- 01 Oct, 2019 11 commits
-
-
Benoit Parrot authored
We were originally attempting to stop all processing as soon as possible, but the in-progress DMA operation cannot be canceled. This led to the module being in a busy state and prevented proper power management functionality. The existing implementation would attempt to clean things up by waiting up to 50ms. However when receiving video frame at 15fps or lower, it meant an inter frame arrival rate of 66.6 ms or higher. In such cases upon tear down the following message could be seen: omap_hwmod: vpfe0: _wait_target_disable failed This patch fixes this issue by adding a stopping state where we would wait for the next Vsync before disabling the hardware. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Benoit Parrot authored
Make the ISR code simpler to follow by removing goto and relocating/eliminating duplicate spinlock accesses. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Benoit Parrot authored
Previous generation of this driver were hard coded to handle encoder/decoder where the first line never contains any data and was therefore always skipped, however when dealing with actual camera sensors the first line is always present. Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Dave Gerlach authored
Currently if vpfe is not active then it returns immediately in the suspend and resume handlers. Change this so that it always performs the pinctrl config so that we can still get proper sleep state configuration on the pins even if we do not need to worry about fully saving and restoring context. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Shuah Khan authored
After practically re-writing the driver to collpase it into a monolith, I am adding myself as a reviewer for vimc driver. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Shuah Khan authored
vimc driver is now a monolithic driver. Update the module parameter usage information to reflect that. [m.chehab+samsung@kernel.org: fix two warnings due to wrontly added spaces] Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Shuah Khan authored
Move duplicated IS_SRC and IS_SINK dfines to common header. Rename them to VIMC_IS_SRC and VIM_IS_SINK. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Shuah Khan authored
If vimc module is removed while streaming is in progress, sensor subdev unregister runs into general protection fault when it tries to unregister media entities. This is a common subdev problem related to releasing pads from v4l2_device_unregister_subdev() before calling unregister. Unregister references pads during unregistering subdev. The sd release handler is the right place for releasing all sd resources including pads. The release handlers currently release all resources except the pads. Fix v4l2_device_unregister_subdev() not release pads and release pads from the sd_int_op release handlers. kernel: [ 4136.715839] general protection fault: 0000 [#1] SMP PTI kernel: [ 4136.715847] CPU: 2 PID: 1972 Comm: bash Not tainted 5.3.0-rc2+ #4 kernel: [ 4136.715850] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 kernel: [ 4136.715858] RIP: 0010:media_gobj_destroy.part.16+0x1f/0x60 kernel: [ 4136.715863] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 fe 48 89 e5 53 48 89 fb 48 c7 c7 00 7f cf b0 e8 24 fa ff ff 48 8b 03 <48> 83 80 a0 00 00 00 01 48 8b 43 18 48 8b 53 10 48 89 42 08 48 89 kernel: [ 4136.715866] RSP: 0018:ffff9b2248fe3cb0 EFLAGS: 00010246 kernel: [ 4136.715870] RAX: bcf2bfbfa0d63c2f RBX: ffff88c3eb37e9c0 RCX: 00000000802a0018 kernel: [ 4136.715873] RDX: ffff88c3e4f6a078 RSI: ffff88c3eb37e9c0 RDI: ffffffffb0cf7f00 kernel: [ 4136.715876] RBP: ffff9b2248fe3cb8 R08: 0000000001000002 R09: ffffffffb0492b00 kernel: [ 4136.715879] R10: ffff9b2248fe3c28 R11: 0000000000000001 R12: 0000000000000038 kernel: [ 4136.715881] R13: ffffffffc09a1628 R14: ffff88c3e4f6a028 R15: fffffffffffffff2 kernel: [ 4136.715885] FS: 00007f8389647740(0000) GS:ffff88c465500000(0000) knlGS:0000000000000000 kernel: [ 4136.715888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: [ 4136.715891] CR2: 000055d008f80fd8 CR3: 00000001996ec005 CR4: 00000000000606e0 kernel: [ 4136.715894] Call Trace: kernel: [ 4136.715903] media_gobj_destroy+0x14/0x20 kernel: [ 4136.715908] __media_device_unregister_entity+0xb3/0xe0 kernel: [ 4136.715915] media_device_unregister_entity+0x30/0x40 kernel: [ 4136.715920] v4l2_device_unregister_subdev+0xa8/0xe0 kernel: [ 4136.715928] vimc_ent_sd_unregister+0x1e/0x30 [vimc] kernel: [ 4136.715933] vimc_sen_rm+0x16/0x20 [vimc] kernel: [ 4136.715938] vimc_remove+0x3e/0xa0 [vimc] kernel: [ 4136.715945] platform_drv_remove+0x25/0x50 kernel: [ 4136.715951] device_release_driver_internal+0xe0/0x1b0 kernel: [ 4136.715956] device_driver_detach+0x14/0x20 kernel: [ 4136.715960] unbind_store+0xd1/0x130 kernel: [ 4136.715965] drv_attr_store+0x27/0x40 kernel: [ 4136.715971] sysfs_kf_write+0x48/0x60 kernel: [ 4136.715976] kernfs_fop_write+0x128/0x1b0 kernel: [ 4136.715982] __vfs_write+0x1b/0x40 kernel: [ 4136.715987] vfs_write+0xc3/0x1d0 kernel: [ 4136.715993] ksys_write+0xaa/0xe0 kernel: [ 4136.715999] __x64_sys_write+0x1a/0x20 kernel: [ 4136.716005] do_syscall_64+0x5a/0x130 kernel: [ 4136.716010] entry_SYSCALL_64_after_hwframe+0x4 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Shuah Khan authored
