- 28 Jul, 2013 2 commits
-
-
Olivier DANET authored
upstream commit 961246b4. Commit e4c6bfd2 ("mm: rearrange vm_area_struct for fewer cache misses") changed the layout of the vm_area_struct structure, it broke several SPARC32 assembly routines which used numerical constants for accessing the vm_mm field. This patch defines the VMA_VM_MM constant to replace the immediate values. Signed-off-by:
Olivier DANET <odanet@caramail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit a5faeaf9 upstream. Code in blkdev.c moves a device inode to default_backing_dev_info when the last reference to the device is put and moves the device inode back to its bdi when the first reference is acquired. This includes moving to wb.b_dirty list if the device inode is dirty. The code however doesn't setup timer to wake corresponding flusher thread and while wb.b_dirty list is non-empty __mark_inode_dirty() will not set it up either. Thus periodic writeback is effectively disabled until a sync(2) call which can lead to unexpected data loss in case of crash or power failure. Fix the problem by setting up a timer for periodic writeback in case we add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi(). Reported-by:
Bert De Jonghe <Bert.DeJonghe@amplidata.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
- 25 Jul, 2013 38 commits
-
-
Greg Kroah-Hartman authored
-
Steven Rostedt (Red Hat) authored
commit 8e2e2fa4 upstream. Commit a695cb58 "tracing: Prevent deleting instances when they are being read" tried to fix a race between deleting a trace instance and reading contents of a trace file. But it wasn't good enough. The following could crash the kernel: # cd /sys/kernel/debug/tracing/instances # ( while :; do mkdir foo; rmdir foo; done ) & # ( while :; do echo 1 > foo/events/sched/sched_switch 2> /dev/null; done ) & Luckily this can only be done by root user, but it should be fixed regardless. The problem is that a delete of the file can happen after the write to the event is opened, but before the enabling happens. The solution is to make sure the trace_array is available before succeeding in opening for write, and incerment the ref counter while opened. Now the instance can be deleted when the events are writing to the buffer, but the deletion of the instance will disable all events before the instance is actually deleted. Reported-by:
Alexander Lam <azl@google.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 2a6c24af upstream. While analyzing the code, I discovered that there's a potential race between deleting a trace instance and setting events. There are a few races that can occur if events are being traced as the buffer is being deleted. Mostly the problem comes with freeing the descriptor used by the trace event callback. To prevent problems like this, the events are disabled before the buffer is deleted. The problem with the current solution is that the event_mutex is let go between disabling the events and freeing the files, which means that the events could be enabled again while the freeing takes place. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 7b85af63 upstream. When a trace file is opened that may access a trace array, it must increment its ref count to prevent it from being deleted. Reported-by:
-
Steven Rostedt (Red Hat) authored
commit ff451961 upstream. Commit a695cb58 "tracing: Prevent deleting instances when they are being read" tried to fix a race between deleting a trace instance and reading contents of a trace file. But it wasn't good enough. The following could crash the kernel: # cd /sys/kernel/debug/tracing/instances # ( while :; do mkdir foo; rmdir foo; done ) & # ( while :; do cat foo/trace &> /dev/null; done ) & Luckily this can only be done by root user, but it should be fixed regardless. The problem is that a delete of the file can happen after the reader starts to open the file but before it grabs the trace_types_mutex. The solution is to validate the trace array before using it. If the trace array does not exist in the list of trace arrays, then it returns -ENODEV. There's a possibility that a trace_array could be deleted and a new one created and the open would open its file instead. But that is very minor as it will just return the data of the new trace array, it may confuse the user but it will not crash the system. As this can only be done by root anyway, the race will only occur if root is deleting what its trying to read at the same time. Reported-by:
-
Alexander Z Lam authored
commit a8227415 upstream. There are multiple places where the ftrace_trace_arrays list is accessed in trace_events.c without the trace_types_lock held. Link: http://lkml.kernel.org/r/1372732674-22726-1-git-send-email-azl@google.comSigned-off-by:
-
Alexander Z Lam authored
commit 2d71619c upstream. The trace_marker file was present for each new instance created, but it added the trace mark to the global trace buffer instead of to the instance's buffer. Link: http://lkml.kernel.org/r/1372717885-4543-2-git-send-email-azl@google.comSigned-off-by:
