For each case, only log the last regmap access, so it doesn't get
overwritten, and as all regmap access should show the same issues
logging the last one should be enough.
Change to dev_err to log this error.

Also, differentiate between a regmap access failure and invalid
playback action.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-13-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Remove cs35l41_hd_reg_sequence as it adds a layer of flexibility not needed.
As cs35l41_hda_(start/stop)_bst is a single register, it can be replaced by
regmap_update_bits with usleep_range to wait for the same 3000us that
reg_sequence had.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-12-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Having CS35L41_PWR_CTRL2 on cs35l41_hda_config overwrites the boost
configuration for internal boost.
So move it to the initialization part and use regmap_update_bits to
only change the correct bits.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-11-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Internal Boost enable is the default option from reset, but with
external boost support, internal boost must be disabled.
Add the enable of internal boost in cs35l41_boost_config to
centralize the internal boost configuration.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-10-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Mute the device before shutdown to avoid pops and clicks for all types
of boost.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-9-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

To facilitate the configuration of external boost devices, put all
devices, with or without VSPK switch, into safe mode from the start.
That allows the following parts of the driver to handle all external
boost devices in the same way.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-8-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Replace vspk_always_on by a enum that better characterizes the boost
type, as there is 3 types of boost hardware.
And with the new boost type other parts of the driver can better handle
the configuration of the chip.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-7-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The dai configuration is always the same and should always configured
during the opening the stream.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-6-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix clock and slot size comments
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-5-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

ASoC and HDA can use a single function to configure the chip gpios.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-4-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The driver can receive an empty hw_config, so mark as valid if
successfully read from device tree/ACPI or set by the driver itself.
Platforms not marked with a valid hw config will not be supported.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-3-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Both ASoC and HDA require to configure the GPIOs and Boost, so
create a single shared struct for hardware configuration.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-2-tanureal@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Pull serial driver fix from Greg KH:
 "This is a single serial driver fix for a build issue that showed up
  due to changes that came in through the tty tree in 5.18-rc1 that were
  missed previously. It resolves a build error with the mpc52xx_uart
  driver.

  It has been in linux-next this week with no reported problems"

* tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for 5.18-rc2 that resolves an
  endian issue for the r8188eu driver. It has been in linux-next all
  this week with no reported problems"

* tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Fix PPPoE tag insertion on little endian systems

Merge tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here are two small driver core changes for 5.18-rc2.

  They are the final bits in the removal of the default_attrs field in
  struct kobj_type. I had to wait until after 5.18-rc1 for all of the
  changes to do this came in through different development trees, and
  then one new user snuck in. So this series has two changes:

   - removal of the default_attrs field in the powerpc/pseries/vas code.

     The change has been acked by the PPC maintainers to come through
     this tree

   - removal of default_attrs from struct kobj_type now that all
     in-kernel users are removed.

     This cleans up the kobject code a little bit and removes some
     duplicated functionality that confused people (now there is only
     one way to do default groups)

  Both of these have been in linux-next for all of this week with no
  reported problems"

* tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: kobj_type: remove default_attrs
  powerpc/pseries/vas: use default_groups in kobj_type

Pull char/misc driver fix from Greg KH:
 "A single driver fix. It resolves the build warning issue on 32bit
  systems in the habannalabs driver that came in during the 5.18-rc1
  merge cycle.

  It has been in linux-next for all this week with no reported problems"

* tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  habanalabs: Fix test build failures

Pull powerpc fixes from Michael Ellerman:

 - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
   guest could be lost (or delayed until the next guest exit).

 - Disable SCV (system call vectored) when PR KVM guests could be run.

 - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
   guests.

 - Add a new KVM CAP to indicate if AIL == 3 is supported.

 - Fix a regression when hotplugging a CPU to a memoryless/cpuless node.

 - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
   fixes crashes seen due to hardened usercopy.

 - Revert a change to max_mapnr which broke HIGHMEM.

Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.

* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc: Set max_mapnr correctly"
  powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
  KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
  powerpc/numa: Handle partially initialized numa nodes
  powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
  KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
  KVM: PPC: Book3S PR: Disallow AIL != 0
  KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
  KVM: PPC: Book3S HV P9: Fix "lost kick" race

Pull irq fixes from Thomas Gleixner:
 "A set of interrupt chip driver fixes:

   - A fix for a long standing bug in the ARM GICv3 redistributor
     polling which uses the wrong bit number to test.

   - Prevent translation of bogus ACPI table entries which map device
     interrupts into the IPI space on ARM GICs.

   - Don't write into the pending register of ARM GICV4 before the scan
     in hardware has completed.

   - A set of build and correctness fixes for the Qualcomm MPM driver"

* tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic, gic-v3: Prevent GSI to SGI translations
  irqchip/gic-v3: Fix GICR_CTLR.RWP polling
  irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
  irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init()
  irq/qcom-mpm: Fix build error without MAILBOX

Pull x86 fixes from Borislav Petkov:

 - Fix the MSI message data struct definition

 - Use local labels in the exception table macros to avoid symbol
   conflicts with clang LTO builds

 - A couple of fixes to objtool checking of the relatively newly added
   SLS and IBT code

 - Rename a local var in the WARN* macro machinery to prevent shadowing

* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/msi: Fix msi message data shadow struct
  x86/extable: Prefer local labels in .set directives
  x86,bpf: Avoid IBT objtool warning
  objtool: Fix SLS validation for kcov tail-call replacement
  objtool: Fix IBT tail-call detection
  x86/bug: Prevent shadowing in __WARN_FLAGS
  x86/mm/tlb: Revert retpoline avoidance approach

Pull perf fixes from Borislav Petkov:

 - A couple of fixes to cgroup-related handling of perf events

 - A couple of fixes to event encoding on Sapphire Rapids

 - Pass event caps of inherited events so that perf doesn't fail wrongly
   at fork()

 - Add support for a new Raptor Lake CPU

* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Always set cpuctx cgrp when enable cgroup event
  perf/core: Fix perf_cgroup_switch()
  perf/core: Use perf_cgroup_info->active to check if cgroup is active
  perf/core: Don't pass task around when ctx sched in
  perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
  perf/x86/intel: Don't extend the pseudo-encoding to GP counters
  perf/core: Inherit event_caps
  perf/x86/uncore: Add Raptor Lake uncore support
  perf/x86/msr: Add Raptor Lake CPU support
  perf/x86/cstate: Add Raptor Lake support
  perf/x86: Add Intel Raptor Lake support

Pull locking fixes from Borislav Petkov:

 - Allow the compiler to optimize away unused percpu accesses and change
   the local_lock_* macros back to inline functions

 - A couple of fixes to static call insn patching

* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "mm/page_alloc: mark pagesets as __maybe_unused"
  Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
  x86/percpu: Remove volatile from arch_raw_cpu_ptr().
  static_call: Remove __DEFINE_STATIC_CALL macro
  static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
  static_call: Don't make __static_call_return0 static
  x86,static_call: Fix __static_call_return0 for i386

Pull scheduler fixes from Borislav Petkov:

 - Use the correct static key checking primitive on the IRQ exit path

 - Two fixes for the new forceidle balancer

* tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix compile error in dynamic_irqentry_exit_cond_resched()
  sched: Teach the forced-newidle balancer about CPU affinity limitation.
  sched/core: Fix forceidle balancing

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix the clang command line option probing and remove some options to
   filter out, fixing the build with the latest clang versions

 - Fix 'perf bench' futex and epoll benchmarks to deal with machines
   with more than 1K CPUs

 - Fix 'perf test tsc' error message when not supported

 - Remap perf ring buffer if there is no space for event, fixing perf
   usage in 32-bit ChromeOS

