1. 21 Apr, 2016 21 commits
    • Simon Horman's avatar
      openvswitch: use flow protocol when recalculating ipv6 checksums · b4f70527
      Simon Horman authored
      When using masked actions the ipv6_proto field of an action
      to set IPv6 fields may be zero rather than the prevailing protocol
      which will result in skipping checksum recalculation.
      
      This patch resolves the problem by relying on the protocol
      in the flow key rather than that in the set field action.
      
      Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.")
      Cc: Jarno Rajahalme <jrajahalme@nicira.com>
      Signed-off-by: default avatarSimon Horman <simon.horman@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b4f70527
    • Shrikrishna Khare's avatar
      Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets · f0d43780
      Shrikrishna Khare authored
      For IPv6, if the device indicates that the checksum is correct, set
      CHECKSUM_UNNECESSARY.
      Reported-by: default avatarSubbarao Narahari <snarahari@vmware.com>
      Signed-off-by: default avatarShrikrishna Khare <skhare@vmware.com>
      Signed-off-by: default avatarJin Heo <heoj@vmware.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f0d43780
    • Ben Hutchings's avatar
      atl2: Disable unimplemented scatter/gather feature · f43bfaed
      Ben Hutchings authored
      atl2 includes NETIF_F_SG in hw_features even though it has no support
      for non-linear skbs.  This bug was originally harmless since the
      driver does not claim to implement checksum offload and that used to
      be a requirement for SG.
      
      Now that SG and checksum offload are independent features, if you
      explicitly enable SG *and* use one of the rare protocols that can use
      SG without checkusm offload, this potentially leaks sensitive
      information (before you notice that it just isn't working).  Therefore
      this obscure bug has been designated CVE-2016-2117.
      Reported-by: default avatarJustin Yackoski <jyackoski@crypto-nite.com>
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f43bfaed
    • David S. Miller's avatar
      Merge branch 'mlx4-fixes' · 669c00c0
      David S. Miller authored
      Or Gerlitz says:
      
      ====================
      Mellaox 40G driver fixes for 4.6-rc
      
      With the fix for ARM bug being under the works, these are
      few other fixes for mlx4 we have ready to go.
      
      Eran addressed the problematic/wrong reporting of dropped packets, Daniel
      fixed some matters related to PPC EEH's and Jenny's patch makes sure
      VFs can't change the port's pause settings.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      669c00c0
    • Eran Ben Elisha's avatar
      net/mlx4_en: Split SW RX dropped counter per RX ring · d21ed3a3
      Eran Ben Elisha authored
      Count SW packet drops per RX ring instead of a global counter. This
      will allow monitoring the number of rx drops per ring.
      
      In addition, SW rx_dropped counter was overwritten by HW rx_dropped
      counter, sum both of them instead to show the accurate value.
      
      Fixes: a3333b35 ('net/mlx4_en: Moderate ethtool callback to [...] ')
      Signed-off-by: default avatarEran Ben Elisha <eranbe@mellanox.com>
      Reported-by: default avatarBrenden Blanco <bblanco@plumgrid.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Reported-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d21ed3a3
    • Eugenia Emantayev's avatar
      net/mlx4_core: Don't allow to VF change global pause settings · 2a500090
      Eugenia Emantayev authored
      Currently changing global pause settings is done via SET_PORT
      command with input modifier GENERAL. This command is allowed
      for each VF since MTU setting is done via the same command.
      
      Change the above to the following scheme: before passing the
      request to the FW, the PF will check whether it was issued
      by a slave. If yes, don't change global pause and warn,
      otherwise change to the requested value and store for
      further reference.
      Signed-off-by: default avatarEugenia Emantayev <eugenia@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a500090
    • Daniel Jurgens's avatar
      net/mlx4_core: Avoid repeated calls to pci enable/disable · 4bfd2e6e
      Daniel Jurgens authored
      Maintain the PCI status and provide wrappers for enabling and disabling
      the PCI device.  Performing the actions more than once without doing
      its opposite results in warning logs.
      
      This occurred when EEH hotplugged the device causing a warning for
      disabling an already disabled device.
      
      Fixes: 2ba5fbd6 ('net/mlx4_core: Handle AER flow properly')
      Signed-off-by: default avatarDaniel Jurgens <danielj@mellanox.com>
      Signed-off-by: default avatarYishai Hadas <yishaih@mellanox.com>
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4bfd2e6e
    • Daniel Jurgens's avatar
      net/mlx4_core: Implement pci_resume callback · c12833ac
      Daniel Jurgens authored
      Move resume related activities to a new pci_resume function instead of
      performing them in mlx4_pci_slot_reset.  This change is needed to avoid
      a hotplug during EEH recovery due to commit f2da4ccf ("powerpc/eeh:
      More relaxed hotplug criterion").
      
      Fixes: 2ba5fbd6 ('net/mlx4_core: Handle AER flow properly')
      Signed-off-by: default avatarDaniel Jurgens <danielj@mellanox.com>
      Signed-off-by: default avatarYishai Hadas <yishaih@mellanox.com>
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c12833ac
    • Mark Brown's avatar
      net: phy: spi_ks8895: Don't leak references to SPI devices · a1459c1c
      Mark Brown authored
      The ks8895 driver is using spi_dev_get() apparently just to take a copy
      of the SPI device used to instantiate it but never calls spi_dev_put()
      to free it.  Since the device is guaranteed to exist between probe() and
      remove() there should be no need for the driver to take an extra
      reference to it so fix the leak by just using a straight assignment.
      Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1459c1c
    • Neil Armstrong's avatar
      net: ethernet: davinci_emac: Fix platform_data overwrite · 210990b0
      Neil Armstrong authored
      When the DaVinci emac driver is removed and re-probed, the actual
      pdev->dev.platform_data is populated with an unwanted valid pointer saved by
      the previous davinci_emac_of_get_pdata() call, causing a kernel crash when
      calling priv->int_disable() in emac_int_disable().
      
