1. 04 Feb, 2015 12 commits
  2. 03 Feb, 2015 18 commits
    • Johan Hedberg's avatar
      Bluetooth: Fix potential NULL dereference · 88d9077c
      Johan Hedberg authored
      The bnep_get_device function may be triggered by an ioctl just after a
      connection has gone down. In such a case the respective L2CAP chan->conn
      pointer will get set to NULL (by l2cap_chan_del). This patch adds a
      missing NULL check for this case in the bnep_get_device() function.
      Reported-by: default avatarPatrik Flykt <patrik.flykt@linux.intel.com>
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      88d9077c
    • Matej Dubovy's avatar
      Bluetooth: btusb: Add support for Lite-On (04ca) Broadcom based, BCM43142 · 8f0c304c
      Matej Dubovy authored
      Please add support for sub BT chip on the combo card
      Broadcom 43142A0 (in Lenovo E145), 04ca:2007
      
      /sys/kernel/debug/usb/devices
      
      T:  Bus=05 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
      D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
      P:  Vendor=04ca ProdID=2007 Rev= 1.12
      S:  Manufacturer=Broadcom Corp
      S:  Product=BCM43142A0
      S:  SerialNumber=28E347EC73BD
      C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
      I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
      E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
      I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
      I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
      I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
      I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
      I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
      E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
      E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
      I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
      E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
      E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
      I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
      
      Firmware for 04ca:2007 can be extracted from the latest Lenovo E145
      Bluetooth driver for Windows (driver is however described as BCM20702
      but contains also firwmare for BCM43142).
      Search for BCM43142A0_001.001.011.0122.0153.hex within hex files, then
      it must be converted using hex2hcd utility. Rename file to
      BCM43142A0-04ca-2007.hcd, then move to /lib/firmware/brcm/.
      Signed-off-by: default avatarMatej Dubovy <matej.dubovy@gmail.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Cc: stable@vger.kernel.org
      8f0c304c
    • Markus Elfring's avatar
      net: sctp: Deletion of an unnecessary check before the function call "kfree" · 7d37d0c1
      Markus Elfring authored
      The kfree() function tests whether its argument is NULL and then
      returns immediately. Thus the test around the call is not needed.
      
      This issue was detected by using the Coccinelle software.
      Signed-off-by: default avatarMarkus Elfring <elfring@users.sourceforge.net>
      Acked-By: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d37d0c1
    • David S. Miller's avatar
      Merge branch 'udpv6_lockless_send' · 193cdc4a
      David S. Miller authored
      Vladislav Yasevich says:
      
      ====================
      ipv6: Add lockless UDP send path
      
      This series introduces a lockless UDPv6 send path similar to
      what Herbert Xu did for IPv4 a while ago.
      
      There are some difference from IPv4.  IPv6 caching for flow
      label is a bit different, as well as it requires another cork
      cork structure that holds the IPv6 ancillary data.
      
      Please take a look.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      193cdc4a
    • Vlad Yasevich's avatar
      ipv6: Allow for partial checksums on non-ufo packets · 32dce968
      Vlad Yasevich authored
      Currntly, if we are not doing UFO on the packet, all UDP
      packets will start with CHECKSUM_NONE and thus perform full
      checksum computations in software even if device support
      IPv6 checksum offloading.
      
      Let's start start with CHECKSUM_PARTIAL if the device
      supports it and we are sending only a single packet at
      or below mtu size.
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      32dce968
    • Vlad Yasevich's avatar
      udpv6: Add lockless sendmsg() support · 03485f2a
      Vlad Yasevich authored
      This commit adds the same functionaliy to IPv6 that
      commit 903ab86d
      Author: Herbert Xu <herbert@gondor.apana.org.au>
      Date:   Tue Mar 1 02:36:48 2011 +0000
      
          udp: Add lockless transmit path
      
      added to IPv4.
      
