- 30 Oct, 2013 4 commits
-
-
Nathan Hintz authored
Don't update the slot in "bgmac_dma_rx_skb_for_slot" unless both the skb alloc and dma mapping are successful; and free the newly allocated skb if a dma mapping error occurs. This relieves the caller of the need to deduce/execute the appropriate cleanup action required when an error occurs. Signed-off-by:
Nathan Hintz <nlhintz@hotmail.com> Acked-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alistair Popple authored
Calls to mal_enable_eob_irq perform a read-write-modify of a dcr to enable device irqs which is protected by a spin lock. However calls to mal_disable_eob_irq do not take the corresponding lock. This patch resolves the problem by ensuring that calls to mal_disable_eob_irq also take the lock. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
-
Alistair Popple authored
This patch fixes a bug which would trigger the BUG_ON() at net/core/dev.c:4156. It was found that this was due to continuing processing in the current poll call even when the call to napi_reschedule failed, indicating the device was already on the polling list. This resulted in an extra call to napi_complete which triggered the BUG_ON(). This patch ensures that we only contine processing rotting packets in the current mal_poll call if we are not already on the polling list. Signed-off-by:
-
Jason Wang authored
commit 3ab098df (virtio-net: don't respond to cpu hotplug notifier if we're not ready) tries to bypass the cpu hotplug notifier by checking the config_enable and does nothing is it was false. So it need to try to hold the config_lock mutex which may happen in atomic environment which leads the following warnings: [ 622.944441] CPU0 attaching NULL sched-domain. [ 622.944446] CPU1 attaching NULL sched-domain. [ 622.944485] CPU0 attaching NULL sched-domain. [ 622.950795] BUG: sleeping function called from invalid context at kernel/mutex.c:616 [ 622.950796] in_atomic(): 1, irqs_disabled(): 1, pid: 10, name: migration/1 [ 622.950796] no locks held by migration/1/10. [ 622.950798] CPU: 1 PID: 10 Comm: migration/1 Not tainted 3.12.0-rc5-wl-01249-gb91e82d #317 [ 622.950799] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 622.950802] 0000000000000000 ffff88001d42dba0 ffffffff81a32f22 ffff88001bfb9c70 [ 622.950803] ffff88001d42dbb0 ffffffff810edb02 ffff88001d42dc38 ffffffff81a396ed [ 622.950805] 0000000000000046 ffff88001d42dbe8 ffffffff810e861d 0000000000000000 [ 622.950805] Call Trace: [ 622.950810] [<ffffffff81a32f22>] dump_stack+0x54/0x74 [ 622.950815] [<ffffffff810edb02>] __might_sleep+0x112/0x114 [ 622.950817] [<ffffffff81a396ed>] mutex_lock_nested+0x3c/0x3c6 [ 622.950818] [<ffffffff810e861d>] ? up+0x39/0x3e [ 622.950821] [<ffffffff8153ea7c>] ? acpi_os_signal_semaphore+0x21/0x2d [ 622.950824] [<ffffffff81565ed1>] ? acpi_ut_release_mutex+0x5e/0x62 [ 622.950828] [<ffffffff816d04ec>] virtnet_cpu_callback+0x33/0x87 [ 622.950830] [<ffffffff81a42576>] notifier_call_chain+0x3c/0x5e [ 622.950832] [<ffffffff810e86a8>] __raw_notifier_call_chain+0xe/0x10 [ 622.950835] [<ffffffff810c5556>] __cpu_notify+0x20/0x37 [ 622.950836] [<ffffffff810c5580>] cpu_notify+0x13/0x15 [ 622.950838] [<ffffffff81a237cd>] take_cpu_down+0x27/0x3a [ 622.950841] [<ffffffff81136289>] stop_machine_cpu_stop+0x93/0xf1 [ 622.950842] [<ffffffff81136167>] cpu_stopper_thread+0xa0/0x12f [ 622.950844] [<ffffffff811361f6>] ? cpu_stopper_thread+0x12f/0x12f [ 622.950847] [<ffffffff81119710>] ? lock_release_holdtime.part.7+0xa3/0xa8 [ 622.950848] [<ffffffff81135e4b>] ? cpu_stop_should_run+0x3f/0x47 [ 622.950850] [<ffffffff810ea9b0>] smpboot_thread_fn+0x1c5/0x1e3 [ 622.950852] [<ffffffff810ea7eb>] ? lg_global_unlock+0x67/0x67 [ 622.950854] [<ffffffff810e36b7>] kthread+0xd8/0xe0 [ 622.950857] [<ffffffff81a3bfad>] ? wait_for_common+0x12f/0x164 [ 622.950859] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950861] [<ffffffff81a45ffc>] ret_from_fork+0x7c/0xb0 [ 622.950862] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950876] smpboot: CPU 1 is now offline [ 623.194556] SMP alternatives: lockdep: fixing up alternatives [ 623.194559] smpboot: Booting Node 0 Processor 1 APIC 0x1 ... A correct fix is to unregister the hotcpu notifier during restore and register a new one in resume. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Tested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by:
-
- 29 Oct, 2013 10 commits
-
-
Vlad Yasevich authored
Currently multicast code attempts to extrace the vlan id from the skb even when vlan filtering is disabled. This can lead to mdb entries being created with the wrong vlan id. Pass the already extracted vlan id to the multicast filtering code to make the correct id is used in creation as well as lookup. Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Acked-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitchDavid S. Miller authored
