Pull ARM dma-mapping fix from Marek Szyprowski:
 "This patch fixes a potential memory leak in the ARM dma-mapping code."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()

Pull GPIO fix from Linus Walleij:
 "A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver
  where a callback ignores one of its arguments.  It needs to go into
  stable too so sending this upstream immediately."

* tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio-lpc32xx: Fix value handling of gpio_direction_output()

Pull two md bugfixes from NeilBrown:
 "One (missing spinlock init) was only introduced recently.  The other
  has been present as long as raid10 has been supported, so is tagged
  for -stable."

* tag 'md-3.6-fixes' of git://neil.brown.name/md:
  md/raid10: fix "enough" function for detecting if array is failed.
  md/raid5: add missing spin_lock_init.

Pull EDAC fixes from Mauro Carvalho Chehab:
 "Three edac fixes at the memory enumeration logic:
        - i3200_edac: Fixes a regression at the memory rank size, when the
                memorias are dual-rank;
        - i5000_edac: Fix a longstanding bug when calculating the memory
                size: before Kernel 3.6, the memory size were right only
                with one specific configuration;
        - sb_edac: Fixes a bug since the initial release of the driver:
                with 16GB DIMMs, there's an overflow at the memory size,
                causing the number of pages per dimm (an unsigned value)
                to have the highest bit equal to 1, effectively mangling
                the memory size.

  The third bug can potentially affect the error decoding logic as well."

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: Avoid overflow errors at memory size calculation
  i5000: Fix the memory size calculation with 2R memories
  i3200_edac: Fix memory rank size

"Search list for X" sounds like you're trying to find X on a list.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The 'enough' function is written to work with 'near' arrays only
in that is implicitly assumes that the offset from one 'group' of
devices to the next is the same as the number of copies.
In reality it is the number of 'near' copies.

So change it to make this number explicit.

This bug makes it possible to run arrays without enough drives
present, which is dangerous.
It is appropriate for an -stable kernel, but will almost certainly
need to be modified for some of them.

Cc: stable@vger.kernel.org
Reported-by: Jakub Husák <jakub@gooseman.cz>
Signed-off-by: NeilBrown <neilb@suse.de>

Pull c6x arch fixes from Mark Salter:
  - Add __NR_kcmp to generic syscall list
  - C6X: Use generic asm/barrier.h

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  syscalls: add __NR_kcmp syscall to generic unistd.h
  c6x: use asm-generic/barrier.h

Cc: Lukasz Dorau <lukasz.dorau@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit d97b46a6 ("syscalls, x86: add __NR_kcmp syscall" ) added a new
syscall to support checkpoint restore. It is currently x86-only, but
that restriction will be removed in a subsequent patch. Unfortunately,
the kernel checksyscalls script had a bug which suppressed any warning
to other architectures that the kcmp syscall was not implemented. A
patch to checksyscalls is being tested in linux-next and other
architectures are seeing warnings about kcmp being unimplemented.

This patch adds __NR_kcmp to <asm-generic/unistd.h> so that kcmp is
wired in for architectures using the generic syscall list.
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Pull more networking fixes from David Miller:

 1) Eric Dumazet discovered and fixed what turned out to be a family of
    bugs.  These functions were using pskb_may_pull() which might need
    to reallocate the linear SKB data buffer, but the callers were not
    expecting this possibility.  The callers have cached pointers to the
    packet header areas, and would need to reload them if we were to
    continue using pskb_may_pull().

    So they could end up reading garbage.

    It's easier to just change these RAW4/RAW6/MIP6 routines to use
    skb_header_pointer() instead of pskb_may_pull(), which won't modify
    the linear SKB data area.

 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can
    call down into the TCP keepalive code.  The case basically involves
    creating a raw socket with sk_protocol == IPPROTO_TCP, then calling
    setsockopt(sock_fd, SO_KEEPALIVE, ...)

    Fixed by Eric Dumazet.

 3) Bluetooth devices do not get configured properly while being powered
    on, resulting in always using legacy pairing instead of SSP.  Fix
    from Andrzej Kaczmarek.

 4) Bluetooth cancels delayed work erroneously, put stricter checks in
    place.  From Andrei Emeltchenko.

 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in
    cfg80211, from Luis R.  Rodriguez.

 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach.

 7) Missing module license in bcm87xx driver, from Peter Huewe.

