- 31 Aug, 2020 13 commits
-
-
Magnus Karlsson authored
Add support to share a umem between queue ids on the same device. This mode can be invoked with the XDP_SHARED_UMEM bind flag. Previously, sharing was only supported within the same queue id and device, and you shared one set of fill and completion rings. However, note that when sharing a umem between queue ids, you need to create a fill ring and a completion ring and tie them to the socket before you do the bind with the XDP_SHARED_UMEM flag. This so that the single-producer single-consumer semantics can be upheld. Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/1598603189-32145-12-git-send-email-magnus.karlsson@intel.com
-
Magnus Karlsson authored
Test for dma_need_sync earlier to increase performance. xsk_buff_dma_sync_for_cpu() takes an xdp_buff as parameter and from that the xsk_buff_pool reference is dug out. Perf shows that this dereference causes a lot of cache misses. But as the buffer pool is now sent down to the driver at zero-copy initialization time, we might as well use this pointer directly, instead of going via the xsk_buff and we can do so already in xsk_buff_dma_sync_for_cpu() instead of in xp_dma_sync_for_cpu. This gets rid of these cache misses. Throughput increases with 3% for the xdpsock l2fwd sample application on my machine. Signed-off-by:
-
Magnus Karlsson authored
Rearrange the xdp_sock, xdp_umem and xsk_buff_pool structures so that they get smaller and align better to the cache lines. In the previous commits of this patch set, these structs have been reordered with the focus on functionality and simplicity, not performance. This patch improves throughput performance by around 3%. Signed-off-by:
-
Magnus Karlsson authored
Enable the sharing of dma mappings by moving them out from the buffer pool. Instead we put each dma mapped umem region in a list in the umem structure. If dma has already been mapped for this umem and device, it is not mapped again and the existing dma mappings are reused. Signed-off-by:
-
Magnus Karlsson authored
Replicate the addrs pointer in the buffer pool to the umem. This mapping will be the same for all buffer pools sharing the same umem. In the buffer pool we leave the addrs pointer for performance reasons. Signed-off-by:
-
Magnus Karlsson authored
Move the xsk_tx_list and the xsk_tx_list_lock from the umem to the buffer pool. This so that we in a later commit can share the umem between multiple HW queues. There is one xsk_tx_list per device and queue id, so it should be located in the buffer pool. Signed-off-by:
-
Magnus Karlsson authored
Move queue_id, dev, and need_wakeup from the umem to the buffer pool. This so that we in a later commit can share the umem between multiple HW queues. There is one buffer pool per dev and queue id, so these variables should belong to the buffer pool, not the umem. Need_wakeup is also something that is set on a per napi level, so there is usually one per device and queue id. So move this to the buffer pool too. Signed-off-by:
-
Magnus Karlsson authored
Move the fill and completion rings from the umem to the buffer pool. This so that we in a later commit can share the umem between multiple HW queue ids. In this case, we need one fill and completion ring per queue id. As the buffer pool is per queue id and napi id this is a natural place for it and one umem struture can be shared between these buffer pools. Signed-off-by:
-
Magnus Karlsson authored
Create and free the buffer pool independently from the umem. Move these operations that are performed on the buffer pool from the umem create and destroy functions to new create and destroy functions just for the buffer pool. This so that in later commits we can instantiate multiple buffer pools per umem when sharing a umem between HW queues and/or devices. We also erradicate the back pointer from the umem to the buffer pool as this will not work when we introduce the possibility to have multiple buffer pools per umem. Signed-off-by:
-
Magnus Karlsson authored
Rename the AF_XDP zero-copy driver interface functions to better reflect what they do after the replacement of umems with buffer pools in the previous commit. Mostly it is about replacing the umem name from the function names with xsk_buff and also have them take the a buffer pool pointer instead of a umem. The various ring functions have also been renamed in the process so that they have the same naming convention as the internal functions in xsk_queue.h. This so that it will be clearer what they do and also for consistency. Signed-off-by:
-
