SA context logic used multiple structures to store same data
over and over. By simplifying the SA context interfaces, we
can remove extra structs.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This change cleanups the mlx5 esp interface.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The mlx5 IPsec code has logical separation between code that operates
with XFRM objects (ipsec.c), HW objects (ipsec_offload.c), flow steering
logic (ipsec_fs.c) and data path (ipsec_rxtx.c).

Such separation makes sense for C-files, but isn't needed at all for
H-files as they are included in batch anyway.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

All callers build xfrm attributes with help of mlx5e_ipsec_build_accel_xfrm_attrs()
function that ensure validity of attributes. There is no need to recheck
them again.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5 IPsec code updated ESN through workqueue with allocation calls
in the data path, which can be saved easily if the work is created
during XFRM state initialization routine.

The locking used later in the work didn't protect from anything because
change of HW context is possible during XFRM state add or delete only,
which can cancel work and make sure that it is not running.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There is no need in one-liners wrappers to call internal functions.
Let's remove them.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The XFRM code performs fallback to software IPsec if .xdo_dev_state_add()
returns -EOPNOTSUPP. This is what mlx5 did very deep in its stack trace,
despite have all the knowledge that IPsec is not going to work in very
early stage.

This is achieved by making sure that priv->ipsec pointer is valid for
fully working and supported hardware crypto IPsec engine.

In case, the hardware IPsec is not supported, the XFRM code will set NULL
to xso->dev and it will prevent from calls to various .xdo_dev_state_*()
callbacks.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Ensure that flow steering is usable as early as possible, to understand
if crypto IPsec is supported or not.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Remove multiple function wrappers to make sure that IPsec FS initialization
and cleanup functions present in one place to help with code readability.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v5.19

First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.

Major changes:

new drivers
 - wfx: silicon labs devices
 - plfxlc: pureLiFi X, XL, XC devices

mac80211
 - host based BSS color collision detection
 - prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support

rtw88
 - support TP-Link T2E devices

rtw89
 - support firmware crash simulation
 - preparation for 8852ce hardware support

ath11k
 - Wake-on-WLAN support for QCA6390 and WCN6855
 - device recovery (firmware restart) support for QCA6390 and WCN6855
 - support setting Specific Absorption Rate (SAR) for WCN6855
 - read country code from SMBIOS for WCN6855/QCA6390
 - support for WCN6750

wcn36xx
 - support for transmit rate reporting to user space

* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
  rtw89: 8852c: rfk: add DPK
  rtw89: 8852c: rfk: add IQK
  rtw89: 8852c: rfk: add RX DCK
  rtw89: 8852c: rfk: add RCK
  rtw89: 8852c: rfk: add TSSI
  rtw89: 8852c: rfk: add LCK
  rtw89: 8852c: rfk: add DACK
  rtw89: 8852c: rfk: add RFK tables
  plfxlc: fix le16_to_cpu warning for beacon_interval
  rtw88: remove a copy of the NAPI_POLL_WEIGHT define
  carl9170: tx: fix an incorrect use of list iterator
  wil6210: use NAPI_POLL_WEIGHT for napi budget
  ath10k: remove a copy of the NAPI_POLL_WEIGHT define
  ath11k: Add support for WCN6750 device
  ath11k: Datapath changes to support WCN6750
  ath11k: HAL changes to support WCN6750
  ath11k: Add QMI changes for WCN6750
  ath11k: Fetch device information via QMI for WCN6750
  ath11k: Add register access logic for WCN6750
  ath11k: Add HW params for WCN6750
  ...
====================

Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Most drivers should not have to worry about selecting the right
weight for their NAPI instances and pass NAPI_POLL_WEIGHT.
It'd be best if we didn't require the argument at all and selected
the default internally.