      UDP transmit path can now run without a socket lock,
      thus allowing multiple threads to send to a single socket
      more efficiently.
      This is only used when corking/MSG_MORE is not used.
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      03485f2a
    • Vlad Yasevich's avatar
      ipv6: Introduce udpv6_send_skb() · d39d938c
      Vlad Yasevich authored
      Now that we can individually construct IPv6 skbs to send, add a
      udpv6_send_skb() function to populate the udp header and send the
      skb.  This allows udp_v6_push_pending_frames() to re-use this
      function as well as enables us to add lockless sendmsg() support.
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d39d938c
    • Vlad Yasevich's avatar
      ipv6: introduce ipv6_make_skb · 6422398c
      Vlad Yasevich authored
      This commit is very similar to
      commit 1c32c5ad
      Author: Herbert Xu <herbert@gondor.apana.org.au>
      Date:   Tue Mar 1 02:36:47 2011 +0000
      
          inet: Add ip_make_skb and ip_finish_skb
      
      It adds IPv6 version of the helpers ip6_make_skb and ip6_finish_skb.
      
      The job of ip6_make_skb is to collect messages into an ipv6 packet
      and poplulate ipv6 eader.  The job of ip6_finish_skb is to transmit
      the generated skb.  Together they replicated the job of
      ip6_push_pending_frames() while also provide the capability to be
      called independently.  This will be needed to add lockless UDP sendmsg
      support.
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6422398c
    • Vlad Yasevich's avatar
      ipv6: Append sending data to arbitrary queue · 0bbe84a6
      Vlad Yasevich authored
      Add the ability to append data to arbitrary queue.  This
      will be needed later to implement lockless UDP sends.
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0bbe84a6
    • Vlad Yasevich's avatar
      ipv6: pull cork initialization into its own function. · 366e41d9
      Vlad Yasevich authored
      Pull IPv6 cork initialization into its own function that
      can be re-used.  IPv6 specific cork data did not have an
      explicit data structure.  This patch creats eone so that
      just ipv6 cork data can be as arguemts.  Also, since
      IPv6 tries to save the flow label into inet_cork_full
      tructure, pass the full cork.
      
      Adjust ip6_cork_release() to take cork data structures.
      Signed-off-by: default avatarVladislav Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      366e41d9
    • Anish Bhatt's avatar
      cxgb4 : Improve IEEE DCBx support, other minor open-lldp fixes · ba0c39cb
      Anish Bhatt authored
      * Add support for IEEE ets & pfc api.
      * Fix bug that resulted in incorrect bandwidth percentage being returned for
        CEE peers
      * Convert pfc enabled info from firmware format to what dcbnl expects before
        returning
      Signed-off-by: default avatarAnish Bhatt <anish@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ba0c39cb
    • Arnd Bergmann's avatar
      net/tulip: don't warn about unknown ARM architecture · 98830dd0
      Arnd Bergmann authored
      ARM has 32-byte cache lines, which according to the comment in
      the init registers function seems to work best with the default
      value of 0x4800 that is also used on sparc and parisc.
      
      This adds ARM to the same list, to use that default but no
      longer warn about it.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarGrant Grundler <grundler@parisc-linux.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98830dd0
    • Arnd Bergmann's avatar
      net: hip04: add missing MODULE_LICENSE · 4c0c46be
      Arnd Bergmann authored
      The hip04 ethernet driver causes a new compile-time warning
      when built as a loadable module:
      
      WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/hisilicon/hip04_eth.o
      see include/linux/module.h for more information
      
      This adds the license as "GPL", which matches the header of the file.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarDing Tianhong <dingtianhong@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4c0c46be
    • Florian Westphal's avatar
      net: dctcp: loosen requirement to assert ECT(0) during 3WHS · 843c2fdf
      Florian Westphal authored
      One deployment requirement of DCTCP is to be able to run
      in a DC setting along with TCP traffic. As Glenn Judd's
      NSDI'15 paper "Attaining the Promise and Avoiding the Pitfalls
      of TCP in the Datacenter" [1] (tba) explains, one way to
      solve this on switch side is to split DCTCP and TCP traffic
      in two queues per switch port based on the DSCP: one queue
      soley intended for DCTCP traffic and one for non-DCTCP traffic.
      
      For the DCTCP queue, there's the marking threshold K as
      explained in commit e3118e83 ("net: tcp: add DCTCP congestion
      control algorithm") for RED marking ECT(0) packets with CE.
      For the non-DCTCP queue, there's f.e. a classic tail drop queue.
      As already explained in e3118e83, running DCTCP at scale
      when not marking SYN/SYN-ACK packets with ECT(0) has severe
      consequences as for non-ECT(0) packets, traversing the RED
      marking DCTCP queue will result in a severe reduction of
      connection probability.
      
