I noticed tcpdump was giving funky timestamps for locally
generated SYNACK messages on loopback interface.

11:42:46.938990 IP 127.0.0.1.48245 > 127.0.0.2.23850: S
945476042:945476042(0) win 43690 <mss 65495,nop,nop,sackOK,nop,wscale 7>

20:28:58.502209 IP 127.0.0.2.23850 > 127.0.0.1.48245: S
3160535375:3160535375(0) ack 945476043 win 43690 <mss
65495,nop,nop,sackOK,nop,wscale 7>

This is because we need to clear skb->tstamp before
entering lower stack, otherwise net_timestamp_check()
does not set skb->tstamp.

Fixes: 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

handle_offloads() calls skb_reset_inner_headers() to store
the layer pointers to the encapsulated packet. However, we
currently push the vlag tag (if there is one) onto the packet
afterwards. This changes the MAC header for the encapsulated
packet but it is not reflected in skb->inner_mac_header, which
breaks GSO and drivers which attempt to use this for encapsulation
offloads.

Fixes: 1eaa8178 ("vxlan: Add tx-vlan offload support.")
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2015-04-09

1) We dereferenced the xfrm outer_mode too early, larval
   SAs don't have it set. Move the dereference of the
   outer mode below the larval SA check to fix it.
   From Alexey Dobriyan.

2) Fix vti6 tunnel uninit on namespace crosssing.
   From Yao Xiwei.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

"kevent" is an extremely generic name that causes trouble
if debugging for work queues is used. So change it to
something clear.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

In socfpga_dwmac_parse_data forward error code from devm_reset_control_get.
This gives the driver another chance to laod if altr,rst-mgr is loaded after
the network driver.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The numPosted field in the ERX Doorbell register is 8-bits wide.
So the max buffers that we can post at a time is 255 and not 256
which we are doing currently.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

const __read_mostly is a senseless combination. If something
is already const it cannot be __read_mostly. Remove the bogus
__read_mostly in the fou driver.

This fixes section conflicts with LTO.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
RDS: RDS-core fixes

This patch-series updates the RDS core and rds-tcp modules with
some bug fixes that were originally authored by  Andy Grover,
Zach Brown, and Chris Mason.

v2: Code review comment by Sergei Shtylov
V3: DaveM comments:
- dropped patches 3, 5 for "heuristic" changes in rds_send_xmit().
  Investigation into the root-cause of these IB-triggered changes
  produced the feedback: "I don't remember seeing "RDS: Stuck RM"
  message in last 1-1.5 years and checking with other folks. It may very
  well be some old workaround for stale connection for which long term
  fix is already made and this part of code not exercised anymore."

  Any such fixes, *if* they are needed, can/should be done in the
  IB specific RDS transport modules.

- similarly dropped the LL_SEND_FULL patch (patch 6 in v2 set)

v4: Documentation/networking/rds.txt contains incorrect references
    to "missing sysctl values for pf_rds and sol_rds in mainline".
    The sysctl values were never needed in mainline, thus fix the
    documentation.

v5: Clarify comment per http://www.spinics.net/lists/netdev/msg324220.html

v6: Re-added entire version history to cover letter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If a determined set of concurrent senders keep the send queue full,
we can loop forever inside rds_send_xmit.  This fix has two parts.

First we are dropping out of the while(1) loop after we've processed a
large batch of messages.

Second we add a generation number that gets bumped each time the
xmit bit lock is acquired.  If someone else has jumped in and
made progress in the queue, we skip our goto restart.

Original patch by Chris Mason.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Passive connections were added for the case where one loopback IB
connection between identical addresses needs another connection to store
the second QP.  Unfortunately, they were also created in the case where
the addesses differ and we already have both QPs.

This lead to a message reordering bug.