 8) Team driver can lose port changed events when adding devices to a
    team, fix from Jiri Pirko.

 9) Fix endless loop when trying ot unregister PPPOE device in zombie
    state, from Xiaodong Xu.

10) batman-adv layer needs to set MAC address of software device
    earlier, otherwise we call tt_local_add with it uninitialized.

11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but
    that doesn't program the device properly.  From Marek Vasut.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv6: mip6: fix mip6_mh_filter()
  ipv6: raw: fix icmpv6_filter()
  net: guard tcp_set_keepalive() to tcp sockets
  phy/micrel: Add missing header to micrel_phy.h
  phy/micrel: Rename KS80xx to KSZ80xx
  phy/micrel: Implement support for KSZ8021
  batman-adv: Fix symmetry check / route flapping in multi interface setups
  batman-adv: Fix change mac address of soft iface.
  pppoe: drop PPPOX_ZOMBIEs in pppoe_release
  team: send port changed when added
  ipv4: raw: fix icmp_filter()
  net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver
  iwlwifi: don't double free the interrupt in failure path
  cfg80211: fix possible circular lock on reg_regdb_search()
  Bluetooth: Fix not removing power_off delayed work
  Bluetooth: Fix freeing uninitialized delayed works
  Bluetooth: mgmt: Fix enabling LE while powered off
  Bluetooth: mgmt: Fix enabling SSP while powered off

mip6_mh_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Included fixes:
- fix the behaviour of batman-adv in case of virtual interface MAC change event
- fix symmetric link check in neighbour selection
Signed-off-by: David S. Miller <davem@davemloft.net>

icmpv6_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.

Use skb_header_pointer() instead of pskb_may_pull() and
change the prototype to make clear both sk and skb are const.

Also, if icmpv6 header cannot be found, do not deliver the packet,
as we do in IPv4.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SuperH fix from Paul Mundt:
 "One last minute regression fix.."

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: pfc: Fix up GPIO mux type reconfig case.

Merge misc fixes from Andrew Morton:
 "One maintainer change and three bugfixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (4 commits)
  c/r: prctl: fix build error for no-MMU case
  lib/flex_proportions.c: fix corruption of denominator in flexible proportions
  checksyscalls: fix "here document" handling
  pwm-backlight: take over maintenance

Commit 1ad75b9e ("c/r: prctl: add minimal address test to
PR_SET_MM") added some address checking to prctl_set_mm() used by
checkpoint-restore.  This causes a build error for no-MMU systems:

   kernel/sys.c: In function 'prctl_set_mm':
   kernel/sys.c:1868:34: error: 'mmap_min_addr' undeclared (first use in this function)

The test for mmap_min_addr doesn't make a lot of sense for no-MMU code
as noted in commit 6e141546 ("NOMMU: Optimise away the
{dac_,}mmap_min_addr tests").

This patch defines mmap_min_addr as 0UL in the no-MMU case so that the
compiler will optimize away tests for "addr < mmap_min_addr".
Signed-off-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: <stable@vger.kernel.org>	[3.6.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When racing with CPU hotplug, percpu_counter_sum() can return negative
values for the number of observed events.

This confuses fprop_new_period(), which uses unsigned type and as a
result number of events is set to big *positive* number.  From that
moment on, things go pear shaped and can result e.g.  in division by
zero as denominator is later truncated to 32-bits.

This bug causes a divide-by-zero oops in bdi_dirty_limit() in Borislav's
3.6.0-rc6 based kernel.

Fix the issue by using a signed type in fprop_new_period().  That makes
us bail out from the function without doing anything (mistakenly)
thinking there are no events to age.  That makes aging somewhat
inaccurate but getting accurate data would be rather hard.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Borislav Petkov <bp@amd64.org>
Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"echo" doesn't read from stdin, therefore the checksyscalls script didn't
warn about not implemented system calls anymore since 29dc54c6
("checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source").

Use "cat" instead of "echo" which handles this correctly.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since the pwm-backlight driver is lacking a proper maintainer and is the
heaviest user of the PWM framework I'm taking over maintenance.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Arun Murthy <arun.murthy@stericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Robert Morell <rmorell@nvidia.com>
Cc: Dilan Lee <dilee@nvidia.com>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.

The net result is that memories are improperly reported there, when
high-density DIMMs are used:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.