 - Drop objdump stderr to avoid getting stuck waiting for stdout output
   in 'perf annotate'

 - Fix up garbled output by now showing unwind error messages when
   augmenting frame in best effort mode

 - Fix perf's libperf_print callback, use the va_args eprintf() variant

 - Sync vhost and arm64 cputype headers with the kernel sources

 - Fix 'perf report --mem-mode' with ARM SPE

 - Add missing external commands ('iiostat', etc) to 'perf --list-cmds'

* tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output
  perf tools: Add external commands to list-cmds
  perf docs: Add perf-iostat link to manpages
  perf session: Remap buf if there is no space for event
  perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K
  perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K
  perf tools: Fix perf's libperf_print callback
  perf: arm-spe: Fix perf report --mem-mode
  perf unwind: Don't show unwind error messages when augmenting frame pointer stack
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  perf test tsc: Fix error message when not supported
  perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
  perf python: Fix probing for some clang command line options
  tools build: Filter out options and warnings not supported by clang
  tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
  tools include UAPI: Sync linux/vhost.h with the kernel sources

Pull cxl and nvdimm fixes from Dan Williams:

 - Fix a compile error in the nvdimm unit tests

 - Fix a shadowed variable warning in the CXL PCI driver

* tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  cxl/pci: Drop shadowed variable
  tools/testing/nvdimm: Fix security_init() symbol collision

Pull gpio fix from Bartosz Golaszewski:

 - fix a race condition with consumers accessing the fields of GPIO IRQ
   chips before they're fully initialized

* tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: Restrict usage of GPIO chip irq members before initialization

Merge tag 'irqchip-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

 - Fix GICv3 polling for RWP in redistributors

 - Reject ACPI attempts to use SGIs on GIC/GICv3

 - Fix unpredictible behaviour when making a VPE non-resident
   with GICv4

 - A couple of fixes for the newly merged qcom-mpm driver

Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org

If objdump writes to stderr it can block waiting for it to be read. As
perf doesn't read stderr then progress stops with perf waiting for
stdout output.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lexi Shao <shaolexi@huawei.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The `perf --list-cmds` output prints only internal commands, although
there is no reason for that from users' perspective.

Adding the external commands to commands array with NULL function
pointer allows printing all perf commands while not changing the logic
of command handler selection.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If a perf event doesn't fit into remaining buffer space return NULL to
remap buf and fetch the event again.

Keep the logic to error out on inadequate input from fuzzing.

This fixes perf failing on ChromeOS (with 32b userspace):

  $ perf report -v -i perf.data
  ...
  prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data?
  Error:
  failed to process sample

Fixes: 57fc032a ("perf session: Avoid infinite loop when seeing invalid header.size")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Denis Nikitin <denik@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull SCSI fixes from James Bottomley:

 - add support for new devices (ufs, mvsas)

 - a major set of fixes in lpfc

 - get rid of a driver specific ioctl in pcmraid

 - a major rework of aha152x to get rid of the scsi_pointer.

 - minor fixes and obvious changes including several spelling updates.

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
  scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
  scsi: ufs: ufshpb: Fix a NULL check on list iterator
  scsi: sd: Clean up gendisk if device_add_disk() failed
  scsi: message: fusion: Remove redundant variable dmp
  scsi: mvsas: Add PCI ID of RocketRaid 2640
  scsi: sd: sd_read_cpr() requires VPD pages
  scsi: mpt3sas: Fail reset operation if config request timed out
  scsi: sym53c500_cs: Stop using struct scsi_pointer
  scsi: ufs: ufs-pci: Add support for Intel MTL
  scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment
  scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use
  scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch"
  scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch"
  scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
  scsi: aic7xxx: Use standard PCI subsystem, subdevice defines
  scsi: ufs: qcom: Drop custom Android boot parameters
  scsi: core: sysfs: Remove comments that conflict with the actual logic
  scsi: hisi_sas: Remove stray fallthrough annotation
  scsi: virtio-scsi: Eliminate anonymous module_init & module_exit
  scsi: isci: Fix spelling mistake "doesnt" -> "doesn't"
  ...

