- 29 Jul, 2015 5 commits
-
-
Wentao Xu authored
Release all blocks after the pipe is disabled, even when vsync didn't happen in some error cases. Allow requesting SMB multiple times before configuring to hardware, by releasing blocks not programmed to hardware yet for shrinking case. This fixes a potential leak of shared memory pool blocks. Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Wentao Xu authored
The atomic commit cannot easily undo and return an error once the state is swapped. Change to uninterruptible wait, and ignore the timeout error. Signed-off-by: Wentao Xu <wentaox@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
mdp4_get_frame_format() can dereference a drm_framebuffer when it's NULL. Call it in mdp4_plane_mode_set only when we know fb is non-NULL. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
We need to return a new sgt, since the caller takes ownership of it. Reported-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
Two more nouveau fixes. * 'linux-4.2' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/nouveau/ttm: fix tiled system memory with Maxwell drm/nouveau/kms/nv50-: guard against enabling cursor on disabled heads
-
- 28 Jul, 2015 3 commits
-
-
Alexandre Courbot authored
Add Maxwell to the switch statement that sets node->memtype, otherwise all tiling information is ignored for buffers in system memory. While we are at it, make that switch statement explicitly complain the next time we meet a non-handled card family. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Userspace has started doing this, which upsets the display class hw error checking in various unpleasant ways. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Dave Airlie authored
Various minor fixes all over the place, nothing too scary. * 'linux-4.2' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/fbcon/g80: reduce PUSH_SPACE alloc, fire ring on accel init drm/nouveau/fbcon/gf100-: reduce RING_SPACE allocation drm/nouveau/fbcon/nv11-: correctly account for ring space usage drm/nouveau/bios: add proper support for opcode 0x59 drm/nouveau/bios: add 0x59 and 0x5a opcodes drm/nouveau/disp: Use NULL for pointers drm/nouveau/pm: fix a potential race condition when creating an engine context drm/nouveau/pm: prevent freeing the wrong engine context drm/nouveau/gr/gf100: wait for GR idle after GO_IDLE bundle drm/nouveau/gr/gf100: wait on bottom half of FE's pipeline drm/nouveau/fifo/gk104: kick channels when deactivating them drm/nouveau/ibus/gk20a: increase SM wait timeout drm/nouveau/platform: fix compile error if !CONFIG_IOMMU drm/nouveau: Do not leak client objects drm/nouveau/clk/gt215: u32->s32 for difference in req. and set clock drm/nouveau/drm/nv04-nv40/instmem: protect access to priv->heap by mutex drm/nouveau: hold mutex when calling nouveau_abi16_fini()
-
- 27 Jul, 2015 17 commits
-
-
Ilia Mirkin authored
Only 58 words get written to the ring, not 59. Also, normalize the accel init wrt nvc0 and nv04 fbcon impls by firing the ring at accel init time rather than waiting until "later". Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
We only emit 58 words to the ring, not 60. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
The RING_SPACE macro accounts how much space is used up so it's important to ask it for the right amount. Incorrect accounting of this can cause page faults down the line as writes are attempted outside of the ring. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
More analysis shows that this is identical to 0x79 except that it loads the frequency indirectly from elsewhere in the VBIOS. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91025Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
Opcode 0x5a is a register write for data looked up from another part of the VBIOS image. 0x59 is a more complex opcode, but we may as well recognize it. These occur on a single known instance of Riva TNT2 hardware. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91025Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Thierry Reding authored
The return type of exec_lookup() is struct nvkm_output *, so it should return NULL rather than 0. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Samuel Pitoiset authored
There is always the possiblity that the ppm->context pointer would get partially updated and accidentally would equal ctx. This would allow two contexts to co-exist, which is not acceptable. Moving the test to the critical section takes care of this problem. Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Samuel Pitoiset authored
This fixes a crash when multiple PM engine contexts are created. Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Alexandre Courbot authored
After submitting a GO_IDLE bundle, one must wait for GR to effectively be idle before submitting the next bundle. Failure to do so may result in undefined behavior in some rare cases. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reported-by: Kary Jin <karyj@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Alexandre Courbot authored
