two improvements for .clang-format:

   - Set IndentWrappedFunctionNames false (Jason Gunthorpe)

   - Add MAINTAINERS entry (Miguel Ojeda)"

* tag 'clang-format-for-linus-v4.19' of git://github.com/ojeda/linux:
  MAINTAINERS: Add .clang-format entry
  clang-format: Set IndentWrappedFunctionNames false

Pull auxdisplay updates from Miguel Ojeda:
 "Two cleanups for char_lcd:

   - simplify getting .drvdata (Wolfram Sang)

   - delete mdelay in long_sleep (Jia-Ju Bai)"

* tag 'auxdisplay-for-linus-v4.19' of git://github.com/ojeda/linux:
  auxdisplay: simplify getting .drvdata
  auxdisplay: charlcd: delete mdelay in long_sleep

Commit c647f806 ("ALSA: hda - Allow multiple ADCs for mic mute LED
controls") changed the return value of the snd_hda_gen_add_micmute_led()
without actually updating the callers.

Admittedly, almost no callers actually cared about the return value.
But one call site very much did: the Dell wmi code.  It would see the
registration return zero, which _used_ to mean "failed" but now means
"success", and clear the dell_micmute_led_set_func pointer.

End result: the successful registration would end up calling the Dell
code that thought it had all failed, and call through a NULL pointer.

To make matters worse, it ends up being a tail-call, and with the
retpoline sequence you don't even see the caller (dell_micmute_update())
in the stack trace, so the error ended up way less obvious than it
should have been.

Fixes: c647f806 "ALSA: hda - Allow multiple ADCs for mic mute LED controls"
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull media updates from Mauro Carvalho Chehab:

 - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x

 - new sensor drivers: ak7375, ov2680 and rj54n1cb0c

 - an old soc-camera sensor driver converted to the V4L2 framework:
   mt9v111

 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm

 - some cleanups at cx25821, removing legacy unused code

 - some improvements at ddbridge driver

 - new platform driver: vicodec

 - some DVB API cleanups, removing ioctls and compat code for old
   out-of-tree drivers that were never merged upstream

 - improvements at DVB core to support frontents that support both
   Satellite and non-satellite delivery systems

 - got rid of the unused VIDIOC_RESERVED V4L2 ioctl

 - some cleanups/improvements at gl861 ISDB driver

 - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645,
   and smiapp sensor drivers

 - fixes at em28xx to support dual TS devices

 - some cleanups at V4L2/VB2 locking logic

 - some API improvements at media controller

 - some cec core and drivers improvements

 - some uvcvideo improvements

 - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda,
   reneseas-ceu, imx, vsp1, venus, camss

 - lots of other cleanups and fixes

* tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits)
  Revert "media: vivid: shut up warnings due to a non-trivial logic"
  siano: get rid of an unused return code for debugfs register
  media: isp: fix a warning about a wrong struct initializer
  media: radio-wl1273: fix return code for the polling routine
  media: s3c-camif: fix return code for the polling routine
  media: saa7164: fix return codes for the polling routine
  media: exynos-gsc: fix return code if mutex was interrupted
  media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API
  media: xc4000: get rid of uneeded casts
  media: drxj: get rid of uneeded casts
  media: tuner-xc2028: don't use casts for printing sizes
  media: cleanup fall-through comments
  media: vivid: shut up warnings due to a non-trivial logic
  media: rtl28xxu: be sure that it won't go past the array size
  media: mt9v111: avoid going past the buffer
  media: vsp1_dl: add a description for cmdpool field
  media: sta2x11: add a missing parameter description
  media: v4l2-mem2mem: add descriptions to MC fields
  media: i2c: fix warning in Aptina MT9V111
  media: imx: shut up a false positive warning
  ...

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.19.

  Rob has some new hardware support for new qualcomm hw that I'll send
  along separately. This has the display part of it, the remaining pull
  is for the acceleration engine.

  This also contains a wound-wait/wait-die mutex rework, Peter has acked
  it for merging via my tree.

