- 23 Apr, 2014 30 commits
-
-
Nicolas Dichtel authored
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Haiyang Zhang authored
The union contains only one member now, so we use the variables in it directly. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
Removed recv_pkt_list and lock, and updated related code, so that the locking overhead is reduced especially when multiple channels are in use. The recv_pkt_list isn't actually necessary because the packets are processed sequentially in each channel. It has been replaced by a local variable, and the related lock for this list is also removed. The is_data_pkt field is not used in receive path, so its assignment is cleaned up. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e and i40evf. Greg provides two patches for i40e, the first adds the netdev ops to support the addition of static FDB entries in the physical function (PF) MAC/VLAN filter table so that the virtual functions (VFs) can communicate with bridged virtual Ethernet ports such as those provided by the virtio driver. The second is to fix an issue where the assignment of a port VLAN after it is already up and running requires the VF driver to be reloaded, so print a message warning the host administrator about the need to reload the VF driver. In addition, knock the VF offline so that it does not continue to receive traffic not on the port VLAN assigned to it. Jesse provides a patch for i40e and i40evf to unhide and enable the PREFENA field in the receive host memory cache (RX-HMC) for best performance. Mitch provides a i40e patch to implement the net device op for Tx bandwidth setting. Catherine removes a firmware workaround that is no longer needed with the latest firmware for i40e. She also provides some minor cleanups as well bumps the driver versions. Anjali provides a fix for i40e displaying IPv4 flow director filters which needed additional information to be communicated up above in order for it to be displayed correctly. Shannon adds tracking of the NVM busy state so that the driver won't allow a new NVM update command until a completion event is received from the current update. Updates the admin queue API to reflect recent changes in the firmware. Also rearranges the "if netdev" logic to prepare for handling non-netdev VSIs. Lastly rework the fdir setup and tear down to use the newly created i40e_vsi_open() and i40e_vsi_close(), which also fixes a memory leak of the FDIR queue buffer info structs across a reset. ==================== Signed-off-by: -
David S. Miller authored
Richard Guy Briggs says: ==================== audit: implement multicast socket for journald This is a patch set Eric Paris and I have been working on to add a restricted capability read-only netlink multicast socket to kernel audit to enable userspace clients such as systemd/journald to receive audit logs, in addition to the bidirectional auditd userspace client. Currently, auditd has the CAP_AUDIT_CONTROL and CAP_AUDIT_WRITE capabilities (but uses CAP_NET_ADMIN). The CAP_AUDIT_READ capability will be added for use by read-only AUDIT_NLGRP_READLOG multicast group clients to the kaudit subsystem. This will remove the dependence on CAP_NET_ADMIN for the multicast read-only socket. Patches 1-3 provide a way for per-protocol bind functions to signal an error and to be able to clean up after themselves. The first netfilter cleanup patch has already been accepted by a netfilter maintainer, though I don't see it upstream yet, so it is included for completeness. The second patch adds the per-protocol bind function return code to signal to the netlink code that no further processing should be done and to undo the work already done. V1: This rev fixes a bug introduced by flattening the code in the last posting. *V2: This rev moves the per-protocol bind call above the socket exposure call and refactors out the unbind procedure. The third provides a way per protocol to undo bind actions on DROP. Patches 4-6 implement the audit multicast socket with capability checking. The fourth patch adds the bind function capability check to multicast join requests for audit. The fifth patch adds the audit log read multicast group. An assumption has been made that systemd/journald reside in the initial network namespace. This could be changed to check the actual network namespace of systemd/journald should this assumption no longer be true since audit now supports all network namespaces. This version of the patch now directly sends the broadcast when the packet is ready rather than waiting until it passes the queue. The sixth checks if any clients actually exist before sending. Since the net tree is busier than the audit tree, conflicts are more likely and the audit patches depend on the net patches, it is proposed to have the net tree carry this entire patchset for 3.16. Are the net maintainers ok with this? https://bugzilla.redhat.com/show_bug.cgi?id=887992 First posted: https://www.redhat.com/archives/linux-audit/2013-January/msg00008.html https://lkml.org/lkml/2013/1/27/279 Please find source for a test program at: http://people.redhat.com/rbriggs/audit-multicast-listen/ ==================== Signed-off-by:
-
Richard Guy Briggs authored