- two different IB interfaces and addresses on a machine: A B
- traffic is sent from A to B
- connection from A-B is created, connect request sent
- listening accepts connect request, B-A is created
- traffic flows, next_rx is incremented
- unacked messages exist on the retrans list
- connection A-B is shut down, new connect request sent
- listen sees existing loopback B-A, creates new passive B-A
- retrans messages are sent and delivered because of 0 next_rx

The problem is that the second connection request saw the previously
existing parent connection.  Instead of using it, and using the existing
next_rx_seq state for the traffic between those IPs, it mistakenly
thought that it had to create a passive connection.

We fix this by only using passive connections in the special case where
laddr and faddr match.  In this case we'll only ever have one parent
sending connection requests and one passive connection created as the
listening path sees the existing parent connection which initiated the
request.

Original patch by Zach Brown
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

AF_RDS, PF_RDS and SOL_RDS are available in header files,
and there is no need to get their values from /proc. Document
this correctly.

Fixes: 0c5f9b88 ("RDS: Documentation")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes byte backlog accounting for the first of two chained netem instances.
Bytes backlog reported now corresponds to the number of queued packets.

When two netem instances are chained, for instance to apply rate and queue
limitation followed by packet delay, the number of backlogged bytes reported
by the first netem instance is wrong. It reports the sum of bytes in the queues
of the first and second netem. The first netem reports the correct number of
backlogged packets but not bytes. This is shown in the example below.

Consider a chain of two netem schedulers created using the following commands:

$ tc -s qdisc replace dev veth2 root handle 1:0 netem rate 10000kbit limit 100
$ tc -s qdisc add dev veth2 parent 1:0 handle 2: netem delay 50ms

Start an iperf session to send packets out on the specified interface and
monitor the backlog using tc:

$ tc -s qdisc show dev veth2

Output using unpatched netem:
	qdisc netem 1: root refcnt 2 limit 100 rate 10000Kbit
	 Sent 98422639 bytes 65434 pkt (dropped 123, overlimits 0 requeues 0)
	 backlog 172694b 73p requeues 0
	qdisc netem 2: parent 1: limit 1000 delay 50.0ms
	 Sent 98422639 bytes 65434 pkt (dropped 0, overlimits 0 requeues 0)
	 backlog 63588b 42p requeues 0

The interface used to produce this output has an MTU of 1500. The output for
backlogged bytes behind netem 1 is 172694b. This value is not correct. Consider
the total number of sent bytes and packets. By dividing the number of sent
bytes by the number of sent packets, we get an average packet size of ~=1504.
If we divide the number of backlogged bytes by packets, we get ~=2365. This is
due to the first netem incorrectly counting the 63588b which are in netem 2's
queue as being in its own queue. To verify this is the case, we subtract them
from the reported value and divide by the number of packets as follows:
	172694 - 63588 = 109106 bytes actualled backlogged in netem 1
	109106 / 73 packets ~= 1494 bytes (which matches our MTU)

The root cause is that the byte accounting is not done at the
same time with packet accounting. The solution is to update the backlog value
every time the packet queue is updated.
Signed-off-by: Joseph D Beshay <joseph.beshay@utdallas.edu>
Acked-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the kernel deleted a vti6 interface, this interface was not removed from
the tunnels list. Thus, when the ip6_vti module was removed, this old interface
was found and the kernel tried to delete it again. This was leading to a kernel
panic.

Fixes: 61220ab3 ("vti6: Enable namespace changing")
Signed-off-by: Yao Xiwei <xiwei.yao@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

https://bugzilla.kernel.org/show_bug.cgi?id=95211

Commit 70be6c91
("xfrm: Add xfrm_tunnel_skb_cb to the skb common buffer") added check
which dereferences ->outer_mode too early but larval SAs don't have
this pointer set (yet). So check for tunnel stuff later.

Mike Noordermeer reported this bug and patiently applied all the debugging.

