Use try_cmpxchg() (instead of cmpxchg()) in a more readable way.

oval = smp_load_acquire(&sk->sk_tsq_flags);
do {
	...
} while (!try_cmpxchg(&sk->sk_tsq_flags, &oval, nval));

Reduce indentation level.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221110190239.3531280-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

try_cmpxchg() is slighly more efficient (at least on x86),
and smp_load_acquire(&sk->sk_tsq_flags) could avoid a KCSAN report.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221110174829.3403442-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No changes in generated code.
Reported-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20221110085422.521059-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
dt-bindings: net: qcom,ipa: relax some restrictions

The first patch in this series simply removes an unnecessary
requirement in the IPA binding.  Previously, if the modem was doing
GSI firmware loading, the firmware name property was required to
*not* be present.  There is no harm in having the firmware name be
specified, so this restriction isn't needed.

The second patch restates a requirement on the "memory-region"
property more accurately.

These binding changes have no impact on existing code or DTS files.
These aren't really bug fixes, so no need to back-port.
====================

Link: https://lore.kernel.org/r/20221110195619.1276302-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Either the AP or modem loads GSI firmware.  If the modem-init
property is present, the modem loads it.  Otherwise, the AP loads
it, and in that case the memory-region property must be defined.

Currently this requirement is expressed as one or the other of the
modem-init or the memory-region property being required.  But it's
harmless for the memory-region to be present if the modem is loading
firmware (it'll just be ignored).

Restate the requirement so that the memory-region property is
required only if modem-init is not present.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d8604b20 ("dt-bindings: net: qcom,ipa: add firmware-name
property") added a requirement for a "firmware-name" property that
is more restrictive than necessary.

If the AP loads GSI firmware, the name of the firmware file to use
may optionally be provided via a "firmware-name" property.  If the
*modem* loads GSI firmware, "firmware-name" doesn't need to be
supplied--but it's harmless to do so (it will simply be ignored).

Remove the unnecessary restriction, and allow "firware-name" to be
supplied even if it's not needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enabling set_policy capability for mv88e6321.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221110091027.998073-1-angelo.dureghello@timesys.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Miscellaneous refactoring and small fixes

Patches 1-3 do some refactoring to more consistently handle sock casts,
and to remove some duplicate code. No functional changes.

Patch 4 corrects a variable name in a self test, but does not change
functionality since the same value gets used due to bash's
scoping rules.

Patch 5 rewords a comment.
====================

Link: https://lore.kernel.org/r/20221110232322.125068-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We kept getting initial patches from new contributors to remove a
duplicate 'the' (since grammar checking scripts flag it), but submitters
never followed up after code review.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

'time' is the local variable of run_test() function, while 'max_time' is
the local variable of do_transfer() function. So in do_transfer(),
$max_time should be used, not $time.

Please note that here $time == $max_time so the behaviour is not changed
but the right variable is used.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use '(struct sock *)msk' to get 'sk' from 'msk' in a more direct way
instead of using '&msk->sk.icsk_inet.sk'.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The function mptcp_subflow_process_delegated() uses the input ssk first,
while __mptcp_check_push() invokes the packet scheduler first.

So this patch adds a new parameter named 'first' for the function
__mptcp_subflow_push_pending() to deal with these two cases separately.

With this change, the code that invokes the packet scheduler in the
function __mptcp_check_push() can be removed, and replaced by invoking
__mptcp_subflow_push_pending() directly.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use msk instead of mptcp_sk(sk) in the functions where the variable
"msk = mptcp_sk(sk)" has been defined.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko says:

====================
bpf-next 2022-11-11

We've added 49 non-merge commits during the last 9 day(s) which contain
a total of 68 files changed, 3592 insertions(+), 1371 deletions(-).

The main changes are:

1) Veristat tool improvements to support custom filtering, sorting, and replay
   of results, from Andrii Nakryiko.

2) BPF verifier precision tracking fixes and improvements,
   from Andrii Nakryiko.

3) Lots of new BPF documentation for various BPF maps, from Dave Tucker,
   Donald Hunter, Maryam Tahhan, Bagas Sanjaya.