-
zhangwei(Jovi) authored
commit 11034ae9 upstream. All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't disable irqs. [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 13/13 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-513 [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-513 [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) sendmail-771 [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6) The reason is syscall tracing doesn't record irq_flags into buffer. The proper display is: [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 14/14 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-514 [001] .... 46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-514 [001] .... 46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) <...>-920 [001] .... 47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0) Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.comSigned-off-by:
zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by:
-
Steven Rostedt authored
commit 6e94a780 upstream. Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca07 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Reported-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by:
-
Peter Zijlstra authored
commit 058ebd0e upstream. Jiri managed to trigger this warning: [] ====================================================== [] [ INFO: possible circular locking dependency detected ] [] 3.10.0+ #228 Tainted: G W [] ------------------------------------------------------- [] p/6613 is trying to acquire lock: [] (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250 [] [] but task is already holding lock: [] (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0 [] [] which lock already depends on the new lock. [] [] the existing dependency chain (in reverse order) is: [] [] -> #4 (&ctx->lock){-.-...}: [] -> #3 (&rq->lock){-.-.-.}: [] -> #2 (&p->pi_lock){-.-.-.}: [] -> #1 (&rnp->nocb_gp_wq[1]){......}: [] -> #0 (rcu_node_0){..-...}: Paul was quick to explain that due to preemptible RCU we cannot call rcu_read_unlock() while holding scheduler (or nested) locks when part of the read side critical section was preemptible. Therefore solve it by making the entire RCU read side non-preemptible. Also pull out the retry from under the non-preempt to play nice with RT. Reported-by:
Jiri Olsa <jolsa@redhat.com> Helped-out-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jiri Olsa authored
commit 06f41796 upstream. The '!ctx->is_active' check has a valid scenario, so there's no need for the warning. The reason is that there's a time window between the 'ctx->is_active' check in the perf_event_enable() function and the __perf_event_enable() function having: - IRQs on - ctx->lock unlocked where the task could be killed and 'ctx' deactivated by perf_event_exit_task(), ending up with the warning below. So remove the WARN_ON_ONCE() check and add comments to explain it all. This addresses the following warning reported by Vince Weaver: [ 324.983534] ------------[ cut here ]------------ [ 324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190() [ 324.984420] Modules linked in: [ 324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246 [ 324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010 [ 324.984420] 0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00 [ 324.984420] ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860 [ 324.984420] 0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a [ 324.984420] Call Trace: [ 324.984420] <IRQ> [<ffffffff8160ea0b>] dump_stack+0x19/0x1b [ 324.984420] [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0 [ 324.984420] [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20 [ 324.984420] [<ffffffff81134437>] __perf_event_enable+0x187/0x190 [ 324.984420] [<ffffffff81130030>] remote_function+0x40/0x50 [ 324.984420] [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130 [ 324.984420] [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40 [ 324.984420] [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80 [ 324.984420] <EOI> [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70 [ 324.984420] [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210 [ 324.984420] [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60 [ 324.984420] [<ffffffff81086946>] do_exit+0x2b6/0xa40 [ 324.984420] [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30 [ 324.984420] [<ffffffff81087279>] do_group_exit+0x49/0xc0 [ 324.984420] [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620 [ 324.984420] [<ffffffff81043057>] do_signal+0x57/0x5a0 [ 324.984420] [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0 [ 324.984420] [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe [ 324.984420] [<ffffffff816166cd>] ? retint_signal+0x11/0x84 [ 324.984420] [<ffffffff81043605>] do_notify_resume+0x65/0x80 [ 324.984420] [<ffffffff81616702>] retint_signal+0x46/0x84 [ 324.984420] ---[ end trace 442ec2f04db3771a ]--- Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 734df5ab upstream. Currently when the child context for inherited events is created, it's based on the pmu object of the first event of the parent context. This is wrong for the following scenario: - HW context having HW and SW event - HW event got removed (closed) - SW event stays in HW context as the only event and its pmu is used to clone the child context The issue starts when the cpu context object is touched based on the pmu context object (__get_cpu_context). In this case the HW context will work with SW cpu context ending up with following WARN below. Fixing this by using parent context pmu object to clone from child context. Addresses the following warning reported by Vince Weaver: [ 2716.472065] ------------[ cut here ]------------ [ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x) [ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn [ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2 [ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2 [ 2716.476035] 0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18 [ 2716.476035] ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad [ 2716.476035] ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550 [ 2716.476035] Call Trace: [ 2716.476035] [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70 [ 2716.476035] [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f [ 2716.476035] [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194 [ 2716.476035] [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c [ 2716.476035] [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394 [ 2716.476035] [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98 [ 2716.476035] [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad [ 2716.476035] [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1 [ 2716.476035] [<ffffffff8100205d>] ? do_signal+0x3c/0x432 [ 2716.476035] [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141 [ 2716.476035] [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90 [ 2716.476035] [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118 [ 2716.476035] [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c [ 2716.476035] [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6 [ 2716.476035] [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d [ 2716.476035] [<ffffffff813654f5>] ? retint_signal+0x3d/0x78 [ 2716.476035] ---[ end trace 827178d8a5966c3d ]--- Reported-by:
-
Takashi Iwai authored
commit 86f0b5b8 upstream. snd_pcm_stop() must be called in the PCM substream lock context. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Daney authored
commit d949b4fe upstream. Commit abe77f90 (MIPS: Octeon: Add kexec and kdump support) added a bootmem region for the kernel image itself. The problem is that this is rounded up to a 0x100000 boundary, which is memory that may not be owned by the kernel. Depending on the kernel's configuration based size, this 'extra' memory may contain data passed from the bootloader to the kernel itself, which if clobbered makes the kernel crash in various ways. The fix: Quit rounding the size up, so that we only use memory assigned to the kernel. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5449/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Arnd Bergmann authored
commit e8d39240 upstream. The function stub for cpufreq_cooling_get_level introduced in 57df8106 "Thermal: exynos: fix cooling state translation" is not syntactically correct C and needs to be fixed to avoid this error: In file included from drivers/thermal/db8500_thermal.c:20:0: include/linux/cpu_cooling.h: In function 'cpufreq_cooling_get_level': include/linux/cpu_cooling.h:57:1: error: parameter name omitted unsigned long cpufreq_cooling_get_level(unsigned int, unsigned int) ^ include/linux/cpu_cooling.h:57:1: error: parameter name omitted Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Eduardo Valentin <eduardo.valentin@ti.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Amit Daniel kachhap <amit.daniel@samsung.com> Signed-off-by:
-
Max Filippov authored
commit c5a771d0 upstream. The virtual address of boot parameters chain is passed to the kernel via a2 register. Adjust it in case it is remapped during MMUv3 -> MMUv2 mapping change, i.e. when it is in the first 128M. Also fix interpretation of initrd and FDT addresses passed in the boot parameters: these are physical addresses. Reported-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Chris Zankel <chris@zankel.net> Signed-off-by:
-
Alex Williamson authored
commit 60d0ca3c upstream. If we use a large mapping, the expectation is that only unmaps from the first pte in the superpage are supported. Unmaps from offsets into the superpage should fail (ie. return zero sized unmap). In the current code, unmapping from an offset clears the size of the full mapping starting from an offset. For instance, if we map a 16k physically contiguous range at IOVA 0x0 with a large page, then attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and the unmap returns 16k unmapped. This potentially incorrectly clears valid mappings and confuses drivers like VFIO that use the unmap size to release pinned pages. Fix by refusing to unmap from offsets into the page. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Emil Velikov authored