The 'perf bench epoll' testcase fails on systems with more than 1K CPUs.

Testcase: perf bench epoll all

Result snippet:
<<>>
Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs.

perf: pthread_create: No such file or directory
<<>>

In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads
from respective bench_epoll_*  function. Though the logs shows direct
failure from pthread_create, the actual failure is from
"sched_setaffinity" returning EINVAL (invalid argument).

This happens because the default mask size in glibc is 1024. To overcome
this 1024 CPUs mask size limitation of cpu_set_t, change the mask size
using the CPU_*_S macros.

Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC
to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the
mask.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 'perf bench futex' testcase fails on systems with more than 1K CPUs.

Testcase: perf bench futex all

Failure snippet:
<<>>Running futex/hash benchmark...

perf: pthread_create: No such file or directory
<<>>

All the futex benchmarks (ie hash, lock-api, requeue, wake,
wake-parallel), pthread_create is invoked in respective bench_futex_*
function. Though the logs shows direct failure from pthread_create,
strace logs showed that actual failure is from  "sched_setaffinity"
returning EINVAL (invalid argument).

This happens because the default mask size in glibc is 1024. To overcome
this 1024 CPUs mask size limitation of cpu_set_t, change the mask size
using the CPU_*_S macros.

Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC
to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the
mask.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220406175113.87881-2-atrajeev@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

eprintf() does not expect va_list as the type of the 4th parameter.

Use veprintf() because it does.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 428dab81 ("libperf: Merge libperf_set_print() into libperf_init()")
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Since commit bb30acae ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't allow opening the file unless one of the events has
PERF_SAMPLE_DATA_SRC set.

SPE doesn't have this set even though synthetic memory data is generated
after it is decoded. Fix this issue by setting DATA_SRC on SPE events.
This has no effect on the data collected because the SPE driver doesn't
do anything with that flag and doesn't generate samples.

Fixes: bb30acae ("perf report: Bail out --mem-mode if mem info is not available")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit Fixes: b9f6fbb3 ("perf arm64: Inject missing frames when
using 'perf record --call-graph=fp'") intended to add a 'best effort'
DWARF unwind that improved the frame pointer stack in most scenarios.

It's expected that the unwind will fail sometimes, but this shouldn't be
reported as an error. It only works when the return address can be
determined from the contents of the link register alone.

Fix the error shown when the unwinder requires extra registers by adding
a new flag that suppresses error messages. This flag is not set in the
normal --call-graph=dwarf unwind mode so that behavior is not changed.

Fixes: b9f6fbb3 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

  83bea32a ("arm64: Add part number for Arm Cortex-A78AE")

That addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h'
  diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h

Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

By default `perf test tsc` does not return the error message when the
child process detected kernel does not support it. Instead, the child
process prints an error message to stderr, unfortunately stderr is
redirected to /dev/null when verbose <= 0.

This patch does:

- return TEST_SKIP to the parent process instead of TEST_OK when
  perf_read_tsc_conversion() is not supported.

- Add a new subtest of testing if TSC is supported on current
  architecture by moving exist code to a separate function.
  It avoids two places in test__perf_time_to_tsc() that return
  TEST_SKIP by doing this.

- Extend the test suite definition to contain above two subtests.
  Current test_suite and test_case structs do not support printing skip
  reason when the number of subtest less than 1. To print skip reason, it
  is necessary to extend current test suite definition.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220408084748.43707-1-chengdongli@tencent.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Using -ffat-lto-objects in the python feature test when building with
clang-13 results in:

  clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
  error: command '/usr/sbin/clang' failed with exit code 1
  cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
  make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1

Noticed when building on a docker.io/library/archlinux:base container.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>