After the patch, the memory size (16 GB) is properly detected:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

When 2R memories are found, the memory size should be multiplied
by two, otherwise, it will report half of the memory size:

       +-----------------------------------------------+
       |                      mc0                      |
       |        branch0        |        branch1        |
       | channel0  | channel1  | channel0  | channel1  |
-------+-----------------------------------------------+
slot3: |     0 MB  |     0 MB  |     0 MB  |     0 MB  |
slot2: |     0 MB  |     0 MB  |     0 MB  |     0 MB  |
-------+-----------------------------------------------+
slot1: |     0 MB  |     0 MB  |     0 MB  |     0 MB  |
slot0: |  1024 MB  |  1024 MB  |  1024 MB  |  1024 MB  |
-------+-----------------------------------------------+

(the above machine have 4 x 2GB 2R memories)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

commit a895bf8b incorrectly
changed the logic that fills the memory bank size. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Some drivers need to switch pin states between GPIO and pin function at
runtime, which was inadvertently broken in the pinctrl driver for GPIOs
being bound to a specific direction.

This fixes up the request path to ensure that previously configured GPIOs
don't cause us to inadvertently error out with an unsupported mux on
reconfig, which in practice is primarily aimed at trapping pull-up/down
users that have yet to be implemented under the new API.

Fixes up regressions in the TPU PWM driver, amongst others.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

John W. Linville says:

====================
Please pull this last(?) batch of fixes intended for 3.6...

For the Bluetooth bits, Gustavo says this:

"Here goes probably my last update to 3.6. It includes the two patches
you were ok last week(from Andrzej Kaczmarek), those are critical
ones, and two other fixes one for a system crash and the other for
a missing lockdep annotation."

The referenced fixes from Andrzej prevent attempts to configure devices
that are powered-off.

Along with the Bluetooth fixes, there are a couple of 802.11 fixes.
Emmanuel Grumbach gives us an iwlwifi fix to prevent releasing an
interrupt twice.  Luis R. Rodriguez provides a fix for a possible
circular lock dependency in the cfg80211 regulatory enforcement code.

All of these have been in linux-next for a few days.  I hope they are
not too late to make the 3.6 release!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull tile gxio ABI fix from Chris Metcalf:
 "This fixes a last-minute change in the Tilera hypervisor ABI for TRIO
  (PCI root complex) support.  We've locked in this ABI going forward
  and will make sure no further ABI changes like this occur."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: gxio iorpc numbering change for TRIO interface

Pull vfio fixes from Alex Williamson:
 "VFIO doc update and virqfd race fix"

* tag 'vfio-for-linus' of git://github.com/awilliam/linux-vfio:
  vfio: Fix virqfd release race
  vfio: Trivial Documentation correction

Merge tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull a Xen fix from Konrad Rzeszutek Wilk:
 "It is a bug-fix when we run the initial PV guest on a AMD K8 machine
  and have CONFIG_AMD_NUMA enabled and detect the NUMA topology from the
  Northbridge.

  We end up in the situation where the initial domain gets too much
  information and gets confused and crashes - the fix is to restrict the
  domain to get the information - and we do it by just disabling NUMA on
  the PV guest (the hypervisor is still able to do its proper NUMA
  allocations of guests).

  It is OK to disable the PV guest from accessing NUMA data as right now
  we do not inject any NUMA node information to the PV guests.  When we
  do get to that point, then this patch will have to be reverted."

 * Disable PV NUMA support as we do not do anything with it (yet) and it
   can cause bootup crashes on certain AMD machines.

* tag 'stable/for-linus-3.6-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/boot: Disable NUMA for PV guests.

Pull two ceph fixes from Sage Weil:
 "The first fixes a leak in the rbd setup error path, and the second
  fixes a more serious problem with mismatched kmap/kunmap that surfaced
  after the recent refactoring work."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: only kunmap kmapped pages
  rbd: drop dev reference on error in rbd_open()

Its possible to use RAW sockets to get a crash in
tcp_set_keepalive() / sk_reset_timer()

Fix is to make sure socket is a SOCK_STREAM one.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For GPIOs of gpio-lpc32xx, gpio_direction_output() ignores the value argument
(initial value of output). This patch fixes this by setting the level
accordingly.