Test first to see if there are any userspace multicast listeners bound to the socket before starting the multicast send work. Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Richard Guy Briggs authored
Add a netlink multicast socket with one group to kaudit for "best-effort" delivery to read-only userspace clients such as systemd, in addition to the existing bidirectional unicast auditd userspace client. Currently, auditd is intended to use the CAP_AUDIT_CONTROL and CAP_AUDIT_WRITE capabilities, but actually uses CAP_NET_ADMIN. The CAP_AUDIT_READ capability is added for use by read-only AUDIT_NLGRP_READLOG netlink multicast group clients to the kaudit subsystem. This will safely give access to services such as systemd to consume audit logs while ensuring write access remains restricted for integrity. Signed-off-by:
-
Richard Guy Briggs authored
Register a netlink per-protocol bind fuction for audit to check userspace process capabilities before allowing a multicast group connection. Signed-off-by:
-
Richard Guy Briggs authored
Call the per-protocol unbind function rather than bind function on NETLINK_DROP_MEMBERSHIP in netlink_setsockopt(). Signed-off-by:
-
Richard Guy Briggs authored
Have the netlink per-protocol optional bind function return an int error code rather than void to signal a failure. This will enable netlink protocols to perform extra checks including capabilities and permissions verifications when updating memberships in multicast groups. In netlink_bind() and netlink_setsockopt() the call to the per-protocol bind function was moved above the multicast group update to prevent any access to the multicast socket groups before checking with the per-protocol bind function. This will enable the per-protocol bind function to be used to check permissions which could be denied before making them available, and to avoid the messy job of undoing the addition should the per-protocol bind function fail. The netfilter subsystem seems to be the only one currently using the per-protocol bind function. Signed-off-by:
-
Richard Guy Briggs authored
Remove duplicity and simplify code flow by moving the rcu_read_unlock() above the condition and let the flow control exit naturally at the end of the function. Signed-off-by:
-
Chema Gonzalez authored
Added a new ancillary load (bpf call in eBPF parlance) that produces a 32-bit random number. We are implementing it as an ancillary load (instead of an ISA opcode) because (a) it is simpler, (b) allows easy JITing, and (c) seems more in line with generic ISAs that do not have "get a random number" as a instruction, but as an OS call. The main use for this ancillary load is to perform random packet sampling. Signed-off-by:
Chema Gonzalez <chema@google.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Li RongQing authored
if allocating memory for vlan_pcpu_stats failed, the device can not be operated Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Venkata Duvvuru authored
This be2net patch implements the get/set_rxfh() ethtool hooks. RSS_CONFIG device command is invoked to set hashkey and indirection table. It also uses an initial random value for RSS hash key instead of a hard-coded value as hard-coded values for a hash-key are usually considered a security risk. Signed-off-by:
Venkat Duvvuru <VenkatKumar.Duvvuru@Emulex.com> Signed-off-by:
-
Venkata Duvvuru authored
This ethtool patch primarily copies the ioctl command data structures from/to the User space and invokes the driver hook. Signed-off-by:
-
Ying Xue authored
Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Eric Dumazet authored
In commit 0e280af0 ("tcp: introduce TCPSpuriousRtxHostQueues SNMP counter") we added a logic to detect when a packet was retransmitted while the prior clone was still in a qdisc or driver queue. We are now confident we can do better, and catch the problem before we fragment a TSO packet before retransmit, or in TLP path. This patch fully exploits the logic by simply canceling the spurious retransmit. Original packet is in a queue and will eventually leave the host. This helps to avoid network collapses when some events make the RTO estimations very wrong, particularly when dealing with huge number of sockets with synchronized blast. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Heiner Kallweit authored
Userspace applications can use IFA_F_MANAGETEMPADDR with RTM_NEWADDR already to indicate that the kernel should take care of temporary address management. This patch adds related functionality to RTM_DELADDR. By setting IFA_F_MANAGETEMPADDR a userspace application can indicate that the kernel should delete all related temporary addresses as well. A corresponding patch for the "ip addr del" command has been applied to iproute2 already. Signed-off-by:
Heiner Kallweit <heiner.kallweit@web.de> Reviewed-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David S. Miller authored