vimc uses Component API to split the driver into functional components. The real hardware resembles a monolith structure than component and component structure added a level of complexity making it hard to maintain without adding any real benefit. The sensor is one vimc component that would makes sense to be a separate module to closely align with the real hardware. It would be easier to collapse vimc into single monolithic driver first and then split the sensor off as a separate module. Collapse it into a single monolithic driver removing the Component API. This patch removes the component API and makes minimal changes to the code base preserving the functional division of the code structure. Preserving the functional structure allows us to split the sensor off as a separate module in the future. Major design elements in this change are: - Use existing struct vimc_ent_config and struct vimc_pipeline_config to drive the initialization of the functional components. - Make vimc_device and vimc_ent_config global by moving them to vimc-common.h - Add two new hooks add and rm to initialize and register, unregister and free subdevs. - All component API is now gone and bind and unbind hooks are modified to do "add" and "rm" with minimal changes to just add and rm subdevs. - vimc-core's bind and unbind are now register and unregister. - Add a new field to vimc_device structure for saving the pointers to struct vimc_ent_device(s) subdevs create in their "add" hooks. These get used to create links and removing the subdevs. vimc-core allocates this array which sized to number of entries in the topology defined in the vimc_pipeline_config structure. - vimc-core invokes "add" hooks from its vimc_register_devices(). The "add" hooks remain the same and register subdevs. They don't create platform devices of their own and use vimc's pdev.dev as their reference device. Each "add" hook returns pointer to its struct vimc_ent_device. This is saved in the vimc_device ent_devs array. - vimc-core invokes "rm" hooks from its unregister to unregister subdevs and cleanup. - vimc-core invokes "add" and "rm" hooks with pointer to struct vimc_device and the corresponding vimc_ent_device saved in the ent_devs. The following configure and stream test works on all devices. media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]' v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
zhengbin authored
In media_device_register_entity, if media_graph_walk_init fails, need to free the previously memory. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Colin Ian King authored
Don't populate the array init_regs on the stack but instead make it static. Makes the object code smaller by 57 bytes. Before: text data bss dec hex filename 15935 3600 128 19663 4ccf drivers/media/i2c/mt9m001.o After: text data bss dec hex filename 15782 3696 128 19606 4c96 drivers/media/i2c/mt9m001.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 30 Sep, 2019 17 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A bunch of fixes that accumulated in recent weeks, mostly material for stable. Summary: - fix for regression from 5.3 that prevents to use balance convert with single profile - qgroup fixes: rescan race, accounting leak with multiple writers, potential leak after io failure recovery - fix for use after free in relocation (reported by KASAN) - other error handling fixups" * tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space btrfs: Fix a regression which we can't convert to SINGLE profile btrfs: relocation: fix use-after-free on dead relocation roots Btrfs: fix race setting up and completing qgroup rescan workers Btrfs: fix missing error return if writeback for extent buffer never started btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few more tracing fixes: - Fix a buffer overflow by checking nr_args correctly in probes - Fix a warning that is reported by clang - Fix a possible memory leak in error path of filter processing - Fix the selftest that checks for failures, but wasn't failing - Minor clean up on call site output of a memory trace event" * tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Fix