- 12 Dec, 2022 40 commits
-
-
Ido Schimmel authored
Add a selftests that includes the following test cases: 1. Configuration tests. Both valid and invalid configurations are tested across all entry types (e.g., L2, IPv4). 2. Forwarding tests. Both host and port group entries are tested across all entry types. 3. Interaction between user installed MDB entries and IGMP / MLD control packets. Example output: INFO: # Host entries configuration tests TEST: Common host entries configuration tests (IPv4) [ OK ] TEST: Common host entries configuration tests (IPv6) [ OK ] TEST: Common host entries configuration tests (L2) [ OK ] INFO: # Port group entries configuration tests - (*, G) TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ] TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ] TEST: IPv4 (*, G) port group entries configuration tests [ OK ] TEST: IPv6 (*, G) port group entries configuration tests [ OK ] INFO: # Port group entries configuration tests - (S, G) TEST: Common port group entries configuration tests (IPv4 (S, G)) [ OK ] TEST: Common port group entries configuration tests (IPv6 (S, G)) [ OK ] TEST: IPv4 (S, G) port group entries configuration tests [ OK ] TEST: IPv6 (S, G) port group entries configuration tests [ OK ] INFO: # Port group entries configuration tests - L2 TEST: Common port group entries configuration tests (L2 (*, G)) [ OK ] TEST: L2 (*, G) port group entries configuration tests [ OK ] INFO: # Forwarding tests TEST: IPv4 host entries forwarding tests [ OK ] TEST: IPv6 host entries forwarding tests [ OK ] TEST: L2 host entries forwarding tests [ OK ] TEST: IPv4 port group "exclude" entries forwarding tests [ OK ] TEST: IPv6 port group "exclude" entries forwarding tests [ OK ] TEST: IPv4 port group "include" entries forwarding tests [ OK ] TEST: IPv6 port group "include" entries forwarding tests [ OK ] TEST: L2 port entries forwarding tests [ OK ] INFO: # Control packets tests TEST: IGMPv3 MODE_IS_INCLUE tests [ OK ] TEST: MLDv2 MODE_IS_INCLUDE tests [ OK ] Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
The test is only concerned with host MDB entries and not with MDB entries as a whole. Rename the test to reflect that. Subsequent patches will add a more general test that will contain the test cases for host MDB entries and remove the current test. Signed-off-by:
-
Ido Schimmel authored
Now that user space can specify additional attributes of port group entries such as filter mode and source list, it makes sense to allow user space to atomically modify these attributes by replacing entries instead of forcing user space to delete the entries and add them back. Replace MDB port group entries when the 'NLM_F_REPLACE' flag is specified in the netlink message header. When a (*, G) entry is replaced, update the following attributes: Source list, state, filter mode, protocol and flags. If the entry is temporary and in EXCLUDE mode, reset the group timer to the group membership interval. If the entry is temporary and in INCLUDE mode, reset the source timers of associated sources to the group membership interval. Examples: # bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent source_list 192.0.2.1,192.0.2.2 filter_mode include # bridge -d -s mdb show dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.2 permanent filter_mode include proto static 0.00 dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto static 0.00 dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode include source_list 192.0.2.2/0.00,192.0.2.1/0.00 proto static 0.00 # bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent source_list 192.0.2.1,192.0.2.3 filter_mode exclude proto zebra # bridge -d -s mdb show dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 permanent filter_mode include proto zebra blocked 0.00 dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra blocked 0.00 dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude source_list 192.0.2.3/0.00,192.0.2.1/0.00 proto zebra 0.00 # bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 temp source_list 192.0.2.4,192.0.2.3 filter_mode include proto bgp # bridge -d -s mdb show dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.4 temp filter_mode include proto bgp 0.00 dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 temp filter_mode include proto bgp 0.00 dev br0 port dummy10 grp 239.1.1.1 temp filter_mode include source_list 192.0.2.4/259.44,192.0.2.3/259.44 proto bgp 0.00 Signed-off-by:
-
Ido Schimmel authored
