- 25 Aug, 2011 14 commits
-
-
Rafael J. Wysocki authored
Since the PM clock management code in drivers/base/power/clock_ops.c is used for both runtime PM and system suspend/hibernation, the definitions of data structures and headers related to it should not be located in include/linux/pm_rumtime.h. Move them to a separate header file. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Currently pm_genpd_runtime_resume() has to walk the list of devices from the device's PM domain to find the corresponding device list object containing the need_restore field to check if the driver's .runtime_resume() callback should be executed for the device. This is suboptimal and can be simplified by using power.sybsys_data to store device information used by the generic PM domains code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Since the power.subsys_data device field will be used by multiple filesystems, introduce a reference counting mechanism for it to avoid freeing it prematurely or changing its value at a wrong time. Make the PM clocks management code that currently is the only user of power.subsys_data use the new reference counting. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Introduce struct pm_subsys_data that may be subclassed by subsystems to store subsystem-specific information related to the device. Move the clock management fields accessed through the power.subsys_data pointer in struct device to the new strucutre. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Instead of coding the undocumented dependencies between power domains A3RV and A4LC on SH7372 directly into the low-level power up/down routines, make A3RV be a subdomain of A4LC, which will cause the same dependecies to hold. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
-
Rafael J. Wysocki authored
Change the name of the second argument of pm_genpd_add_subdomain() so that it is (a) shorter and (b) in agreement with the name of the second argument of pm_genpd_add_subdomain(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Since it is now possible for a PM domain to have multiple masters instead of one parent, rename the "wait for parent" status to reflect the new situation. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Currently, for a given generic PM domain there may be only one parent domain (i.e. a PM domain it depends on). However, there is at least one real-life case in which there should be two parents (masters) for one PM domain (the A3RV domain on SH7372 turns out to depend on the A4LC domain and it depends on the A4R domain and the same time). For this reason, allow a PM domain to have multiple parents (masters) by introducing objects representing links between PM domains. The (logical) links between PM domains represent relationships in which one domain is a master (i.e. it is depended on) and another domain is a slave (i.e. it depends on the master) with the rule that the slave cannot be powered on if the master is not powered on and the master cannot be powered off if the slave is not powered off. Each struct generic_pm_domain object representing a PM domain has two lists of links, a list of links in which it is a master and a list of links in which it is a slave. The first of these lists replaces the list of subdomains and the second one is used in place of the parent pointer. Each link is represented by struct gpd_link object containing pointers to the master and the slave and two struct list_head members allowing it to hook into two lists (the master's list of "master" links and the slave's list of "slave" links). This allows the code to get to the link from each side (either from the master or from the slave) and follow it in each direction. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
The next patch will make it possible for a generic PM domain to have multiple parents (i.e. multiple PM domains it depends on). To prepare for that change it is necessary to change pm_genpd_poweron() so that it doesn't jump to the start label after running itself recursively for the parent domain. For this purpose, introduce a new PM domain status value GPD_STATE_WAIT_PARENT that will be set by pm_genpd_poweron() before calling itself recursively for the parent domain and modify the code in drivers/base/power/domain.c so that the GPD_STATE_WAIT_PARENT status is guaranteed to be preserved during the execution of pm_genpd_poweron() for the parent. This change also causes pm_genpd_add_subdomain() and pm_genpd_remove_subdomain() to wait for started pm_genpd_poweron() to complete and allows pm_genpd_runtime_resume() to avoid dropping the lock after powering on the PM domain. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
If pm_genpd_remove_subdomain() is called to remove a PM domain's subdomain and pm_genpd_poweron() is called for that subdomain at the same time, and the pm_genpd_poweron() called by it recursively for the parent returns an error, the first pm_genpd_poweron()'s error code path will attempt to decrement the subdomain counter of a PM domain that it's not a subdomain of any more. Rearrange the code in pm_genpd_poweron() to prevent this from happening. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