same probe error test mm, tracing: Print symbol name for call_site in trace events tracing: Have error path in predicate_parse() free its allocated memory tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro tracing/probe: Fix to check the difference of nr_args before adding probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull more MMC updates from Ulf Hansson: "A couple more updates/fixes for MMC: - sdhci-pci: Add Genesys Logic GL975x support - sdhci-tegra: Recover loss in throughput for DMA - sdhci-of-esdhc: Fix DMA bug" * tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: host: sdhci-pci: Add Genesys Logic GL975x support mmc: tegra: Implement ->set_dma_mask() mmc: sdhci: Let drivers define their DMA mask mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence mmc: sdhci: improve ADMA error reporting
-
Krzysztof Wilczynski authored
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Guo Ren <guoren@kernel.org>
-
Valentin Schneider authored
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Guo Ren <guoren@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull Documentation/process update from Greg KH: "Here are two small Documentation/process/embargoed-hardware-issues.rst file updates that missed my previous char/misc pull request. The first one adds an Intel representative for the process, and the second one cleans up the text a bit more when it comes to how the disclosure rules work, as it was a bit confusing to some companies" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Clarify disclosure rules Documentation/process: Volunteer as the ambassador for Intel
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "A couple of misc patches" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs dynroot: switch to simple_dir_operations fs/handle.c - fix up kerneldoc
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "Fixes from the recent SMB3 Test events and Storage Developer Conference (held the last two weeks). Here are nine smb3 patches including an important patch for debugging traces with wireshark, with three patches marked for stable. Additional fixes from last week to better handle some newly discovered reparse points, and a fix the create/mkdir path for setting the mode more atomically (in SMB3 Create security descriptor context), and one for path name processing are still being tested so are not included here" * tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix oplock handling for SMB 2.1+ protocols smb3: missing ACL related flags smb3: pass mode bits into create calls smb3: Add missing reparse tags CIFS: fix max ea value size fs/cifs/sess.c: Remove set but not used variable 'capabilities' fs/cifs/smb2pdu.c: Make SMB2_notify_init static smb3: fix leak in "open on server" perf counter smb3: allow decryption keys to be dumped by admin for debugging
-
Mao Han authored
The csky_pmu.max_period has type u64, and BIT() can only return 32 bits unsigned long on C-SKY. The initialization for max_period will be incorrect when count_width is bigger than 32. Use BIT_ULL() Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
-
Guo Ren authored
We need set fp zero to let backtrace know the end. The patch fixup perf callchain panic problem, because backtrace didn't know what is the end of fp. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reported-by: Mao Han <han_mao@c-sky.com>
-
Mike Rapoport authored
The csky implementation of free_initrd_mem() is an open-coded version of free_reserved_area() without poisoning. Remove it and make csky use the generic version of free_initrd_mem(). Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Guo Ren <guoren@kernel.org>
-
Linus Torvalds authored
Merge active entropy generation updates. This is admittedly partly "for discussion". We need to have a way forward for the boot time deadlocks where user space ends up waiting for more entropy, but no entropy is forthcoming because the system is entirely idle just waiting for something to happen. While this was triggered by what is arguably a user space bug with GDM/gnome-session asking for secure randomness during early boot, when they didn't even need any such truly secure thing, the issue ends up being that our "getrandom()" interface is prone to that kind of confusion, because people don't think very hard about whether they want to block for sufficient amounts of entropy. The approach here-in is to decide to not just passively wait for entropy to happen, but to start actively collecting it if it is missing. This is not necessarily always possible, but if the architecture has a CPU cycle counter, there is a fair amount of noise in the exact timings of reasonably complex loads. We may end up tweaking the load and the entropy estimates, but this should be at least a reasonable starting point. As part of this, we also revert the revert of the ext4 IO pattern improvement that ended up triggering the reported lack of external entropy. * getrandom() active entropy waiting: Revert "Revert "ext4: make __ext4_get_inode_loc plug"" random: try to actively add entropy rather than passively wait for it
