- 07 Jun, 2013 21 commits
-
-
wang, biao authored
commit ac5a2962 upstream. There is a race between klist_remove and klist_release. klist_remove uses a local var waiter saved on stack. When klist_release calls wake_up_process(waiter->process) to wake up the waiter, waiter might run immediately and reuse the stack. Then, klist_release calls list_del(&waiter->list) to change previous wait data and cause prior waiter thread corrupt. The patch fixes it against kernel 3.9. Signed-off-by:
wang, biao <biao.wang@intel.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leonid Yegoshin authored
commit c2cc499c upstream. Page 'new' during MIGRATION can't be flushed with flush_cache_page(). Using flush_cache_page(vma, addr, pfn) is justified only if the page is already placed in process page table, and that is done right after flush_cache_page(). But without it the arch function has no knowledge of process PTE and does nothing. Besides that, flush_cache_page() flushes an application cache page, but the kernel has a different page virtual address and dirtied it. Replace it with flush_dcache_page(new) which is the proper usage. The old page is flushed in try_to_unmap_one() before migration. This bug takes place in Sead3 board with M14Kc MIPS CPU without cache aliasing (but Harvard arch - separate I and D cache) in tight memory environment (128MB) each 1-3days on SOAK test. It fails in cc1 during kernel build (SIGILL, SIGBUS, SIGSEG) if CONFIG_COMPACTION is switched ON. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Leonid Yegoshin <yegoshin@mips.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Christian Gmeiner authored
commit 4b949b8a upstream. During the development of this driver an in-house register documentation was used. The last week some integration tests were done and this problem was found. It turned out that the released register documentation is wrong. The fix is very simple: shift all masks by one. Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Bryan Wu <cooloney@gmail.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Martin Michlmayr authored
commit 99e11334 upstream. Enable KW_PCIE1 on QNAP TS-11x/TS-21x devices as newer revisions (rev 1.3) have a USB 3.0 chip from Etron on PCIe port 1. Thanks to Marek Vasut for identifying this issue! Signed-off-by:
Martin Michlmayr <tbm@cyrius.com> Tested-by:
Marek Vasut <marex@denx.de> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Joseph Qi authored
commit b4ca2b4b upstream. Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Acked-by:
Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by:
-
Ben Hutchings authored
commit 5a1e99dd upstream. The comparison between traced and symbol addresses is backwards: if the traced address doesn't exactly match a symbol (which we don't expect it to), we'll show the next symbol and the offset to it, whereas we should show the previous symbol and the offset from it. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ben Hutchings authored
commit 140c3c6a upstream. This works much better if we don't treat protocol numbers as addresses. Signed-off-by:
-
OGAWA Hirofumi authored
commit 7b92d03c upstream. Intermediate value of fat_clusters can be overflowed on 32bits arch. Reported-by:
Krzysztof Strasburger <strasbur@chkw386.ch.pwr.wroc.pl> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Jeff Layton authored
commit c2b93e06 upstream. It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Reported-and-Tested-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Alan Stern authored
commit 997ff893 upstream. HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
ZhenHua <zhen-hual@hp.com> Signed-off-by:
-
Alan Stern authored
commit e4f47e36 upstream. This patch shortens the logic in xhci_endpoint_init() by moving common calculations involving max_packet and max_burst outside the switch statement, rather than repeating the same code in multiple case-specific statements. It also replaces two usages of max_packet which were clearly intended to be max_burst all along. More importantly, it compensates for a common bug in high-speed bulk endpoint descriptors. In many devices there is a bulk endpoint having a wMaxPacketSize value smaller than 512, which is forbidden by the USB spec. Some xHCI controllers can't handle this and refuse to accept the endpoint. This patch changes the max_packet value to 512, which allows the controller to use the endpoint properly. In practice the bogus maxpacket size doesn't matter, because none of the transfers sent via these endpoints are longer than the maxpacket value anyway. Signed-off-by:
"Aurélien Leblond" <blablack@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit bac6b032 upstream. Werner Fink has reported problems with this hub. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Schemmel Hans-Christoph authored