After the subdomain counter in struct generic_pm_domain has been changed into an atomic_t field, it is possible to modify pm_genpd_poweron() and pm_genpd_poweroff() so that they don't take the parents locks. This requires pm_genpd_poweron() to increment the parent's subdomain counter before calling itself recursively for the parent and to decrement it if an error is to be returned. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Currently, pm_genpd_poweron() and pm_genpd_poweroff() need to take the parent PM domain's lock in order to modify the parent's counter of active subdomains in a nonracy way. This causes the locking to be considerably complex and in fact is not necessary, because the subdomain counters may be implemented as atomic fields and they won't have to be modified under a lock. Replace the unsigned in sd_count field in struct generic_pm_domain by an atomic_t one and modify the code in drivers/base/power/domain.c to take this change into account. This patch doesn't change the locking yet, that is going to be done in a separate subsequent patch. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Kevin Hilman authored
Commit c03f007a (OMAP: PM: omap_device: add system PM methods for PM domain handling) mistakenly used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods for the PM domains noirq methods. Fix that by setting only the suspend_noirq and resume_noirq methods with custom versions. Note that all other PM domain methods (including the "normal" suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS, which configures them all to the default subsystem (platform_bus) methods. Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
The description of pm_runtime_irq_safe() has to be updated to follow the code after commit 02b26774 (PM / Runtime: Allow _put_sync() from interrupts-disabled context). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Kevin Hilman <khilman@ti.com>
-
- 24 Aug, 2011 11 commits
-
-
Magnus Damm authored
Associate the HDMI clock together with LCDC1 on sh7372. Without this patch Suspend-to-RAM hangs on the boards AP4EVB and Mackerel. The code hangs in the LCDC driver where the software is waiting forever for the hardware to power down. By explicitly associating the HDMI clock with LCDC1 we can make sure the HDMI clock is enabled using Runtime PM whenever the driver is accessing the hardware. This HDMI and LCDC1 dependency is documented in the sh7372 data sheet. Older kernels did work as expected but the recently merged (3.1-rc) 794d78fe drivers: sh: late disabling of clocks V2 introduced code to turn off clocks lacking software reference which happens to include the HDMI clock that is needed by LCDC1 to operate as expected. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Since sci_port_enable() and sci_port_disable() may be run with interrupts off and they execute pm_runtime_get_sync() and pm_runtime_put_sync(), respectively, the SCI device's power.irq_safe flag has to be set to indicate that it is safe to execute runtime PM callbacks for this device with interrupts off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
-
Rafael J. Wysocki authored
The lock member of struct pm_clk_data is of type struct mutex, which is a problem, because the suspend and resume routines defined in drivers/base/power/clock_ops.c cannot be executed with interrupts disabled for this reason. Modify struct pm_clk_data so that its lock member is a spinlock. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wiimote: Add status and return request handlers HID: wiimote: Add drm request HID: wiimote: Register led class devices HID: wiimote: Correctly call HID open/close callbacks HID: wiimote: Simplify synchronization HID: usbhid: Add support for SiGma Micro chip HID: add support for new revision of Apple aluminum keyboard
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad714x - read the interrupt status registers in a row Input: ad714x - use DMA-safe buffers for spi_write() Input: ad714x - fix endianness issues Input: ad714xx-spi - force SPI bus into the default 8-bit mode Input: ep93xx_keypad - add missing include of linux/module.h Input: tnetv107x-ts - add missing include of linux/module.h Input: max11801_ts - correct license statement Input: atmel_mxt_ts - report pressure information from the driver Input: bcm5974 - Add support for newer MacBookPro8,2 Input: wacom - report id 3 returns 4 bytes of data Input: wacom - add WAC_MSG_RETRIES define Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K) Input: tegra-kbc - correct call to input_free_device Input: mpu3050 - correct call to input_free_device Input: bcm5974 - add support for touchpads found in MacBookAir4,2 Input: mma8450 - fix module device table type Input: remove CLOCK_TICK_RATE from analog joystick driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message fuse: mark pages accessed when written to fuse: delete dead .write_begin and .write_end aops fuse: fix flock fuse: fix non-ANSI void function notation
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Allow handling signals when stack is corrupted.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) bridge: fix a possible net_device leak net: Documentation: RFC 2553bis is now RFC 3493 atm: br2684: Fix oops due to skb->dev being NULL ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS net: netdev-features.txt update to Documentation/networking/00-INDEX vlan: reset headers on accel emulation path forcedeth: call vlan_mode only if hw supports vlans via-velocity: remove non-tagged packet filtering bonding:reset backup and inactive flag of slave net_sched: fix port mirror/redirect stats reporting sit tunnels: propagate IPv6 transport class to IPv4 Type of Service gianfar: reduce stack usage in gianfar_ethtool.c net: minor update to Documentation/networking/scaling.txt net: add missing entries to Documentation/networking/00-INDEX gianfar: prevent buggy hw rx vlan tagging net: sh_eth: Fix build by forgot including linux/interrupt.h drivers/net/can/sja1000/plx_pci.c: eliminate double free usbnet/cdc_ncm: Don't use stack variables for DMA vmxnet3: Don't enable vlan filters in promiscuous mode. iwlagn: sysfs couldn't find the priv pointer ...
