- 19 Mar, 2019 10 commits
-
-
Eric Dumazet authored
[ Upstream commit 95d6ebd5 ] In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaohe Lin authored
[ Upstream commit a843dc4e ] In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to 32,so UBSAN complain about it. UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 ubsan_epilogue+0xe/0x81 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425 check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781 try_6rd net/ipv6/sit.c:806 [inline] ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline] sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033 __netdev_start_xmit include/linux/netdevice.h:4300 [inline] netdev_start_xmit include/linux/netdevice.h:4309 [inline] xmit_one net/core/dev.c:3243 [inline] dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259 __dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829 neigh_output include/net/neighbour.h:501 [inline] ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120 ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176 ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697 ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717 rawv6_push_pending_frames net/ipv6/raw.c:616 [inline] rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946 inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xc8/0x110 net/socket.c:631 ___sys_sendmsg+0x6cf/0x890 net/socket.c:2114 __sys_sendmsg+0xf0/0x1b0 net/socket.c:2152 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
linmiaohe <linmiaohe@huawei.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1e027960 ] syzbot found another add_timer() issue, this time in net/hsr [1] Let's use mod_timer() which is safe. [1] kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 kobject: 'loop2' (00000000f5629718): kobject_uevent_env RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134 Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9 RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246 kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2' RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000 RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8 RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30 FS: 00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: hsr_check_announce net/hsr/hsr_device.c:99 [inline] hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] dev_open net/core/dev.c:1436 [inline] dev_open+0x143/0x160 net/core/dev.c:1424 team_port_add drivers/net/team/team.c:1203 [inline] team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933 do_set_master net/core/rtnetlink.c:2358 [inline] do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1869 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4 R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit 6caabe7f ] If hsr_add_port(hsr, hsr_dev, HSR_PT_MASTER) failed to add port, it directly returns res and forgets to free the node that allocated in hsr_create_self_node(), and forgets to delete the node->mac_list linked in hsr->self_node_db. BUG: memory leak unreferenced object 0xffff8881cfa0c780 (size 64): comm "syz-executor.0", pid 2077, jiffies 4294717969 (age 2415.377s) hex dump (first 32 bytes): e0 c7 a0 cf 81 88 ff ff 00 02 00 00 00 00 ad de ................ 00 e6 49 cd 81 88 ff ff c0 9b 87 d0 81 88 ff ff ..I............. backtrace: [<00000000e2ff5070>] hsr_dev_finalize+0x736/0x960 [hsr] [<000000003ed2e597>] hsr_newlink+0x2b2/0x3e0 [hsr] [<000000003fa8c6b6>] __rtnl_newlink+0xf1f/0x1600 net/core/rtnetlink.c:3182 [<000000001247a7ad>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3240 [<00000000e7d1b61d>] rtnetlink_rcv_msg+0x54e/0xb90 net/core/rtnetlink.c:5130 [<000000005556bd3a>] netlink_rcv_skb+0x129/0x340 net/netlink/af_netlink.c:2477 [<00000000741d5ee6>] netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] [<00000000741d5ee6>] netlink_unicast+0x49a/0x650 net/netlink/af_netlink.c:1336 [<000000009d56f9b7>] netlink_sendmsg+0x88b/0xdf0 net/netlink/af_netlink.c:1917 [<0000000046b35c59>] sock_sendmsg_nosec net/socket.c:621 [inline] [<0000000046b35c59>] sock_sendmsg+0xc3/0x100 net/socket.c:631 [<00000000d208adc9>] __sys_sendto+0x33e/0x560 net/socket.c:1786 [<00000000b582837a>] __do_sys_sendto net/socket.c:1798 [inline] [<00000000b582837a>] __se_sys_sendto net/socket.c:1794 [inline] [<00000000b582837a>] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:1794 [<00000000c866801d>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 [<00000000fea382d9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e01dacb3>] 0xffffffffffffffff Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Bryan Whitehead authored