commit 8ff10bdb upstream. /drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by:
Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by:
-
Wang YanQing authored
commit dab73b4e upstream. I meet emacs hang in start if I do the operation below: 1: echo 3 > /proc/sys/vm/drop_caches 2: emacs BigFile 3: Press CTRL-S follow 2 immediately Then emacs hang on, CTRL-Q can't resume, the terminal hang on, you can do nothing with this terminal except close it. The reason is before emacs takeover control the tty, we use CTRL-S to XOFF it. Then when emacs takeover the control, it may don't use the flow-control, so emacs hang. This patch fix it. This patch will fix a kind of strange tty relation hang problem, I believe I meet it with vim in ssh, and also see below bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 2a0ebf80 upstream. The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Gomella, Andrew (NIH/NHLBI) [F] authored
commit 71381439 upstream. Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by:
Andrew Gomella <andrew.gomella@nih.gov> Signed-off-by:
-
Dan Williams authored
commit 49c6e370 upstream. A rebranded Novatel E371 for AT&T's LTE bands. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Teppo Kotilainen authored
commit 73c042df upstream. Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by:
Teppo Kotilainen <qubit303@gmail.com> Signed-off-by:
-
Hema Prathaban authored
commit 0a438d5b upstream. use free_netdev() instead of kfree(pDevice->apdev) Signed-off-by:
Hema Prathaban <hemaklnce@gmail.com> Signed-off-by:
-
Gregory CLEMENT authored
commit 2b8b2797 upstream. When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d8 ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by:
-
Hans-Christian Egtvedt authored
commit e68c636d upstream. Caught by static code analysis by David. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
- 24 May, 2013 6 commits
-
-
Greg Kroah-Hartman authored
-
Alan Cox authored
commit e1d45ae1 upstream. If we set mantis->fe to NULL on an error its not a good idea to then try passing NULL to the unregister paths and oopsing really. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Niels Ole Salscheider authored
commit fc986034 upstream. Add ULL prefix to avoid overflow. Signed-off-by:
Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mika Westerberg authored
commit 2a2d95e9 upstream. If the I2C bus is put to a low power state by an ACPI method it might pull the SDA line low (as its power is removed). Once the bus is put to full power state again, the SDA line is pulled back to high. This transition looks like a STOP condition from the controller point-of-view which sets STOP detected bit in its status register causing the driver to fail subsequent transfers. Fix this by always clearing all interrupts before we start a transfer. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Wei Yongjun authored
commit ecacb0b1 upstream. Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Gabriel de Perthuis authored
commit 03b71c6c upstream. The search ioctl skips items that are too large for a result buffer, but inline items of a certain size occuring before any search result is found would trigger an overflow and stop the search entirely. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641Signed-off-by:
Gabriel de Perthuis <g2p.code+btrfs@gmail.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
- 19 May, 2013 13 commits
-
-
Greg Kroah-Hartman authored
-
Oleg Nesterov authored
commit 264b83c0 upstream. argv_split(empty_or_all_spaces) happily succeeds, it simply returns argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to check sub_info->path != NULL to avoid the crash. This is the minimal fix, todo: - perhaps we should change argv_split() to return NULL or change the callers. - kill or justify ->path[0] check - narrow the scope of helper_lock() Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-By:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Kees Cook authored
commit fefaedcf upstream. The "boxes" parameter points into userspace memory. It should be verified like any other operation against user memory. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Benjamin LaHaise authored
commit 6368087e upstream. When a 32 bit version of ipmitool is used on a 64 bit kernel, the ipmi_devintf code fails to correctly acquire ipmi_mutex. This results in incomplete data being retrieved in some cases, or other possible failures. Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this. Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Chen Gang authored