-
Jiri Kosina authored
-
Miklos Szeredi authored
FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the message processing could overrun and result in a "kernel BUG at fs/fuse/dev.c:629!" Reported-by: Han-Wen Nienhuys <hanwenn@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org
-
Linus Torvalds authored
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, vdso: On system call restart after SYSENTER, use int $0x80 x86, UV: Remove UV delay in starting slave cpus x86, olpc: Wait for last byte of EC command to be accepted
-
- 23 Aug, 2011 15 commits
-
-
H. Peter Anvin authored
When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle the arguments to match the int $0x80 calling convention. This was probably a design mistake, but it's what it is now. This causes errors if the system call as to be restarted. For SYSENTER, we have to invoke the instruction from the vdso as the return address is hardcoded. Accordingly, we can simply replace the jump in the vdso with an int $0x80 instruction and use the slower entry point for a post-restart. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com Cc: <stable@kernel.org>
-
Ian Campbell authored
Fixes fallout due to the removal of the cast in commit aa462abe ("mm: fix __page_to_pfn for a const struct page argument") Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix tracing builds inside the source tree xfs: remove subdirectories xfs: don't expect xfs headers to be in subdirectories
-
git://git.infradead.org/users/cbou/battery-3.1Linus Torvalds authored
* git://git.infradead.org/users/cbou/battery-3.1: s3c-adc-battery: Fix compilation error due to missing header (module.h) max8997_charger: Needs module.h max8998_charger: Needs module.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector drm/ttm: ensure ttm for new node is bound before calling move_notify() drm/ttm: unbind ttm before destroying node in accel move cleanup drm/ttm: fix ttm_bo_add_ttm(user) failure path drm/radeon: Make vramlimit parameter actually work. drm/radeon: Explicitly print GTT/VRAM offsets on test failure. drm/radeon: Take IH ring into account for test size calculation. drm/radeon/alpha: Add Alpha support to Radeon DRM code
-
Linus Torvalds authored
This reverts commit f3637a5f. It turns out that this breaks several drivers, one example being OMAP boards which use the on-board OMAP UARTs and the omap-serial driver that will not boot to userspace after the commit. Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ handler type mismatch' errors: IRQ handler type mismatch for IRQ 74 current handler: serial idle ... and the reason is that setting IRQF_ONESHOT will now result in those interrupt handlers having different IRQF flags, and thus being unsharable. So the commit log in the reverted commit: "Since it is required for those users and there is no difference for others it makes sense to add this flag unconditionally." is simply not true: there may not be any difference from a "actions at irq time", but there is a *big* difference wrt this flag testing irq management (see __setup_irq() in kernel/irq/manage.c). One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but right now the safe course of action is to revert the change. Let's revisit this in a later merge window. Reported-by: Paul Walmsley <paul@pwsan.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Reim authored
Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677Signed-off-by: Thomas Reim <reimth@gmail.com> Acked-by: Chris Routh <routhy@gmail.com> Cc: <stable@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
David Herrmann authored
The wiimote resets the current drm when an extension is plugged in. Fortunately, it also sends a status report in this situation so we just reset the drm on every status report to keep the drm consistent. Also handle return reports from the wiimote which indicate success and failure of requests that we've sent. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
David Herrmann authored
The wiimote reports data in several data reporting modes (DRM). The DRM request makes the wiimote send data in the requested drm. The DRM mode can be set explicitely or can be chosen by the driver. To let the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This is no valid request and is replaced with an appropriate DRM. Currently, the driver always sets the basic DRM_K mode, but this will be extended when further peripherals like accelerometer and IR are supported. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
David Herrmann authored
This registers 4 led devices to allow controlling the wiimote leds via standard LED sysfs API. It removes the four sysfs attributes so we don't have two APIs for one device. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
David Herrmann authored
Even though the bluetooth hid backend does not react on open/close callbacks, we should call them to be consistent with other hid drivers. Also the new input open/close handlers will be used in future to prepare the wiimote device for IR/extension input. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
David Herrmann authored
The new locking scheme in HID core allows us to remove a bit of synchronization. Since the HID layer acts synchronously we simply register input core last and there are no synchonization issues anymore. Also register sysfs files after that to simplify the code. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Ben Skeggs authored
This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Ben Skeggs authored
Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Marcin Slusarz authored
ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-