When emitting the ICMD bundle, wait on the bottom half (bit 3 of the GR_STATUS register) instead of upper half (bit 2) to make sure methods are effectively emitted. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Alexandre Courbot authored
Kicking channels is part of their deactivation process. Maxwell chips are particularly sensitive to this, and can start fetching the previous pushbuffer of a recycled channel if this is not done. While we are at it, improve the channel preemption code to only wait for bit 20 of 0x002634 to turn to 0, as it is the bit indicating a preempt is pending. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Alexandre Courbot authored
Increase clock timeout for SYS, FPB and GPC in order to avoid operation failure at high gpcclk rate. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Alexandre Courbot authored
The lack of IOMMU API support can make nouveau_platform_probe_iommu() fail to compile because struct iommu_ops is then empty. Fix this by skipping IOMMU probe in that case - lack of IOMMU on platform devices is sub-optimal, but is not an error. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Thierry Reding authored
The memory allocated for a nouveau_cli object in nouveau_cli_create() is never freed. Free the memory in nouveau_cli_destroy() to plug this leak. kmemleak recorded this after running a couple of nouveau test programs. Note that kmemleak points at drm_open_helper() because for some reason it thinks that skipping the first two stack frames is a good idea. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Roy Spliet authored
This difference can of course be negative too... Signed-off-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Kamil Dudka authored
This fixes the list_del corruption reported at <https://bugzilla.redhat.com/1205985>. Signed-off-by: Kamil Dudka <kdudka@redhat.com>
-
Kamil Dudka authored
This was the only access to cli->abi16 without holding the mutex. Signed-off-by: Kamil Dudka <kdudka@redhat.com>
-
- 26 Jul, 2015 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix for the intel cqm perf facility to prevent IPIs from interrupt context" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/cqm: Return cached counter value from IRQ context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "This update contains: - the manual revert of the SYSCALL32 changes which caused a regression - a fix for the MPX vma handling - three fixes for the ioremap 'is ram' checks. - PAT warning fixes - a trivial fix for the size calculation of TLB tracepoints - handle old EFI structures gracefully This also contains a PAT fix from Jan plus a revert thereof. Toshi explained why the code is correct" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/pat: Revert 'Adjust default caching mode translation tables' x86/asm/entry/32: Revert 'Do not use R9 in SYSCALL32' commit x86/mm: Fix newly introduced printk format warnings mm: Fix bugs in region_is_ram() x86/mm: Remove region_is_ram() call from ioremap x86/mm: Move warning from __ioremap_check_ram() to the call site x86/mm/pat, drivers/media/ivtv: Move the PAT warning and replace WARN() with pr_warn() x86/mm/pat, drivers/infiniband/ipath: Replace WARN() with pr_warn() x86/mm/pat: Adjust default caching mode translation tables x86/fpu: Disable dependent CPU features on "noxsave" x86/mpx: Do not set ->vm_ops on MPX VMAs x86/mm: Add parenthesis for TLB tracepoint size calculation efi: Handle memory error structures produced based on old versions of standard
-
Thomas Gleixner authored
Toshi explains: "No, the default values need to be set to the fallback types, i.e. minimal supported mode. For WC and WT, UC is the fallback type. When PAT is disabled, pat_init() does update the tables below to enable WT per the default BIOS setup. However, when PAT is enabled, but CPU has PAT -errata, WT falls back to UC per the default values." Revert: ca1fec58 'x86/mm/pat: Adjust default caching mode translation tables' Requested-by: Toshi Kani <toshi.kani@hp.com> Cc: Jan Beulich <jbeulich@suse.de> Link: http://lkml.kernel.org/r/1437577776.3214.252.camel@hp.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Matt Fleming authored