      This is due to the DCTCP queue being dominated by ECT(0) traffic
      and switches handle non-ECT traffic in the RED marking queue
      after passing K as drops, where K is usually a low watermark
      in order to leave enough tailroom for bursts. Splitting DCTCP
      traffic among several queues (ECN and non-ECN queue) is being
      considered a terrible idea in the network community as it
      splits single flows across multiple network paths.
      
      Therefore, commit e3118e83 implements this on Linux as
      ECT(0) marked traffic, as we argue that marking all packets
      of a DCTCP flow is the only viable solution and also doesn't
      speak against the draft.
      
      However, recently, a DCTCP implementation for FreeBSD hit also
      their mainline kernel [2]. In order to let them play well
      together with Linux' DCTCP, we would need to loosen the
      requirement that ECT(0) has to be asserted during the 3WHS as
      not implemented in FreeBSD. This simplifies the ECN test and
      lets DCTCP work together with FreeBSD.
      
      Joint work with Daniel Borkmann.
      
        [1] https://www.usenix.org/conference/nsdi15/technical-sessions/presentation/judd
        [2] https://github.com/freebsd/freebsd/commit/8ad879445281027858a7fa706d13e458095b595fSigned-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Cc: Glenn Judd <glenn.judd@morganstanley.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      843c2fdf
    • David S. Miller's avatar
      Merge branch 'net-timestamp' · 69422416
      David S. Miller authored
      Willem de Bruijn says:
      
      ====================
      net-timestamp: blinding
      
      Changes
        (v2 -> v3)
        - rebase only: v2 did not make it to patchwork / netdev
        (v1 -> v2)
        - fix capability check in patch 2
            this could be moved into net/core/sock.c as sk_capable_nouser()
        (rfc -> v1)
        - dropped patch 4: timestamp batching
            due to complexity, as discussed
        - dropped patch 5: default mode
            because it does not really cover all use cases, as discussed
        - added documentation
        - minor fix, see patch 2
      
      Two issues were raised during recent timestamping discussions:
      1. looping full packets on the error queue exposes packet headers
      2. TCP timestamping with retransmissions generates many timestamps
      
      This RFC patchset is an attempt at addressing both without breaking
      legacy behavior.
      
      Patch 1 reintroduces the "no payload" timestamp option, which loops
      timestamps onto an empty skb. This reduces the pressure on SO_RCVBUF
      from looping many timestamps. It does not reduce the number of recv()
      calls needed to process them. The timestamp cookie mechanism developed
      in http://patchwork.ozlabs.org/patch/427213/ did, but this is
      considerably simpler.
      
      Patch 2 then gives administrators the power to block all timestamp
      requests that contain data by unprivileged users. I proposed this
      earlier as a backward compatible workaround in the discussion of
      
        net-timestamp: pull headers for SOCK_STREAM
        http://patchwork.ozlabs.org/patch/414810/
      
      Patch 3 only updates the txtimestamp example to test this option.
      Verified that with option '-n', length is zero in all cases and
      option '-I' (PKTINFO) stops working.
      ====================
      Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      69422416
    • Willem de Bruijn's avatar
      net-timestamp: no-payload option in txtimestamp test · 23685923
      Willem de Bruijn authored
      Demonstrate how SOF_TIMESTAMPING_OPT_TSONLY can be used and
      test the implementation.
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      23685923
    • Willem de Bruijn's avatar
      net-timestamp: no-payload only sysctl · b245be1f
      Willem de Bruijn authored
      Tx timestamps are looped onto the error queue on top of an skb. This
      mechanism leaks packet headers to processes unless the no-payload
      options SOF_TIMESTAMPING_OPT_TSONLY is set.
      
      Add a sysctl that optionally drops looped timestamp with data. This
      only affects processes without CAP_NET_RAW.
      
      The policy is checked when timestamps are generated in the stack.
      It is possible for timestamps with data to be reported after the
      sysctl is set, if these were queued internally earlier.
      