commit 378f2bcd upstream. The commit commit 476e84e1 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Feb 11 09:24:23 2013 +1000 drm/nv50-/disp: initial supervisor support for off-chip encoders changed the write mask in one of the interrupt functions for on-chip encoders, causing a regression in certain VGA dual-head setups. This commit reintroduces the mask thus resolving the regression Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66129Reported-and-Tested-by:
Yves-Alexis <corsac@debian.org> CC: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit bf03d1b2 upstream. This is the nva3 counterpart to commit beba44b1 (drm/nv84/disp: Fix HDMI audio regression). The regression happened as a result of refactoring in commit 8e9e3d2d (drm/nv84/disp: move hdmi control into core). Reported-and-tested-by:
Max Baldwin <archerseven@gmail.com> Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Alex Deucher authored
commit 80101790 upstream. Mac laptops with multiple GPUs apparently use the gmux driver for backlight control. Don't register a radeon backlight interface. We may need to add other pci ids for other hybrid mac laptops. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=65377Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit f100380e upstream. - remove adding 2 to checksum, this is incorrect. This was incorrectly introduced in: 92db7f6c http://lists.freedesktop.org/archives/dri-devel/2011-December/017717.html However, the off by 2 was due to adding the version twice. From the examples in the URL above: [Rafał Miłecki][RV620] fglrx: 0x7454: 00 A8 5E 79 R600_HDMI_VIDEOINFOFRAME_0 0x7458: 00 28 00 10 R600_HDMI_VIDEOINFOFRAME_1 0x745C: 00 48 00 28 R600_HDMI_VIDEOINFOFRAME_2 0x7460: 02 00 00 48 R600_HDMI_VIDEOINFOFRAME_3 =================== (0x82 + 0x2 + 0xD) + 0x1F8 = 0x289 -0x289 = 0x77 However, the payload sum is not 0x1f8, it's 0x1f6. 00 + A8 + 5E + 00 + 00 + 28 + 00 + 10 + 00 + 48 + 00 + 28 + 00 + 48 = 0x1f6 Bits 25:24 of HDMI_VIDEOINFOFRAME_3 are the packet version, not part of the payload. So the total would be: (0x82 + 0x2 + 0xD) + 0x1f6 = 0x287 -0x287 = 0x79 - properly emit the AVI infoframe version. This was not being emitted previous which is probably what caused the issue above. This should fix blank screen when HDMI audio is enabled on certain monitors. Signed-off-by:
-
Marcin Slusarz authored
commit d005f51e upstream. Page tables on nv50 take 48kB, which can be hard to allocate in one piece. Let's use vmalloc. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
-
Julia Lemire authored
commit abbee623 upstream. At the larger resolutions, the g200e series sometimes struggles with maintaining a proper output. Problems like flickering or black bands appearing on screen can occur. In order to avoid this, limitations regarding resolutions and bandwidth have been added for the different variations of the g200e series. This code was ported from the old xorg mga driver. Signed-off-by:
Julia Lemire <jlemire@matrox.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
YoungJun Cho authored
commit 2e07fb22 upstream. If idr_alloc() is failed, obj->name can be error value. Also it cleans up duplicated flink processing code. This regression has been introduced in commit 2e928815 Author: Tejun Heo <tj@kernel.org> Date: Wed Feb 27 17:04:08 2013 -0800 drm: convert to idr_alloc() Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
commit daa13e1c upstream. In the introduction of the non-blocking wait, I cut'n'pasted the wait completion code from normal locked path. Unfortunately, this neglected that the normal path returned early if the wait returned early. The result is that read-only waits may return whilst the GPU is still writing to the bo. Fixes regression from commit 3236f57a [v3.7] Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 24 09:35:09 2012 +0100 drm/i915: Use a non-blocking wait for set-to-domain ioctl Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ben Widawsky authored
commit a0de80a0 upstream. With updates to the spec, we can actually see the context layout, and how many dwords are allocated. That table suggests we need 70720 bytes per HW context. Rounded up, this is 18 pages. Looking at what lives after the current 4 pages we use, I can't see too much important (mostly it's d3d related), but there are a couple of things which look scary. I am hopeful this can explain some of our odd HSW failures. v2: Make the context only 17 pages. The power context space isn't used ever, and execlists aren't used in our driver, making the actual total 66944 bytes. v3: Add a comment to the code. (Jesse & Paulo) Reported-by:
"Azad, Vinit" <vinit.azad@intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Daniel Vetter authored