Magnus Karlsson authored
Replace the explicit umem reference passed to the driver in AF_XDP zero-copy mode with the buffer pool instead. This in preparation for extending the functionality of the zero-copy mode so that umems can be shared between queues on the same netdev and also between netdevs. In this commit, only an umem reference has been added to the buffer pool struct. But later commits will add other entities to it. These are going to be entities that are different between different queue ids and netdevs even though the umem is shared between them. Signed-off-by:
-
Alexei Starovoitov authored
resolve_btfids doesn't like empty set. Add unused ID when BPF_LSM is off. Fixes: 1e6c62a8 ("bpf: Introduce sleepable BPF programs") Reported-by:
Björn Töpel <bjorn.topel@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Song Liu <songliubraving@fb.com> Acked-by:
KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20200831163132.66521-1-alexei.starovoitov@gmail.com
-
Alexei Starovoitov authored
When CONFIG_BPF_SYSCALL is not set, but CONFIG_BPF_JIT=y the kernel build fails: In file included from ../kernel/bpf/trampoline.c:11: ../kernel/bpf/trampoline.c: In function ‘bpf_trampoline_update’: ../kernel/bpf/trampoline.c:220:39: error: ‘call_rcu_tasks_trace’ undeclared ../kernel/bpf/trampoline.c: In function ‘__bpf_prog_enter_sleepable’: ../kernel/bpf/trampoline.c:411:2: error: implicit declaration of function ‘rcu_read_lock_trace’ ../kernel/bpf/trampoline.c: In function ‘__bpf_prog_exit_sleepable’: ../kernel/bpf/trampoline.c:416:2: error: implicit declaration of function ‘rcu_read_unlock_trace’ This is due to: obj-$(CONFIG_BPF_JIT) += trampoline.o obj-$(CONFIG_BPF_JIT) += dispatcher.o There is a number of functions that arch/x86/net/bpf_jit_comp.c is using from these two files, but none of them will be used when only cBPF is on (which is the case for BPF_SYSCALL=n BPF_JIT=y). Add rcu_trace functions to rcupdate_trace.h. The JITed code won't execute them and BPF trampoline logic won't be used without BPF_SYSCALL. Fixes: 1e6c62a8 ("bpf: Introduce sleepable BPF programs") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/bpf/20200831155155.62754-1-alexei.starovoitov@gmail.com
-
- 28 Aug, 2020 11 commits
-
-
Daniel Borkmann authored
Alexei Starovoitov says: ==================== v2->v3: - switched to minimal allowlist approach. Essentially that means that syscall entry, few btrfs allow_error_inject functions, should_fail_bio(), and two LSM hooks: file_mprotect and bprm_committed_creds are the only hooks that allow attaching of sleepable BPF programs. When comprehensive analysis of LSM hooks will be done this allowlist will be extended. - added patch 1 that fixes prototypes of two mm functions to reliably work with error injection. It's also necessary for resolve_btfids tool to recognize these two funcs, but that's secondary. v1->v2: - split fmod_ret fix into separate patch - added denylist v1: This patch set introduces the minimal viable support for sleepable bpf programs. In this patch only fentry/fexit/fmod_ret and lsm progs can be sleepable. Only array and pre-allocated hash and lru maps allowed. Here is 'perf report' difference of sleepable vs non-sleepable: 3.86% bench [k] __srcu_read_unlock 3.22% bench [k] __srcu_read_lock 0.92% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep 0.50% bench [k] bpf_trampoline_10297 0.26% bench [k] __bpf_prog_exit_sleepable 0.21% bench [k] __bpf_prog_enter_sleepable vs 0.88% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry 0.84% bench [k] bpf_trampoline_10297 0.13% bench [k] __bpf_prog_enter 0.12% bench [k] __bpf_prog_exit vs 0.79% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep 0.72% bench [k] bpf_trampoline_10381 0.31% bench [k] __bpf_prog_exit_sleepable 0.29% bench [k] __bpf_prog_enter_sleepable Sleepable vs non-sleepable program invocation overhead is only marginally higher due to rcu_trace. srcu approach is much slower. ==================== Signed-off-by: -
Alexei Starovoitov authored
Modify few tests to sanity test sleepable bpf functionality. Running 'bench trig-fentry-sleep' vs 'bench trig-fentry' and 'perf report': sleepable with SRCU: 3.86% bench [k] __srcu_read_unlock 3.22% bench [k] __srcu_read_lock 0.92% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep 0.50% bench [k] bpf_trampoline_10297 0.26% bench [k] __bpf_prog_exit_sleepable 0.21% bench [k] __bpf_prog_enter_sleepable sleepable with RCU_TRACE: 0.79% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep 0.72% bench [k] bpf_trampoline_10381 0.31% bench [k] __bpf_prog_exit_sleepable 0.29% bench [k] __bpf_prog_enter_sleepable non-sleepable with RCU: 0.88% bench [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry 0.84% bench [k] bpf_trampoline_10297 0.13% bench [k] __bpf_prog_enter 0.12% bench [k] __bpf_prog_exit Signed-off-by:
-
Alexei Starovoitov authored
Pass request to load program as sleepable via ".s" suffix in the section name. If it happens in the future that all map types and helpers are allowed with BPF_F_SLEEPABLE flag "fmod_ret/" and "lsm/" can be aliased to "fmod_ret.s/" and "lsm.s/" to make all lsm and fmod_ret programs sleepable by default. The fentry and fexit programs would always need to have sleepable vs non-sleepable distinction, since not all fentry/fexit progs will be attached to sleepable kernel functions. Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200827220114.69225-5-alexei.starovoitov@gmail.com
-
Alexei Starovoitov authored
Sleepable BPF programs can now use copy_from_user() to access user memory. Signed-off-by:
-
Alexei Starovoitov authored
Introduce sleepable BPF programs that can request such property for themselves via BPF_F_SLEEPABLE flag at program load time. In such case they will be able to use helpers like bpf_copy_from_user() that might sleep. At present only fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only when they are attached to kernel functions that are known to allow sleeping. The non-sleepable programs are relying on implicit rcu_read_lock() and migrate_disable() to protect life time of programs, maps that they use and per-cpu kernel structures used to pass info between bpf programs and the kernel. The sleepable programs cannot be enclosed into rcu_read_lock(). migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs should not be enclosed in migrate_disable() as well. Therefore rcu_read_lock_trace is used to protect the life time of sleepable progs. There are many networking and tracing program types. In many cases the 'struct bpf_prog *' pointer itself is rcu protected within some other kernel data structure and the kernel code is using rcu_dereference() to load that program pointer and call BPF_PROG_RUN() on it. All these cases are not touched. Instead sleepable bpf programs are allowed with bpf trampoline only. The program pointers are hard-coded into generated assembly of bpf trampoline and synchronize_rcu_tasks_trace() is used to protect the life time of the program. The same trampoline can hold both sleepable and non-sleepable progs. When rcu_read_lock_trace is held it means that some sleepable bpf program is running from bpf trampoline. Those programs can use bpf arrays and preallocated hash/lru maps. These map types are waiting on programs to complete via synchronize_rcu_tasks_trace(); Updates to trampoline now has to do synchronize_rcu_tasks_trace() and synchronize_rcu_tasks() to wait for sleepable progs to finish and for trampoline assembly to finish. This is the first step of introducing sleepable progs. Eventually dynamically allocated hash maps can be allowed and networking program types can become sleepable too. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Acked-by:
-
Alexei Starovoitov authored
'static' and 'static noinline' function attributes make no guarantees that gcc/clang won't optimize them. The compiler may decide to inline 'static' function and in such case ALLOW_ERROR_INJECT becomes meaningless. The compiler could have inlined __add_to_page_cache_locked() in one callsite and didn't inline in another. In such case injecting errors into it would cause unpredictable behavior. It's worse with 'static noinline' which won't be inlined, but it still can be optimized. Like the compiler may decide to remove one argument or constant propagate the value depending on the callsite. To avoid such issues make sure that these functions are global noinline. Fixes: af3b8544 ("mm/page_alloc.c: allow error injection") Fixes: cfcbfb13 ("mm/filemap.c: enable error injection at add_to_page_cache()") Signed-off-by:
-
Martin KaFai Lau authored
This patch tests the inner map size can be different for reuseport_sockarray but has to be the same for arraymap. A new subtest "diff_size" is added for this. The existing test is moved to a subtest "lookup_update". Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Martin KaFai Lau authored