Add the 'MDBE_ATTR_RTPORT' attribute to allow user space to specify the routing protocol of the MDB port group entry. Enforce a minimum value of 'RTPROT_STATIC' to prevent user space from using protocol values that should only be set by the kernel (e.g., 'RTPROT_KERNEL'). Maintain backward compatibility by defaulting to 'RTPROT_STATIC'. The protocol is already visible to user space in RTM_NEWMDB responses and notifications via the 'MDBA_MDB_EATTR_RTPROT' attribute. The routing protocol allows a routing daemon to distinguish between entries configured by it and those configured by the administrator. Once MDB flush is supported, the protocol can be used as a criterion according to which the flush is performed. Examples: # bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto kernel Error: integer out of range. # bridge mdb add dev br0 port dummy10 grp 239.1.1.1 permanent proto static # bridge mdb add dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent proto zebra # bridge mdb add dev br0 port dummy10 grp 239.1.1.2 permanent source_list 198.51.100.1,198.51.100.2 filter_mode include proto 250 # bridge -d mdb show dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.2 permanent filter_mode include proto 250 dev br0 port dummy10 grp 239.1.1.2 src 198.51.100.1 permanent filter_mode include proto 250 dev br0 port dummy10 grp 239.1.1.2 permanent filter_mode include source_list 198.51.100.2/0.00,198.51.100.1/0.00 proto 250 dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude proto static Signed-off-by:
-
Ido Schimmel authored
Add new netlink attributes to the RTM_NEWMDB request that allow user space to add (*, G) with a source list and filter mode. The RTM_NEWMDB message can already dump such entries (created by the kernel) so there is no need to add dump support. However, the message contains a different set of attributes depending if it is a request or a response. The naming and structure of the new attributes try to follow the existing ones used in the response. Request: [ struct nlmsghdr ] [ struct br_port_msg ] [ MDBA_SET_ENTRY ] struct br_mdb_entry [ MDBA_SET_ENTRY_ATTRS ] [ MDBE_ATTR_SOURCE ] struct in_addr / struct in6_addr [ MDBE_ATTR_SRC_LIST ] // new [ MDBE_SRC_LIST_ENTRY ] [ MDBE_SRCATTR_ADDRESS ] struct in_addr / struct in6_addr [ ...] [ MDBE_ATTR_GROUP_MODE ] // new u8 Response: [ struct nlmsghdr ] [ struct br_port_msg ] [ MDBA_MDB ] [ MDBA_MDB_ENTRY ] [ MDBA_MDB_ENTRY_INFO ] struct br_mdb_entry [ MDBA_MDB_EATTR_TIMER ] u32 [ MDBA_MDB_EATTR_SOURCE ] struct in_addr / struct in6_addr [ MDBA_MDB_EATTR_RTPROT ] u8 [ MDBA_MDB_EATTR_SRC_LIST ] [ MDBA_MDB_SRCLIST_ENTRY ] [ MDBA_MDB_SRCATTR_ADDRESS ] struct in_addr / struct in6_addr [ MDBA_MDB_SRCATTR_TIMER ] u8 [...] [ MDBA_MDB_EATTR_GROUP_MODE ] u8 Signed-off-by:
-
Ido Schimmel authored
In preparation for allowing user space to add (*, G) entries with a source list and associated filter mode, add the necessary plumbing to handle such requests. Extend the MDB configuration structure with a currently empty source array and filter mode that is currently hard coded to EXCLUDE. Add the source entries and the corresponding (S, G) entries before making the new (*, G) port group entry visible to the data path. Handle the creation of each source entry in a similar fashion to how it is created from the data path in response to received Membership Reports: Create the source entry, arm the source timer (if needed), add a corresponding (S, G) forwarding entry and finally mark the source entry as installed (by user space). Add the (S, G) entry by populating an MDB configuration structure and calling br_mdb_add_group_sg() as if a new entry is created by user space, with the sole difference that the 'src_entry' field is set to make sure that the group timer of such entries is never armed. Note that it is not currently possible to add more than 32 source entries to a port group entry. If this proves to be a problem we can either increase 'PG_SRC_ENT_LIMIT' or avoid forcing a limit on entries created by user space. Signed-off-by:
-
Ido Schimmel authored
User space will soon be able to install a (*, G) with a source list, prompting the creation of a (S, G) entry for each source. In this case, the group timer of the (S, G) entry should never be set. Solve this by adding a new field to the MDB configuration structure that denotes whether the (S, G) corresponds to a source or not. The field will be set in a subsequent patch where br_mdb_add_group_sg() is called in order to create a (S, G) entry for each user provided source. Signed-off-by:
-
Ido Schimmel authored