      Unable to handle kernel paging request at virtual address c8622a80
      ...
      [<c0426fb4>] (emac_int_disable) from [<c0427700>] (emac_dev_open+0x290/0x5f8)
      [<c0427700>] (emac_dev_open) from [<c04c00ec>] (__dev_open+0xb8/0x120)
      [<c04c00ec>] (__dev_open) from [<c04c0370>] (__dev_change_flags+0x88/0x14c)
      [<c04c0370>] (__dev_change_flags) from [<c04c044c>] (dev_change_flags+0x18/0x48)
      [<c04c044c>] (dev_change_flags) from [<c052bafc>] (devinet_ioctl+0x6b4/0x7ac)
      [<c052bafc>] (devinet_ioctl) from [<c04a1428>] (sock_ioctl+0x1d8/0x2c0)
      [<c04a1428>] (sock_ioctl) from [<c014f054>] (do_vfs_ioctl+0x41c/0x600)
      [<c014f054>] (do_vfs_ioctl) from [<c014f2a4>] (SyS_ioctl+0x6c/0x7c)
      [<c014f2a4>] (SyS_ioctl) from [<c000ff60>] (ret_fast_syscall+0x0/0x1c)
      
      Fixes: 42f59967 ("net: ethernet: davinci_emac: add OF support")
      Cc: Brian Hutchinson <b.hutchman@gmail.com>
      Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      210990b0
    • Neil Armstrong's avatar
      net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable · 99164f9e
      Neil Armstrong authored
      In order to avoid an Unbalanced pm_runtime_enable in the DaVinci
      emac driver when the device is removed and re-probed, and a
      pm_runtime_disable() call in davinci_emac_remove().
      
      Actually, using unbind/bind on a TI DM8168 SoC gives :
      $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/unbind
      net eth1: DaVinci EMAC: davinci_emac_remove()
      $ echo 4a120000.ethernet > /sys/bus/platform/drivers/davinci_emac/bind
      davinci_emac 4a120000.ethernet: Unbalanced pm_runtime_enable
      
      Cc: Brian Hutchinson <b.hutchman@gmail.com>
      Fixes: 3ba97381 ("net: ethernet: davinci_emac: add pm_runtime support")
      Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      99164f9e
    • David S. Miller's avatar
      Merge branch 'qed-fixes' · 3ad97799
      David S. Miller authored
      Manish Chopra says:
      
      ====================
      qede: Bug fixes
      
      This series fixes -
      
      * various memory allocation failure flows for fastpath
      * issues with respect to driver GRO packets handling
      
      V1->V2
      
      * Send series against net instead of net-next.
      
      Please consider applying this series to "net"
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3ad97799
    • Manish Chopra's avatar
      qede: Fix single MTU sized packet from firmware GRO flow · ee2fa8e6
      Manish Chopra authored
      In firmware assisted GRO flow there could be a single MTU sized
      segment arriving due to firmware aggregation timeout/last segment
      in an aggregation flow, which is not expected to be an actual gro
      packet. So If a skb has zero frags from the GRO flow then simply
      push it in the stack as non gso skb.
      Signed-off-by: default avatarManish Chopra <manish.chopra@qlogic.com>
      Signed-off-by: default avatarYuval Mintz <yuval.mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ee2fa8e6
    • Manish Chopra's avatar
      qede: Fix setting Skb network header · aad94c04
      Manish Chopra authored
      Skb's network header needs to be set before extracting IPv4/IPv6
      headers from it.
      Signed-off-by: default avatarManish Chopra <manish.chopra@qlogic.com>
      Signed-off-by: default avatarYuval Mintz <yuval.mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aad94c04
    • Manish Chopra's avatar
      qede: Fix various memory allocation error flows for fastpath · f86af2df
      Manish Chopra authored
      This patch handles memory allocation failures for fastpath
      gracefully in the driver.
      Signed-off-by: default avatarManish Chopra <manish.chopra@qlogic.com>
      Signed-off-by: default avatarYuval Mintz <yuval.mintz@qlogic.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f86af2df
    • David S. Miller's avatar
      Merge branch 'tcp-coalesce-merge-timestamps' · 5bec11cf
      David S. Miller authored
      Martin KaFai Lau says:
      
      ====================
      tcp: Merge timestamp info when coalescing skbs
      
      This series is separated from the RFC series related to
      tcp_sendmsg(MSG_EOR) and it is targeting for the net branch.
      This patchset is focusing on fixing cases where TCP
      timestamp could be lost after coalescing skbs.
      
      A BPF prog is used to kprobe to sock_queue_err_skb()
      and print out the value of serr->ee.ee_data.  The BPF
      prog (run-able from bcc) is attached here:
      
      BPF prog used for testing:
      ~~~~~
      
      from __future__ import print_function
      from bcc import BPF
      
      bpf_text = """
      
      int trace_err_skb(struct pt_regs *ctx)
      {
      	struct sk_buff *skb = (struct sk_buff *)ctx->si;
      	struct sock *sk = (struct sock *)ctx->di;
      	struct sock_exterr_skb *serr;
      	u32 ee_data = 0;
      
      	if (!sk || !skb)
      		return 0;
      
      	serr = SKB_EXT_ERR(skb);
      	bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data);
      	bpf_trace_printk("ee_data:%u\\n", ee_data);
      
      	return 0;
      };
      """
      
      b = BPF(text=bpf_text)
      b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb")
      print("Attached to kprobe")
      b.trace_print()
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5bec11cf
    • Martin KaFai Lau's avatar
      tcp: Merge tx_flags and tskey in tcp_shifted_skb · cfea5a68
      Martin KaFai Lau authored
      After receiving sacks, tcp_shifted_skb() will collapse
      skbs if possible.  tx_flags and tskey also have to be
      merged.
      
      This patch reuses the tcp_skb_collapse_tstamp() to handle
      them.
      