This change prepares the ground for such reshuffling, allowing
for a smooth transition. The following API should remain after
the next release cycle:
  netif_napi_add()
  netif_napi_add_weight()
  netif_napi_add_tx()
  netif_napi_add_tx_weight()
Where the _weight() variants take an explicit weight argument.
I opted for a _weight() suffix rather than a __ prefix, because
we use __ in places to mean that caller needs to also issue a
synchronize_net() call.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220502232703.396351-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for
Ocelot switches. Advanced QoS classification using tc filters is covered
by tc_flower_chains.sh in the same directory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: Userspace path manager prerequisites

This series builds upon the path manager mode selection changes merged
in 4994d4fa ("Merge branch 'mptcp-path-manager-mode-selection'") to
further modify the path manager code in preparation for adding the new
netlink commands to announce/remove advertised addresses and
create/destroy subflows of an MPTCP connection. The third and final
patch series for the userspace path manager will implement those
commands as discussed in
https://lore.kernel.org/netdev/23ff3b49-2563-1874-fa35-3af55d3088e7@linux.intel.com/#r

Patches 1, 5, and 7 remove some internal constraints on path managers
(in general) without changing in-kernel PM behavior.

Patch 2 adds a self test to validate MPTCP address advertisement ack
behavior.

Patches 3, 4, and 6 add new attributes to existing MPTCP netlink events
and track internal state for populating those attributes.
====================

Link: https://lore.kernel.org/r/20220502205237.129297-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This change allows userspace PM implementations to reissue ADD_ADDR
announcements (if necessary) based on their chosen policy.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This change records the 'server_side' attribute of MPTCP_EVENT_CREATED
and MPTCP_EVENT_ESTABLISHED events to inform their recipient about the
Client/Server role of the running MPTCP application.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/246Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This change updates internal logic to permit subflows to be
established from either the client or server ends of MPTCP
connections. This symmetry and added flexibility may be
harnessed by PM implementations running on either end in
creating new subflows.

The essence of this change lies in not relying on the
"server_side" flag (which continues to be available if needed).
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Per RFC 8684, if no port is specified in an ADD_ADDR message, MPTCP
SHOULD attempt to connect to the specified address on the same port
as the port that is already in use by the subflow on which the
ADD_ADDR signal was sent.

To facilitate that, this change reflects the specific remote port in
use by that subflow in MPTCP_EVENT_ANNOUNCED events.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This change reads the addr id assigned to the remote endpoint
of a subflow from the MP_JOIN SYN/ACK message and stores it
in the related subflow context. The remote id was not being
captured prior to this change, and will now provide a consistent
view of remote endpoints and their ids as seen through netlink
events.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when
there is an active userspace daemon. If the daemon is restarting or
hasn't loaded yet, the missing echo will cause the peer to retransmit
the ADD_ADDR - and hopefully the daemon will be ready to receive it at
that later time.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Current limits on the # of addresses/subflows must apply only to
in-kernel PM managed sockets. Thus this change removes such
restrictions on connections overseen by non-kernel (e.g. userspace)
PMs. This change also ensures that the kernel does not record stats
inside struct mptcp_pm_data updated along kernel code paths when exercised
via non-kernel PMs.

Additionally, address announcements are acknolwedged and subflow
requests are honored only when it's deemed that	a userspace path
manager	is active at the time.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-updates-2022-05-02

1) Trivial Misc updates to mlx5 driver

2) From Mark Bloch: Flow steering, general steering refactoring/cleaning

An issue with flow steering deletion flow (when creating a rule without
dests) turned out to be easy to fix but during the fix some issue
with the flow steering creation/deletion flows have been found.

The following patch series tries to fix long standing issues with flow
steering code and hopefully preventing silly future bugs.

  A) Fix an issue where a proper dest type wasn't assigned.
  B) Refactor and fix dests enums values, refactor deletion
     function and do proper bookkeeping of dests.
  C) Change mlx5_del_flow_rules() to delete rules when there are no
     no more rules attached associated with an FTE.
  D) Don't call hard coded deletion function but use the node's
     defined one.
  E) Add a WARN_ON() to catch future bugs when an FTE with dests
     is deleted.