Most of the maps do not use max_entries during verification time. Thus, those map_meta_equal() do not need to enforce max_entries when it is inserted as an inner map during runtime. The max_entries check is removed from the default implementation bpf_map_meta_equal(). The prog_array_map and xsk_map are exception. Its map_gen_lookup uses max_entries to generate inline lookup code. Thus, they will implement its own map_meta_equal() to enforce max_entries. Since there are only two cases now, the max_entries check is not refactored and stays in its own .c file. Signed-off-by:
-
Martin KaFai Lau authored
Some properties of the inner map is used in the verification time. When an inner map is inserted to an outer map at runtime, bpf_map_meta_equal() is currently used to ensure those properties of the inserting inner map stays the same as the verification time. In particular, the current bpf_map_meta_equal() checks max_entries which turns out to be too restrictive for most of the maps which do not use max_entries during the verification time. It limits the use case that wants to replace a smaller inner map with a larger inner map. There are some maps do use max_entries during verification though. For example, the map_gen_lookup in array_map_ops uses the max_entries to generate the inline lookup code. To accommodate differences between maps, the map_meta_equal is added to bpf_map_ops. Each map-type can decide what to check when its map is used as an inner map during runtime. Also, some map types cannot be used as an inner map and they are currently black listed in bpf_map_meta_alloc() in map_in_map.c. It is not unusual that the new map types may not aware that such blacklist exists. This patch enforces an explicit opt-in and only allows a map to be used as an inner map if it has implemented the map_meta_equal ops. It is based on the discussion in [1]. All maps that support inner map has its map_meta_equal points to bpf_map_meta_equal in this patch. A later patch will relax the max_entries check for most maps. bpf_types.h counts 28 map types. This patch adds 23 ".map_meta_equal" by using coccinelle. -5 for BPF_MAP_TYPE_PROG_ARRAY BPF_MAP_TYPE_(PERCPU)_CGROUP_STORAGE BPF_MAP_TYPE_STRUCT_OPS BPF_MAP_TYPE_ARRAY_OF_MAPS BPF_MAP_TYPE_HASH_OF_MAPS The "if (inner_map->inner_map_meta)" check in bpf_map_meta_alloc() is moved such that the same error is returned. [1]: https://lore.kernel.org/bpf/20200522022342.899756-1-kafai@fb.com/Signed-off-by:
-
Yonghong Song authored
bpf_link_info.iter is used by link_query to return bpf_iter_link_info to user space. Fields may be different, e.g., map_fd vs. map_id, so we cannot reuse the exact structure. But make them similar, e.g., struct bpf_link_info { /* common fields */ union { struct { ... } raw_tracepoint; struct { ... } tracing; ... struct { /* common fields for iter */ union { struct { __u32 map_id; } map; /* other structs for other targets */ }; }; }; }; so the structure is extensible the same way as bpf_iter_link_info. Fixes: 6b0a249a ("bpf: Implement link_query for bpf iterators") Signed-off-by:Yonghong Song <yhs@fb.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
The system for "Auto-detecting system features" located under tools/build/ are (currently) used by perf, libbpf and bpftool. It can contain stalled feature detection files, which are not cleaned up by libbpf and bpftool on make clean (side-note: perf tool is correct). Fix this by making the users invoke the make clean target. Some details about the changes. The libbpf Makefile already had a clean-config target (which seems to be copy-pasted from perf), but this target was not "connected" (a make dependency) to clean target. Choose not to rename target as someone might be using it. Did change the output from "CLEAN config" to "CLEAN feature-detect", to make it more clear what happens. This is related to the complaint and troubleshooting in the following link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/lkml/20200818122007.2d1cfe2d@carbon/ Link: https://lore.kernel.org/bpf/159851841661.1072907.13770213104521805592.stgit@firesoul
-
- 27 Aug, 2020 3 commits
-
-
Andrii Nakryiko authored
Fix compilation warnings due to __u64 defined differently as `unsigned long` or `unsigned long long` on different architectures (e.g., ppc64le differs from x86-64). Also cast one argument to size_t to fix printf warning of similar nature. Fixes: eacaaed7 ("libbpf: Implement enum value-based CO-RE relocations") Fixes: 50e09460 ("libbpf: Skip well-known ELF sections when iterating ELF") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Yonghong Song authored