-
Linus Torvalds authored
This reverts commit 72dbcf72. Instead of waiting forever for entropy that may just not happen, we now try to actively generate entropy when required, and are thus hopefully avoiding the problem that caused the nice ext4 IO pattern fix to be reverted. So revert the revert. Cc: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Alexander E. Patrakov <patrakov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
For 5.3 we had to revert a nice ext4 IO pattern improvement, because it caused a bootup regression due to lack of entropy at bootup together with arguably broken user space that was asking for secure random numbers when it really didn't need to. See commit 72dbcf72 (Revert "ext4: make __ext4_get_inode_loc plug"). This aims to solve the issue by actively generating entropy noise using the CPU cycle counter when waiting for the random number generator to initialize. This only works when you have a high-frequency time stamp counter available, but that's the case on all modern x86 CPU's, and on most other modern CPU's too. What we do is to generate jitter entropy from the CPU cycle counter under a somewhat complex load: calling the scheduler while also guaranteeing a certain amount of timing noise by also triggering a timer. I'm sure we can tweak this, and that people will want to look at other alternatives, but there's been a number of papers written on jitter entropy, and this should really be fairly conservative by crediting one bit of entropy for every timer-induced jump in the cycle counter. Not because the timer itself would be all that unpredictable, but because the interaction between the timer and the loop is going to be. Even if (and perhaps particularly if) the timer actually happens on another CPU, the cacheline interaction between the loop that reads the cycle counter and the timer itself firing is going to add perturbations to the cycle counter values that get mixed into the entropy pool. As Thomas pointed out, with a modern out-of-order CPU, even quite simple loops show a fair amount of hard-to-predict timing variability even in the absense of external interrupts. But this tries to take that further by actually having a fairly complex interaction. This is not going to solve the entropy issue for architectures that have no CPU cycle counter, but it's not clear how (and if) that is solvable, and the hardware in question is largely starting to be irrelevant. And by doing this we can at least avoid some of the even more contentious approaches (like making the entropy waiting time out in order to avoid the possibly unbounded waiting). Cc: Ahmed Darwish <darwish.07@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Nicholas Mc Guire <hofrat@opentech.at> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Willy Tarreau <w@1wt.eu> Cc: Alexander E. Patrakov <patrakov@gmail.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 Sep, 2019 8 commits
-
-
Olof Johansson authored
Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARM SCMI fixes for v5.4 Couple of fixes: one in scmi reset driver initialising missed scmi handle and an other in scmi reset API implementation fixing the assignment of reset state * tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset Link: https://lore.kernel.org/r/20190918142139.GA4370@bogusSigned-off-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
More libnvdimm updates from Dan Williams: - Complete the reworks to interoperate with powerpc dynamic huge page sizes - Fix a crash due to missed accounting for the powerpc 'struct page'-memmap mapping granularity - Fix badblock initialization for volatile (DRAM emulated) pmem ranges - Stop triggering request_key() notifications to userspace when NVDIMM-security is disabled / not present - Miscellaneous small fixups * tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/region: Enable MAP_SYNC for volatile regions libnvdimm: prevent nvdimm from requesting key when security is disabled libnvdimm/region: Initialize bad block for volatile namespaces libnvdimm/nfit_test: Fix acpi_handle redefinition libnvdimm/altmap: Track namespace boundaries in altmap libnvdimm: Fix endian conversion issues libnvdimm/dax: Pick the right alignment default when creating dax devices powerpc/book3s64: Export has_transparent_hugepage() related functions.