  Otherwise mostly the usual level of activity. Summary:

  core:
   - Wound-wait/wait-die mutex rework
   - Add writeback connector type
   - Add "content type" property for HDMI
   - Move GEM bo to drm_framebuffer
   - Initial gpu scheduler documentation
   - GPU scheduler fixes for dying processes
   - Console deferred fbcon takeover support
   - Displayport support for CEC tunneling over AUX

  panel:
   - otm8009a panel driver fixes
   - Innolux TV123WAM and G070Y2-L01 panel driver
   - Ilitek ILI9881c panel driver
   - Rocktech RK070ER9427 LCD
   - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
   - DLC DLC0700YZG-1
   - BOE HV070WSA-100
   - newhaven, nhd-4.3-480272ef-atxl LCD
   - DataImage SCF0700C48GGU18
   - Sharp LQ035Q7DB03
   - p079zca: Refactor to support multiple panels

  tinydrm:
   - ILI9341 display panel

  New driver:
   - vkms - virtual kms driver to testing.

  i915:
   - Icelake:
        Display enablement
        DSI support
        IRQ support
        Powerwell support
   - GPU reset fixes and improvements
   - Full ppgtt support refactoring
   - PSR fixes and improvements
   - Execlist improvments
   - GuC related fixes

  amdgpu:
   - Initial amdgpu documentation
   - JPEG engine support on VCN
   - CIK uses powerplay by default
   - Move to using core PCIE functionality for gens/lanes
   - DC/Powerplay interface rework
   - Stutter mode support for RV
   - Vega12 Powerplay updates
   - GFXOFF fixes
   - GPUVM fault debugging
   - Vega12 GFXOFF
   - DC improvements
   - DC i2c/aux changes
   - UVD 7.2 fixes
   - Powerplay fixes for Polaris12, CZ/ST
   - command submission bo_list fixes

  amdkfd:
   - Raven support
   - Power management fixes

  udl:
   - Cleanups and fixes

  nouveau:
   - misc fixes and cleanups.

  msm:
   - DPU1 support display controller in sdm845
   - GPU coredump support.

  vmwgfx:
   - Atomic modesetting validation fixes
   - Support for multisample surfaces

  armada:
   - Atomic modesetting support completed.

  exynos:
   - IPPv2 fixes
   - Move g2d to component framework
   - Suspend/resume support cleanups
   - Driver cleanups

  imx:
   - CSI configuration improvements
   - Driver cleanups
   - Use atomic suspend/resume helpers
   - ipu-v3 V4L2 XRGB32/XBGR32 support

  pl111:
   - Add Nomadik LCDC variant

  v3d:
   - GPU scheduler jobs management

  sun4i:
   - R40 display engine support
   - TCON TOP driver

  mediatek:
   - MT2712 SoC support

  rockchip:
   - vop fixes

  omapdrm:
   - Workaround for DRA7 errata i932
   - Fix mm_list locking

  mali-dp:
   - Writeback implementation
        PM improvements
   - Internal error reporting debugfs

  tilcdc:
   - Single fix for deferred probing

  hdlcd:
   - Teardown fixes

  tda998x:
   - Converted to a bridge driver.

  etnaviv:
   - Misc fixes"

* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
  drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
  drm/scheduler: fix param documentation
  drm/i2c: tda998x: correct PLL divider calculation
  drm/i2c: tda998x: get rid of private fill_modes function
  drm/i2c: tda998x: move mode_valid() to bridge
  drm/i2c: tda998x: register bridge outside of component helper
  drm/i2c: tda998x: cleanup from previous changes
  drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
  drm/i2c: tda998x: convert to bridge driver
  drm/scheduler: fix timeout worker setup for out of order job completions
  drm/amd/display: display connected to dp-1 does not light up
  drm/amd/display: update clk for various HDMI color depths
  drm/amd/display: program display clock on cache match
  drm/amd/display: Add NULL check for enabling dp ss
  drm/amd/display: add vbios table check for enabling dp ss
  drm/amd/display: Don't share clk source between DP and HDMI
  drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
  drm/amd/display: Use calculated disp_clk_khz value for dce110
  drm/amd/display: Implement custom degamma lut on dcn
  drm/amd/display: Destroy aux_engines only once
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Fix dcache flushing crash in skcipher.
   - Add hash finup self-tests.
   - Reschedule during speed tests.

  Algorithms:
   - Remove insecure vmac and replace it with vmac64.
   - Add public key verification for DH/ECDH.