      BPF Output Before:
      ~~~~~
      <no-output-due-to-missing-tstamp-event>
      
      BPF Output After:
      ~~~~~
      <...>-2024  [007] d.s.    88.644374: : ee_data:14599
      
      Packetdrill Script:
      ~~~~~
      +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
      +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
      +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
      +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
      +0 bind(3, ..., ...) = 0
      +0 listen(3, 1) = 0
      
      0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
      0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
      0.200 < . 1:1(0) ack 1 win 257
      0.200 accept(3, ..., ...) = 4
      +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0
      
      0.200 write(4, ..., 1460) = 1460
      +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
      0.200 write(4, ..., 13140) = 13140
      
      0.200 > P. 1:1461(1460) ack 1
      0.200 > . 1461:8761(7300) ack 1
      0.200 > P. 8761:14601(5840) ack 1
      
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop>
      0.300 > P. 1:1461(1460) ack 1
      0.400 < . 1:1(0) ack 14601 win 257
      
      0.400 close(4) = 0
      0.400 > F. 14601:14601(0) ack 1
      0.500 < F. 1:1(0) ack 14602 win 257
      0.500 > . 14602:14602(0) ack 2
      Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Cc: Soheil Hassas Yeganeh <soheil@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Tested-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfea5a68
    • Martin KaFai Lau's avatar
      tcp: Merge tx_flags and tskey in tcp_collapse_retrans · 082ac2d5
      Martin KaFai Lau authored
      If two skbs are merged/collapsed during retransmission, the current
      logic does not merge the tx_flags and tskey.  The end result is
      the SCM_TSTAMP_ACK timestamp could be missing for a packet.
      
      The patch:
      1. Merge the tx_flags
      2. Overwrite the prev_skb's tskey with the next_skb's tskey
      
      BPF Output Before:
      ~~~~~~
      <no-output-due-to-missing-tstamp-event>
      
      BPF Output After:
      ~~~~~~
      packetdrill-2092  [001] d.s.   453.998486: : ee_data:1459
      
      Packetdrill Script:
      ~~~~~~
      +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
      +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
      +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
      +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
      +0 bind(3, ..., ...) = 0
      +0 listen(3, 1) = 0
      
      0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
      0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
      0.200 < . 1:1(0) ack 1 win 257
      0.200 accept(3, ..., ...) = 4
      +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0
      
      0.200 write(4, ..., 730) = 730
      +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
      0.200 write(4, ..., 730) = 730
      +0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0
      0.200 write(4, ..., 11680) = 11680
      +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
      
      0.200 > P. 1:731(730) ack 1
      0.200 > P. 731:1461(730) ack 1
      0.200 > . 1461:8761(7300) ack 1
      0.200 > P. 8761:13141(4380) ack 1
      
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop>
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop>
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop>
      0.300 > P. 1:1461(1460) ack 1
      0.400 < . 1:1(0) ack 13141 win 257
      
      0.400 close(4) = 0
      0.400 > F. 13141:13141(0) ack 1
      0.500 < F. 1:1(0) ack 13142 win 257
      0.500 > . 13142:13142(0) ack 2
      Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Cc: Soheil Hassas Yeganeh <soheil@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Tested-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      082ac2d5
    • Grygorii Strashko's avatar
      drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open · 3fa88c51
      Grygorii Strashko authored
      The cpsw_ndo_open() could try to access CPSW registers before
      calling pm_runtime_get_sync(). This will trigger L3 error:
      
       WARNING: CPU: 0 PID: 21 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x220/0x34c()
       44000000.ocp:L3 Custom Error: MASTER M2 (64-bit) TARGET L4_FAST (Idle): Data Access in Supervisor mode during Functional access
      
      and CPSW will stop functioning.
      
      Hence, fix it by moving pm_runtime_get_sync() before the first access
      to CPSW registers in cpsw_ndo_open().
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3fa88c51
    • Martin KaFai Lau's avatar
      tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks · 479f85c3
      Martin KaFai Lau authored
      Assuming SOF_TIMESTAMPING_TX_ACK is on. When dup acks are received,
      it could incorrectly think that a skb has already
      been acked and queue a SCM_TSTAMP_ACK cmsg to the
      sk->sk_error_queue.
      
      In tcp_ack_tstamp(), it checks
      'between(shinfo->tskey, prior_snd_una, tcp_sk(sk)->snd_una - 1)'.
      If prior_snd_una == tcp_sk(sk)->snd_una like the following packetdrill
      script, between() returns true but the tskey is actually not acked.
      e.g. try between(3, 2, 1).
      
      The fix is to replace between() with one before() and one !before().
      By doing this, the -1 offset on the tcp_sk(sk)->snd_una can also be
      removed.
      
      A packetdrill script is used to reproduce the dup ack scenario.
      Due to the lacking cmsg support in packetdrill (may be I
      cannot find it),  a BPF prog is used to kprobe to
      sock_queue_err_skb() and print out the value of
      serr->ee.ee_data.
      
      Both the packetdrill and the bcc BPF script is attached at the end of
      this commit message.
      
      BPF Output Before Fix:
      ~~~~~~
            <...>-2056  [001] d.s.   433.927987: : ee_data:1459  #incorrect
      packetdrill-2056  [001] d.s.   433.929563: : ee_data:1459  #incorrect
      packetdrill-2056  [001] d.s.   433.930765: : ee_data:1459  #incorrect
      packetdrill-2056  [001] d.s.   434.028177: : ee_data:1459
      packetdrill-2056  [001] d.s.   434.029686: : ee_data:14599
      
      BPF Output After Fix:
      ~~~~~~
            <...>-2049  [000] d.s.   113.517039: : ee_data:1459
            <...>-2049  [000] d.s.   113.517253: : ee_data:14599
      
      BCC BPF Script:
      ~~~~~~
      #!/usr/bin/env python
      
      from __future__ import print_function
      from bcc import BPF
      
      bpf_text = """
      #include <uapi/linux/ptrace.h>
      #include <net/sock.h>
      #include <bcc/proto.h>
      #include <linux/errqueue.h>
      