4) BTF dedup improvements and libbpf's hashmap interface clean ups, from
   Eduard Zingerman.

5) Fix veth driver panic if XDP program is attached before veth_open, from
   John Fastabend.

6) BPF verifier clean ups and fixes in preparation for follow up features,
   from Kumar Kartikeya Dwivedi.

7) Add access to hwtstamp field from BPF sockops programs,
   from Martin KaFai Lau.

8) Various fixes for BPF selftests and samples, from Artem Savkov,
   Domenico Cerasuolo, Kang Minchul, Rong Tao, Yang Jihong.

9) Fix redirection to tunneling device logic, preventing skb->len == 0, from
   Stanislav Fomichev.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
  selftests/bpf: fix veristat's singular file-or-prog filter
  selftests/bpf: Test skops->skb_hwtstamp
  selftests/bpf: Fix incorrect ASSERT in the tcp_hdr_options test
  bpf: Add hwtstamp field for the sockops prog
  selftests/bpf: Fix xdp_synproxy compilation failure in 32-bit arch
  bpf, docs: Document BPF_MAP_TYPE_ARRAY
  docs/bpf: Document BPF map types QUEUE and STACK
  docs/bpf: Document BPF ARRAY_OF_MAPS and HASH_OF_MAPS
  docs/bpf: Document BPF_MAP_TYPE_CPUMAP map
  docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE map
  libbpf: Hashmap.h update to fix build issues using LLVM14
  bpf: veth driver panics when xdp prog attached before veth_open
  selftests: Fix test group SKIPPED result
  selftests/bpf: Tests for btf_dedup_resolve_fwds
  libbpf: Resolve unambigous forward declarations
  libbpf: Hashmap interface update to allow both long and void* keys/values
  samples/bpf: Fix sockex3 error: Missing BPF prog type
  selftests/bpf: Fix u32 variable compared with less than zero
  Documentation: bpf: Escape underscore in BPF type name prefix
  selftests/bpf: Use consistent build-id type for liburandom_read.so
  ...
====================

Link: https://lore.kernel.org/r/20221111233733.1088228-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
net: vlan: claim one bit from sk_buff

First patch claims skb->vlan_present.
This means some bpf changes, eg for sparc32 that I could not test.

Second patch removes one conditional test in gro_list_prepare().
====================

Link: https://lore.kernel.org/r/20221109095759.1874969-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We can remove a conditional test in gro_list_prepare()
by comparing vlan_all fields of the two skbs.

Notes:

While comparing the vlan_proto is not strictly needed,
because part of the following compare_ether_header() call,
using 32bit word is actually faster than using 16bit values.

napi_reuse_skb() makes sure to clear skb->vlan_all,
as it already calls __vlan_hwaccel_clear_tag()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

skb->vlan_present seems redundant.

We can instead derive it from this boolean expression:

vlan_present = skb->vlan_proto != 0 || skb->vlan_tci != 0

Add a new union, to access both fields in a single load/store
when possible.

	union {
		u32	vlan_all;
		struct {
		__be16	vlan_proto;
		__u16	vlan_tci;
		};
	};

This allows following patch to remove a conditional test in GRO stack.

Note:
  We move remcsum_offload to keep TC_AT_INGRESS_MASK
  and SKB_MONO_DELIVERY_TIME_MASK unchanged.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix the bug of filtering out filename too early, before we know the
program name, if using unified file-or-prog filter (i.e., -f
<any-glob>). Because we try to filter BPF object file early without
opening and parsing it, if any_glob (file-or-prog) filter is used we
have to accept any filename just to get program name, which might match
any_glob.

Fixes: 10b1b3f3 ("selftests/bpf: consolidate and improve file/prog filtering in veristat")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221111181242.2101192-1-andrii@kernel.orgSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Martin KaFai Lau says:

====================

From: Martin KaFai Lau <martin.lau@kernel.org>

The bpf-tc prog has already been able to access the
skb_hwtstamps(skb)->hwtstamp.  This set extends the same hwtstamp
access to the sockops prog.

v2:
- Fixed the btf_dump selftest which depends on the
  last member of 'struct bpf_sock_ops'.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

This patch tests reading the skops->skb_hwtstamp field.