There are a few places where the bridge driver differentiates between (S, G) entries installed by the kernel (in response to Membership Reports) and those installed by user space. One of them is when deleting an (S, G) entry corresponding to a source entry that is being deleted. While user space cannot currently add a source entry to a (*, G), it can add an (S, G) entry that later corresponds to a source entry created by the reception of a Membership Report. If this source entry is later deleted because its source timer expired or because the (*, G) entry is being deleted, the bridge driver will not delete the corresponding (S, G) entry if it was added by user space as permanent. This is going to be a problem when the ability to install a (*, G) with a source list is exposed to user space. In this case, when user space installs the (*, G) as permanent, then all the (S, G) entries corresponding to its source list will also be installed as permanent. When user space deletes the (*, G), all the source entries will be deleted and the expectation is that the corresponding (S, G) entries will be deleted as well. Solve this by introducing a new source entry flag denoting that the entry was installed by user space. When the entry is deleted, delete the corresponding (S, G) entry even if it was installed by user space as permanent, as the flag tells us that it was installed in response to the source entry being created. The flag will be set in a subsequent patch where source entries are created in response to user requests. Signed-off-by:
-
Ido Schimmel authored
Expose __br_multicast_del_group_src() which is symmetric to br_multicast_new_group_src() and does not remove the installed {S, G} forwarding entry, unlike br_multicast_del_group_src(). The function will be used in the error path when user space was able to add a new source entry, but failed to install a corresponding forwarding entry. Signed-off-by: -
Ido Schimmel authored
Currently, new group source entries are only created in response to received Membership Reports. Subsequent patches are going to allow user space to install (*, G) entries with a source list. As a preparatory step, expose br_multicast_new_group_src() so that it could later be invoked from the MDB code (i.e., br_mdb.c) that handles RTM_NEWMDB messages. Signed-off-by:
-
Ido Schimmel authored
Subsequent patches will add memory allocations in br_mdb_config_init() as the MDB configuration structure will include a linked list of source entries. This memory will need to be freed regardless if br_mdb_add() succeeded or failed. As a preparation for this change, add a centralized error path where the memory will be freed. Note that br_mdb_del() already has one error path and therefore does not require any changes. Signed-off-by:
-
Ido Schimmel authored
Subsequent patches are going to add additional validation functions and netlink policies. Some of these functions will need to perform parsing using nla_parse_nested() and the new policies. In order to keep all the policies next to each other, move the current policy to before the validation functions. Signed-off-by:
-
Ido Schimmel authored
When the bridge is using IGMP version 3 or MLD version 2, it handles the addition of (*, G) and (S, G) entries differently. When a new (S, G) port group entry is added, all the (*, G) EXCLUDE ports need to be added to the port group of the new entry. Similarly, when a new (*, G) EXCLUDE port group entry is added, the port needs to be added to the port group of all the matching (S, G) entries. Subsequent patches will create more differences between both entry types. Namely, filter mode and source list can only be specified for (*, G) entries. Given the current and future differences between both entry types, handle the addition of each entry type in a different function, thereby avoiding the creation of one complex function. Signed-off-by:
-
Ido Schimmel authored
Currently, the filter mode (i.e., INCLUDE / EXCLUDE) of MDB entries cannot be set from user space. Instead, it is set by the kernel according to the entry type: (*, G) entries are treated as EXCLUDE and (S, G) entries are treated as INCLUDE. This allows the kernel to derive the entry type from its filter mode. Subsequent patches will allow user space to set the filter mode of (*, G) entries, making the current assumption incorrect. As a preparation, remove the current assumption and instead determine the entry type from its key, which is a more direct way. Signed-off-by:
-
Jiapeng Chong authored
No functional modification involved. drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:714 qlcnic_validate_ring_count() warn: inconsistent indenting. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3419Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20221212055813.91154-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Tirthendu Sarkar authored
Add support for NETIF_F_LOOPBACK. This feature can be set via: $ ethtool -K eth0 loopback <on|off> This sets the MAC Tx->Rx loopback. This feature is used for the xsk selftests, and might have other uses too. Signed-off-by:
Tirthendu Sarkar <tirthendu.sarkar@intel.com> Reviewed-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Tested-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20221209185553.2520088-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Xin Long says: ==================== net: add IFF_NO_ADDRCONF to prevent ipv6 addrconf This patchset adds IFF_NO_ADDRCONF flag for dev->priv_flags to prevent ipv6 addrconf, as Jiri Pirko's suggestion. For Bonding it changes to use this flag instead of IFF_SLAVE flag in Patch 1, and for Teaming and Net Failover it sets this flag before calling dev_open() in Patch 2 and 3. ==================== Link: https://lore.kernel.org/r/cover.1670599241.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
Similar to Bonding and Team, to prevent ipv6 addrconf with IFF_NO_ADDRCONF in slave_dev->priv_flags for slave ports is also needed in net failover. Note that dev_open(slave_dev) is called in .slave_register, which is called after the IFF_NO_ADDRCONF flag is set in failover_slave_register(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf for Team port. This flag will be set in team_port_enter(), which is called before dev_open(), and cleared in team_port_leave(), called after dev_close() and the err path in team_port_add(). Signed-off-by:
-
Xin Long authored
Currently, in bonding it reused the IFF_SLAVE flag and checked it in ipv6 addrconf to prevent ipv6 addrconf. However, it is not a proper flag to use for no ipv6 addrconf, for bonding it has to move IFF_SLAVE flag setting ahead of dev_open() in bond_enslave(). Also, IFF_MASTER/SLAVE are historical flags used in bonding and eql, as Jiri mentioned, the new devices like Team, Failover do not use this flag. So as Jiri suggested, this patch adds IFF_NO_ADDRCONF in priv_flags of the device to indicate no ipv6 addconf, and uses it in bonding and moves IFF_SLAVE flag setting back to its original place. Signed-off-by:
-
Uladzislau Koshchanka authored
Remove bit_reverse() function. Instead use bitrev8() from linux/bitrev.h + bitshift. Reduces code-repetition. Signed-off-by:
Uladzislau Koshchanka <koshchanka@gmail.com> Link: https://lore.kernel.org/r/20221210004423.32332-1-koshchanka@gmail.comSigned-off-by:
-
Kurt Kanzenbach authored
The current DSA maintainers are Florian Fainelli, Andrew Lunn and Vladimir Oltean. Update the hellcreek binding accordingly. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221212081546.6916-1-kurt@linutronix.deSigned-off-by:
-
Yunsheng Lin authored
tso_count_descs() is a small function doing simple calculation, and tso_count_descs() is used in fast path, so inline it to reduce the overhead of calls. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/20221212032426.16050-1-linyunsheng@huawei.comSigned-off-by:
-
Vladimir Oltean authored
ptp_classify_raw() is not exactly cheap, since it invokes a BPF program for every skb in the receive path. For switches which do not provide ds->ops->port_rxtstamp(), running ptp_classify_raw() provides precisely nothing, so check for the presence of the function pointer first, since that is much cheaper. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Trace points for mv88e6xxx While testing Hans Schultz' attempt at offloading MAB on mv88e6xxx: https://patchwork.kernel.org/project/netdevbpf/cover/20221205185908.217520-1-netdev@kapio-technology.com/ I noticed that he still didn't get rid of the huge log spam caused by ATU and VTU violations, even if we discussed about this: https://patchwork.kernel.org/project/netdevbpf/cover/20221112203748.68995-1-netdev@kapio-technology.com/#25091076 It seems unlikely he's going to ever do this, so here is my own stab at converting those messages to trace points. This is IMO an improvement regardless of whether Hans' work with MAB lands or not, especially the VTU violations which were quite annoying to me as well. A small sample of before: $ ./bridge_locked_port.sh lan1 lan2 lan3 lan4 [ 114.465272] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9 [ 119.550508] mv88e6xxx_g1_vtu_prob_irq_thread_fn: 34 callbacks suppressed [ 120.369586] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9 [ 120.473658] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9 [ 125.535209] mv88e6xxx_g1_vtu_prob_irq_thread_fn: 21 callbacks suppressed [ 125.535243] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9 [ 126.174558] mv88e6085 d0032004.mdio-mii:10: VTU member violation for vid 100, source port 9 [ 130.234055] mv88e6085 d0032004.mdio-mii:10: ATU miss violation for 00:01:02:03:04:01 fid 3 portvec 4 spid 2 [ 130.338193] mv88e6085 d0032004.mdio-mii:10: ATU miss violation for 00:01:02:03:04:01 fid 3 portvec 4 spid 2 [ 134.626099] mv88e6xxx_g1_atu_prob_irq_thread_fn: 38 