Added some test_verifier bounds check test cases for xor operations. $ ./test_verifier ... #78/u bounds check for reg = 0, reg xor 1 OK #78/p bounds check for reg = 0, reg xor 1 OK #79/u bounds check for reg32 = 0, reg32 xor 1 OK #79/p bounds check for reg32 = 0, reg32 xor 1 OK #80/u bounds check for reg = 2, reg xor 3 OK #80/p bounds check for reg = 2, reg xor 3 OK #81/u bounds check for reg = any, reg xor 3 OK #81/p bounds check for reg = any, reg xor 3 OK #82/u bounds check for reg32 = any, reg32 xor 3 OK #82/p bounds check for reg32 = any, reg32 xor 3 OK #83/u bounds check for reg > 0, reg xor 3 OK #83/p bounds check for reg > 0, reg xor 3 OK #84/u bounds check for reg32 > 0, reg32 xor 3 OK #84/p bounds check for reg32 > 0, reg32 xor 3 OK ... Signed-off-by:
-
Yonghong Song authored
bpf selftest test_progs/test_sk_assign failed with llvm 11 and llvm 12. Compared to llvm 10, llvm 11 and 12 generates xor instruction which is not handled properly in verifier. The following illustrates the problem: 16: (b4) w5 = 0 17: ... R5_w=inv0 ... ... 132: (a4) w5 ^= 1 133: ... R5_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ... ... 37: (bc) w8 = w5 38: ... R5=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R8_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ... ... 41: (bc) w3 = w8 42: ... R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) ... 45: (56) if w3 != 0x0 goto pc+1 ... R3_w=inv0 ... 46: (b7) r1 = 34 47: R1_w=inv34 R7=pkt(id=0,off=26,r=38,imm=0) 47: (0f) r7 += r1 48: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0) 48: (b4) w9 = 0 49: R1_w=invP34 R3_w=inv0 R7_w=pkt(id=0,off=60,r=38,imm=0) 49: (69) r1 = *(u16 *)(r7 +0) invalid access to packet, off=60 size=2, R7(id=0,off=60,r=38) R7 offset is outside of the packet At above insn 132, w5 = 0, but after w5 ^= 1, we give a really conservative value of w5. At insn 45, in reality the condition should be always false. But due to conservative value for w3, the verifier evaluates it could be true and this later leads to verifier failure complaining potential packet out-of-bound access. This patch implemented proper XOR support in verifier. In the above example, we have: 132: R5=invP0 132: (a4) w5 ^= 1 133: R5_w=invP1 ... 37: (bc) w8 = w5 ... 41: (bc) w3 = w8 42: R3_w=invP1 ... 45: (56) if w3 != 0x0 goto pc+1 47: R3_w=invP1 ... processed 353 insns ... and the verifier can verify the program successfully. Signed-off-by:John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200825064608.2017937-1-yhs@fb.com
-
- 26 Aug, 2020 8 commits
-
-
Alex Gartrell authored
There are code paths where EINVAL is returned directly without setting errno. In that case, errno could be 0, which would mask the failure. For example, if a careless programmer set log_level to 10000 out of laziness, they would have to spend a long time trying to figure out why. Fixes: 4f33ddb4 ("libbpf: Propagate EPERM to caller on program load") Signed-off-by:
Alex Gartrell <alexgartrell@gmail.com> Signed-off-by:
-
Alexei Starovoitov authored
Udip Pant says: ==================== This patch series adds changes in verifier to make decisions such as granting of read / write access or enforcement of return code status based on the program type of the target program while using dynamic program extension (of type BPF_PROG_TYPE_EXT). The BPF_PROG_TYPE_EXT type can be used to extend types such as XDP, SKB and others. Since the BPF_PROG_TYPE_EXT program type on itself is just a placeholder for those, we need this extended check for those extended programs to actually work with proper access, while using this option. Patch #1 includes changes in the verifier. Patch #2 adds selftests to verify write access on a packet for a valid extension program type Patch #3 adds selftests to verify proper check for the return code Patch #4 adds selftests to ensure access permissions and restrictions for some map types such sockmap. Changelogs: v2 -> v3: * more comprehensive resolution of the program type in the verifier based on the target program (and not just for the packet access) * selftests for checking return code and map access * Also moved this patch to 'bpf-next' from 'bpf' tree v1 -> v2: * extraction of the logic to resolve prog type into a separate method * selftests to check for packet access for a valid freplace prog ==================== Acked-by:Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Udip Pant authored
This adds further tests to ensure access permissions and restrictions are applied properly for some map types such as sock-map. It also adds another negative tests to assert static functions cannot be replaced. In the 'unreliable' mode it still fails with error 'tracing progs cannot use bpf_spin_lock yet' with the change in the verifier Signed-off-by:
Udip Pant <udippant@fb.com> Signed-off-by:
-
Udip Pant authored
This adds test to enforce same check for the return code for the extended prog as it is enforced for the target program. It asserts failure for a return code, which is permitted without the patch in this series, while it is restricted after the application of this patch. Signed-off-by:
-
Udip Pant authored
This adds a selftest that tests the behavior when a freplace target program attempts to make a write access on a packet. The expectation is that the read or write access is granted based on the program type of the linked program and not itself (which is of type, for e.g., BPF_PROG_TYPE_EXT). This test fails without the associated patch on the verifier. Signed-off-by:
-
Udip Pant authored
This patch adds changes in verifier to make decisions such as granting of read / write access or enforcement of return code status based on the program type of the target program while using dynamic program extension (of type BPF_PROG_TYPE_EXT). The BPF_PROG_TYPE_EXT type can be used to extend types such as XDP, SKB and others. Since the BPF_PROG_TYPE_EXT program type on itself is just a placeholder for those, we need this extended check for those extended programs to actually work with proper access, while using this option. Specifically, it introduces following changes: - may_access_direct_pkt_data: allow access to packet data based on the target prog - check_return_code: enforce return code based on the target prog (currently, this check is skipped for EXT program) - check_ld_abs: check for 'may_access_skb' based on the target prog - check_map_prog_compatibility: enforce the map compatibility check based on the target prog - may_update_sockmap: allow sockmap update based on the target prog Some other occurrences of prog->type is left as it without replacing with the 'resolved' type: - do_check_common() and check_attach_btf_id(): already have specific logic to handle the EXT prog type - jit_subprogs() and bpf_check(): Not changed for jit compilation or while inferring env->ops Next few patches in this series include selftests for some of these cases. Signed-off-by: -
Colin Ian King authored
There is a spelling mistake in a check error message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Jiri Olsa authored
Alexei reported compile breakage on newer systems with following error: In file included from /usr/include/fcntl.h:290:0, 4814 from ./test_progs.h:29, 4815 from .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:3: 4816In function ‘open’, 4817 inlined from ‘trigger_fstat_events’ at .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:50:10, 4818 inlined from ‘test_d_path’ at .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:119:6: 4819/usr/include/x86_64-linux-gnu/bits/fcntl2.h:50:4: error: call to ‘__open_missing_mode’ declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments 4820 __open_missing_mode (); 4821 ^~~~~~~~~~~~~~~~~~~~~~ We're missing permission bits as 3rd argument for open call with O_CREAT flag specified. Fixes: e4d1af4b ("selftests/bpf: Add test for d_path helper") Reported-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
- 25 Aug, 2020 5 commits
-
-
Jiri Olsa authored
Adding test to for sets resolve_btfids. We're checking that testing set gets properly resolved and sorted. Signed-off-by:
-
Jiri Olsa authored
Adding test for d_path helper which is pretty much copied from Wenbo Zhang's test for bpf_get_fd_path, which never made it in. The test is doing fstat/close on several fd types, and verifies we got the d_path helper working on kernel probes for vfs_getattr/filp_close functions. Original-patch-by:
Wenbo Zhang <ethercflow@gmail.com> Signed-off-by:
-
Jiri Olsa authored
Adding verifier test for attaching tracing program and calling d_path helper from within and testing that it's allowed for dentry_open function and denied for 'd_path' function with appropriate error. Signed-off-by:
-
Jiri Olsa authored
Updating btf.rst doc with info about BTF_SET_START/END macros. Signed-off-by:
-
Jiri Olsa authored
Adding d_path helper function that returns full path for given 'struct path' object, which needs to be the kernel BTF 'path' object. The path is returned in buffer provided 'buf' of size 'sz' and is zero terminated. bpf_d_path(&file->f_path, buf, size); The helper calls directly d_path function, so there's only limited set of function it can be called from. Adding just very modest set for the start. Updating also bpf.h tools uapi header and adding 'path' to bpf_helpers_doc.py script. Signed-off-by:
-
