- 03 Jun, 2015 37 commits
-
-
Marek Szyprowski authored
This patch adds System MMU nodes to all defined devices that are specific to Exynos5420/5800/5422 series. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Kukjin Kim <kgene@kernel.org>
-
Marek Szyprowski authored
This patch adds System MMU nodes to all defined devices that are specific to Exynos5250 series. Signed-off-by:
-
Marek Szyprowski authored
This patch adds System MMU nodes to all defined devices that are specific to Exynos4415 series. Signed-off-by:
-
Marek Szyprowski authored
This patch adds System MMU nodes to the devices that are specific to Exynos3250 series. Signed-off-by:
-
Marek Szyprowski authored
This patch adds System MMU nodes that are specific to Exynos4210/4x12 series. Signed-off-by:
-
Krzysztof Kozlowski authored
The Odroid XU3 Lite is almost the same as XU3, except: 1. Lower CPU frequencies (1.8 GHz for A15 and 1.3 GHz for A7, instead of 2.0 GHz and 1.4 GHz). 2. No DisplayPort. 3. No TI INA231 energy measurement sensors. This patch moves common nodes (which is almost everything) to a common DTSI file and adds a new XU3 Lite DTS. Currently in comparison to XU3, only the INA231 sensors are disabled to remove the warning: ina2xx 0-0040: error configuring the device: -6 Signed-off-by:
Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Add Hardkernel Co., Ltd. to the list of device tree vendor prefixes. Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
-
Krzysztof Kozlowski authored
The IRQB of S2MPS11 PMIC is wired to XEINT4 (GPX0-4) through pull-up resistor. Add interrupt properties and pinctrl configuration to enable RTC wake alarm of rtc-s5m driver. This also removes a warning: sec_pmic 4-0066: No interrupt specified, no interrupts Signed-off-by:
-
Andrzej Pietrasiewicz authored
Add nodes for jpeg codec in Exynos5420 SoC. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> [k.kozlowski: fixed up minor differences for applying] Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Add new labels to certain nodes on S3C2416 so they could be easily referenced by board DTS files. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Additionally remove duplicated serial and uart labels for serial. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
The i2c_7 node (i2c@12CD0000) with LVDS bridge child node was put in Exynos5250 Snow DTS file twice. Move the LVDS bridge to proper existing i2c_7 node. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Add new labels to certain nodes so they could be easily referenced by Exynos5 board DTS files. Signed-off-by:
-
Peter Chubb authored
PWM output wasn't working because it wasn't hooked up to its pincontrol. This patch: - hooks up PWM to its pincontrol, and documents what the outputs are on the XU3 - switches the LEDs that are on PWM outputs to use PWM rather than GPIO. The main effect is that the brightness of the LEDs can be controlled, and user-mode fan control is enabled via /sys/class/pwm Acked-by:Peter Chubb <peter.chubb@nicta.com.au> Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by:
-
Krzysztof Kozlowski authored
Add new labels to certain nodes so they could be easily referenced by Exynos4 board DTS files. Signed-off-by:
-
Kukjin Kim authored
-
Krzysztof Kozlowski authored
Since e4b3d380 ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") the Exynos PMU driver provides regmap to access the MIPI DPHY registers. The MIPI DPHY driver accesses this regmap through syscon phandle. Signed-off-by:
-
Krzysztof Kozlowski authored
Since e4b3d380 ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") the Exynos PMU driver provides regmap to access the MIPI DPHY registers. The MIPI DPHY node uses a phandle to syscon to get this regmap. The 'reg' field is obsolete. Signed-off-by:
-
Krzysztof Kozlowski authored
Replace fixed parent with last parent (obtained with clk_get_parent()) of clocks for devices in mfc and disp power domains. This should improve behavior if such clocks were reparented by the drivers and new parents are different than those specified in DTS. Signed-off-by:
-
- 01 Jun, 2015 1 commit
-
-
Linus Torvalds authored
-
- 31 May, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "Off-by-one in d_walk()/__dentry_kill() race fix. It's very hard to hit; possible in the same conditions as the original bug, except that you need the skipped branch to contain all the remaining evictables, so that the d_walk()-calling loop in d_invalidate() decides there's nothing more to do and doesn't go for another pass - otherwise that next pass will sweep the sucker. So it's not too urgent, but seeing that the fix is obvious and the original commit has spread into all -stable branches..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: d_walk() might skip too much
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Three fixes this time around: - fix a memory leak which occurs when probing performance monitoring unit interrupts - fix handling of non-PMD aligned end of RAM causing boot failures - fix missing syscall trace exit path with syscall tracing enabled causing a kernel oops in the audit code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8357/1: perf: fix memory leak when probing PMU PPIs ARM: fix missing syscall trace exit ARM: 8356/1: mm: handle non-pmd-aligned end of RAM
-