Cc: stable@kernel.org
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The license header was missing in micrel_phy.h . This patch adds
one.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no such part as KS8001, KS8041 or KS8051. There are only
KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match
the Micrel naming.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The KSZ8021 PHY was previously caught by KS8051, which is not correct.
This PHY needs additional setup if it is strapped for address 0. In such
case an reserved bit must be written in the 0x16, "Operation Mode Strap
Override" register. According to the KS8051 datasheet, that bit means
"PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021.
The issue where the ethernet controller (Freescale FEC) did not communicate
with network is fixed by writing this bit as 1.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David J. Choi <david.choi@micrel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An ABI numbering change was made in the hypervisor for Tilera's 4.1
MDE release (just shipped).  It's incompatible with the previous 4.0
release ABI numbering, so we track the new numbering going forward.
We plan to avoid modifying ABI numbering for these interfaces again.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

A recent patch in the linux-next tree caused a build failure on
C6X because C6X didn't define a read_barrier_depends() macro. C6X
does not support SMP and the architecture doesn't provide any
special memory ordering instructions, so it makes sense to just
use the generic barrier.h rather than patching the existing c6x
specific header.
Signed-off-by: Mark Salter <msalter@redhat.com>

The hypervisor is in charge of allocating the proper "NUMA" memory
and dealing with the CPU scheduler to keep them bound to the proper
NUMA node. The PV guests (and PVHVM) have no inkling of where they
run and do not need to know that right now. In the future we will
need to inject NUMA configuration data (if a guest spans two or more
NUMA nodes) so that the kernel can make the right choices. But those
patches are not yet present.

In the meantime, disable the NUMA capability in the PV guest, which
also fixes a bootup issue. Andre says:

"we see Dom0 crashes due to the kernel detecting the NUMA topology not
by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA).

This will detect the actual NUMA config of the physical machine, but
will crash about the mismatch with Dom0's virtual memory. Variation of
the theme: Dom0 sees what it's not supposed to see.

This happens with the said config option enabled and on a machine where
this scanning is still enabled (K8 and Fam10h, not Bulldozer class)

We have this dump then:
NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10
Scanning NUMA topology in Northbridge 24
Number of physical nodes 4
Node 0 MemBase 0000000000000000 Limit 0000000040000000
Node 1 MemBase 0000000040000000 Limit 0000000138000000
Node 2 MemBase 0000000138000000 Limit 00000001f8000000
Node 3 MemBase 00000001f8000000 Limit 0000000238000000
Initmem setup node 0 0000000000000000-0000000040000000
  NODE_DATA [000000003ffd9000 - 000000003fffffff]
Initmem setup node 1 0000000040000000-0000000138000000
  NODE_DATA [0000000137fd9000 - 0000000137ffffff]
Initmem setup node 2 0000000138000000-00000001f8000000
  NODE_DATA [00000001f095e000 - 00000001f0984fff]
Initmem setup node 3 00000001f8000000-0000000238000000
Cannot find 159744 bytes in node 3
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar
RIP: e030:[<ffffffff81d220e6>]  [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
.. snip..
  [<ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178
  [<ffffffff81d23348>] sparse_init+0xe4/0x25a
  [<ffffffff81d16840>] paging_init+0x13/0x22
  [<ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b
  [<ffffffff81683954>] ? printk+0x3c/0x3e
  [<ffffffff81d01a38>] start_kernel+0xe5/0x468
  [<ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1
  [<ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36
  [<ffffffff81d050ee>] xen_start_kernel+0x565/0x56c
"

so we just disable NUMA scanning by setting numa_off=1.

CC: stable@vger.kernel.org
Reported-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Acked-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When either of __alloc_from_contiguous or __alloc_remap_buffer fails
to provide a valid pointer, allocated memory is freed up and an error
is returned. 'pages' was however not freed before returning error.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

commit b17459c0
   raid5: add a per-stripe lock

added a spin_lock to the 'stripe_head' struct.
Unfortunately there are two places where this struct is allocated
but the spin lock was only initialised in one of them.

So add the missing spin_lock_init.
Signed-off-by: NeilBrown <neilb@suse.de>

Pull kbuild fixes from Michal Marek:
 "There are two more kbuild fixes for 3.6.

  One fixes a race between x86's archscripts target and the rule
  (re)building scripts/basic/fixdep.  The second is a fix for the
  previous attempt at fixing make firmware_install with make 3.82.
  This new solution should work with any version of GNU make"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  x86/kbuild: archscripts depends on scripts_basic
  firmware: fix directory creation rule matching with make 3.80