Peter reported the following potential crash which I was able to reproduce with his test program, [ 148.765788] ------------[ cut here ]------------ [ 148.765796] WARNING: CPU: 34 PID: 2840 at kernel/smp.c:417 smp_call_function_many+0xb6/0x260() [ 148.765797] Modules linked in: [ 148.765800] CPU: 34 PID: 2840 Comm: perf Not tainted 4.2.0-rc1+ #4 [ 148.765803] ffffffff81cdc398 ffff88085f105950 ffffffff818bdfd5 0000000000000007 [ 148.765805] 0000000000000000 ffff88085f105990 ffffffff810e413a 0000000000000000 [ 148.765807] ffffffff82301080 0000000000000022 ffffffff8107f640 ffffffff8107f640 [ 148.765809] Call Trace: [ 148.765810] <NMI> [<ffffffff818bdfd5>] dump_stack+0x45/0x57 [ 148.765818] [<ffffffff810e413a>] warn_slowpath_common+0x8a/0xc0 [ 148.765822] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765824] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765825] [<ffffffff810e422a>] warn_slowpath_null+0x1a/0x20 [ 148.765827] [<ffffffff811613f6>] smp_call_function_many+0xb6/0x260 [ 148.765829] [<ffffffff8107f640>] ? intel_cqm_stable+0x60/0x60 [ 148.765831] [<ffffffff81161748>] on_each_cpu_mask+0x28/0x60 [ 148.765832] [<ffffffff8107f6ef>] intel_cqm_event_count+0x7f/0xe0 [ 148.765836] [<ffffffff811cdd35>] perf_output_read+0x2a5/0x400 [ 148.765839] [<ffffffff811d2e5a>] perf_output_sample+0x31a/0x590 [ 148.765840] [<ffffffff811d333d>] ? perf_prepare_sample+0x26d/0x380 [ 148.765841] [<ffffffff811d3497>] perf_event_output+0x47/0x60 [ 148.765843] [<ffffffff811d36c5>] __perf_event_overflow+0x215/0x240 [ 148.765844] [<ffffffff811d4124>] perf_event_overflow+0x14/0x20 [ 148.765847] [<ffffffff8107e7f4>] intel_pmu_handle_irq+0x1d4/0x440 [ 148.765849] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765853] [<ffffffff81219bad>] ? vunmap_page_range+0x19d/0x2f0 [ 148.765854] [<ffffffff81219d11>] ? unmap_kernel_range_noflush+0x11/0x20 [ 148.765859] [<ffffffff814ce6fe>] ? ghes_copy_tofrom_phys+0x11e/0x2a0 [ 148.765863] [<ffffffff8109e5db>] ? native_apic_msr_write+0x2b/0x30 [ 148.765865] [<ffffffff8109e44d>] ? x2apic_send_IPI_self+0x1d/0x20 [ 148.765869] [<ffffffff81065135>] ? arch_irq_work_raise+0x35/0x40 [ 148.765872] [<ffffffff811c8d86>] ? irq_work_queue+0x66/0x80 [ 148.765875] [<ffffffff81075306>] perf_event_nmi_handler+0x26/0x40 [ 148.765877] [<ffffffff81063ed9>] nmi_handle+0x79/0x100 [ 148.765879] [<ffffffff81064422>] default_do_nmi+0x42/0x100 [ 148.765880] [<ffffffff81064563>] do_nmi+0x83/0xb0 [ 148.765884] [<ffffffff818c7c0f>] end_repeat_nmi+0x1e/0x2e [ 148.765886] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765888] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765890] [<ffffffff811d07a6>] ? __perf_event_task_sched_in+0x36/0xa0 [ 148.765891] <<EOE>> [<ffffffff8110ab66>] finish_task_switch+0x156/0x210 [ 148.765898] [<ffffffff818c1671>] __schedule+0x341/0x920 [ 148.765899] [<ffffffff818c1c87>] schedule+0x37/0x80 [ 148.765903] [<ffffffff810ae1af>] ? do_page_fault+0x2f/0x80 [ 148.765905] [<ffffffff818c1f4a>] schedule_user+0x1a/0x50 [ 148.765907] [<ffffffff818c666c>] retint_careful+0x14/0x32 [ 148.765908] ---[ end trace e33ff2be78e14901 ]--- The CQM task events are not safe to be called from within interrupt context because they require performing an IPI to read the counter value on all sockets. And performing IPIs from within IRQ context is a "no-no". Make do with the last read counter value currently event in event->count when we're invoked in this context. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vikas Shivappa <vikas.shivappa@intel.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Will Auld <will.auld@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1437490509-15373-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here's a few USB and PHY fixes for 4.2-rc4. Nothing major, the shortlog has the full details. All of these have been in linux-next successfully" * tag 'usb-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits) USB: OHCI: fix bad #define in ohci-tmio.c cdc-acm: Destroy acm_minors IDR on module exit usb-storage: Add ignore-device quirk for gm12u320 based usb mini projectors usb-storage: ignore ZTE MF 823 card reader in mode 0x1225 USB: OHCI: Fix race between ED unlink and URB submission usb: core: lpm: set lpm_capable for root hub device xhci: do not report PLC when link is in internal resume state xhci: prevent bus_suspend if SS port resuming in phase 1 xhci: report U3 when link is in resume state xhci: Calculate old endpoints correctly on device reset usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() function xhci: Workaround to get D3 working in Intel xHCI xhci: call BIOS workaround to enable runtime suspend on Intel Braswell usb: dwc3: Reset the transfer resource index on SET_INTERFACE usb: gadget: udc: core: Fix argument of dma_map_single for IOMMU usb: gadget: mv_udc_core: fix phy_regs I/O memory leak usb: ulpi: ulpi_init should be executed in subsys_initcall phy: berlin-usb: fix divider for BG2 phy: berlin-usb: fix divider for BG2CD phy/pxa: add HAS_IOMEM dependency ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are a number of small serial and tty fixes for reported issues. All have been in linux-next successfully" * tag 'tty-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: Fix !TASK_RUNNING diagnostic warning from paste_selection() serial: core: Fix crashes while echoing when closing m32r: Add ioreadXX/iowriteXX big-endian mmio accessors Revert "serial: imx: initialized DMA w/o HW flow enabled" sc16is7xx: fix FIFO address of secondary UART sc16is7xx: fix Kconfig dependencies serial: etraxfs-uart: Fix release etraxfs_uart_ports tty/vt: Fix the memory leak in visual_init serial: amba-pl011: Fix devm_ioremap_resource return value check n_tty: signal and flush atomically