commit a5f2b3d6 upstream. When calling memcpy, read_data and write_data need additional 2 bytes. write_data: for checking: "if (size > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)" read_data: for checking: "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)" for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)" Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Lan Tianyu authored
commit 28fe5c82 upstream. The EC driver works abnormally with IBF flag always set. IBF means "The host has written a byte of data to the command or data port, but the embedded controller has not yet read it". If IBF is set in the EC status and not cleared, this will cause all subsequent EC requests to fail with a timeout error. Change the EC driver so that it doesn't refuse to restart a transaction if IBF is set in the status. Also increase the number of transaction restarts to 5, as it turns out that 2 is not sufficient in some cases. This bug happens on several different machines (Asus V1S, Dell Latitude E6530, Samsung R719, Acer Aspire 5930G, Sony Vaio SR19VN and others). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=14733 References: https://bugzilla.kernel.org/show_bug.cgi?id=15560 References: https://bugzilla.kernel.org/show_bug.cgi?id=15946 References: https://bugzilla.kernel.org/show_bug.cgi?id=42945 References: https://bugzilla.kernel.org/show_bug.cgi?id=48221Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Shlomo Pongratz authored
commit 3eccfdb0 upstream. Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn. Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson. The routine iterates until it finds an entry whose serial number is greater than the serial number of the new one, thus the new entry should be inserted before that entry and not after. Signed-off-by:
Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Wei Yongjun authored
commit 35623715 upstream. Fix to return -ENODEV in the chip not found error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Philipp Reisner authored
commit 7c689e63 upstream. With an automatic after split-brain recovery policy of "after-sb-1pri call-pri-lost-after-sb", when trying to drbd_set_role() to R_SECONDARY, we run into a deadlock. This was first recognized and supposedly fixed by 2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are" replacing drbd_set_role() with drbd_change_state() in that code-path, but the first hunk of that patch forgets to remove the drbd_set_role(). We apparently only ever tested the "two primaries" case. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Francois Romieu authored
commit ce11ff5e upstream. Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Spotted-by:
Timo Teras <timo.teras@iki.fi> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Naoya Horiguchi authored
commit af73e4d9 upstream. The current kernel returns -EINVAL unless a given mmap length is "almost" hugepage aligned. This is because in sys_mmap_pgoff() the given length is passed to vm_mmap_pgoff() as it is without being aligned with hugepage boundary. This is a regression introduced in commit 40716e29 ("hugetlbfs: fix alignment of huge page requests"), where alignment code is pushed into hugetlb_file_setup() and the variable len in caller side is not changed. To fix this, this patch partially reverts that commit, and adds alignment code in caller side. And it also introduces hstate_sizelog() in order to get proper hstate to specified hugepage size. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881 [akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by: <iceman_dvd@yahoo.com> Cc: Steven Truelove <steven.truelove@utoronto.ca> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
-
Tomoya MORINAGA authored
commit 5c1ef591 upstream. pdc_desc_get() is called from pd_prep_slave_sg, and the function is called from interrupt context(e.g. Uart driver "pch_uart.c"). In fact, I saw kernel error message. So, GFP_ATOMIC must be used not GFP_NOIO. Signed-off-by:
Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mike Snitzer authored
commit 307615a2 upstream. The dm thin pool target claims to support the zeroing of discarded data areas. This turns out to be incorrect when processing discards that do not exactly cover a complete number of blocks, so the target must always set discard_zeroes_data_unsupported. The thin pool target will zero blocks when they are allocated if the skip_block_zeroing feature is not specified. The block layer may send a discard that only partly covers a block. If a thin pool block is partially discarded then there is no guarantee that the discarded data will get zeroed before it is accessed again. Due to this, thin devices cannot claim discards will always zero data. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Cc: Libo Chen <libo.chen@huawei.com> Signed-off-by:
-
![Gomella, Andrew (NIH/NHLBI) [F]'s avatar](https://secure.gravatar.com/avatar/bfa6f109d396238589be34a784facb06?s=80&d=identicon "Gomella, Andrew (NIH/NHLBI) [F]")
