- 03 Jul, 2009 1 commit
-
-
Hannes Reinecke authored
When doing an unexpected shutdown like kexec the cciss firmware might still have some commands in flight, which it is trying to complete. The driver is doing it's best on resetting the HBA, but sadly there's a firmware issue causing the firmware _not_ to abort or drop old commands. So the firmware will send us commands which we haven't accounted for, causing the driver to panic. With this patch we're just ignoring these commands as there is nothing we could be doing with them anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <axboe@carl.(none)>
-
- 01 Jul, 2009 39 commits
-
-
Randy Dunlap authored
Somehow I managed to generate a diff that put these 2 lines into the wrong function: should have been in dump_struct() instead of in dump_enum(). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: mtd: nand: fix build failure and incorrect return from omap_wait() mtd: Use BLOCK_NIL consistently in NFTL/INFTL mtd: m25p80 timeout too short for worst-case m25p16 devices mtd: atmel_nand: Fix typo s/parititions/partitions/ mtd: cmdlineparts: Use 64-bit format when printing a debug message. mtd: maps: Remove BUS_ID_SIZE from integrator_flash jffs2: fix another potential leak on error path in scan.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: invalidation reverse calls fuse: allow umask processing in userspace fuse: fix bad return value in fuse_file_poll() fuse: fix return value of fuse_dev_write()
-
David Woodhouse authored
This fixes kernel.org bug #13584. The IOVA code attempted to optimise the insertion of new ranges into the rbtree, with the unfortunate result that some ranges just didn't get inserted into the tree at all. Then those ranges would be handed out more than once, and things kind of go downhill from there. Introduced after 2.6.25 by ddf02886 ("PCI: iova RB tree setup tweak"). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: mark gross <mgross@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Woodhouse authored
We can run a 32-bit kernel on boxes with an IOMMU, so we need pci_unmap_addr() etc. to work -- without it, drivers will leak mappings. To be honest, this whole thing looks like it's more pain than it's worth; I'm half inclined to remove the no-op #else case altogether. But this is the minimal fix, which just does the right thing if CONFIG_DMAR is set. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org [ for 2.6.30 ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Amerigo Wang authored
Check before use it. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: remove redundant check for NULL cfqq in cfq_set_request() blocK: Restore barrier support for md and probably other virtual devices. block: get rid of queue-private command filter block: Create bip slabs with embedded integrity vectors cfq-iosched: get rid of the need for __GFP_NOFAIL in cfq_find_alloc_queue() cfq-iosched: move cfqq initialization out of cfq_find_alloc_queue() Trivial typo fixes in Documentation/block/data-integrity.txt.
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: use interruptible wait when duration is controlled by userspace. md/raid5: suspend shouldn't affect read requests. md: tidy up error paths in md_alloc md: fix error path when duplicate name is found on md device creation. md: avoid dereferencing NULL pointer when accessing suspend_* sysfs attributes. md: Use new topology calls to indicate alignment and I/O sizes
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits) Revert "ipv4: arp announce, arp_proxy and windows ip conflict verification" igb: return PCI_ERS_RESULT_DISCONNECT on permanent error e1000e: io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT e1000: return PCI_ERS_RESULT_DISCONNECT on permanent error e1000: fix unmap bug igb: fix unmap length bug ixgbe: fix unmap length bug ixgbe: Fix link capabilities during adapter resets ixgbe: Fix device capabilities of 82599 single speed fiber NICs. ixgbe: Fix SFP log messages usbnet: Remove private stats structure usbnet: Use netdev stats structure smsc95xx: Use netdev stats structure rndis_host: Use netdev stats structure net1080: Use netdev stats structure dm9601: Use netdev stats structure cdc_eem: Use netdev stats structure ipv4: Fix fib_trie rebalancing, part 3 bnx2x: Fix the behavior of ethtool when ONBOOT=no sctp: xmit sctp packet always return no route error ...