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds authored
Pull thermal SoC updates from Eduardo Valentin: "This is a really small pull in the midst of a lot of pending patches. We are in the middle of restructuring how we are maintaining the thermal subsystem, as per discussion in our last LPC. For now, I am sending just some changes that were pending in my tree. Looking forward to get a more streamlined process in the next merge window" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: db8500: Rewrite to be a pure OF sensor thermal: db8500: Use dev helper variable thermal: db8500: Finalize device tree conversion thermal: thermal_mmio: remove some dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: - make Lenovo Yoga C630 boot now that the dependencies are merged - restore BlockProcessCall for i801, accidently removed in this merge window - a bugfix for the riic driver - an improvement to the slave-eeprom driver which should have been in the first pull request but sadly got lost in the process * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: slave-eeprom: Add read only mode i2c: i801: Bring back Block Process Call support for certain platforms i2c: riic: Clear NACK in tend isr i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "A couple of fixes for the AMD IOMMU driver have piled up: - Some fixes for the reworked IO page-table which caused memory leaks or did not allow to downgrade mappings under some conditions. - Locking fixes to fix a couple of possible races around accessing 'struct protection_domain'. The races got introduced when the dma-ops path became lock-less in the fast-path" * tag 'iommu-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Lock code paths traversing protection_domain->dev_list iommu/amd: Lock dev_data in attach/detach code paths iommu/amd: Check for busy devices earlier in attach_device() iommu/amd: Take domain->lock for complete attach/detach path iommu/amd: Remove amd_iommu_devtable_lock iommu/amd: Remove domain->updated iommu/amd: Wait for completion of IOTLB flush in attach_device iommu/amd: Unmap all L7 PTEs when downgrading page-sizes iommu/amd: Introduce first_pte_l7() helper iommu/amd: Fix downgrading default page-sizes in alloc_pte() iommu/amd: Fix pages leak in free_pagetable()
-
Thomas Gleixner authored
The role of the contact list provided by the disclosing party and how it affects the disclosure process and the ability to include experts into the development process is not really well explained. Neither is it entirely clear when the disclosing party will be informed about the fact that a developer who is not covered by an employer NDA needs to be brought in and disclosed. Explain the role of the contact list and the information policy along with an eventual conflict resolution better. Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.1909251028390.10825@nanos.tec.linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
-
- 28 Sep, 2019 4 commits
-
-
Linus Torvalds authored
Merge hugepage allocation updates from David Rientjes: "We (mostly Linus, Andrea, and myself) have been discussing offlist how to implement a sane default allocation strategy for hugepages on NUMA platforms. With these reverts in place, the page allocator will happily allocate a remote hugepage immediately rather than try to make a local hugepage available. This incurs a substantial performance degradation when memory compaction would have otherwise made a local hugepage available. This series reverts those reverts and attempts to propose a more sane default allocation strategy specifically for hugepages. Andrea acknowledges this is likely to fix the swap storms that he originally reported that resulted in the patches that removed __GFP_THISNODE from hugepage allocations. The immediate goal is to return 5.3 to the behavior the kernel has implemented over the past several years so that remote hugepages are not immediately allocated when local hugepages could have been made available because the increased access latency is untenable. The next goal is to introduce a sane default allocation strategy for hugepages allocations in general regardless of the configuration of the system so that we prevent thrashing of local memory when compaction is