commit 4f7fd709 upstream. Bspec seems to be full of lies, at least it disagress with reality: Two systems corrobated that SDVO hpd bits are the same as on gen3. v2: Update comment a bit. Tested-by:
Alex Fiestas <afiestas@kde.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405Acked-by:
-
Benjamin Herrenschmidt authored
commit 6dd18e46 upstream. Commit: e38c0a1f of/address: Handle #address-cells > 2 specially broke real time clock access on Bimini, js2x, and similar powerpc machines using the "maple" platform. That code was indirectly relying on the old (broken) behaviour of the translation for the hypertransport to ISA bridge. This fixes it by treating hypertransport as a PCI bus Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Cc: Jonghwan Choi <jhbird.choi@gmail.com> Signed-off-by:
-
J. Bruce Fields authored
commit 1f691b07 upstream. Though clients we care about mostly don't do this, it is possible for rpc requests to be sent in multiple fragments. Here we have a sanity check to ensure that the final received rpc isn't too small--except that the number we're actually checking is the length of just the final fragment, not of the whole rpc. So a perfectly legal rpc that's unluckily fragmented could cause the server to close the connection here. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit cf3aa02c upstream. If we detect that an rpc is too short, we abort and close the connection. Except, there's a bug here: we're leaving sk_datalen nonzero without leaving any pages in the sk_pages array. The most likely result of the inconsistency is a subsequent crash in svc_tcp_clear_pages. Also demote the BUG_ON in svc_tcp_clear_pages to a WARN. Signed-off-by:
-
J. Bruce Fields authored
commit 0979292b upstream. As of f025adf1 "sunrpc: Properly decode kuids and kgids in RPC_AUTH_UNIX credentials" any rpc containing a -1 (0xffff) uid or gid would fail with a badcred error. Commit afe3c3fd "svcrpc: fix failures to handle -1 uid's and gid's" fixed part of the problem, but overlooked the gid upcall--the kernel can request supplementary gid's for the -1 uid, but mountd's attempt write a response will get -EINVAL. Symptoms were nfsd failing to reply to the first attempt to use a newly negotiated krb5 context. Reported-by:
Sven Geggus <lists@fuchsschwanzdomain.de> Tested-by:
-
zhangwei(Jovi) authored
commit fa44063f upstream. When wrong argument is passed into uprobe_events it does not return an error: [root@jovi tracing]# echo 'p:myprobe /bin/bash' > uprobe_events [root@jovi tracing]# The proper response is: [root@jovi tracing]# echo 'p:myprobe /bin/bash' > uprobe_events -bash: echo: write error: Invalid argument Link: http://lkml.kernel.org/r/51B964FF.5000106@huawei.comSigned-off-by:
-
Bu, Yitian authored
commit dbda92d1 upstream. commit 07354eb1 ("locking printk: Annotate logbuf_lock as raw") reintroduced a lock inversion problem which was fixed in commit 0b5e1c52 ("printk: Release console_sem after logbuf_lock"). This happened probably when fixing up patch rejects. Restore the ordering and unlock logbuf_lock before releasing console_sem. Signed-off-by:
ybu <ybu@qti.qualcomm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/E807E903FE6CBE4D95E420FBFCC273B827413C@nasanexd01h.na.qualcomm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Johannes Berg authored
commit 4c8a9d4b upstream. Since Eric's commit efe117ab ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Hauke Mehrtens authored
commit 693026ef upstream. When b43 gets build into the kernel and it should use bcma we have to ensure that bcma was also build into the kernel and not as a module. In this patch this is also done for SSB, although you can not build b43 without ssb support for now. This fixes a build problem reported by Randy Dunlap in 5187EB95.2060605@infradead.org Reported-By:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Luiz Capitulino authored
commit 8c6bab4f upstream. balloon_page_dequeue() can return NULL. If it does for the first page being freed then leak_balloon() will create a scatter list with len=0. Which in turn seems to generate an invalid virtio request. I didn't get this in practice, I found it by code review. On the other hand, such an invalid virtio request will cause errors in QEMU and fill_balloon() also performs the same check implemented by this commit. This bug was introduced in e2250429. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Reddy, Sreekanth authored
commit b0df96a0 upstream. Missing delay is not getting set properly. The reason is that it is not defined in the same file from where it is being invoked. The fix is to move the missing delay module parameter from mpt2sas_base.c to mpt2sas_scsh.c. Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Sreekanth Reddy authored
commit 48ba2efc upstream. When SCSI command is received with task attribute not set, set it to SIMPLE. Previously it is set to untagged. This causes the firmware to fail the commands. Signed-off-by:
-