Ying Xue says: ==================== purge tipc_net_lock Now tipc routing hierarchy comprises the structures 'node', 'link'and 'bearer'. The whole hierarchy is protected by a big read/write lock, tipc_net_lock, to ensure that nothing is added or removed while code is accessing any of these structures. Obviously the locking policy makes node, link and bearer components closely bound together so that their relationship becomes unnecessarily complex. In the worst case, such locking policy not only has a negative influence on performance, but also it's prone to lead to deadlock occasionally. In order o decouple the complex relationship between bearer and node as well as link, the locking policy is adjusted as follows: - Bearer level RTNL lock is used on update side, and RCU is used on read side. Meanwhile, all bearer instances including broadcast bearer are saved into bearer_list array. - Node and link level All node instances are saved into two tipc_node_list and node_htable lists. The two lists are protected by node_list_lock on write side, and they are guarded with RCU lock on read side. All members in node structure including link instances are protected by node spin lock. - The relationship between bearer and node When link accesses bearer, it first needs to find the bearer with its bearer identity from the bearer_list array. When bearer accesses node, it can iterate the node_htable hash list with the node address to find the corresponding node. In the new locking policy, every component has its private locking solution and the relationship between bearer and node is very simple, that is, they can find each other with node address or bearer identity from node_htable hash list or bearer_list array. ==================== Signed-off-by: -
Ying Xue authored
Commit a21a584d (tipc: fix neighbor detection problem after hw address change) introduces a race condition involving tipc_disc_delete() and tipc_disc_add/remove_dest that can cause TIPC to dereference the pointer to the bearer discovery request structure after it has been freed since a stray pointer is left in the bearer structure. In order to fix the issue, the process of resetting the discovery request handler is optimized: the discovery request handler and request buffer are just reset instead of being freed, allocated and initialized. As the request point is always valid and the request's lock is taken while the request handler is reset, the race doesn't happen any more. Reported-by:
Erik Hugne <erik.hugne@ericsson.com> Signed-off-by:
-
Ying Xue authored
The node map variable - 'nodes' in bearer structure is only used by bclink. When bclink accesses it, bc_lock is held. But when change it, for instance, in tipc_bearer_add_dest() or tipc_bearer_remove_dest() the bc_lock is not taken at all. To avoid any inconsistent data, we should always grab bc_lock while accessing node map variable. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Reviewed-by:
-
Ying Xue authored
As bearer pointer is known in tipc_l2_device_event(), it's unnecessary to search it again in tipc_disable_bearer(). If tipc_disable_bearer() is replaced with bearer_disable() in tipc_l2_device_event(), this will help us save a bit time when bearer is disabled. Signed-off-by:
-
Ying Xue authored
The 'media_ptr' pointer in bearer structure which points to network device, is protected by RCU. So, before netdevice is released, synchronize_net() should be involved to prevent no any user of the netdevice on read side from accessing it after it is freed. Signed-off-by:
-
Ying Xue authored
Now tipc routing hierarchy comprises the structures 'node', 'link'and 'bearer'. The whole hierarchy is protected by a big read/write lock, tipc_net_lock, to ensure that nothing is added or removed while code is accessing any of these structures. Obviously the locking policy makes node, link and bearer components closely bound together so that their relationship becomes unnecessarily complex. In the worst case, such locking policy not only has a negative influence on performance, but also it's prone to lead to deadlock occasionally. In order o decouple the complex relationship between bearer and node as well as link, the locking policy is adjusted as follows: - Bearer level RTNL lock is used on update side, and RCU is used on read side. Meanwhile, all bearer instances including broadcast bearer are saved into bearer_list array. - Node and link level All node instances are saved into two tipc_node_list and node_htable lists. The two lists are protected by node_list_lock on write side, and they are guarded with RCU lock on read side. All members in node structure including link instances are protected by node spin lock. - The relationship between bearer and node When link accesses bearer, it first needs to find the bearer with its bearer identity from the bearer_list array. When bearer accesses node, it can iterate the node_htable hash list with the node address to find the corresponding node. In the new locking policy, every component has its private locking solution and the relationship between bearer and node is very simple, that is, they can find each other with node address or bearer identity from node_htable hash list or bearer_list array. Until now above all changes have been done, so tipc_net_lock can be removed safely. Signed-off-by:
-
Ying Xue authored
Now the media_ptr pointer is protected with tipc_net_lock write lock on write side; tipc_net_lock read lock is used to read side. As the part of effort of eliminating tipc_net_lock, we decide to adjust the locking policy of media_ptr pointer protection: on write side, RTNL lock is use while on read side RCU read lock is applied. Signed-off-by:
-
Ying Xue authored