-
Ingo Molnar authored
One of the kmemleak changes caused the following scheduling-while-holding-the-tasklist-lock regression on x86: BUG: sleeping function called from invalid context at mm/kmemleak.c:795 in_atomic(): 1, irqs_disabled(): 0, pid: 1737, name: kmemleak 2 locks held by kmemleak/1737: #0: (scan_mutex){......}, at: [<c10c4376>] kmemleak_scan_thread+0x45/0x86 #1: (tasklist_lock){......}, at: [<c10c3bb4>] kmemleak_scan+0x1a9/0x39c Pid: 1737, comm: kmemleak Not tainted 2.6.31-rc1-tip #59266 Call Trace: [<c105ac0f>] ? __debug_show_held_locks+0x1e/0x20 [<c102e490>] __might_sleep+0x10a/0x111 [<c10c38d5>] scan_yield+0x17/0x3b [<c10c3970>] scan_block+0x39/0xd4 [<c10c3bc6>] kmemleak_scan+0x1bb/0x39c [<c10c4331>] ? kmemleak_scan_thread+0x0/0x86 [<c10c437b>] kmemleak_scan_thread+0x4a/0x86 [<c104d73e>] kthread+0x6e/0x73 [<c104d6d0>] ? kthread+0x0/0x73 [<c100959f>] kernel_thread_helper+0x7/0x10 kmemleak: 834 new suspected memory leaks (see /sys/kernel/debug/kmemleak) The bit causing it is highly dubious: static void scan_yield(void) { might_sleep(); if (time_is_before_eq_jiffies(next_scan_yield)) { schedule(); next_scan_yield = jiffies + jiffies_scan_yield; } } It called deep inside the codepath and in a conditional way, and that is what crapped up when one of the new scan_block() uses grew a tasklist_lock dependency. This minimal patch removes that yielding stuff and adds the proper cond_resched(). The background scanning thread could probably also be reniced to +10. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Shan Wei authored
With the changes for falling back to an oom_cfqq, we never fail to find/allocate a queue in cfq_get_queue(). So remove the check. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
NeilBrown authored
The next_ordered flag is only meaningful for devices that use __make_request. So move the test against next_ordered out of generic code and in to __make_request Since this test was added, barriers have not worked on md or any devices that don't use __make_request and so don't bother to set next_ordered. (dm explicitly sets something other than QUEUE_ORDERED_NONE since commit 99360b4c but notes in the comments that it is otherwise meaningless). Cc: Ken Milmore <ken.milmore@googlemail.com> Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
The initial patches to support this through sysfs export were broken and have been if 0'ed out in any release. So lets just kill the code and reclaim some space in struct request_queue, if anyone would later like to fixup the sysfs bits, the git history can easily restore the removed bits. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Martin K. Petersen authored
This patch restores stacking ability to the block layer integrity infrastructure by creating a set of dedicated bip slabs. Each bip slab has an embedded bio_vec array at the end. This cuts down on memory allocations and also simplifies the code compared to the original bvec version. Only the largest bip slab is backed by a mempool. The pool is contained in the bio_set so stacking drivers can ensure forward progress. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@carl.(none)>
-
Jens Axboe authored
Setup an emergency fallback cfqq that we allocate at IO scheduler init time. If the slab allocation fails in cfq_find_alloc_queue(), we'll just punt IO to that cfqq instead. This ensures that cfq_find_alloc_queue() never fails without having to ensure free memory. On cfqq lookup, always try to allocate a new cfqq if the given cfq io context has the oom_cfqq assigned. This ensures that we only temporarily punt to this shared queue. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
We're going to be needing that init code outside of that function to get rid of the __GFP_NOFAIL in cfqq allocation. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Andre Noll authored
Signed-off-by: Andre Noll <maan@systemlinux.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
NeilBrown authored
User space can set various limits on an md array so that resync waits when it gets to a certain point, or so that I/O is blocked for a short while. When md is waiting against one of these limit, it should use an interruptible wait so as not to add to the load average, and so are not to trigger a warning if the wait goes on for too long. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
md allows write to regions on an array to be suspended temporarily. This allows user-space to participate is aspects of reshape. In particular, data can be copied with not risk of a race. We should not be blocking read requests though, so don't. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
-
Eric W. Biederman authored
This reverts commit 73ce7b01. After discovering that we don't listen to gratuitious arps in 2.6.30 I tracked the failure down to this commit. The patch makes absolutely no sense. RFC2131 RFC3927 and RFC5227. are all in agreement that an arp request with sip == 0 should be used for the probe (to prevent learning) and an arp request with sip == tip should be used for the gratitous announcement that people can learn from. It appears the author of the broken patch got those two cases confused and modified the code to drop all gratuitous arp traffic. Ouch! Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
PCI drivers that implement the io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This patch fixes the issue for igb. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike Mason authored
on permanent failure PCI drivers that implement the io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This state is not checked in many of the network drivers. This patch fixes the omission in the e1000e driver. Signed-off-by: Mike Mason <mmlnx@us.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andre Detsch authored
PCI drivers that implement the io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT if the state passed in is pci_channel_io_perm_failure. This state is not checked in many of the network drivers. The patch fixes the omission in the e1000 driver. Based on Mike Mason's similar patch for e1000e. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> CC: Mike Mason <mmlnx@us.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