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are a number of iio and staging driver fixes for reported issues for 4.2-rc4. All have been in linux-next for a while with no problems" * tag 'staging-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits) iio:light:stk3310: make endianness independent of host iio:light:stk3310: move device register to end of probe iio: mma8452: use iio event type IIO_EV_TYPE_MAG iio: mcp320x: Fix NULL pointer dereference iio: adc: vf610: fix the adc register read fail issue iio: mlx96014: Replace offset sign iio: magnetometer: mmc35240: fix SET/RESET sequence iio: magnetometer: mmc35240: Fix SET/RESET mask iio: magnetometer: mmc35240: Fix crash in pm suspend iio:magnetometer:bmc150_magn: output intended variable iio:magnetometer:bmc150_magn: add regmap dependency staging: vt6656: check ieee80211_bss_conf bssid not NULL staging: vt6655: check ieee80211_bss_conf bssid not NULL iio: tmp006: Check channel info on write iio: sx9500: Add missing init in sx9500_buffer_pre{en,dis}able() iio:light:ltr501: fix regmap dependency iio:light:ltr501: fix variable in ltr501_init iio: sx9500: fix bug in compensation code iio: sx9500: rework error handling of raw readings iio: magnetometer: mmc35240: fix available sampling frequencies ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some char and misc driver fixes for reported issues. One parport patch is reverted as it was incorrect, thanks to testing by the 0-day bot" * tag 'char-misc-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: parport: Revert "parport: fix memory leak" mei: prevent unloading mei hw modules while the device is opened. misc: mic: scif bug fix for vmalloc_to_page crash parport: fix freeing freed memory parport: fix memory leak parport: fix error handling
-
- 25 Jul, 2015 6 commits
-
-
Sudip Mukherjee authored
This reverts commit 23c40591 ("parport: fix memory leak") par_dev->state was already being removed in parport_unregister_device(). Reported-by: Ying Huang <ying.huang@intel.com> Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
Merge tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "Back in 3.16 the ftrace code was redesigned and cleaned up to remove the double iteration list (one for registered ftrace ops, and one for registered "global" ops), to just use one list. That simplified the code but also broke the function tracing filtering on pid. This updates the code to handle the filtering again with the new logic" * tag 'trace-v4.2-rc2-fix3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix breakage of set_ftrace_pid
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "A minor fix for the libnvdimm subsystem. This is not critical. The problem can be worked around in userspace by putting the namespace temporarily into raw mode (ndctl_namespace_set_raw_mode() from libndctl), but that is awkward for management utilities. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: libnvdimm: fix namespace seed creation
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from Neil Brown: "Some md fixes for 4.2 Several are tagged for -stable. A few aren't because they are not very, serious or because they are in the 'experimental' cluster code" * tag 'md/4.2-fixes' of git://neil.brown.name/md: md/raid5: clear R5_NeedReplace when no longer needed. Fix read-balancing during node failure md-cluster: fix bitmap sub-offset in bitmap_read_sb md: Return error if request_module fails and returns positive value md: Skip cluster setup in case of error while reading bitmap md/raid1: fix test for 'was read error from last working device'. md: Skip cluster setup for dm-raid md: flush ->event_work before stopping array. md/raid10: always set reshape_safe when initializing reshape_position. md/raid5: avoid races when changing cache size.
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Two trivial updates. I meant to send these much earlier, but I've been preoccupied. - Add MAINTAINERS entry for diskonchip g3 driver - Fix an overlooked conflict in bitfield value assignments The latter update is a bit overdue, but there's no reason to wait any longer" * tag 'for-linus-20150724' of git://git.infradead.org/linux-mtd: mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict MAINTAINERS: mtd: docg3: add docg3 maintainer
-
Dan Williams authored
A new BLK namespace "seed" device is created whenever the current seed is successfully probed. However, if that namespace is assigned to a BTT it may never directly experience a successful probe as it is a subordinate device to a BTT configuration. The effect of the current code is that no new namespaces can be instantiated, after the seed namespace, to consume available BLK DPA capacity. Fix this by treating a successful BTT probe event as a successful probe event for the backing namespace. Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-