      #ifdef memset
      #undef memset
      #endif
      
      int trace_err_skb(struct pt_regs *ctx)
      {
      	struct sk_buff *skb = (struct sk_buff *)ctx->si;
      	struct sock *sk = (struct sock *)ctx->di;
      	struct sock_exterr_skb *serr;
      	u32 ee_data = 0;
      
      	if (!sk || !skb)
      		return 0;
      
      	serr = SKB_EXT_ERR(skb);
      	bpf_probe_read(&ee_data, sizeof(ee_data), &serr->ee.ee_data);
      	bpf_trace_printk("ee_data:%u\\n", ee_data);
      
      	return 0;
      };
      """
      
      b = BPF(text=bpf_text)
      b.attach_kprobe(event="sock_queue_err_skb", fn_name="trace_err_skb")
      print("Attached to kprobe")
      b.trace_print()
      
      Packetdrill Script:
      ~~~~~~
      +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
      +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
      +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
      +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
      +0 bind(3, ..., ...) = 0
      +0 listen(3, 1) = 0
      
      0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
      0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
      0.200 < . 1:1(0) ack 1 win 257
      0.200 accept(3, ..., ...) = 4
      +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0
      
      +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
      0.200 write(4, ..., 1460) = 1460
      0.200 write(4, ..., 13140) = 13140
      
      0.200 > P. 1:1461(1460) ack 1
      0.200 > . 1461:8761(7300) ack 1
      0.200 > P. 8761:14601(5840) ack 1
      
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop>
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop>
      0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop>
      0.300 > P. 1:1461(1460) ack 1
      0.400 < . 1:1(0) ack 14601 win 257
      
      0.400 close(4) = 0
      0.400 > F. 14601:14601(0) ack 1
      0.500 < F. 1:1(0) ack 14602 win 257
      0.500 > . 14602:14602(0) ack 2
      Signed-off-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Cc: Soheil Hassas Yeganeh <soheil.kdev@gmail.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Tested-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      479f85c3
    • Joe Stringer's avatar
      openvswitch: Orphan skbs before IPv6 defrag · 49e261a8
      Joe Stringer authored
      This is the IPv6 counterpart to commit 8282f274 ("inet: frag: Always
      orphan skbs inside ip_defrag()").
      
      Prior to commit 029f7f3b ("netfilter: ipv6: nf_defrag: avoid/free
      clone operations"), ipv6 fragments sent to nf_ct_frag6_gather() would be
      cloned (implicitly orphaning) prior to queueing for reassembly. As such,
      when the IPv6 message is eventually reassembled, the skb->sk for all
      fragments would be NULL. After that commit was introduced, rather than
      cloning, the original skbs were queued directly without orphaning. The
      end result is that all frags except for the first and last may have a
      socket attached.
      
      This commit explicitly orphans such skbs during nf_ct_frag6_gather() to
      prevent BUG_ON(skb->sk) during a later call to ip6_fragment().
      