as reported by kerneloops.org [ 121.781161] ------------[ cut here ]------------ [ 121.781171] WARNING: at lib/dma-debug.c:793 check_unmap+0x14e/0x577() [ 121.781173] Hardware name: S5520HC [ 121.781177] e1000 0000:0a:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000001d688b0fa] [size=1522 bytes] [ 121.781180] Modules linked in: e1000 mdio dca [last unloaded: ixgbe] [ 121.781187] Pid: 4793, comm: bash Tainted: P 2.6.30-master-06161113 #3 [ 121.781190] Call Trace: [ 121.781195] [<ffffffff8123056f>] ? check_unmap+0x14e/0x577 [ 121.781201] [<ffffffff81057a19>] warn_slowpath_common+0x77/0x8f [ 121.781205] [<ffffffff81057ae1>] warn_slowpath_fmt+0x9f/0xa1 [ 121.781212] [<ffffffff81477ce2>] ? _spin_lock_irqsave+0x3f/0x49 [ 121.781216] [<ffffffff8122fa97>] ? get_hash_bucket+0x28/0x33 [ 121.781220] [<ffffffff8123056f>] check_unmap+0x14e/0x577 [ 121.781225] [<ffffffff810e4f48>] ? check_bytes_and_report+0x38/0xcb [ 121.781230] [<ffffffff81230bbf>] debug_dma_unmap_page+0x80/0x92 [ 121.781234] [<ffffffff8122e549>] ? unmap_single+0x1a/0x4e [ 121.781239] [<ffffffff813901e1>] ? __kfree_skb+0x74/0x78 [ 121.781250] [<ffffffffa00662ef>] pci_unmap_single+0x64/0x6d [e1000] [ 121.781259] [<ffffffffa0066344>] e1000_clean_rx_ring+0x4c/0xbf [e1000] [ 121.781268] [<ffffffffa00663df>] e1000_clean_all_rx_rings+0x28/0x36 [e1000] [ 121.781277] [<ffffffffa0067464>] e1000_down+0x138/0x141 [e1000] [ 121.781286] [<ffffffffa00681c2>] __e1000_shutdown+0x6b/0x198 [e1000] [ 121.781296] [<ffffffffa0068405>] e1000_suspend+0x17/0x50 [e1000] [ 121.781301] [<ffffffff81237665>] pci_legacy_suspend+0x3b/0xbe [ 121.781305] [<ffffffff81237bc6>] pci_pm_suspend+0x3e/0xf1 [ 121.781310] [<ffffffff812eaf1c>] pm_op+0x57/0xde [ 121.781314] [<ffffffff812eb444>] dpm_suspend_start+0x31e/0x470 [ 121.781319] [<ffffffff810877da>] suspend_devices_and_enter+0x3e/0x1a2 [ 121.781323] [<ffffffff81087a0f>] enter_state+0xd1/0x127 [ 121.781327] [<ffffffff8108717a>] state_store+0xa7/0xc9 [ 121.781332] [<ffffffff81221843>] kobj_attr_store+0x17/0x19 [ 121.781336] [<ffffffff8113c01e>] sysfs_write_file+0xe5/0x121 [ 121.781341] [<ffffffff810ed165>] vfs_write+0xab/0x105 [ 121.781344] [<ffffffff810ed279>] sys_write+0x47/0x6d [ 121.781349] [<ffffffff81027aab>] system_call_fastpath+0x16/0x1b [ 121.781352] ---[ end trace 97bacaaac2ed7786 ]--- Fix is to correctly zero out internal ->dma value when unmapping and make sure never to unmap unless there specifically was a mapping done. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
driver was mixing NET_IP_ALIGN count bytes in map/unmap calls unevenly. Only map the bytes that the hardware might dma into also fix unmap related bug where ->dma was not being cleared after unmap Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
This patch addresses three WARN_ON statements from DMA-API debug code ixgbe is mapping more than it unmaps, reduce the length of the map call and remove the "used once" local variable. found by Joerg Roedel <joerg.roedel@amd.com> in 2.6.30, so is a candidate for -stable. in addition, fix missing ->dma = 0 after unmap to prevent double free with pci_unmap_single and lastly, don't unmap (half) pages that aren't mapped. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mallikarjuna R Chilakala authored
Adapter link advertisement capabilities were not persistent during adapter resets. While configuring multispeed fiber link check for phy autoneg_advertised settings before overwriting with default link capabilities Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mallikarjuna R Chilakala authored
82599 single speed fiber modules only support 10G/Full. Return proper device capabilities while querrying the adapter and error while changing device advertisement/speed/duplex capabilities. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
We had a wide range of log messages for the same sort of SFP failure. This patch makes them all more similar and less confusing along with converting them to dev_err. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that nothing uses the private stats structure we can remove it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that netdev has its own stats structure we should use that instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that netdev has its own stats structure we should use that instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that netdev has its own stats structure we should use that instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that netdev has its own stats structure we should use that instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that netdev has its own stats structure we should use that instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Now that netdev has its own stats structure we should use that instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
NeilBrown authored
As the recent bug in md_alloc showed, having a single exit path for unlocking and putting is a good idea. So restructure md_alloc to have a single mutex_unlock and mddev_put, and use gotos where necessary. Found-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
When an md device is created by name (rather than number) we need to check that the name is not already in use. If this check finds a duplicate, we return an error without dropping the lock or freeing the newly create mddev. This patch fixes that. Cc: stable@kernel.org Found-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
-
git://linux-arm.org/linux-2.6Linus Torvalds authored
* 'kmemleak' of git://linux-arm.org/linux-2.6: kmemleak: Inform kmemleak about pid_hash kmemleak: Do not warn if an unknown object is freed kmemleak: Do not report new leaked objects if the scanning was stopped kmemleak: Slightly change the policy on newly allocated objects kmemleak: Do not trigger a scan when reading the debug/kmemleak file kmemleak: Simplify the reports logged by the scanning thread kmemleak: Enable task stacks scanning by default kmemleak: Allow the early log buffer to be configurable.
-