[ Upstream commit deb6bfab ] It has been observed that tx queue may stall while downloading from certain web sites (example www.speedtest.net) The cause has been tracked down to a corner case where the tx interrupt vector was disabled automatically, but was not re enabled later. The lan743x has two mechanisms to enable/disable individual interrupts. Interrupts can be enabled/disabled by individual source, and they can also be enabled/disabled by individual vector which has been mapped to the source. Both must be enabled for interrupts to work properly. The TX code path, primarily uses the interrupt enable/disable of the TX source bit, while leaving the vector enabled all the time. However, while investigating this issue it was noticed that the driver requested the use of the vector auto clear feature. The test above revealed a case where the vector enable was cleared unintentionally. This patch fixes the issue by deleting the lines that request the vector auto clear feature to be used. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by:
-
Bryan Whitehead authored
[ Upstream commit dd9d9f59 ] It has been noticed that running the speed test at www.speedtest.net occasionally causes a kernel panic. Investigation revealed that under this test RX buffer allocation sometimes fails and returns NULL. But the lan743x driver did not handle this case. This patch fixes this issue by attempting to allocate a buffer before sending the new rx packet to the OS. If the allocation fails then the new rx packet is dropped and the existing buffer is reused in the DMA ring. Updates for v2: Additional 2 locations where allocation was not checked, has been changed to reuse existing buffer. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 163d1c3d ] Back in 2013 Hannes took care of most of such leaks in commit bceaa902 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") But the bug in l2tp_ip6_recvmsg() has not been fixed. syzbot report : BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600 kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32 copy_to_user include/linux/uaccess.h:174 [inline] move_addr_to_user+0x311/0x570 net/socket.c:227 ___sys_recvmsg+0xb65/0x1310 net/socket.c:2283 do_recvmmsg+0x646/0x10c0 net/socket.c:2390 __sys_recvmmsg net/socket.c:2469 [inline] __do_sys_recvmmsg net/socket.c:2492 [inline] __se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x445819 Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819 RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003 RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xf6/0x1310 net/socket.c:2244 do_recvmmsg+0x646/0x10c0 net/socket.c:2390 Bytes 0-31 of 32 are uninitialized Memory access of size 32 starts at ffff8880ae62fbb0 Data copied to user address 0000000020000000 Fixes: a32e0eec ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 22c74764 ] If a non local multicast packet reaches ip_route_input_rcu() while the ingress device IPv4 private data (in_dev) is NULL, we end up doing a NULL pointer dereference in IN_DEV_MFORWARD(). Since the later call to ip_route_input_mc() is going to fail if !in_dev, we can fail early in such scenario and avoid the dangerous code path. v1 -> v2: - clarified the commit message, no code changes Reported-by:
Tianhao Zhao <tizhao@redhat.com> Fixes: e58e4159 ("net: Enable support for VRF with ipv4 multicast") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2a5ff07a ] We keep receiving syzbot reports [1] that show that tunnels do not play the rcu/IFF_UP rules properly. At device dismantle phase, gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. This means that IFF_UP needs to be tested before queueing packets into netif_rx() or gro_cells. This patch implements the test in gro_cells_receive() because too many callers do not seem to bother enough. [1] BUG: unable to handle kernel paging request at fffff4ca0b9ffffe PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Call Trace: kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2' ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173 worker_thread+0x98/0xe40 kernel/workqueue.c:2319 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: CR2: fffff4ca0b9ffffe [ end trace 513fc9c1338d1cb3 ] RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Fixes: c9e6bc64 ("net: add gro_cells infrastructure") Signed-off-by:
-
Li RongQing authored