Jesse Gross says: ==================== One patch for net/3.12 fixing an issue where devices could be in an invalid state they are removed while still attached to OVS. ==================== Signed-off-by: -
Michael Drüing authored
Update the URLs in the Kconfig file to the new pages at sangoma.com and cisco.com Signed-off-by:
Michael Drüing <michael@drueing.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== This pull request contains the following netfilter fix: * fix --queue-bypass in xt_NFQUEUE revision 3. While adding the revision 3 of this target, the bypass flags were not correctly handled anymore, thus, breaking packet bypassing if no application is listening from userspace, patch from Holger Eitzenberger, reported by Florian Westphal. ==================== Signed-off-by: -
Holger Eitzenberger authored
V3 of the NFQUEUE target ignores the --queue-bypass flag, causing packets to be dropped when the userspace listener isn't running. Regression is in since 8746ddcf ("netfilter: xt_NFQUEUE: introduce CPU fanout"). Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Wei Liu authored
time_after_eq() only works if the delta is < MAX_ULONG/2. For a 32bit Dom0, if netfront sends packets at a very low rate, the time between subsequent calls to tx_credit_exceeded() may exceed MAX_ULONG/2 and the test for timer_after_eq() will be incorrect. Credit will not be replenished and the guest may become unable to send packets (e.g., if prior to the long gap, all credit was exhausted). Use jiffies_64 variant to mitigate this problem for 32bit Dom0. Suggested-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jason Luan <jianhai.luan@oracle.com> Signed-off-by:
-
Ben Hutchings authored
The length calculation here is now invalid on 32-bit architectures, since sk_buff::tail is a pointer and sk_buff::transport_header is an integer offset: drivers/net/ethernet/chelsio/cxgb3/sge.c: In function 'write_ofld_wr': drivers/net/ethernet/chelsio/cxgb3/sge.c:1603:9: warning: passing argument 4 of 'make_sgl' makes integer from pointer without a cast [enabled by default] adap->pdev); ^ drivers/net/ethernet/chelsio/cxgb3/sge.c:964:28: note: expected 'unsigned int' but argument is of type 'sk_buff_data_t' static inline unsigned int make_sgl(const struct sk_buff *skb, ^ Use the appropriate skb accessor functions. Compile-tested only. Signed-off-by:Ben Hutchings <ben@decadent.org.uk> Fixes: 1a37e412 ('net: Use 16bits for *_headers fields of struct skbuff') Signed-off-by:
-
Ariel Elior authored
When the bnx2x driver is rmmoded, if VFs of a given PF will be assigned to a VM then that PF will be unable to call `pci_disable_sriov()'. If for that same PF there would also exist unassigned VFs in the hypervisor, the result will be that after the removal there will still be virtual PCI functions on the hypervisor. If the bnx2x module were to be re-inserted, the result will be that the VFs on the hypervisor will be re-probed directly following the PF's probe, even though that in regular loading flow sriov is only enabled once PF is loaded. The probed VF will then try to access its bar, causing a PCI error as the HW is not in a state enabling such a request. This patch adds a missing disablement procedure to the PF's removal, one that sets registers viewable to the VF to indicate that the VFs have no permission to access the bar, thus resulting in probe errors instead of PCI errors. Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
-
Dmitry Kravkov authored
Buffers for FW statistics were allocated at an inappropriate time; In a machine where the driver encounters problems allocating all of its queues, the driver would still create FW requests for the statistics of the non-existing queues. The wrong order of memory allocation could lead to zeroed statistics messages being sent, leading to fw assert in case function 0 was down. This changes the order of allocations, guaranteeing that statistic requests will only be generated for actual queues. Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
commit 6ff50cd5 ("tcp: gso: do not generate out of order packets") had an heuristic that can trigger a warning in skb_try_coalesce(), because skb->truesize of the gso segments were exactly set to mss. This breaks the requirement that skb->truesize >= skb->len + truesizeof(struct sk_buff); It can trivially be reproduced by : ifconfig lo mtu 1500 ethtool -K lo tso off netperf As the skbs are looped into the TCP networking stack, skb_try_coalesce() warns us of these skb under-estimating their truesize. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
- 28 Oct, 2013 1 commit
-
-
Eric Dumazet authored
When a socket is freed/reallocated, we need to clear time_next_packet or else we can inherit a prior value and delay first packets of the new flow. Signed-off-by:
-
- 27 Oct, 2013 5 commits
-
-
Randy Dunlap authored