  Drivers:
   - Decrease priority of sha-mb on x86.
   - Improve NEON latency/throughput on ARM64.
   - Add md5/sha384/sha512/des/3des to inside-secure.
   - Support eip197d in inside-secure.
   - Only register algorithms supported by the host in virtio.
   - Add cts and remove incompatible cts1 from ccree.
   - Add hisilicon SEC security accelerator driver.
   - Replace msm hwrng driver with qcom pseudo rng driver.

  Misc:
   - Centralize CRC polynomials"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (121 commits)
  crypto: arm64/ghash-ce - implement 4-way aggregation
  crypto: arm64/ghash-ce - replace NEON yield check with block limit
  crypto: hisilicon - sec_send_request() can be static
  lib/mpi: remove redundant variable esign
  crypto: arm64/aes-ce-gcm - don't reload key schedule if avoidable
  crypto: arm64/aes-ce-gcm - implement 2-way aggregation
  crypto: arm64/aes-ce-gcm - operate on two input blocks at a time
  crypto: dh - make crypto_dh_encode_key() make robust
  crypto: dh - fix calculating encoded key size
  crypto: ccp - Check for NULL PSP pointer at module unload
  crypto: arm/chacha20 - always use vrev for 16-bit rotates
  crypto: ccree - allow bigger than sector XTS op
  crypto: ccree - zero all of request ctx before use
  crypto: ccree - remove cipher ivgen left overs
  crypto: ccree - drop useless type flag during reg
  crypto: ablkcipher - fix crash flushing dcache in error path
  crypto: blkcipher - fix crash flushing dcache in error path
  crypto: skcipher - fix crash flushing dcache in error path
  crypto: skcipher - remove unnecessary setting of walk->nbytes
  crypto: scatterwalk - remove scatterwalk_samebuf()
  ...

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

hns bitmap allocation functions return 0 on success and -1 on failure.
Callers of these functions wrongly used their return value as an errno,
fix that by making a proper conversion.

Fixes: a598c6f4 ("IB/hns: Simplify function of pd alloc and qp alloc")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

i8259.h uses inb/outb and thus needs to include asm/io.h to avoid the
following build error, as seen with x86_64:defconfig and CONFIG_SMP=n.

  In file included from drivers/rtc/rtc-cmos.c:45:0:
  arch/x86/include/asm/i8259.h: In function 'inb_pic':
  arch/x86/include/asm/i8259.h:32:24: error:
	implicit declaration of function 'inb'

  arch/x86/include/asm/i8259.h: In function 'outb_pic':
  arch/x86/include/asm/i8259.h:45:2: error:
	implicit declaration of function 'outb'
Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Suggested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Fixes: 447ae316 ("x86: Don't include linux/irq.h from asm/hardirq.h")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Kconfig consolidation from Masahiro Yamada:
 "Consolidation of Kconfig files by Christoph Hellwig.

  Move the source statements of arch-independent Kconfig files instead
  of duplicating the includes in every arch/$(SRCARCH)/Kconfig"

* tag 'kconfig-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: add a Memory Management options" menu
  kconfig: move the "Executable file formats" menu to fs/Kconfig.binfmt
  kconfig: use a menu in arch/Kconfig to reduce clutter
  kconfig: include kernel/Kconfig.preempt from init/Kconfig
  Kconfig: consolidate the "Kernel hacking" menu
  kconfig: include common Kconfig files from top-level Kconfig
  kconfig: remove duplicate SWAP symbol defintions
  um: create a proper drivers Kconfig
  um: cleanup Kconfig files
  um: stop abusing KBUILD_KCONFIG

  - Whitelist VMD devices with fast interrupt handlers to avoid sharing
    vectors with slow handlers (Keith Busch)

* remotes/lorenzo/pci/vmd:
  PCI: vmd: White list for fast interrupt handlers

  - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

  - Use generic pci_host_bridge in mvebu instead of ARM-specific API
    (Thomas Petazzoni)

* remotes/lorenzo/pci/mvebu:
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  PCI: mvebu: Convert to use pci_host_bridge directly
  PCI: mvebu: Use resource_size() to remap I/O space
  PCI: mvebu: Only remap I/O space if configured
  PCI: mvebu: Fix I/O space end address calculation
  PCI: mvebu: Remove redundant platform_set_drvdata() call

  - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

  - Fix mobiveil missing include file (Lorenzo Pieralisi)

  - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

* remotes/lorenzo/pci/mobiveil:
  PCI: mobiveil: Add Kconfig/Makefile entries
  PCI: mobiveil: Add missing ../pci.h include
  PCI: mobiveil: Fix struct mobiveil_pcie.pcie_reg_base address type
  PCI: mobiveil: Integer overflow in IB_WIN_SIZE