[ Upstream commit 6d2b0f02 ] proc_exit_connector() uses ->real_parent lockless. This is not safe that its parent can go away at any moment, so use RCU to protect it, and ensure that this task is not released. [ 747.624551] ================================================================== [ 747.632946] BUG: KASAN: use-after-free in proc_exit_connector+0x1f7/0x310 [ 747.640686] Read of size 4 at addr ffff88a0276988e0 by task sshd/2882 [ 747.648032] [ 747.649804] CPU: 11 PID: 2882 Comm: sshd Tainted: G E 4.19.26-rc2 #11 [ 747.658629] Hardware name: IBM x3550M4 -[7914OFV]-/00AM544, BIOS -[D7E142BUS-1.71]- 07/31/2014 [ 747.668419] Call Trace: [ 747.671269] dump_stack+0xf0/0x19b [ 747.675186] ? show_regs_print_info+0x5/0x5 [ 747.679988] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 747.685302] print_address_description+0x6a/0x270 [ 747.691162] kasan_report+0x258/0x380 [ 747.695835] ? proc_exit_connector+0x1f7/0x310 [ 747.701402] proc_exit_connector+0x1f7/0x310 [ 747.706767] ? proc_coredump_connector+0x2d0/0x2d0 [ 747.712715] ? _raw_write_unlock_irq+0x29/0x50 [ 747.718270] ? _raw_write_unlock_irq+0x29/0x50 [ 747.723820] ? ___preempt_schedule+0x16/0x18 [ 747.729193] ? ___preempt_schedule+0x16/0x18 [ 747.734574] do_exit+0xa11/0x14f0 [ 747.738880] ? mm_update_next_owner+0x590/0x590 [ 747.744525] ? debug_show_all_locks+0x3c0/0x3c0 [ 747.761448] ? ktime_get_coarse_real_ts64+0xeb/0x1c0 [ 747.767589] ? lockdep_hardirqs_on+0x1a6/0x290 [ 747.773154] ? check_chain_key+0x139/0x1f0 [ 747.778345] ? check_flags.part.35+0x240/0x240 [ 747.783908] ? __lock_acquire+0x2300/0x2300 [ 747.789171] ? _raw_spin_unlock_irqrestore+0x59/0x70 [ 747.795316] ? _raw_spin_unlock_irqrestore+0x59/0x70 [ 747.801457] ? do_raw_spin_unlock+0x10f/0x1e0 [ 747.806914] ? do_raw_spin_trylock+0x120/0x120 [ 747.812481] ? preempt_count_sub+0x14/0xc0 [ 747.817645] ? _raw_spin_unlock+0x2e/0x50 [ 747.822708] ? __handle_mm_fault+0x12db/0x1fa0 [ 747.828367] ? __pmd_alloc+0x2d0/0x2d0 [ 747.833143] ? check_noncircular+0x50/0x50 [ 747.838309] ? match_held_lock+0x7f/0x340 [ 747.843380] ? check_noncircular+0x50/0x50 [ 747.848561] ? handle_mm_fault+0x21a/0x5f0 [ 747.853730] ? check_flags.part.35+0x240/0x240 [ 747.859290] ? check_chain_key+0x139/0x1f0 [ 747.864474] ? __do_page_fault+0x40f/0x760 [ 747.869655] ? __audit_syscall_entry+0x4b/0x1f0 [ 747.875319] ? syscall_trace_enter+0x1d5/0x7b0 [ 747.880877] ? trace_raw_output_preemptirq_template+0x90/0x90 [ 747.887895] ? trace_raw_output_sys_exit+0x80/0x80 [ 747.893860] ? up_read+0x3b/0x90 [ 747.898142] ? stop_critical_timings+0x260/0x260 [ 747.903909] do_group_exit+0xe0/0x1c0 [ 747.908591] ? __x64_sys_exit+0x30/0x30 [ 747.913460] ? trace_raw_output_preemptirq_template+0x90/0x90 [ 747.920485] ? tracer_hardirqs_on+0x270/0x270 [ 747.925956] __x64_sys_exit_group+0x28/0x30 [ 747.931214] do_syscall_64+0x117/0x400 [ 747.935988] ? syscall_return_slowpath+0x2f0/0x2f0 [ 747.941931] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 747.947788] ? trace_hardirqs_on_caller+0x1d0/0x1d0 [ 747.953838] ? lockdep_sys_exit+0x16/0x8e [ 747.958915] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 747.964784] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 747.971021] RIP: 0033:0x7f572f154c68 [ 747.975606] Code: Bad RIP value. [ 747.979791] RSP: 002b:00007ffed2dfaa58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 747.989324] RAX: ffffffffffffffda RBX: 00007f572f431840 RCX: 00007f572f154c68 [ 747.997910] RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 [ 748.006495] RBP: 0000000000000001 R08: 00000000000000e7 R09: fffffffffffffee0 [ 748.015079] R10: 00007f572f4387e8 R11: 0000000000000246 R12: 00007f572f431840 [ 748.023664] R13: 000055a7f90f2c50 R14: 000055a7f96e2310 R15: 000055a7f96e2310 [ 748.032287] [ 748.034509] Allocated by task 2300: [ 748.038982] kasan_kmalloc+0xa0/0xd0 [ 748.043562] kmem_cache_alloc_node+0xf5/0x2e0 [ 748.049018] copy_process+0x1781/0x4790 [ 748.053884] _do_fork+0x166/0x9a0 [ 748.058163] do_syscall_64+0x117/0x400 [ 748.062943] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 748.069180] [ 748.071405] Freed by task 15395: [ 748.075591] __kasan_slab_free+0x130/0x180 [ 748.080752] kmem_cache_free+0xc2/0x310 [ 748.085619] free_task+0xea/0x130 [ 748.089901] __put_task_struct+0x177/0x230 [ 748.095063] finish_task_switch+0x51b/0x5d0 [ 748.100315] __schedule+0x506/0xfa0 [ 748.104791] schedule+0xca/0x260 [ 748.108978] futex_wait_queue_me+0x27e/0x420 [ 748.114333] futex_wait+0x251/0x550 [ 748.118814] do_futex+0x75b/0xf80 [ 748.123097] __x64_sys_futex+0x231/0x2a0 [ 748.128065] do_syscall_64+0x117/0x400 [ 748.132835] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 748.139066] [ 748.141289] The buggy address belongs to the object at ffff88a027698000 [ 748.141289] which belongs to the cache task_struct of size 12160 [ 748.156589] The buggy address is located 2272 bytes inside of [ 748.156589] 12160-byte region [ffff88a027698000, ffff88a02769af80) [ 748.171114] The buggy address belongs to the page: [ 748.177055] page:ffffea00809da600 count:1 mapcount:0 mapping:ffff888107d01e00 index:0x0 