      No vulnerability is immediately known that exploits knowledge
      gleaned from packet headers, but it may still be preferable to allow
      administrators to lock down this path at the cost of possible
      breakage of legacy applications.
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      
      ----
      
      Changes
        (v1 -> v2)
        - test socket CAP_NET_RAW instead of capable(CAP_NET_RAW)
        (rfc -> v1)
        - document the sysctl in Documentation/sysctl/net.txt
        - fix access control race: read .._OPT_TSONLY only once,
              use same value for permission check and skb generation.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b245be1f
    • Willem de Bruijn's avatar
      net-timestamp: no-payload option · 49ca0d8b
      Willem de Bruijn authored
      Add timestamping option SOF_TIMESTAMPING_OPT_TSONLY. For transmit
      timestamps, this loops timestamps on top of empty packets.
      
      Doing so reduces the pressure on SO_RCVBUF. Payload inspection and
      cmsg reception (aside from timestamps) are no longer possible. This
      works together with a follow on patch that allows administrators to
      only allow tx timestamping if it does not loop payload or metadata.
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      
      ----
      
      Changes (rfc -> v1)
        - add documentation
        - remove unnecessary skb->len test (thanks to Richard Cochran)
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49ca0d8b
  3. 02 Feb, 2015 10 commits
    • Johan Hedberg's avatar
      Bluetooth: Remove mgmt_rp_read_local_oob_ext_data struct · 66f096f7
      Johan Hedberg authored
      This extended return parameters struct conflicts with the new Read Local
      OOB Extended Data command definition. To avoid the conflict simply
      rename the old "extended" version to the normal one and update the code
      appropriately to take into account the two possible response PDU sizes.
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      66f096f7
    • Marcel Holtmann's avatar
      Bluetooth: Set HCI_QUIRK_STRICT_DUPLICATE_FILTER for BTUSB_INTEL_NEW · b970c5ba
      Marcel Holtmann authored
      The Intel Snowfield Peak Bluetooth controllers use a strict scanning
      filter policy that filters based on Bluetooth device addresses and
      not on RSSI.
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
      b970c5ba
    • Jakub Pawlowski's avatar
      Bluetooth: Add restarting to service discovery · 4b0e0ced
      Jakub Pawlowski authored
      When using LE_SCAN_FILTER_DUP_ENABLE, some controllers would send
      advertising report from each LE device only once. That means that we
      don't get any updates on RSSI value, and makes Service Discovery very
      slow. This patch adds restarting scan when in Service Discovery, and
      device with filtered uuid is found, but it's not in RSSI range to send
      event yet. This way if device moves into range, we will quickly get RSSI
      update.
      Signed-off-by: default avatarJakub Pawlowski <jpawlowski@google.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      4b0e0ced
    • Jakub Pawlowski's avatar
      Bluetooth: Add le_scan_restart work for LE scan restarting · 2d28cfe7
      Jakub Pawlowski authored
      Currently there is no way to restart le scan, and it's needed in
      service scan method. The way it work: it disable, and then enable le
      scan on controller.
      
      During the restart, we must remember when the scan was started, and
      it's duration, to later re-schedule the le_scan_disable work, that was
      stopped during the stop scan phase.
      Signed-off-by: default avatarJakub Pawlowski <jpawlowski@google.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      2d28cfe7
    • David Ahern's avatar
      net: rocker: Add support for retrieving port level statistics · 9766e97a
      David Ahern authored
      Add support for retrieving port level statistics from device.
      Hook is added for ethtool's stats functionality. For example,
      
      $ ethtool -S eth3
      NIC statistics:
           rx_packets: 12
           rx_bytes: 2790
           rx_dropped: 0
           rx_errors: 0
           tx_packets: 8
           tx_bytes: 728
           tx_dropped: 0
           tx_errors: 0
      Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
      Acked-by: default avatarScott Feldman <sfeldma@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9766e97a
    • David S. Miller's avatar
      Merge branch 'switchdev_offload_flags' · fe3ef616
      David S. Miller authored
      Roopa Prabhu says:
      
      ====================
      switchdev offload flags
      
      This patch series introduces new offload flags for switchdev.
      Kernel network subsystems can use this flag to accelerate
      network functions by offloading to hw.
      
      I expect that there will be need for subsystem specific feature
      flag in the future.
      
      This patch series currently only addresses bridge driver link
      attribute offloads to hardware.
      