* tag 'mlx5-updates-2022-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: fs, an FTE should have no dests when deleted
  net/mlx5: fs, call the deletion function of the node
  net/mlx5: fs, delete the FTE when there are no rules attached to it
  net/mlx5: fs, do proper bookkeeping for forward destinations
  net/mlx5: fs, add unused destination type
  net/mlx5: fs, jump to exit point and don't fall through
  net/mlx5: fs, refactor software deletion rule
  net/mlx5: fs, split software and IFC flow destination definitions
  net/mlx5e: TC, set proper dest type
  net/mlx5e: Remove unused mlx5e_dcbnl_build_rep_netdev function
  net/mlx5e: Drop error CQE handling from the XSK RX handler
  net/mlx5: Print initializing field in case of timeout
  net/mlx5: Delete redundant default assignment of runtime devlink params
  net/mlx5: Remove useless kfree
  net/mlx5: use kvfree() for kvzalloc() in mlx5_ct_fs_smfs_matcher_create
====================

Link: https://lore.kernel.org/r/Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Ido Schimmel says:

====================
mlxsw: Remove size limitations on egress descriptor buffer

Petr says:

Spectrum machines have two resources related to keeping packets in an
internal buffer: bytes (allocated in cell-sized units) for packet payload,
and descriptors, for keeping headers. Currently, mlxsw only configures the
bytes part of the resource management.

Spectrum switches permit a full parallel configuration for the descriptor
resources, including port-pool and port-TC-pool quotas. By default, these
are all configured to use pool 14, with an infinite quota. The ingress pool
14 is then infinite in size.

However, egress pool 14 has finite size by default. The size is chip
dependent, but always much lower than what the chip actually permits. As a
result, we can easily construct workloads that exhaust the configured
descriptor limit.

Going forward, mlxsw will have to fix this issue properly by maintaining
descriptor buffer sizes, TC bindings, and quotas that match the
architecture recommendation. Short term, fix the issue by configuring the
egress descriptor pool to be infinite in size as well. This will maintain
the same configuration philosophy, but will unlock all chip resources to be
usable.

In this patchset, patch #1 first adds the "desc" field into the pool
configuration register. Then in patch #2, the new field is used to
configure both ingress and egress pool 14 as infinite.

In patches #3 and #4, add a selftest that verifies that a large burst
can be absorbed by the shared buffer. This test specifically exercises a
scenario where descriptor buffer is the limiting factor and the test
fails without the above patches.
====================

Link: https://lore.kernel.org/r/20220502084926.365268-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add a test that sends 1Gbps of traffic through the switch, into which it
then injects a burst of traffic and tests that there are no drops.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(),
that allow explicit overriding of packet size. Change start_traffic() and
start_tcp_traffic() to dispatch through these helpers with the default
packet size.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Spectrum machines have two resources related to keeping packets in an
internal buffer: bytes (allocated in cell-sized units) for packet payload,
and descriptors, for keeping metadata. Currently, mlxsw only configures the
bytes part of the resource management.

Spectrum switches permit a full parallel configuration for the descriptor
resources, including port-pool and port-TC-pool quotas. By default, these
are all configured to use pool 14, with an infinite quota. The ingress pool
14 is then infinite in size.

However, egress pool 14 has finite size by default. The size is chip
dependent, but always much lower than what the chip actually permits. As a
result, we can easily construct workloads that exhaust the configured
descriptor limit.

Fix the issue by configuring the egress descriptor pool to be infinite in
size as well. This will maintain the configuration philosophy of the
default configuration, but will unlock all chip resources to be usable.

In the code, include both the configuration of ingress and ingress, mostly
for clarity.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

SBPR, or Shared Buffer Pools Register, configures and retrieves the shared
buffer pools and configuration. The desc field determines whether the
configuration relates to the byte pool or the descriptor pool.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Tonghao Zhang says:

====================
use standard sysctl macro

From: Tonghao Zhang <xiangxia.m.yue@gmail.com>

This patchset introduce sysctl macro or replace var
with macro.
====================

Link: https://lore.kernel.org/r/20220501035524.91205-1-xiangxia.m.yue@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch introdues the SYSCTL_THREE.