Technically this is remote-oops-in-interrupt-context type of thing.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000034
IP: [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0
	...
[<ffffffff81500fc6>] ? xfrm4_esp_rcv+0x36/0x70
[<ffffffff814acc9a>] ? ip_local_deliver_finish+0x9a/0x200
[<ffffffff81471b83>] ? __netif_receive_skb_core+0x6f3/0x8f0
	...

RIP  [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0
Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Pull networking fixes from David Miller:

 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
    previously SACK'd, from Neal Cardwell.

 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
    from Cong WANG.

 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
    from Cong WANG.

 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.

 5) When we encapsulate for a tunnel device, skb->sk still points to the
    user socket.  So this leads to cases where we retraverse the
    ipv4/ipv6 output path with skb->sk being of some other address
    family (f.e. AF_PACKET).  This can cause things to crash since the
    ipv4 output path is dereferencing an AF_PACKET socket as if it were
    an ipv4 one.

    The short term fix for 'net' and -stable is to elide these socket
    checks once we've entered an encapsulation sequence by testing
    xmit_recursion.

    Longer term we have a better solution wherein we pass the tunnel's
    socket down through the output paths, but that is way too invasive
    for 'net' and -stable.

    From Hannes Frederic Sowa.

 6) l2tp_init() failure path forgets to unregister per-net ops, from
    Cong WANG.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
  net: dsa: fix filling routing table from OF description
  l2tp: unregister l2tp_net_ops on failure path
  mvneta: dont call mvneta_adjust_link() manually
  ipv6: protect skb->sk accesses from recursive dereference inside the stack
  netns: don't allocate an id for dead netns
  Revert "netns: don't clear nsid too early on removal"
  ip6mr: call del_timer_sync() in ip6mr_free_table()
  net: move fib_rules_unregister() under rtnl lock
  ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
  tcp: fix FRTO undo on cumulative ACK of SACKed range
  xen-netfront: transmit fully GSO-sized packets

Commit 1daa4303 ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.

Fixes: 1daa4303 ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.

However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.

This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.

To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.

This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull input fixes from Dmitry Torokhov:
 "Updates for the input subsystem - two more tweaks for ALPS driver to
  work out kinks after splitting the touchpad, trackstick, and potential
  external PS/2 mouse into separate input devices.

  Changes to support ALPS SS4 devices (protocol V8) will be coming in
  4.1..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: alps - document stick behavior for protocol V2
  Input: alps - report V2 Dualpoint Stick events via the right evdev node
  Input: alps - report interleaved bare PS/2 packets via dev3

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mvneta_adjust_link() is a callback for of_phy_connect() and should
not be called directly. The result of calling it directly is as below:
Signed-off-by: David S. Miller <davem@davemloft.net>

We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.

ipv6 does not conform with this in three places:

1) ip6_fragment: we do consult ipv6_npinfo for frag_size

2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
   loop the packet back to the local socket

3) ip6_skb_dst_mtu could query the settings from the user socket and
   force a wrong MTU

Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.

Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document that protocol V2 uses standard (bare) PS/2 mouse packets for the
DualPoint stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-By: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.

Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.

This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.

This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.

This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 4.0-rc6.  Nothing
  major, some xhci fixes for reported problems, and some usb-serial
  device ids.

  All have been in linux-next for a while"

* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
  usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
  usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
  usb: xhci: handle Config Error Change (CEC) in xhci driver
  USB: keyspan_pda: add new device id
  USB: ftdi_sio: Added custom PID for Synapse Wireless product

Pull staging driver fixes from Greg KH:
 "Here are some staging driver fixes, well, really all just IIO driver
  fixes, for 4.0-rc6.  They fix issues that have been reported with
  these drivers.

  All of these patches have been in linux-next for a while"

* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: Use iio_trigger_get for indio_dev->trig assignment
  iio: adc: vf610: use ADC clock within specification
  iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
  iio: core: Fix double free.
  iio:inv-mpu6050: Fix inconsistency for the scale channel
  staging: iio: dummy: Fix undefined symbol build error
  iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
  staging: iio: hmc5843: Set iio name property in sysfs
  iio: bmc150: change sampling frequency
  iio: fix drivers that check buffer->scan_mask

Pull tty/serial fixes from Greg KH:
 "Here are 3 serial driver fixes for 4.0-rc6.  They fix some reported
  issues with the samsung and fsl_lpuart drivers.