Currently on both paths of message transmission and reception, the read lock of tipc_net_lock must be held before bearer is accessed, while the write lock of tipc_net_lock has to be taken before bearer is configured. Although it can ensure that bearer is always valid on the two data paths, link and bearer is closely bound together. So as the part of effort of removing tipc_net_lock, the locking policy of bearer protection will be adjusted as below: on the two data paths, RCU is used, and on the configuration path of bearer, RTNL lock is applied. Now RCU just covers the path of message reception. To make it possible to protect the path of message transmission with RCU, link should not use its stored bearer pointer to access bearer, but it should use the bearer identity of its attached bearer as index to get bearer instance from bearer_list array, which can help us decouple the relationship between bearer and link. As a result, bearer on the path of message transmission can be safely protected by RCU when we access bearer_list array within RCU lock protection. Signed-off-by:
-
Ying Xue authored
Convert bearer_list to RCU list. It's protected by RTNL lock on update side, and RCU read lock is applied to read side. Signed-off-by:
-
Ying Xue authored
As the tipc network initialization(ie, tipc_net_start routine) is under RTNL protection, its corresponding deinitialization part(ie, tipc_net_stop routine) should be protected by RTNL too. Signed-off-by:
-
Ying Xue authored
Currently the 'tipc_ptr' pointer is protected by tipc_net_lock write lock on write side, and RCU read lock is applied to read side. In addition, there have two paths on write side where we may change variables pointed by the 'tipc_ptr' pointer: one is to configure bearer by tipc-config tool and another one is that bearer status is changed by notification events of its attached interface. But on the latter path, we improperly deem that accessing 'tipc_ptr' pointer happens on read side with rcu_read_lock() although some variables pointed by the 'tipc_ptr' pointer are changed possibly. Moreover, as now the both paths are guarded by RTNL lock, it's better to adjust the locking policy of 'tipc_ptr' pointer protection, allowing RTNL instead of tipc_net_lock write lock to protect it on write side, which will help us purge tipc_net_lock in the future. Signed-off-by:
-
Ying Xue authored
There have two paths where we can configure or change bearer status: one is that bearer is configured from user space with tipc-config tool; another one is that bearer is changed by notification events from its attached interface. On the first path, one dedicated config_mutex lock is guarded; on the latter path, RTNL lock has been placed to serialize the process of dealing with interface events. So, if RTNL lock is also used to protect the first path, this will not only extremely help us simplify current locking policy, but also config_mutex lock can be deleted as well. Signed-off-by:
-
- 22 Apr, 2014 10 commits
-
-
Catherine Sullivan authored
Bump i40e to version 0.3.43 and i40evf to version 0.9.21. Change-ID: Ice4c715731bfa1dfc12dd45418675a3ba6e08d57 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Catherine Sullivan authored
Tweak a for-loop to make it easier to add conditional stats in the future. Signed-off-by:
-
Catherine Sullivan authored
Simplify some if/else statements in i40e_main.c Signed-off-by:
-
Shannon Nelson authored
Use the newer i40e_vsi_open() and i40e_vsi_close() in the FDIR VSI lifetime. This makes sure we're using standard methods for all the VSI open and close paths. This also fixes a memory leak of the FDIR queue buffer info structs across a reset. Change-ID: I1b60a1b08ab923afe4f49810c2c7844d850e19b9 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
-
Shannon Nelson authored
Use the new i40e_vsi_open() for waking VSIs back up in order to be sure all the standard actions happen. Change-ID: Ic3479410dd3079733f4951dcea69f101e69e77df Signed-off-by:
-
Shannon Nelson authored
Abstract out the vsi close actions into a single function so they can be used correctly for both netdev and non-netdev based VSIs. Change-ID: I59e3d115fcb20e614a09477281b7787dd340d276 Signed-off-by:
-
Shannon Nelson authored
Rearrange the "if netdev" logic slightly to get ready for handling non-netdev VSIs. Change-ID: Ia0bfe13d4c994a2351a3c31fe725b75caeb397ee Signed-off-by:
-
Shannon Nelson authored
Reflect recent changes in firmware: - remove storm control - simplify PHY link management values - add partition bandwidth configuration Change-ID: If266ed2f9a89ad176cf8a74aeaef68613af76bc8 Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
-
Shannon Nelson authored
The NVM updates take some time and are asynchronous actions that signal their completion with an AdminQ event. This code tracks when there is an NVM update outstanding and won't allow a new update command until a completion event is received from the current update. Change-ID: Ic132fe16bd9dc09b002ed38297a877c1a01553ce Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Acked-by:
-
Anjali Singhai Jain authored
The flow spec coming in for IPv4 filters is IP_USER_FLOW, which needed some more info to be communicated up above in order for it to be displayed correctly. Change-ID: Ia968238e0d7c4c4df12908ba81f0c4501280f3ec Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
-