  - Add more devices to Broadcom PAXC quirk (Ray Jui)

  - Work around corrupted Broadcom PAXC config space to enable SMMU and
    GICv3 ITS (Ray Jui)

  - Disable MSI parsing to work around broken Broadcom PAXC logic in some
    devices (Ray Jui)

  - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray
    Jui)

  - Lower iproc log level to reduce console output during boot (Ray Jui)

* remotes/lorenzo/pci/iproc:
  PCI: iproc: Reduce inbound/outbound mapping print level
  PCI: iproc: Reject unconfigured physical functions from PAXC
  PCI: iproc: Disable MSI parsing in certain PAXC blocks
  PCI: iproc: Fix up corrupted PAXC root complex config registers
  PCI: iproc: Activate PAXC bridge quirk for more devices

  - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
    (Jia-Ju Bai)

* remotes/lorenzo/pci/hv:
  PCI: hv: Replace GFP_ATOMIC with GFP_KERNEL in new_pcichild_device()

  - Add Kirin MSI support (Xiaowei Song)

  - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
    armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo)

  - Move link notification settings from DesignWare core to individual
    drivers (Gustavo Pimentel)

  - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

  - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel)

  - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

  - Add endpoint library MSI-X test support (Gustavo Pimentel)

* remotes/lorenzo/pci/dwc:
  PCI: endpoint: Add MSI set maximum restriction
  tools: PCI: Add MSI-X support
  pci_endpoint_test: Add 2 ioctl commands
  pci-epf-test/pci_endpoint_test: Add MSI-X support
  pci-epf-test/pci_endpoint_test: Use irq_type module parameter
  pci-epf-test/pci_endpoint_test: Cleanup PCI_ENDPOINT_TEST memspace
  PCI: dwc: Add legacy interrupt callback handler
  PCI: dwc: Rework MSI callbacks handler
  PCI: dwc: Add MSI-X callbacks handler
  PCI: Update xxx_pcie_ep_raise_irq() and pci_epc_raise_irq() signatures
  PCI: endpoint: Add MSI-X interfaces
  PCI: dwc: Fix EP link notification implementation
  PCI: spear13xx: Drop unnecessary root_bus_nr setting
  PCI: qcom: Drop unnecessary root_bus_nr setting
  PCI: histb: Drop unnecessary root_bus_nr setting
  PCI: designware-plat: Drop unnecessary root_bus_nr setting
  PCI: artpec6: Drop unnecessary root_bus_nr setting
  PCI: armada8k: Drop unnecessary root_bus_nr setting
  PCI: keystone: Drop unnecessary root_bus_nr setting
  PCI: imx6: Drop unnecessary root_bus_nr setting
  PCI: exynos: Drop unnecessary root_bus_nr setting
  PCI: kirin: Add MSI support

  - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

  - Add Cadence support for optional generic PHYs (Alan Douglas)

  - Add Cadence power management ops (Alan Douglas)

  - Remove redundant variable from Cadence driver (Colin Ian King)

* remotes/lorenzo/pci/cadence:
  PCI: pcie-cadence-ep: Remove redundant variable mmc
  PCI: cadence: Add shutdown callback to host driver
  PCI: cadence: Add Power Management ops for host and EP
  dt-bindings: PCI: cadence: Add DT bindings for optional PHYs
  PCI: cadence: Add generic PHY support to host and EP drivers
  PCI: cadence: Update cdns_pcie_writel() function signature

  - Remove Aardvark outbound window configuration (Evan Wang)

  - Fix Aardvark bridge window sizing issue (Zachary Zhang)

  - Convert Aardvark to use pci_host_probe() to reduce code duplication
    (Thomas Petazzoni)

* remotes/lorenzo/pci/aardvark:
  PCI: aardvark: Convert to use pci_host_probe()
  PCI: aardvark: Size bridges before resources allocation
  PCI: aardvark: Remove PCIe outbound window configuration
  PCI: aardvark: Introduce an advk_pcie_valid_device() helper

# Conflicts:
#	drivers/pci/controller/pci-aardvark.c

  - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

* remotes/lorenzo/pci/controller/misc:
  PCI/xilinx: Depend on OF instead of the ARCH