callbacks suppressed [ 134.626132] mv88e6085 d0032004.mdio-mii:10: ATU miss violation for 00:01:02:03:04:01 fid 3 portvec 4 spid 2 and after: $ trace-cmd record -e mv88e6xxx ./bridge_locked_port.sh lan1 lan2 lan3 lan4 $ trace-cmd report irq/35-moxtet-60 [001] 93.929734: mv88e6xxx_vtu_miss_violation: dev d0032004.mdio-mii:10 spid 9 vid 100 irq/35-moxtet-60 [001] 94.183209: mv88e6xxx_vtu_miss_violation: dev d0032004.mdio-mii:10 spid 9 vid 100 irq/35-moxtet-60 [001] 101.865545: mv88e6xxx_vtu_miss_violation: dev d0032004.mdio-mii:10 spid 9 vid 100 irq/35-moxtet-60 [001] 121.831261: mv88e6xxx_vtu_member_violation: dev d0032004.mdio-mii:10 spid 9 vid 100 irq/35-moxtet-60 [001] 122.371238: mv88e6xxx_vtu_member_violation: dev d0032004.mdio-mii:10 spid 9 vid 100 irq/35-moxtet-60 [001] 148.452932: mv88e6xxx_atu_miss_violation: dev d0032004.mdio-mii:10 spid 2 portvec 0x4 addr 00:01:02:03:04:01 fid 0 v1 at: https://patchwork.kernel.org/project/netdevbpf/cover/20221207233954.3619276-1-vladimir.oltean@nxp.com/ ==================== Link: https://lore.kernel.org/r/20221209172817.371434-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
It is possible to trigger these VTU violation messages very easily, it's only necessary to send packets with an unknown VLAN ID to a port that belongs to a VLAN-aware bridge. Do a similar thing as for ATU violation messages, and hide them in the kernel's trace buffer. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_vtu_miss_violation mv88e6xxx:mv88e6xxx_vtu_member_violation $ trace-cmd report Signed-off-by:
Saeed Mahameed <saeed@kernel.org> Reviewed-by:
-
Vladimir Oltean authored
In applications where the switch ports must perform 802.1X based authentication and are therefore locked, ATU violation interrupts are quite to be expected as part of normal operation. The problem is that they currently spam the kernel log, even if rate limited. Create a series of trace points, all derived from the same event class, which log these violations to the kernel's trace buffer, which is both much faster and much easier to ignore than printing to a serial console. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_atu_full_violation mv88e6xxx:mv88e6xxx_atu_miss_violation mv88e6xxx:mv88e6xxx_atu_member_violation $ trace-cmd record -e mv88e6xxx sleep 10 Signed-off-by:
-
Hans J. Schultz authored
When an ATU violation occurs, the switch uses the ATU FID register to report the FID of the MAC address that incurred the violation. It would be good for the driver to know the FID value for purposes such as logging and CPU-based authentication. Up until now, the driver has been calling the mv88e6xxx_g1_atu_op() function to read ATU violations, but that doesn't do exactly what we want, namely it calls mv88e6xxx_g1_atu_fid_write() with FID 0. (side note, the documentation for the ATU Get/Clear Violation command says that writes to the ATU FID register have no effect before the operation starts, it's only that we disregard the value that this register provides once the operation completes) So mv88e6xxx_g1_atu_fid_write() is not what we want, but rather mv88e6xxx_g1_atu_fid_read(). However, the latter doesn't exist, we need to write it. The remainder of mv88e6xxx_g1_atu_op() except for mv88e6xxx_g1_atu_fid_write() is still needed, namely to send a GET_CLR_VIOLATION command to the ATU. In principle we could have still kept calling mv88e6xxx_g1_atu_op(), but the MDIO writes to the ATU FID register are pointless, but in the interest of doing less CPU work per interrupt, write a new function called mv88e6xxx_g1_read_atu_violation() and call it. The FID will be the port default FID as set by mv88e6xxx_port_set_fid() if the VID from the packet cannot be found in the VTU. Otherwise it is the FID derived from the VTU entry associated with that VID. Signed-off-by:
Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by:
-
Vladimir Oltean authored
Currently, the MV88E6XXX_PORT_ASSOC_VECTOR_INT_AGE_OUT bit (interrupt on age out) is not enabled by the driver, and as a result, the print for age out violations is dead code. Remove it until there is some way for this to be triggered. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add a new VID/PID 0489/e0f2 for MT7922 - Add Realtek RTL8852BE support ID 0x0cb8:0xc559 - Add a new PID/VID 13d3/3549 for RTL8822CU - Add support for broadcom BCM43430A0 & BCM43430A1 - Add CONFIG_BT_HCIBTUSB_POLL_SYNC - Add CONFIG_BT_LE_L2CAP_ECRED - Add support for CYW4373A0 - Add support for RTL8723DS - Add more device IDs for WCN6855 - Add Broadcom BCM4377 family PCIe Bluetooth * tag 'for-net-next-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits) Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete Bluetooth: ISO: Avoid circular locking dependency Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave() Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave() Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave() Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave() Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave() Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave() Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave() Bluetooth: btintel: Fix missing free skb in btintel_setup_combined() Bluetooth: hci_conn: Fix crash on hci_create_cis_sync Bluetooth: btintel: Fix existing sparce warnings Bluetooth: btusb: Fix existing sparce warning Bluetooth: btusb: Fix new sparce warnings Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559 dt-bindings: net: realtek-bluetooth: Add RTL8723DS Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922 dt-bindings: bluetooth: broadcom: add BCM43430A0 & BCM43430A1 Bluetooth: hci_bcm4377: Fix missing pci_disable_device() on error in bcm4377_probe() ... ==================== Link: https://lore.kernel.org/r/20221212222322.1690780-1-luiz.dentz@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Incorrect error check in nft_expr_inner_parse(), from Dan Carpenter. 2) Add DATA_SENT state to SCTP connection tracking helper, from Sriram Yagnaraman. 3) Consolidate nf_confirm for ipv4 and ipv6, from Florian Westphal. 4) Add bitmask support for ipset, from Vishwanath Pai. 5) Handle icmpv6 redirects as RELATED, from Florian Westphal. 6) Add WARN_ON_ONCE() to impossible case in flowtable datapath, from Li Qiong. 7) A large batch of IPVS updates to replace timer-based estimators by kthreads to scale up wrt. CPUs and workload (millions of estimators). Julian Anastasov says: This patchset implements stats estimation in kthread context. It replaces the code that runs on single CPU in timer context every 2 seconds and causing latency splats as shown in reports [1], [2], [3]. The solution targets setups with thousands of IPVS services, destinations and multi-CPU boxes. Spread the estimation on multiple (configured) CPUs and multiple time slots (timer ticks) by using multiple chains organized under RCU rules. When stats are not needed, it is recommended to use run_estimation=0 as already implemented before this change. RCU Locking: - As stats are now RCU-locked, tot_stats, svc and dest which hold estimator structures are now always freed from RCU callback. This ensures RCU grace period after the ip_vs_stop_estimator() call. Kthread data: - every kthread works over its own data structure and all such structures are attached to array. For now we limit kthreads depending on the number of CPUs. - even while there can be a kthread structure, its task may not be running, eg. before first service is added or while the sysctl var is set to an empty cpulist or when run_estimation is set to 0 to disable the estimation. - the allocated kthread context may grow from 1 to 50 allocated structures for timer ticks which saves memory for setups with small number of estimators - a task and its structure may be released if all estimators are unlinked from its chains, leaving the slot in the array empty - every kthread data structure allows limited number of estimators. Kthread 0 is also used to initially calculate the max number of estimators to allow in every chain considering a sub-100 microsecond cond_resched rate. This number can be from 1 to hundreds. - kthread 0 has an additional job of optimizing the adding of estimators: they are first added in temp list (est_temp_list) and later kthread 0 distributes them to other kthreads. The optimization is based on the fact that newly added estimator should be estimated after 2 seconds, so we have the time to offload the adding to chain from controlling process to kthread 0. - to add new estimators we use the last added kthread context (est_add_ktid). The new estimators are linked to the chains just before the estimated one, based on add_row. This ensures their estimation will start after 2 seconds. If estimators are added in bursts, common case if all services and dests are initially configured, we may spread the estimators to more chains and as result, reducing the initial delay below 2 seconds. Many thanks to Jiri Wiesner for his valuable comments and for spending a lot of time reviewing and testing the changes on different platforms with 48-256 CPUs and 1-8 NUMA nodes under different cpufreq governors. The new IPVS estimators do not use workqueue infrastructure because: - The estimation can take long time when using multiple IPVS rules (eg. millions estimator structures) and especially when box has multiple CPUs due to the for_each_possible_cpu usage that expects packets from any