      kernel BUG at net/ipv6/ip6_output.c:631!
      [...]
      Call Trace:
       <IRQ>
       [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
       [<ffffffffa042c7c0>] ? do_output.isra.28+0x1b0/0x1b0 [openvswitch]
       [<ffffffff810bb8a2>] ? __lock_is_held+0x52/0x70
       [<ffffffffa042c587>] ovs_fragment+0x1f7/0x280 [openvswitch]
       [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
       [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50
       [<ffffffff81697ea0>] ? dst_discard_out+0x20/0x20
       [<ffffffff81697e80>] ? dst_ifdown+0x80/0x80
       [<ffffffffa042c703>] do_output.isra.28+0xf3/0x1b0 [openvswitch]
       [<ffffffffa042d279>] do_execute_actions+0x709/0x12c0 [openvswitch]
       [<ffffffffa04340a4>] ? ovs_flow_stats_update+0x74/0x1e0 [openvswitch]
       [<ffffffffa04340d1>] ? ovs_flow_stats_update+0xa1/0x1e0 [openvswitch]
       [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40
       [<ffffffffa042de75>] ovs_execute_actions+0x45/0x120 [openvswitch]
       [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch]
       [<ffffffff817be387>] ? _raw_spin_unlock+0x27/0x40
       [<ffffffffa042def4>] ovs_execute_actions+0xc4/0x120 [openvswitch]
       [<ffffffffa0432d65>] ovs_dp_process_packet+0x85/0x150 [openvswitch]
       [<ffffffffa04337f2>] ? key_extract+0x442/0xc10 [openvswitch]
       [<ffffffffa043b26d>] ovs_vport_receive+0x5d/0xb0 [openvswitch]
       [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
       [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
       [<ffffffff810be8f7>] ? __lock_acquire+0x927/0x20a0
       [<ffffffff817be416>] ? _raw_spin_unlock_irqrestore+0x36/0x50
       [<ffffffffa043c11d>] internal_dev_xmit+0x6d/0x150 [openvswitch]
       [<ffffffffa043c0b5>] ? internal_dev_xmit+0x5/0x150 [openvswitch]
       [<ffffffff8168fb5f>] dev_hard_start_xmit+0x2df/0x660
       [<ffffffff8168f5ea>] ? validate_xmit_skb.isra.105.part.106+0x1a/0x2b0
       [<ffffffff81690925>] __dev_queue_xmit+0x8f5/0x950
       [<ffffffff81690080>] ? __dev_queue_xmit+0x50/0x950
       [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
       [<ffffffff81690990>] dev_queue_xmit+0x10/0x20
       [<ffffffff8169a418>] neigh_resolve_output+0x178/0x220
       [<ffffffff81752759>] ? ip6_finish_output2+0x219/0x7b0
       [<ffffffff81752759>] ip6_finish_output2+0x219/0x7b0
       [<ffffffff817525a5>] ? ip6_finish_output2+0x65/0x7b0
       [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80
       [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50
       [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50
       [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40
       [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0
       [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0
       [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50
       [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80
       [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0
       [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50
       [<ffffffff817796cc>] icmpv6_push_pending_frames+0xac/0xe0
       [<ffffffff8177a4be>] icmpv6_echo_reply+0x42e/0x500
       [<ffffffff8177acbf>] icmpv6_rcv+0x4cf/0x580
       [<ffffffff81755ac7>] ip6_input_finish+0x1a7/0x690
       [<ffffffff81755925>] ? ip6_input_finish+0x5/0x690
       [<ffffffff817567a0>] ip6_input+0x30/0xa0
       [<ffffffff81755920>] ? ip6_rcv_finish+0x1a0/0x1a0
       [<ffffffff817557ce>] ip6_rcv_finish+0x4e/0x1a0
       [<ffffffff8175640f>] ipv6_rcv+0x45f/0x7c0
       [<ffffffff81755fe6>] ? ipv6_rcv+0x36/0x7c0
       [<ffffffff81755780>] ? ip6_make_skb+0x1c0/0x1c0
       [<ffffffff8168b649>] __netif_receive_skb_core+0x229/0xb80
       [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
       [<ffffffff8168c07f>] ? process_backlog+0x6f/0x230
       [<ffffffff8168bfb6>] __netif_receive_skb+0x16/0x70
       [<ffffffff8168c088>] process_backlog+0x78/0x230
       [<ffffffff8168c0ed>] ? process_backlog+0xdd/0x230
       [<ffffffff8168db43>] net_rx_action+0x203/0x480
       [<ffffffff810bdab5>] ? mark_held_locks+0x75/0xa0
       [<ffffffff817c156e>] __do_softirq+0xde/0x49f
       [<ffffffff81752768>] ? ip6_finish_output2+0x228/0x7b0
       [<ffffffff817c070c>] do_softirq_own_stack+0x1c/0x30
       <EOI>
       [<ffffffff8106f88b>] do_softirq.part.18+0x3b/0x40
       [<ffffffff8106f946>] __local_bh_enable_ip+0xb6/0xc0
       [<ffffffff81752791>] ip6_finish_output2+0x251/0x7b0
       [<ffffffff81754af1>] ? ip6_fragment+0xba1/0xc50
       [<ffffffff816cde2b>] ? ip_idents_reserve+0x6b/0x80
       [<ffffffff8175488f>] ? ip6_fragment+0x93f/0xc50
       [<ffffffff81754af1>] ip6_fragment+0xba1/0xc50
       [<ffffffff81752540>] ? ip6_flush_pending_frames+0x40/0x40
       [<ffffffff81754c6b>] ip6_finish_output+0xcb/0x1d0
       [<ffffffff81754dcf>] ip6_output+0x5f/0x1a0
       [<ffffffff81754ba0>] ? ip6_fragment+0xc50/0xc50
       [<ffffffff81797fbd>] ip6_local_out+0x3d/0x80
       [<ffffffff817554df>] ip6_send_skb+0x2f/0xc0
       [<ffffffff817555bd>] ip6_push_pending_frames+0x4d/0x50
       [<ffffffff81778558>] rawv6_sendmsg+0xa28/0xe30
       [<ffffffff81719097>] ? inet_sendmsg+0xc7/0x1d0
       [<ffffffff817190d6>] inet_sendmsg+0x106/0x1d0
       [<ffffffff81718fd5>] ? inet_sendmsg+0x5/0x1d0
       [<ffffffff8166d078>] sock_sendmsg+0x38/0x50
       [<ffffffff8166d4d6>] SYSC_sendto+0xf6/0x170
       [<ffffffff8100201b>] ? trace_hardirqs_on_thunk+0x1b/0x1d
       [<ffffffff8166e38e>] SyS_sendto+0xe/0x10
       [<ffffffff817bebe5>] entry_SYSCALL_64_fastpath+0x18/0xa8
      Code: 06 48 83 3f 00 75 26 48 8b 87 d8 00 00 00 2b 87 d0 00 00 00 48 39 d0 72 14 8b 87 e4 00 00 00 83 f8 01 75 09 48 83 7f 18 00 74 9a <0f> 0b 41 8b 86 cc 00 00 00 49 8#
      RIP  [<ffffffff8175468a>] ip6_fragment+0x73a/0xc50
       RSP <ffff880072803120>
      
      Fixes: 029f7f3b ("netfilter: ipv6: nf_defrag: avoid/free clone
      operations")
      Reported-by: default avatarDaniele Di Proietto <diproiettod@vmware.com>
      Signed-off-by: default avatarJoe Stringer <joe@ovn.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49e261a8
  2. 20 Apr, 2016 5 commits
  3. 17 Apr, 2016 2 commits
    • Arnd Bergmann's avatar
      macsec: fix crypto Kconfig dependency · ab2ed017
      Arnd Bergmann authored
      The new MACsec driver uses the AES crypto algorithm, but can be configured
      even if CONFIG_CRYPTO is disabled, leading to a build error:
      
      warning: (MAC80211 && MACSEC) selects CRYPTO_GCM which has unmet direct dependencies (CRYPTO)
      warning: (BT && CEPH_LIB && INET && MAC802154 && MAC80211 && BLK_DEV_RBD && MACSEC && AIRO_CS && LIBIPW && HOSTAP && USB_WUSB && RTLLIB_CRYPTO_CCMP && FS_ENCRYPTION && EXT4_ENCRYPTION && CEPH_FS && BIG_KEYS && ENCRYPTED_KEYS) selects CRYPTO_AES which has unmet direct dependencies (CRYPTO)
      crypto/built-in.o: In function `gcm_enc_copy_hash':
      aes_generic.c:(.text+0x2b8): undefined reference to `crypto_xor'
      aes_generic.c:(.text+0x2dc): undefined reference to `scatterwalk_map_and_copy'
      
      This adds an explicit 'select CRYPTO' statement the way that other
      drivers handle it.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab2ed017
    • Eric Dumazet's avatar
      net: bcmgenet: device stats are unsigned long · 6517eb59
      Eric Dumazet authored
      On 64bit kernels, device stats are 64bit wide, not 32bit.
      
      Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6517eb59
  4. 16 Apr, 2016 7 commits
    • David S. Miller's avatar
      Merge branch 'dsa-mv88e6xxx-fix-cross-chip-bridging' · cf6b5fb2
      David S. Miller authored
      Vivien Didelot says:
      
      ====================
      net: dsa: mv88e6xxx: fix hardware cross-chip bridging
      
      In order to accelerate cross-chip switching of frames with the hardware,
      the DSA Tag ports, used to interconnect switch devices, must learn SA
      and DA addresses, and share the same FDB with the user ports.
      
      The two first patches restore address learning on DSA links. This fixes
      hardware cross-chip bridging in a VLAN filtering enabled system, which
      implements a bridge group as a 802.1Q VLAN and thus share an isolated
      address database between DSA and user ports.
      
      The third patch changes the distinct default databases used for each
      port, to the same address database. This fixes the hardware cross-chip
      bridging in a VLAN filtering disabled system, where a bridge group gets
      implemented only as a port-based VLAN.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf6b5fb2
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: share the same default FDB · 207afda1
      Vivien Didelot authored
      For hardware cross-chip bridging to work, user ports *and* DSA ports
      need to share a common address database, in order to switch a frame to
      the correct interconnected device.
      
      This is currently working for VLAN filtering aware systems, since Linux
      will implement a bridge group as a 802.1Q VLAN, which has its own FDB,
      including DSA and CPU links as members.
      
      However when the system doesn't support VLAN filtering, Linux only
      relies on the port-based VLAN to implement a bridge group.
      
      To fix hardware cross-chip bridging for such systems, set the same
      default address database 0 for user and DSA ports, instead of giving
      them all a different default database.
      
      Note that the bridging code prevents frames to egress between unbridged
      ports, and flushes FDB entries of a port when changing its STP state.
      
      Also note that the FID 0 is special and means "all" for ATU operations,
      but it's OK since it is used as a default forwarding address database.
      
      Fixes: 2db9ce1f ("net: dsa: mv88e6xxx: assign default FDB to ports")
      Fixes: 466dfa07 ("net: dsa: mv88e6xxx: assign dynamic FDB to bridges")
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      207afda1
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: enable SA learning on DSA ports · 996ecb82
      Vivien Didelot authored
      In multi-chip systems, DSA Tag ports must learn SA addresses in order to
      correctly switch frames between interconnected chips.
      
      This fixes cross-chip hardware bridging in a VLAN filtering aware
      system, because a bridge group gets implemented as an hardware 802.1Q
      VLAN and thus DSA and user ports share the same FDB.
      
      Fixes: 4c7ea3c0 ("net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports")
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      996ecb82
    • Vivien Didelot's avatar
      net: dsa: mv88e6xxx: unlock DSA and CPU ports · 65fa4027
      Vivien Didelot authored
      Locking a port generates an hardware interrupt when a new SA address is
      received. This enables CPU directed learning, which is needed for 802.1X
      MAC authentication.
      
      To disable automatic learning on a port, the only configuration needed
      is to set its Port Association Vector to all zero.
      
      Clear PAV when SA learning should be disabled instead of locking a port.
      
      Fixes: 4c7ea3c0 ("net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports")
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      65fa4027
    • santosh.shilimkar@oracle.com's avatar
      RDS: Fix the atomicity for congestion map update · e47db94e
      santosh.shilimkar@oracle.com authored
      Two different threads with different rds sockets may be in
      rds_recv_rcvbuf_delta() via receive path. If their ports
      both map to the same word in the congestion map, then
      using non-atomic ops to update it could cause the map to
      be incorrect. Lets use atomics to avoid such an issue.
      
      Full credit to Wengang <wen.gang.wang@oracle.com> for
      finding the issue, analysing it and also pointing out
      to offending code with spin lock based fix.
      Reviewed-by: default avatarLeon Romanovsky <leon@leon.nu>
      Signed-off-by: default avatarWengang Wang <wen.gang.wang@oracle.com>
      Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e47db94e
    • Qing Huang's avatar
      RDS: fix endianness for dp_ack_seq · a7c55654
      Qing Huang authored
      dp->dp_ack_seq is used in big endian format. We need to do the
      big endianness conversion when we assign a value in host format
      to it.
      Signed-off-by: default avatarQing Huang <qing.huang@oracle.com>
      Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a7c55654
    • Daniel Borkmann's avatar
      vlan: pull on __vlan_insert_tag error path and fix csum correction · 9241e2df
      Daniel Borkmann authored
      When __vlan_insert_tag() fails from skb_vlan_push() path due to the
      skb_cow_head(), we need to undo the __skb_push() in the error path
      as well that was done earlier to move skb->data pointer to mac header.
      
      Moreover, I noticed that when in the non-error path the __skb_pull()
      is done and the original offset to mac header was non-zero, we fixup
      from a wrong skb->data offset in the checksum complete processing.
      
      So the skb_postpush_rcsum() really needs to be done before __skb_pull()
      where skb->data still points to the mac header start and thus operates
      under the same conditions as in __vlan_insert_tag().
      
      Fixes: 93515d53 ("net: move vlan pop/push functions into common code")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9241e2df
  5. 15 Apr, 2016 5 commits
    • Andrew Goodbody's avatar
      cpsw: Prevent NUll pointer dereference with two PHYs · cfe25560
      Andrew Goodbody authored
      Adding a 2nd PHY to cpsw results in a NULL pointer dereference
      as below. Fix by maintaining a reference to each PHY node in slave
      struct instead of a single reference in the priv struct which was
      overwritten by the 2nd PHY.
      