unlikely to succeed and can prefer remote hugepages over remote native pages when the local node is low on memory." Note on timing: this reverts the hugepage VM behavior changes that got introduced fairly late in the 5.3 cycle, and that fixed a huge performance regression for certain loads that had been around since 4.18. Andrea had this note: "The regression of 4.18 was that it was taking hours to start a VM where 3.10 was only taking a few seconds, I reported all the details on lkml when it was finally tracked down in August 2018. https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/ __GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio workload degrade like in the "current upstream" above. And it still would have been that bad as above until 5.3-rc5" where the bad behavior ends up happening as you fill up a local node, and without that change, you'd get into the nasty swap storm behavior due to compaction working overtime to make room for more memory on the nodes. As a result 5.3 got the two performance fix reverts in rc5. However, David Rientjes then noted that those performance fixes in turn regressed performance for other loads - although not quite to the same degree. He suggested reverting the reverts and instead replacing them with two small changes to how hugepage allocations are done (patch descriptions rephrased by me): - "avoid expensive reclaim when compaction may not succeed": just admit that the allocation failed when you're trying to allocate a huge-page and compaction wasn't successful. - "allow hugepage fallback to remote nodes when madvised": when that node-local huge-page allocation failed, retry without forcing the local node. but by then I judged it too late to replace the fixes for a 5.3 release. So 5.3 was released with behavior that harked back to the pre-4.18 logic. But now we're in the merge window for 5.4, and we can see if this alternate model fixes not just the horrendous swap storm behavior, but also restores the performance regression that the late reverts caused. Fingers crossed. * emailed patches from David Rientjes <rientjes@google.com>: mm, page_alloc: allow hugepage fallback to remote nodes when madvised mm, page_alloc: avoid expensive reclaim when compaction may not succeed Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask"" Revert "Revert "mm, thp: restore node-local hugepage allocations""
-
Steven Rostedt (VMware) authored
The "same probe" selftest that tests that adding the same probe fails doesn't add the same probe and passes, which fails the test. Fixes: b78b94b8 ("selftests/ftrace: Update kprobe event error testcase") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Changbin Du authored
To improve the readability of raw slab trace points, print the call_site ip using '%pS'. Then we can grep events with function names. [002] .... 808.188897: kmem_cache_free: call_site=putname+0x47/0x50 ptr=00000000cef40c80 [002] .... 808.188898: kfree: call_site=security_cred_free+0x42/0x50 ptr=0000000062400820 [002] .... 808.188904: kmem_cache_free: call_site=put_cred_rcu+0x88/0xa0 ptr=0000000058d74ef8 [002] .... 808.188913: kmem_cache_alloc: call_site=prepare_creds+0x26/0x100 ptr=0000000058d74ef8 bytes_req=168 bytes_alloc=576 gfp_flags=GFP_KERNEL [002] .... 808.188917: kmalloc: call_site=security_prepare_creds+0x77/0xa0 ptr=0000000062400820 bytes_req=8 bytes_alloc=336 gfp_flags=GFP_KERNEL|__GFP_ZERO [002] .... 808.188920: kmem_cache_alloc: call_site=getname_flags+0x4f/0x1e0 ptr=00000000cef40c80 bytes_req=4096 bytes_alloc=4480 gfp_flags=GFP_KERNEL [002] .... 808.188925: kmem_cache_free: call_site=putname+0x47/0x50 ptr=00000000cef40c80 [002] .... 808.188926: kfree: call_site=security_cred_free+0x42/0x50 ptr=0000000062400820 [002] .... 808.188931: kmem_cache_free: call_site=put_cred_rcu+0x88/0xa0 ptr=0000000058d74ef8 Link: http://lkml.kernel.org/r/20190914103215.23301-1-changbin.du@gmail.comSigned-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Navid Emamdoost authored
In predicate_parse, there is an error path that is not going to out_free instead it returns directly which leads to a memory leak. Link: http://lkml.kernel.org/r/20190920225800.3870-1-navid.emamdoost@gmail.comSigned-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-