      Looking at the current state of bridge l2 offload in the kernel,
          - flag 'self' is the way to directly manage the bridge device in hw via
            the ndo_bridge_setlink/ndo_bridge_getlink calls
      
          - flag 'master' is always used to manage the in kernel bridge devices
            via the same ndo_bridge_setlink/ndo_bridge_getlink calls
      
      Today these are used separately. The nic offloads use hwmode "vepa/veb" to go
      directly to hw with the "self" flag.
      
      At this point i am trying not to introduce any new user facing flags/attributes.
      In the model where we want the kernel bridging to be accelerated with
      hardware, we very much want the bridge driver to be involved.
      
      In this proposal,
      - The offload flag/bit helps switch asic drivers to indicate that they
        accelerate the kernel networking objects/functions
      - The user does not have to specify a new flag to do so. A bridge created with
        switch asic ports will be accelerated if the switch driver supports it.
      - The user can continue to directly manage l2 in nics (ixgbe) using the
        existing hwmode/self flags
      - It also does not stop users from using the 'self' flag to talk to the
        switch asic driver directly
      - Involving the bridge driver makes sure the add/del notifications to user
        space go out after both kernel and hardware are programmed
      
      (To selectively offload bridge port attributes,
      example learning in hw only etc, we can introduce offload bits for
      per bridge port flag attribute as in my previous patch
      https://patchwork.ozlabs.org/patch/413211/. I have not included that in this
      series)
      
      v2
         - try a different name for the offload flag/bit
         - tries to solve the stacked netdev case by traversing the lowerdev
           list to reach the switch port
      
      v3 -
          - Tested with bond as bridge port for the stacked device case.
            Includes a bond_fix_features change to not ignore the
            NETIF_F_HW_NETFUNC_OFFLOAD flag
          - Some checkpatch fixes
      
      v4 -
          - rename flag to NETIF_F_HW_SWITCH_OFFLOAD
          - add ndo_bridge_setlink/dellink handlers in bond and team drivers as
            suggested by jiri.
          - introduce default ndo_dflt_netdev_switch_port_bridge_setlink/dellink
          handlers that masters can use to call offload api on lowerdevs.
      ====================
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      fe3ef616
    • Roopa Prabhu's avatar
      team: handle NETIF_F_HW_SWITCH_OFFLOAD flag and add ndo_bridge_setlink/dellink handlers · a16a8ee7
      Roopa Prabhu authored
      Currently ndo_bridge_setlink and ndo_bridge_dellink handlers point
      to the default switchdev handlers
      
      This follows my bonding driver changes.
      
      I have only compile tested this patch. However similar
      bonding code has been tested.
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a16a8ee7
    • Roopa Prabhu's avatar
      bonding: handle NETIF_F_HW_SWITCH_OFFLOAD flag and add ndo_bridge_setlink/dellink handlers · c158cba3
      Roopa Prabhu authored
      We want bond to pick up the offload flag if any of its slaves have it.
      
      NETIF_F_HW_SWITCH_OFFLOAD flag is added to the mask, so that
      netdev_increment_features does not ignore it.
      
      This also adds ndo_bridge_setlink and ndo_bridge_dellink handlers.
      These currently point to the default handlers provided by the
      switchdev api.
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c158cba3
    • Roopa Prabhu's avatar
      rocker: set feature NETIF_F_HW_SWITCH_OFFLOAD · eb0ac420
      Roopa Prabhu authored
      This patch sets the NETIF_F_HW_SWITCH_OFFLOAD feature flag on rocker ports
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb0ac420
    • Roopa Prabhu's avatar
      bridge: offload bridge port attributes to switch asic if feature flag set · 68e331c7
      Roopa Prabhu authored
      This patch adds support to set/del bridge port attributes in hardware from
      the bridge driver.
      
      With this, when the user sends a bridge setlink message with no flags or
      master flags set,
         - the bridge driver ndo_bridge_setlink handler sets settings in the kernel
         - calls the swicthdev api to propagate the attrs to the switchdev
      	hardware
      
         You can still use the self flag to go to the switch hw or switch port
         driver directly.
      
      With this, it also makes sure a notification goes out only after the
      attributes are set both in the kernel and hw.
      
      The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set.
      This is because the offload cases with BRIDGE_FLAGS_SELF are handled in
      the caller (in rtnetlink.c).
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      68e331c7