compound_mapcount: 0 [ 748.189136] flags: 0x57ffffc0008100(slab|head) [ 748.194688] raw: 0057ffffc0008100 ffffea00809a3200 0000000300000003 ffff888107d01e00 [ 748.204424] raw: 0000000000000000 0000000000020002 00000001ffffffff 0000000000000000 [ 748.214146] page dumped because: kasan: bad access detected [ 748.220976] [ 748.223197] Memory state around the buggy address: [ 748.229128] ffff88a027698780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.238271] ffff88a027698800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.247414] >ffff88a027698880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.256564] ^ [ 748.264267] ffff88a027698900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.273493] ffff88a027698980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 748.282630] ================================================================== Fixes: b086ff87 ("connector: add parent pid and tgid to coredump and exit events") Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
- 13 Mar, 2019 30 commits
-
-
Greg Kroah-Hartman authored
-
Peter Zijlstra (Intel) authored
commit 400816f6 upstream Skylake (and later) will receive a microcode update to address a TSX errata. This microcode will, on execution of a TSX instruction (speculative or not) use (clobber) PMC3. This update will also provide a new MSR to change this behaviour along with a CPUID bit to enumerate the presence of this new MSR. When the MSR gets set; the microcode will no longer use PMC3 but will Force Abort every TSX transaction (upon executing COMMIT). When TSX Force Abort (TFA) is allowed (default); the MSR gets set when PMC3 gets scheduled and cleared when, after scheduling, PMC3 is unused. When TFA is not allowed; clear PMC3 from all constraints such that it will not get used. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Peter Zijlstra (Intel) authored
commit 52f64909 upstream Skylake systems will receive a microcode update to address a TSX errata. This microcode will (by default) clobber PMC3 when TSX instructions are (speculatively or not) executed. It also provides an MSR to cause all TSX transaction to abort and preserve PMC3. Add the CPUID enumeration and MSR definition. Signed-off-by:
-
Peter Zijlstra (Intel) authored
commit 11f8b2d6 upstream Such that we can re-use it. Signed-off-by:
-
Peter Zijlstra (Intel) authored
commit d01b1f96 upstream The cpuc data structure allocation is different between fake and real cpuc's; use the same code to init/free both. Signed-off-by:
-
Geert Uytterhoeven authored
commit 376991db upstream. When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS (R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for device pass-through for virtualization: echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind the kernel crashes with: Unable to handle kernel paging request at virtual address ffffffbf029ffffc Mem abort info: ESR = 0x96000006 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c [ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287 Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) pstate: 60400005 (nZCv daif +PAN -UAO) pc : __free_pages+0x8/0x58 lr : __dma_direct_free_pages+0x50/0x5c sp : ffffff801268baa0 x29: ffffff801268baa0 x28: 0000000000000000 x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0 x25: ffffffc6f9c60810 x24: 0000000000000000 x23: 00000000fffff000 x22: ffffff8012145000 x21: 0000000000000800 x20: ffffffbf029fffc8 x19: 0000000000000000 x18: ffffffc6f86c42c8 x17: 0000000000000000 x16: 0000000000000070 x15: 0000000000000003 x14: 0000000000000000 x13: ffffff801103d7f8 x12: 0000000000000028 x11: ffffff8011117604 x10: 0000000000009ad8 x9 : ffffff80110126d0 x8 : ffffffc6f7563000 x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018 x5 : ffffff8011cf3cc8 x4 : 0000000000004000 x3 : 0000000000080000 x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffffbf029fffc8 Process bash (pid: 1098, stack limit = 0x00000000c38e3e32) Call trace: __free_pages+0x8/0x58 __dma_direct_free_pages+0x50/0x5c arch_dma_free+0x1c/0x98 dma_direct_free+0x14/0x24 dma_free_attrs+0x9c/0xdc dmam_release+0x18/0x20 release_nodes+0x25c/0x28c devres_release_all+0x48/0x4c device_release_driver_internal+0x184/0x1f0 device_release_driver+0x14/0x1c unbind_store+0x70/0xb8 drv_attr_store+0x24/0x34 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x154/0x1c4 __vfs_write+0x34/0x164 vfs_write+0xb4/0x16c ksys_write+0x5c/0xbc __arm64_sys_write+0x14/0x1c el0_svc_common+0x98/0x114 el0_svc_handler+0x1c/0x24 el0_svc+0x8/0xc Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404) ---[ end trace 8c564cdd3a1a840f ]--- While I've bisected this to commit e8e683ae ("iommu/of: Fix probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels does fix the problem, this turned out to be a red herring. On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL. Hence if a driver has used a managed DMA allocation API, the allocated DMA memory will be freed using the direct DMA ops, while it may have been allocated using a custom DMA ops (iommu_dma_ops in this case). Fix this by reversing the order of the calls to devres_release_all() and arch_teardown_dma_ops(). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> [rm: backport for 4.12-4.19 - kernels before 5.0 will not see the crash above, but may get silent memory corruption instead] Signed-off-by:
-
Daniel F. Dickinson authored
commit ce938231 upstream. ath9k_of_init() function[0] was initially written on the assumption that if someone had an explicit ath9k OF node that "there must be something wrong, why would someone add an OF node if everything is fine"[1] (Quoting Martin Blumenstingl <martin.blumenstingl@googlemail.com>) "it turns out it's not that simple. with your requirements I'm now aware of two use-cases where the current code in ath9k_of_init() doesn't work without modifications"[1] The "your requirements" Martin speaks of is the result of the fact that I have a device (PowerCloud Systems CR5000) has some kind of default - not unique mac address - set and requires to set the correct MAC address via mac-address devicetree property, however: "some cards come with a physical EEPROM chip [or OTP] so "qca,no-eeprom" should not be set (your use-case). in this case AH_USE_EEPROM should be set (which is the default when there is no OF node)"[1] The other use case is: the firmware on some PowerMac G5 seems to add a OF node for the ath9k card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP should be unset (which is the default when there is no OF node). see [3] After this patch to ath9k_of_init() the new behavior will be: if there's no OF node then everything is the same as before if there's an empty OF node then ath9k will use the hardware EEPROM (before ath9k would fail to initialize because no EEPROM data was provided by userspace) if there's an OF node with only a MAC address then ath9k will use the MAC address and the hardware EEPROM (see the case above) with "qca,no-eeprom" EEPROM data from userspace will be requested. the behavior here will not change [1] Martin provides additional background on EEPROM swapping[1]. Thanks to Christian Lamparter <chunkeey@gmail.com> for all his help on troubleshooting this issue and the basis for this patch. [0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615 [1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058 [2]https://github.com/openwrt/openwrt/pull/1613 [3]https://patchwork.kernel.org/patch/10241731/ Fixes: 138b4125 ("ath9k: parse the device configuration from an OF node") Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by:
Daniel F. Dickinson <cshored@thecshore.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Ronnie Sahlberg authored
commit 32a1fb36 upstream. Change these free functions to allow passing NULL as the argument and treat it as a no-op just like free(NULL) would. Or, if rqst->rq_iov is NULL. The second scenario could happen for smb2_queryfs() if the call to SMB2_query_info_init() fails and we go to qfs_exit to clean up and free all resources. In that case we have not yet assigned rqst[2].rq_iov and thus the rq_iov dereference in SMB2_close_free() will cause a NULL pointer dereference. [ bp: upstream patch also fixes SMB2_set_info_free which was introduced in 4.20 ] Fixes: 1eb9fb52 ("cifs: create SMB2_open_init()/SMB2_open_free() helpers") Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Gao Xiang authored
commit 419d6efc upstream. As Al pointed out, " ... and while we are at it, what happens to unsigned int nameoff = le16_to_cpu(de[mid].nameoff); unsigned int matched = min(startprfx, endprfx); struct qstr dname = QSTR_INIT(data + nameoff, unlikely(mid >= ndirents - 1) ? maxsize - nameoff : le16_to_cpu(de[mid + 1].nameoff) - nameoff); /* string comparison without already matched prefix */ int ret = dirnamecmp(name, &dname, &matched); if le16_to_cpu(de[...].nameoff) is not monotonically increasing? I.e. what's to prevent e.g. (unsigned)-1 ending up in dname.len? Corrupted fs image shouldn't oops the kernel.. " Revisit the related lookup flow to address the issue. Fixes: d72d1ce6 ("staging: erofs: add namei functions") Cc: <stable@vger.kernel.org> # 4.19+ Suggested-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Gao Xiang authored