A local test was also done such that the shinfo hwtstamp was temporary
set to a non zero value in the kernel bpf_skops_parse_hdr()
and the same value can be read by the skops test.

An adjustment is needed to the btf_dump selftest because
the changes in the 'struct bpf_sock_ops'.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221107230420.4192307-4-martin.lau@linux.dev

This patch fixes the incorrect ASSERT test in tcp_hdr_options during
the CHECK to ASSERT macro cleanup.

Fixes: 3082f8cd ("selftests/bpf: Convert tcp_hdr_options test to ASSERT_* macros")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221107230420.4192307-3-martin.lau@linux.dev

The bpf-tc prog has already been able to access the
skb_hwtstamps(skb)->hwtstamp.  This patch extends the same hwtstamp
access to the sockops prog.

In sockops, the skb is also available to the bpf prog during
the BPF_SOCK_OPS_PARSE_HDR_OPT_CB event.  There is a use case
that the hwtstamp will be useful to the sockops prog to better
measure the one-way-delay when the sender has put the tx
timestamp in the tcp header option.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221107230420.4192307-2-martin.lau@linux.dev

xdp_synproxy fails to be compiled in the 32-bit arch, log is as follows:

  xdp_synproxy.c: In function 'parse_options':
  xdp_synproxy.c:175:36: error: left shift count >= width of type [-Werror=shift-count-overflow]
    175 |                 *tcpipopts = (mss6 << 32) | (ttl << 24) | (wscale << 16) | mss4;
        |                                    ^~
  xdp_synproxy.c: In function 'syncookie_open_bpf_maps':
  xdp_synproxy.c:289:28: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
    289 |                 .map_ids = (__u64)map_ids,
        |                            ^

Fix it.

Fixes: fb5cd0ce ("selftests/bpf: Add selftests for raw syncookie helpers")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221111030836.37632-1-yangjihong1@huawei.com

Add documentation for the BPF_MAP_TYPE_ARRAY including kernel version
introduced, usage and examples. Also document BPF_MAP_TYPE_PERCPU_ARRAY
which is similar.
Co-developed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Dave Tucker <dave@dtucker.co.uk>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Maryam Tahhan <mtahhan@redhat.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/bpf/20221109174604.31673-2-donald.hunter@gmail.com

Add documentation for BPF_MAP_TYPE_QUEUE and BPF_MAP_TYPE_STACK,
including usage and examples.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221108093314.44851-1-donald.hunter@gmail.com

Add documentation for the ARRAY_OF_MAPS and HASH_OF_MAPS map types,
including usage and examples.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221108102215.47297-1-donald.hunter@gmail.com

Add documentation for BPF_MAP_TYPE_CPUMAP including
kernel version introduced, usage and examples.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Maryam Tahhan <mtahhan@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20221107165207.2682075-2-mtahhan@redhat.com

Add documentation for BPF_MAP_TYPE_LPM_TRIE including kernel
BPF helper usage, userspace usage and examples.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101114542.24481-2-donald.hunter@gmail.com

A fix for the LLVM compilation error while building bpftool.
Replaces the expression:

  _Static_assert((p) == NULL || ...)

by expression:

  _Static_assert((__builtin_constant_p((p)) ? (p) == NULL : 0) || ...)

When "p" is not a constant the former is not considered to be a
constant expression by LLVM 14.

The error was introduced in the following patch-set: [1].
The error was reported here: [2].

  [1] https://lore.kernel.org/bpf/20221109142611.879983-1-eddyz87@gmail.com/
  [2] https://lore.kernel.org/all/202211110355.BcGcbZxP-lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Fixes: c302378b ("libbpf: Hashmap interface update to allow both long and void* keys/values")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20221110223240.1350810-1-eddyz87@gmail.com

Jacob Keller says:

====================
ptp: convert remaining users of .adjfreq

A handful of drivers remain which still use the .adjfreq interface instead
of the newer .adjfine interface. The new interface is preferred as it has a
more precise adjustment using scaled parts per million.