      [   17.870933] Unable to handle kernel NULL pointer dereference at virtual address 00000180
      [   17.879557] pgd = dc8bc000
      [   17.882514] [00000180] *pgd=9c882831, *pte=00000000, *ppte=00000000
      [   17.889213] Internal error: Oops: 17 [#1] ARM
      [   17.893838] Modules linked in:
      [   17.897102] CPU: 0 PID: 1657 Comm: connmand Not tainted 4.5.0-ge463dfb-dirty #11
      [   17.904947] Hardware name: Cambrionix whippet
      [   17.909576] task: dc859240 ti: dc968000 task.ti: dc968000
      [   17.915339] PC is at phy_attached_print+0x18/0x8c
      [   17.920339] LR is at phy_attached_info+0x14/0x18
      [   17.925247] pc : [<c042baec>]    lr : [<c042bb74>]    psr: 600f0113
      [   17.925247] sp : dc969cf8  ip : dc969d28  fp : dc969d18
      [   17.937425] r10: dda7a400  r9 : 00000000  r8 : 00000000
      [   17.942971] r7 : 00000001  r6 : ddb00480  r5 : ddb8cb34  r4 : 00000000
      [   17.949898] r3 : c0954cc0  r2 : c09562b0  r1 : 00000000  r0 : 00000000
      [   17.956829] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
      [   17.964401] Control: 10c5387d  Table: 9c8bc019  DAC: 00000051
      [   17.970500] Process connmand (pid: 1657, stack limit = 0xdc968210)
      [   17.977059] Stack: (0xdc969cf8 to 0xdc96a000)
      [   17.981692] 9ce0:                                                       dc969d28 dc969d08
      [   17.990386] 9d00: c038f9bc c038f6b4 ddb00480 dc969d34 dc969d28 c042bb74 c042bae4 00000000
      [   17.999080] 9d20: c09562b0 c0954cc0 dc969d5c dc969d38 c043ebfc c042bb6c 00000007 00000003
      [   18.007773] 9d40: ddb00000 ddb8cb58 ddb00480 00000001 dc969dec dc969d60 c0441614 c043ea68
      [   18.016465] 9d60: 00000000 00000003 00000000 fffffff4 dc969df4 0000000d 00000000 00000000
      [   18.025159] 9d80: dc969db4 dc969d90 c005dc08 c05839e0 dc969df4 0000000d ddb00000 00001002
      [   18.033851] 9da0: 00000000 00000000 dc969dcc dc969db8 c005ddf4 c005dbc8 00000000 00000118
      [   18.042544] 9dc0: dc969dec dc969dd0 ddb00000 c06db27c ffff9003 00001002 00000000 00000000
      [   18.051237] 9de0: dc969e0c dc969df0 c057c88c c04410dc dc969e0c ddb00000 ddb00000 00000001
      [   18.059930] 9e00: dc969e34 dc969e10 c057cb44 c057c7d8 ddb00000 ddb00138 00001002 beaeda20
      [   18.068622] 9e20: 00000000 00000000 dc969e5c dc969e38 c057cc28 c057cac0 00000000 dc969e80
      [   18.077315] 9e40: dda7a40c beaeda20 00000000 00000000 dc969ecc dc969e60 c05e36d0 c057cc14
      [   18.086007] 9e60: dc969e84 00000051 beaeda20 00000000 dda7a40c 00000014 ddb00000 00008914
      [   18.094699] 9e80: 30687465 00000000 00000000 00000000 00009003 00000000 00000000 00000000
      [   18.103391] 9ea0: 00001002 00008914 dd257ae0 beaeda20 c098a428 beaeda20 00000011 00000000
      [   18.112084] 9ec0: dc969edc dc969ed0 c05e4e54 c05e3030 dc969efc dc969ee0 c055f5ac c05e4cc4
      [   18.120777] 9ee0: beaeda20 dd257ae0 dc8ab4c0 00008914 dc969f7c dc969f00 c010b388 c055f45c
      [   18.129471] 9f00: c071ca40 dd257ac0 c00165e8 dc968000 dc969f3c dc969f20 dc969f64 dc969f28
      [   18.138164] 9f20: c0115708 c0683ec8 dd257ac0 dd257ac0 dc969f74 dc969f40 c055f350 c00fc66c
      [   18.146857] 9f40: dd82e4d0 00000011 00000000 00080000 dd257ac0 00000000 dc8ab4c0 dc8ab4c0
      [   18.155550] 9f60: 00008914 beaeda20 00000011 00000000 dc969fa4 dc969f80 c010bc34 c010b2fc
      [   18.164242] 9f80: 00000000 00000011 00000002 00000036 c00165e8 dc968000 00000000 dc969fa8
      [   18.172935] 9fa0: c00163e0 c010bbcc 00000000 00000011 00000011 00008914 beaeda20 00009003
      [   18.181628] 9fc0: 00000000 00000011 00000002 00000036 00081018 00000001 00000000 beaedc10
      [   18.190320] 9fe0: 00083188 beaeda1c 00043a5d b6d29c0c 600b0010 00000011 00000000 00000000
      [   18.198989] Backtrace:
      [   18.201621] [<c042bad8>] (phy_attached_print) from [<c042bb74>] (phy_attached_info+0x14/0x18)
      [   18.210664]  r3:c0954cc0 r2:c09562b0 r1:00000000
      [   18.215588]  r4:ddb00480
      [   18.218322] [<c042bb60>] (phy_attached_info) from [<c043ebfc>] (cpsw_slave_open+0x1a0/0x280)
      [   18.227293] [<c043ea5c>] (cpsw_slave_open) from [<c0441614>] (cpsw_ndo_open+0x544/0x674)
      [   18.235874]  r7:00000001 r6:ddb00480 r5:ddb8cb58 r4:ddb00000
      [   18.241944] [<c04410d0>] (cpsw_ndo_open) from [<c057c88c>] (__dev_open+0xc0/0x128)
      [   18.249972]  r9:00000000 r8:00000000 r7:00001002 r6:ffff9003 r5:c06db27c r4:ddb00000
      [   18.258255] [<c057c7cc>] (__dev_open) from [<c057cb44>] (__dev_change_flags+0x90/0x154)
      [   18.266745]  r5:00000001 r4:ddb00000
      [   18.270575] [<c057cab4>] (__dev_change_flags) from [<c057cc28>] (dev_change_flags+0x20/0x50)
      [   18.279523]  r9:00000000 r8:00000000 r7:beaeda20 r6:00001002 r5:ddb00138 r4:ddb00000
      [   18.287811] [<c057cc08>] (dev_change_flags) from [<c05e36d0>] (devinet_ioctl+0x6ac/0x76c)
      [   18.296483]  r9:00000000 r8:00000000 r7:beaeda20 r6:dda7a40c r5:dc969e80 r4:00000000
      [   18.304762] [<c05e3024>] (devinet_ioctl) from [<c05e4e54>] (inet_ioctl+0x19c/0x1c8)
      [   18.312882]  r10:00000000 r9:00000011 r8:beaeda20 r7:c098a428 r6:beaeda20 r5:dd257ae0
      [   18.321235]  r4:00008914
      [   18.323956] [<c05e4cb8>] (inet_ioctl) from [<c055f5ac>] (sock_ioctl+0x15c/0x2d8)
      [   18.331829] [<c055f450>] (sock_ioctl) from [<c010b388>] (do_vfs_ioctl+0x98/0x8d0)
      [   18.339765]  r7:00008914 r6:dc8ab4c0 r5:dd257ae0 r4:beaeda20
      [   18.345822] [<c010b2f0>] (do_vfs_ioctl) from [<c010bc34>] (SyS_ioctl+0x74/0x84)
      [   18.353573]  r10:00000000 r9:00000011 r8:beaeda20 r7:00008914 r6:dc8ab4c0 r5:dc8ab4c0
      [   18.361924]  r4:00000000
      [   18.364653] [<c010bbc0>] (SyS_ioctl) from [<c00163e0>] (ret_fast_syscall+0x0/0x3c)
      [   18.372682]  r9:dc968000 r8:c00165e8 r7:00000036 r6:00000002 r5:00000011 r4:00000000
      [   18.380960] Code: e92dd810 e24cb010 e24dd010 e59b4004 (e5902180)
      [   18.387580] ---[ end trace c80529466223f3f3 ]---
      Signed-off-by: default avatarAndrew Goodbody <andrew.goodbody@cambrionix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfe25560
    • Felix Fietkau's avatar
      bgmac: fix MAC soft-reset bit for corerev > 4 · c02bc350
      Felix Fietkau authored
      Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly
      fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means
      only some devices as most of BCM4708A0KF-s got core rev 4).
      This was tested for regressions on BCM47094 which doesn't seem to care
      which bit gets used.
      Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
      Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c02bc350
    • David S. Miller's avatar
      Merge branch 'soreuseport-mixed-v4-v6-fixes' · 01c445a4
      David S. Miller authored
      Craig Gallek says:
      