commit 62dc4597 upstream. In real scenario, there could be several threads accessing xattrs of the same xattr-uninitialized inode, and init_inode_xattrs() almost at the same time. That's actually an unexpected behavior, this patch closes the race. Fixes: b17500a0 ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Gao Xiang authored
From: Sheng Yong <shengyong1@huawei.com> commit 3b1b5291 upstream. If it fails to read a shared xattr page, the inode's shared xattr array is not freed. The next time the inode's xattr is accessed, the previously allocated array is leaked. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Fixes: b17500a0 ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by:
-
Gao Xiang authored
commit 7077fffc upstream. Currently, this will hit a BUG_ON for these symlinks as follows: - kernel message ------------[ cut here ]------------ kernel BUG at drivers/staging/erofs/xattr.c:59! SMP PTI CPU: 1 PID: 1170 Comm: getllxattr Not tainted 4.20.0-rc6+ #92 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 RIP: 0010:init_inode_xattrs+0x22b/0x270 Code: 48 0f 45 ea f0 ff 4d 34 74 0d 41 83 4c 24 e0 01 31 c0 e9 00 fe ff ff 48 89 ef e8 e0 31 9e ff eb e9 89 e8 e9 ef fd ff ff 0f 0$ <0f> 0b 48 89 ef e8 fb f6 9c ff 48 8b 45 08 a8 01 75 24 f0 ff 4d 34 RSP: 0018:ffffa03ac026bdf8 EFLAGS: 00010246 ------------[ cut here ]------------ ... Call Trace: erofs_listxattr+0x30/0x2c0 ? selinux_inode_listxattr+0x5a/0x80 ? kmem_cache_alloc+0x33/0x170 ? security_inode_listxattr+0x27/0x40 listxattr+0xaf/0xc0 path_listxattr+0x5a/0xa0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... ---[ end trace 3c24b49408dc0c72 ]--- Fix it by checking ->xattr_isize in init_inode_xattrs(), and it also fixes improper return value -ENOTSUPP (it should be -ENODATA if xattr is enabled) for those inodes. Fixes: b17500a0 ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reported-by:
Li Guifu <bluce.liguifu@huawei.com> Tested-by:
-
Gao Xiang authored
commit cadf1ccf upstream. This patch enhances the missing error handling code for xattr submodule, which improves the stability for the rare cases. Reviewed-by:
-
Andreas Gruenbacher authored
commit 605b0487 upstream. Mark Syms has reported seeing tasks that are stuck waiting in find_insert_glock. It turns out that struct lm_lockname contains four padding bytes on 64-bit architectures that function glock_waitqueue doesn't skip when hashing the glock name. As a result, we can end up waking up the wrong waitqueue, and the waiting tasks may be stuck forever. Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for the key length. Reported-by:
Mark Syms <mark.syms@citrix.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 18c0ab87 ] checkentry(tee_tg_check) should initialize priv->oif from dev if possible. But only netdevice notifier handler can set that. Hence priv->oif is always -1 until notifier handler is called. Fixes: 9e2f6c5d ("netfilter: Rework xt_TEE netdevice notifier") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit f24d2d4f ] TEE netdevice notifier handler checks only interface name. however each netns can have same interface name. hence other netns's interface could be selected. test commands: %ip netns add vm1 %iptables -I INPUT -p icmp -j TEE --gateway 192.168.1.1 --oif enp2s0 %ip link set enp2s0 netns vm1 Above rule is in the root netns. but that rule could get enp2s0 ifindex of vm1 by notifier handler. After this patch, TEE rule is added to the per-netns list. Fixes: 9e2f6c5d ("netfilter: Rework xt_TEE netdevice notifier") Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit e02f5c1b ] The DRM driver stack is designed to work with cache coherent devices only, but permits an optimization to be enabled in some cases, where for some buffers, both the CPU and the GPU use uncached mappings, removing the need for DMA snooping and allocation in the CPU caches. The use of uncached GPU mappings relies on the correct implementation of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU will use cached mappings nonetheless. On x86 platforms, this does not seem to matter, as uncached CPU mappings will snoop the caches in any case. However, on ARM and arm64, enabling this optimization on a platform where NoSnoop is ignored results in loss of coherency, which breaks correct operation of the device. Since we have no way of detecting whether NoSnoop works or not, just disable this optimization entirely for ARM and arm64. Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Zhou <David1.Zhou@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Junwei Zhang <Jerry.Zhang@amd.com> Cc: Michel Daenzer <michel.daenzer@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: amd-gfx list <amd-gfx@lists.freedesktop.org> Cc: dri-devel <dri-devel@lists.freedesktop.org> Reported-by:
Carsten Haitzler <Carsten.Haitzler@arm.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.kernel.org/patch/10778815/Signed-off-by:
-
Marek Szyprowski authored
commit a3238924 upstream. The maximum voltage value for buck8 regulator on Odroid XU3/XU4 boards is set too low. Increase it to the 2000mV as specified on the board schematic. So far the board worked fine, because of the bug in the PMIC driver, which used incorrect step value for that regulator. It interpreted the voltage value set by the bootloader as 1225mV and kept it unchanged. The regulator driver has been however fixed recently in the commit 56b5d4ea ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35"), what results in reading the proper buck8 value and forcing it to 1500mV on boot. This is not enough for proper board operation and results in eMMC errors during heavy IO traffic. Increasing maximum voltage value for buck8 restores original driver behavior and fixes eMMC issues. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 86a2d2ac ("ARM: dts: Add dts file for Odroid XU3 board") Fixes: 56b5d4ea ("regulator: s2mps11: Fix steps for buck7, buck8 and LDO35") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Marek Szyprowski authored
commit a66352e0 upstream. Add minimal parameters needed by the Exynos CLKOUT driver to Exynos3250 PMU node. This fixes the following warning on boot: exynos_clkout_init: failed to register clkout clock Fixes: d19bb397 ("ARM: dts: exynos: Update PMU node with CLKOUT related data") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marek Szyprowski authored
commit ec33745b upstream. Commit 225da7e6 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") added MMC power sequence for eMMC card of Odroid X2/U3. It reused generic sd1_cd pin control configuration node and only disabled pull-up. However that time the pinctrl configuration was not applied during MMC power sequence driver initialization. This has been changed later by commit d97a1e5d ("mmc: pwrseq: convert to proper platform device"). It turned out then, that the provided pinctrl configuration is not correct, because the eMMC_RTSN line is being re-configured as 'special function/card detect function for mmc1 controller' not the simple 'output', thus the power sequence driver doesn't really set the pin value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this by providing separate node with eMMC_RTSN pin configuration. Cc: <stable@vger.kernel.org> Reported-by:
Markus Reichl <m.reichl@fivetechno.de> Suggested-by:
Ulf Hansson <ulf.hansson@linaro.org> Fixes: 225da7e6 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common") Signed-off-by:
-
Alistair Strachan authored
commit 8d26c139 upstream. This reverts commit abd7d097. This change was already partially reverted by John Stultz in commit 9c6d26df ("arm64: dts: hikey: Fix eMMC corruption regression"). This change appears to cause controller resets and block read failures which prevents successful booting on some hikey boards. Cc: Ryan Grachek <ryan@edited.us> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: stable <stable@vger.kernel.org> #4.17+ Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
Jan Kiszka authored
commit 83b94417 upstream. Somewhere along recent changes to power control of the wl1835, power-on became very unreliable on the hikey, failing like this: wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16 After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, the hikey would already be happy with 1 ms. Still, we use the safer 10 ms, like on the Ultra96. Fixes: ea452678 ("arm64: dts: hikey: Fix WiFi support") Cc: <stable@vger.kernel.org> #4.12+ Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Acked-by:
-
Jan Kiszka authored
commit 35a4f89c upstream. Somewhere along recent changes to power control of the wl1831, power-on became very unreliable on the Ultra96, failing like this: wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16 After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, Ultra96 is already happy with 10 ms. Fixes: 5869ba06 ("arm64: zynqmp: Add support for Xilinx zcu100-revC") Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Alexander Shishkin authored
commit 2e095ce7 upstream. On Denverton's integration of the Intel(R) Trace Hub (for a reference and overview see Documentation/trace/intel_th.rst) the reported size of one of its resources (RTIT_BAR) doesn't match its actual size, which leads to overlaps with other devices' resources. In practice, it overlaps with XHCI MMIO space, which results in the xhci driver bailing out after seeing its registers as 0xffffffff, and perceived disappearance of all USB devices: intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006) xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead xhci_hcd 0000:00:15.0: HC died; cleaning up usb 1-1: USB disconnect, device number 2 For this reason, we need to resize the RTIT_BAR on Denverton to its actual size, which in this case is 4MB. The corresponding erratum is DNV36 at the link below: DNV36. Processor Host Root Complex May Incorrectly Route Memory Accesses to Intel