A handful of the remaining drivers are implemented with a common pattern
that can be refactored to use the adjust_by_scaled_ppm and
diff_by_scaled_ppm helper functions. These include the ptp_phc, ptp_ixp64x,
tg3, hclge, stmac, cpts and bnxt drivers. These are each refactored in a
separate change.

The remaining drivers, bnx2x, liquidio, cxgb4, fec, and qede implement
.adjfreq in a way different from the normal pattern expected by
adjust_by_scaled_ppm. Fixing these drivers to properly use .adjfine requires
specific knowledge of the hardware implementation. Instead I simply refactor
them to use .adjfine and convert scaled_ppm into ppb using the
scaled_ppm_to_ppb function.

Finally, the .adjfreq implementation interface is removed entirely. This
simplifies the interface and ensures that new drivers must implement the new
interface as they no longer have an alternative.

This still leaves parts per billion used as part of the max_adj interface,
and the core PTP stack still converts scaled_ppm to ppb to check this. I
plan to investigate fixing this in the future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that all drivers have been converted to .adjfine, we can remove the
.adjfreq from the interface structure.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all remaining drivers that still use .adjfreq to the newer .adjfine
implementation. These drivers are not straightforward, as they use
non-standard methods of programming their hardware. They are all converted
to use scaled_ppm_to_ppb to get the parts per billion value that their
logic depends on.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Derek Chickles <dchickles@marvell.com>
Cc: Satanand Burla <sburla@marvell.com>
Cc: Felix Manlunas <fmanlunas@marvell.com>
Cc: Raju Rangoju <rajur@chelsio.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the BNXT_FW_CAP_PTP_RTC flag is not set, the bnxt driver implements
.adjfreq on a cyclecounter in terms of the straightforward "base * ppb / 1
billion" calculation. When BNXT_FW_CAP_PTP_RTC is set, the driver forwards
the ppb value to firmware for configuration.

Convert the driver to the newer .adjfine interface, updating the
cyclecounter calculation to use adjust_by_scaled_ppm to perform the
calculation. Use scaled_ppm_to_ppb when forwarding the correction to
firmware.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cpts implementation of .adjfreq is implemented in terms of a
straight forward "base * ppb / 1 billion" calculation.

Convert this to the newer .adjfine, using the recently added
adjust_by_scaled_ppm helper function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The stmac implementation of .adjfreq is implemented in terms of a
straight forward "base * ppb / 1 billion" calculation.

Convert this to the newer .adjfine, using the recently added
adjust_by_scaled_ppm helper function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hclge implementation of .adjfreq is implemented in terms of a
straight forward "base * ppb / 1 billion" calculation.

Convert this to the newer .adjfine, using the recently added
adjust_by_scaled_ppm helper function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tg3 implementation of .adjfreq is implemented in terms of a
straight forward "base * ppb / 1 billion" calculation.

Convert this to the newer .adjfine, using the recently added
diff_by_scaled_ppm helper function to calculate the difference and
direction of the adjustment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Siva Reddy Kallam <siva.kallam@broadcom.com>
Cc: Prashant Sreedharan <prashant@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ptp_ixp46x implementation of .adjfreq is implemented in terms of a
straight forward "base * ppb / 1 billion" calculation.

Convert this to the newer .adjfine, using the recently added
adjust_by_scaled_ppm helper function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ptp_phc implementation of .adjfreq is implemented in terms of a
straight forward "base * ppb / 1 billion" calculation.

Convert this to the newer .adjfine, updating the driver to use the recently
introduced adjust_by_scaled_ppm helper function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Oleksandr Mazur says:

====================
net: marvell: prestera: pci: add support for AC5X family devices

This patch series introduces a support for AC5X family devices.
AC5X devices utilize arm64 CPUs, and thus require a new FW (arm64-one)
to be loaded. The new FW-image for AC5X devices has been introduces in
the linux-firmware repo under the following commit:

60310c2deb8c ("Merge branch 'prestera-v4.1' of
https://github.com/PLVision/linux-firmware")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>