  All have been in linux-next for a while"

* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: clear receive flag on FIFO flush
  tty: serial: fsl_lpuart: specify transmit FIFO size
  serial: samsung: Clear operation mode on UART shutdown

Pull input subsystem fixes from Dmitry Torokhov:
 "A fix for ALPS driver for issue introduced in the latest update and a
  tweak for yet another Lenovo box in Synaptics.

  There will be more ALPS tweaks coming.."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: define INPUT_PROP_ACCELEROMETER behavior
  Input: synaptics - fix min-max quirk value for E440
  Input: synaptics - add quirk for Thinkpad E440
  Input: ALPS - fix max coordinates for v5 and v7 protocols
  Input: add MT_TOOL_PALM

Pull block layer fix from Jens Axboe:
 "Just one patch in this pull request, fixing a regression caused by a
  'mathematically correct' change to lcm()"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix blk_stack_limits() regression due to lcm() change

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization
  fix, a reboot quirk and a kgdb fixlet"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
  x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
  x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
  MAINTAINERS: Change the x86 microcode loader maintainer
  firmware: dmi_scan: Prevent dmi_num integer overflow

Pull perf fixes from Ingo Molnar:
 "Two x86 Intel PMU constraint handling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix Haswell CYCLE_ACTIVITY.* counter constraints
  perf/x86/intel: Filter branches for PEBS event

Pull devicetree fix from Grant Likely:
 "Simple bugfix for bad device tree data on the PA-Semi platform"

* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
  drivers/of: Add empty ranges quirk for PA-Semi

Pull CIFS fixes from Steve French:
 "A set of small cifs fixes fixing a memory leak, kernel oops, and
  infinite loop (and some spotted by Coverity)"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  Fix warning
  Fix another dereference before null check warning
  CIFS: session servername can't be null
  Fix warning on impossible comparison
  Fix coverity warning
  Fix dereference before null check warning
  Don't ignore errors on encrypting password in SMBTcon
  Fix warning on uninitialized buftype
  cifs: potential memory leaks when parsing mnt opts
  cifs: fix use-after-free bug in find_writable_file
  cifs: smb2_clone_range() - exit on unhandled error

First, let's explain the problem.
Suppose you have an ipip interface that stands in the netns foo and its link
part in the netns bar (so the netns bar has an nsid into the netns foo).
Now, you remove the netns bar:
 - the bar nsid into the netns foo is removed
 - the netns exit method of ipip is called, thus our ipip iface is removed:
   => a netlink message is built in the netns foo to advertise this deletion
   => this netlink message requests an nsid for bar, thus a new nsid is
      allocated for bar and never removed.

This patch adds a check in peernet2id() so that an id cannot be allocated for
a netns which is currently destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts
commit 4217291e ("netns: don't clear nsid too early on removal").

This is not the right fix, it introduces races.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to wait for the flying timers, since we
are going to free the mrtable right after it.

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have to hold rtnl lock for fib_rules_unregister()
otherwise the following race could happen:

fib_rules_unregister():	fib_nl_delrule():
...				...
...				ops = lookup_rules_ops();
list_del_rcu(&ops->list);
				list_for_each_entry(ops->rules) {
fib_rules_cleanup_ops(ops);	  ...
  list_del_rcu();		  list_del_rcu();
				}

Note, net->rules_mod_lock is actually not needed at all,
either upper layer netns code or rtnl lock guarantees
we are safe.

Cc: Alexander Duyck <alexander.h.duyck@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the IPv4 part for commit 905a6f96
(ipv6: take rtnl_lock and mark mrt6 table as freed on namespace cleanup).

Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>