® Trace Hub Problem: The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is reported as a 2KB memory range. Due to this erratum, the processor Host Root Complex will forward addresses from RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub. Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1 space may not function correctly. Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum. Status: No Fix. Note that 5118ccd3 ("intel_th: pci: Add Denverton SOC support") updates the Trace Hub driver so it claims the Denverton device, but the resource overlap exists regardless of whether that driver is loaded or that commit is included. Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c3000-family-spec-update.pdfSigned-off-by:Alexander Shishkin <alexander.shishkin@linux.intel.com> [bhelgaas: include erratum text, clarify relationship with 5118ccd3] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
commit 5e420fe6 upstream. Add missing break statement and fix identation issue. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 9cb62fa2 ("aacraid: Log firmware AIF messages") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit df997abe upstream. Add missing break statement in order to prevent the code from falling through to case ISCSI_BOOT_TGT_NAME, which is unnecessary. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: b33a84a3 ("ibft: convert iscsi_ibft module to iscsi boot lib") Cc: stable@vger.kernel.org Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Vincent Batts authored
commit e154ab69 upstream. Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad. Signed-off-by:
Vincent Batts <vbatts@hashbangbash.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jason Gerecke authored
commit 44fc95e2 upstream. Tablet initially begins communicating at 9600 baud, so this command should be used to connect to the device: $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0 https://github.com/linuxwacom/xf86-input-wacom/issues/40Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Keith Busch authored
[ Upstream commit 4726bcf3 ] The reset work holds a mutex to prevent races with removal modifying the same resources, but was unlocking only on success. Unlock on failure too. Fixes: 5c959d73 ("nvme-pci: fix rapid add remove sequence") Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 8c772a9b ] Our test reported the following stack, and vmcore showed that ->inflight counter is -1. [ffffc9003fcc38d0] __schedule at ffffffff8173d95d [ffffc9003fcc3958] schedule at ffffffff8173de26 [ffffc9003fcc3970] io_schedule at ffffffff810bb6b6 [ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb [ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3 [ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a [ffffc9003fcc3b08] generic_make_request at ffffffff81368b49 [ffffc9003fcc3b68] submit_bio at ffffffff81368d7d [ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4] [ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4] [ffffc9003fcc3d68] do_writepages at ffffffff811c49ae [ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188 [ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301 [ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4] [ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b [ffffc9003fcc3ee8] do_fsync at ffffffff81285abd [ffffc9003fcc3f18] sys_fsync at ffffffff81285d50 [ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04 [ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e The ->inflight counter may be negative (-1) if 1) blk-iolatency was disabled when the IO was issued, 2) blk-iolatency was enabled before this IO reached its endio, 3) the ->inflight counter is decreased from 0 to -1 in endio() In fact the hang can be easily reproduced by the below script, H=/sys/fs/cgroup/unified/ P=/sys/fs/cgroup/unified/test echo "+io" > $H/cgroup.subtree_control mkdir -p $P echo $$ > $P/cgroup.procs xfs_io -f -d -c "pwrite 0 4k" /dev/sdg echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency xfs_io -f -d -c "pwrite 0 4k" /dev/sdg This fixes the problem by freezing the queue so that while enabling/disabling iolatency, there is no inflight rq running. Note that quiesce_queue is not needed as this only updating iolatency configuration about which dispatching request_queue doesn't care. Signed-off-by:
Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