CPU. With est_nice sysctl we have more control how to prioritize the estimation kthreads compared to other processes/kthreads that have latency requirements (such as servers). As a benefit, we can see these kthreads in top and decide if we will need some further control to limit their CPU usage (max number of structure to estimate per kthread). - with kthreads we run code that is read-mostly, no write/lock operations to process the estimators in 2-second intervals. - work items are one-shot: as estimators are processed every 2 seconds, they need to be re-added every time. This again loads the timers (add_timer) if we use delayed works, as there are no kthreads to do the timings. [1] Report from Yunhong Jiang: https://lore.kernel.org/netdev/D25792C1-1B89-45DE-9F10-EC350DC04ADC@gmail.com/ [2] https://marc.info/?l=linux-virtual-server&m=159679809118027&w=2 [3] Report from Dust: https://archive.linuxvirtualserver.org/html/lvs-devel/2020-12/msg00000.html * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: ipvs: run_estimation should control the kthread tasks ipvs: add est_cpulist and est_nice sysctl vars ipvs: use kthreads for stats estimation ipvs: use u64_stats_t for the per-cpu counters ipvs: use common functions for stats allocation ipvs: add rcu protection to stats netfilter: flowtable: add a 'default' case to flowtable datapath netfilter: conntrack: set icmpv6 redirects as RELATED netfilter: ipset: Add support for new bitmask parameter netfilter: conntrack: merge ipv4+ipv6 confirm functions netfilter: conntrack: add sctp DATA_SENT state netfilter: nft_inner: fix IS_ERR() vs NULL check ==================== Link: https://lore.kernel.org/r/20221211101204.1751-1-pablo@netfilter.orgSigned-off-by: -
Luiz Augusto von Dentz authored
This make sure HCI_OP_WRITE_AUTH_PAYLOAD_TO completes before notifying the encryption change just as is done with HCI_OP_READ_ENC_KEY_SIZE. Signed-off-by:Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This attempts to avoid circular locking dependency between sock_lock and hdev_lock: WARNING: possible circular locking dependency detected 6.0.0-rc7-03728-g18dd8ab0a783 #3 Not tainted ------------------------------------------------------ kworker/u3:2/53 is trying to acquire lock: ffff888000254130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_conn_del+0xbd/0x1d0 but task is already holding lock: ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0x1b5/0x500 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock+0x10e/0xfe0 hci_le_remote_feat_complete_evt+0x17f/0x320 hci_event_packet+0x39c/0x7d0 hci_rx_work+0x2bf/0x950 process_one_work+0x569/0x980 worker_thread+0x2a3/0x6f0 kthread+0x153/0x180 ret_from_fork+0x22/0x30 -> #1 (&hdev->lock){+.+.}-{3:3}: __mutex_lock+0x10e/0xfe0 iso_connect_cis+0x6f/0x5a0 iso_sock_connect+0x1af/0x710 __sys_connect+0x17e/0x1b0 __x64_sys_connect+0x37/0x50 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: __lock_acquire+0x1b51/0x33d0 lock_acquire+0x16f/0x3b0 lock_sock_nested+0x32/0x80 iso_conn_del+0xbd/0x1d0 iso_connect_cfm+0x226/0x680 hci_le_cis_estabilished_evt+0x1ed/0x500 hci_event_packet+0x39c/0x7d0 hci_rx_work+0x2bf/0x950 process_one_work+0x569/0x980 worker_thread+0x2a3/0x6f0 kthread+0x153/0x180 ret_from_fork+0x22/0x30 other info that might help us debug this: Chain exists of: sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> &hdev->lock --> hci_cb_list_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hci_cb_list_lock); lock(&hdev->lock); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); *** DEADLOCK *** 4 locks held by kworker/u3:2/53: #0: ffff8880021d9130 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4ad/0x980 #1: ffff888002387de0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4ad/0x980 #2: ffff888001ac0070 (&hdev->lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0xc3/0x500 #3: ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0x1b5/0x500 Signed-off-by: -
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 81be03e0 ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 9238f36a ("Bluetooth: Add request cmd_complete and cmd_status functions") Signed-off-by:
-
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 43eb12d7 ("Bluetooth: Fix/implement Three-wire reliable packet sending") Signed-off-by:
-
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 166d2f6a ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips") Signed-off-by:
-
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 0ff252c1 ("Bluetooth: hciuart: Add support QCA chipset for UART") Signed-off-by:
-
Yang Yingliang authored
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 803b5836 ("Bluetooth: btusb: Implement driver internal packet reassembly") Signed-off-by:
-