      ====================
      Fixes for SO_REUSEPORT and mixed v4/v6 sockets
      
      Recent changes to the datastructures associated with SO_REUSEPORT broke
      an existing behavior when equivalent SO_REUSEPORT sockets are created
      using both AF_INET and AF_INET6.  This patch series restores the previous
      behavior and includes a test to validate it.
      
      This series should be a trivial merge to stable kernels (if deemed
      necessary), but will have conflicts in net-next.  The following patches
      recently replaced the use of hlist_nulls with hlists for UDP and TCP
      socket lists:
      ca065d0c ("udp: no longer use SLAB_DESTROY_BY_RCU")
      3b24d854 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
      
      If this series is accepted, I will send an RFC for the net-next change
      to assist with the merge.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      01c445a4
    • Craig Gallek's avatar
      soreuseport: test mixed v4/v6 sockets · d6a61f80
      Craig Gallek authored
      Test to validate the behavior of SO_REUSEPORT sockets that are
      created with both AF_INET and AF_INET6.  See the commit prior to this
      for a description of this behavior.
      Signed-off-by: default avatarCraig Gallek <kraig@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d6a61f80
    • Craig Gallek's avatar
      soreuseport: fix ordering for mixed v4/v6 sockets · d894ba18
      Craig Gallek authored
      With the SO_REUSEPORT socket option, it is possible to create sockets
      in the AF_INET and AF_INET6 domains which are bound to the same IPv4 address.
      This is only possible with SO_REUSEPORT and when not using IPV6_V6ONLY on
      the AF_INET6 sockets.
      
      Prior to the commits referenced below, an incoming IPv4 packet would
      always be routed to a socket of type AF_INET when this mixed-mode was used.
      After those changes, the same packet would be routed to the most recently
      bound socket (if this happened to be an AF_INET6 socket, it would
      have an IPv4 mapped IPv6 address).
      
      The change in behavior occurred because the recent SO_REUSEPORT optimizations
      short-circuit the socket scoring logic as soon as they find a match.  They
      did not take into account the scoring logic that favors AF_INET sockets
      over AF_INET6 sockets in the event of a tie.
      
      To fix this problem, this patch changes the insertion order of AF_INET
      and AF_INET6 addresses in the TCP and UDP socket lists when the sockets
      have SO_REUSEPORT set.  AF_INET sockets will be inserted at the head of the
      list and AF_INET6 sockets with SO_REUSEPORT set will always be inserted at
      the tail of the list.  This will force AF_INET sockets to always be
      considered first.
      
      Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection")
      Fixes: 125e80b88687 ("soreuseport: fast reuseport TCP socket selection")
      Reported-by: default avatarMaciej Żenczykowski <maze@google.com>
      Signed-off-by: default avatarCraig Gallek <kraig@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d894ba18