KUnit:
[00:10:14] ================ sysctl_test (10 subtests) =================
[00:10:14] [PASSED] sysctl_test_api_dointvec_null_tbl_data
[00:10:14] [PASSED] sysctl_test_api_dointvec_table_maxlen_unset
[00:10:14] [PASSED] sysctl_test_api_dointvec_table_len_is_zero
[00:10:14] [PASSED] sysctl_test_api_dointvec_table_read_but_position_set
[00:10:14] [PASSED] sysctl_test_dointvec_read_happy_single_positive
[00:10:14] [PASSED] sysctl_test_dointvec_read_happy_single_negative
[00:10:14] [PASSED] sysctl_test_dointvec_write_happy_single_positive
[00:10:14] [PASSED] sysctl_test_dointvec_write_happy_single_negative
[00:10:14] [PASSED] sysctl_test_api_dointvec_write_single_less_int_min
[00:10:14] [PASSED] sysctl_test_api_dointvec_write_single_greater_int_max
[00:10:14] =================== [PASSED] sysctl_test ===================

./run_kselftest.sh -c sysctl
...
ok 1 selftests: sysctl: sysctl.sh

Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch replace two, four and long_one to SYSCTL_XXX.

Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ath.git patches for v5.19. Major changes:

ath11k

* support setting Specific Absorption Rate (SAR) for WCN6855

* read country code from SMBIOS for WCN6855/QCA6390

* support for WCN6750

DPK is short for digital pre-distortion calibration. It can adjusts digital
waveform according to PA linear characteristics dynamically to enhance
TX EVM.

Do this calibration when we are going to run on AP channel. To prevent
power offset out of boundary, it monitors thermal and set proper boundary
to register.

8852c needs two backup buffers, so we enlarge the array. But, 8852a still
needs only one, so it only uses first element (index zero).
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-9-pkshih@realtek.com

IQ signal calibration is a very important calibration to yield good RF
performance. We do this calibration only if we are going to run on AP
channel. During scanning phase, without this calibration RF performance
is still acceptable because it transmits with low data rate at this phase.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-8-pkshih@realtek.com

RX DCK is receiver DC calibration. Do this calibration when bringing up
interface and going to run on AP channel.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-7-pkshih@realtek.com

RCK is synchronize RC calibration. It needs to be triggered only once when
interface is going to up.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-6-pkshih@realtek.com

TSSI is transmitter signal strength indication, which is a close-loop
hardware circuit to feedback actual transmitting power as a reference for
next transmission.

When we setup channel to connect an AP, it does full calibration. When
switching bands or channels, it needs to reset hardware status to prevent
use wrong feedback of previous transmission.

To do TX power compensation reflecting current temperature, it loads tables
of compensation values into registers according to channel and band group.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-5-pkshih@realtek.com

LCK is short fro LC Tank calibration. Do this calibration once driver
loads RF parameters table. Since the characteristic can be changed by
temperature, we do this calibration again if difference of thermal value
is over a threshold.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-4-pkshih@realtek.com

DACK (digital-to-analog converters calibration) is used to calibrate DAC
to output analog signals as expected.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-3-pkshih@realtek.com

These tables are used by RFK (RF calibration) to set parameters. These
parameters can trigger certain calibration, or configure/reset settings
before and after RF calibrations.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502235408.15052-2-pkshih@realtek.com

Fix the following sparse warnings:
drivers/net/wireless/purelifi/plfxlc/chip.c:36:31: sparse: expected unsigned short [usertype] beacon_interval
drivers/net/wireless/purelifi/plfxlc/chip.c:36:31: sparse: got restricted __le16 [usertype]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220502150133.6052-1-srini.raju@purelifi.com