Various typo fixes to netdev-FAQ.txt: - capitalize Linux - hyphenate dual-word adjectives - minor punctuation fixes Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Yuchung Cheng authored
Patch ed08495c "tcp: use RTT from SACK for RTO" always re-arms RTO upon obtaining a RTT sample from newly sacked data. But technically RTO should only be re-armed when the data sent before the last (re)transmission of write queue head are (s)acked. Otherwise the RTO may continue to extend during loss recovery on data sent in the future. Note that RTTs from ACK or timestamps do not have this problem, as the RTT source must be from data sent before. The new RTO re-arm policy is 1) Always re-arm RTO if SND.UNA is advanced 2) Re-arm RTO if sack RTT is available, provided the sacked data was sent before the last time write_queue_head was sent. Signed-off-by:
Larry Brakmo <brakmo@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
-
Yuchung Cheng authored
Patch ed08495c "tcp: use RTT from SACK for RTO" has a bug that it does not check if the ACK acknowledge new data before taking the RTT sample from TCP timestamps. This patch adds the check back as required by the RFC. Signed-off-by:
-
Yuchung Cheng authored
tp->lsndtime may not always be the SYNACK timestamp if a passive Fast Open socket sends data before handshake completes. And if the remote acknowledges both the data and the SYNACK, the RTT sample is already taken in tcp_ack(), so no need to call tcp_update_ack_rtt() in tcp_synack_rtt_meas() aagain. Signed-off-by:
-
Somnath Kotur authored
be2net: Warn users of possible broken functionality on BE2 cards with very old FW versions with latest driver On very old FW versions < 4.0, the mailbox command to set interrupts on the card succeeds even though it is not supported and should have failed, leading to a scenario where interrupts do not work. Hence warn users to upgrade to a suitable FW version to avoid seeing broken functionality. Signed-off-by:
Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by:
-
- 26 Oct, 2013 3 commits
-
-
David S. Miller authored
Shahed Shaikh says: ==================== qlcnic: Bug fixes This patch series contains following fixes- * Performace drop because driver was forcing adapter not to check destination IP for LRO. * driver was not issuing qlcnic_fw_cmd_set_drv_version() to 83xx adapter becasue of improper handling of QLCNIC_FW_CAPABILITY_MORE_CAPS bit. ==================== Signed-off-by: -
Shahed Shaikh authored
Only 82xx adapter advertises QLCNIC_FW_CAPABILITY_MORE_CAPS bit. Reading this bit from 83xx adapter causes the driver to skip extra capabilities registers. Because of this, driver was not issuing qlcnic_fw_cmd_set_drv_version() for 83xx adapter. This bug was introduced in commit 8af3f33d ("qlcnic: Add support for 'set driver version' in 83XX"). Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Shahed Shaikh authored
Forcing adapter to perform LRO without destination IP check degrades the performance. Signed-off-by:
-
- 25 Oct, 2013 7 commits
-
-
Freddy Xin authored
ax88179_178a: Remove AX_MEDIUM_ALWAYS_ONE bit in AX_MEDIUM_STATUS_MODE register to avoid TX throttling Remove AX_MEDIUM_ALWAYS_ONE in AX_MEDIUM_STATUS_MODE register. Setting this bit may cause TX throttling in Half-Duplex mode. Signed-off-by:
Freddy Xin <freddy@asix.com.tw> Signed-off-by:
-
Hannes Frederic Sowa authored
On receiving a packet too big icmp error we check if our current cached dst_entry in the socket is still valid. This validation check did not care about the expiration of the (cached) route. The error path I traced down: The socket receives a packet too big mtu notification. It still has a valid dst_entry and thus issues the ip6_rt_pmtu_update on this dst_entry, setting RTF_EXPIRE and updates the dst.expiration value (which could fail because of not up-to-date expiration values, see previous patch). In some seldom cases we race with a) the ip6_fib gc or b) another routing lookup which would result in a recreation of the cached rt6_info from its parent non-cached rt6_info. While copying the rt6_info we reinitialize the metrics store by copying it over from the parent thus invalidating the just installed pmtu update (both dsts use the same key to the inetpeer storage). The dst_entry with the just invalidated metrics data would just get its RTF_EXPIRES flag cleared and would continue to stay valid for the socket. We should have not issued the pmtu update on the already expired dst_entry in the first placed. By checking the expiration on the dst entry and doing a relookup in case it is out of date we close the race because we would install a new rt6_info into the fib before we issue the pmtu update, thus closing this race. Not reliably updating the dst.expire value was fixed by the patch "ipv6: reset dst.expires value when clearing expire flag". Reported-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Reported-by:
Valentijn Sessink <valentyn@blub.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Reviewed-by:
-
Hannes Frederic Sowa authored
On receiving a packet too big icmp error we update the expire value by calling rt6_update_expires. This function uses dst_set_expires which is implemented that it can only reduce the expiration value of the dst entry. If we insert new routing non-expiry information into the ipv6 fib where we already have a matching rt6_info we only clear the RTF_EXPIRES flag in rt6i_flags and leave the dst.expires value as is. When new mtu information arrives for that cached dst_entry we again call dst_set_expires. This time it won't update the dst.expire value because we left the dst.expire value intact from the last update. So dst_set_expires won't touch dst.expires. Fix this by resetting dst.expires when clearing the RTF_EXPIRE flag. dst_set_expires checks for a zero expiration and updates the dst.expires. In the past this (not updating dst.expires) was necessary because dst.expire was placed in a union with the dst_entry *from reference and rt6_clean_expires did assign NULL to it. This split happend in ecd98837 ("ipv6: fix race condition regarding dst->expires and dst->from"). Reported-by:
-
Antonio Quartulli authored
Right now skb->data is passed to rx_hook() even if the skb has not been linearised and without giving rx_hook() a way to linearise it. Change the rx_hook() interface and make it accept the skb and the offset to the UDP payload as arguments. rx_hook() is also renamed to rx_skb_hook() to ensure that out of the tree users notice the API change. In this way any rx_skb_hook() implementation can perform all the needed operations to properly (and safely) access the skb data. Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Nikolay Aleksandrov authored
In every netconsole option that can be set through configfs there's a race when checking for nt->enabled since it can be modified at the same time. Probably the most damage can be done by store_enabled when racing with another instance of itself. Fix all the races with one stone by moving the mutex lock around the ->store call for all options. Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We need to disable the netconsole (enabled = 0) before setting nt->np.dev to NULL because otherwise we might still have users after the netpoll_cleanup() since nt->enabled is set afterwards and we can have a message which will result in a NULL pointer dereference. It is very easy to hit dereferences all over the netpoll_send_udp function by running the following two loops in parallel: while [ 1 ]; do echo 1 > enabled; echo 0 > enabled; done; while [ 1 ]; do echo 00:11:22:33:44:55 > remote_mac; done; (the second loop is to generate messages, it can be done by anything) We're safe to set nt->np.dev = NULL and nt->enabled = 0 with the spinlock since it's required in the write_msg() function. Signed-off-by:
Veacelsav Falico <vfalico@redhat.com> Signed-off-by:
-
Sebastian Siewior authored
There is also a C function doing the same thing. Unless the asm code is 110% faster we could stick to the C function. Signed-off-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by:
-
- 23 Oct, 2013 9 commits
-
-
Daniel Borkmann authored
Commit 8a07eb0a ("sctp: Add ASCONF operation on the single-homed host") implemented possible use of IPv4 addresses with non SCTP_ADDR_SRC state as source address when sending ASCONF (ADD) packets, but IPv6 part for that was not implemented in 8a07eb0a. Therefore, as this is not restricted to IPv4-only, fix this up to allow the same for IPv6 addresses in SCTP. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Michio Honda <micchie@sfc.wide.ad.jp> Acked-by:
Michio Honda <micchie@sfc.wide.ad.jp> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains three netfilter fixes for your net tree, they are: * A couple of fixes to resolve info leak to userspace due to uninitialized memory area in ulogd, from Mathias Krause. * Fix instruction ordering issues that may lead to the access of uninitialized data in x_tables. The problem involves the table update (producer) and the main packet matching (consumer) routines. Detected in SMP ARMv7, from Will Deacon. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Several last minute bug fixes. Two of them are on the larger side for rc7, the dasd format patch for older storage devices and the store-clock-fast patch where we have been to optimistic with an optimization" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/time: correct use of store clock fast s390/vmlogrdr: fix array access in vmlogrdr_open() s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32() s390/dasd: check for availability of prefix command during format s390/mm,kvm: fix software dirty bits vs. kvm for old machines
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management fixes from Zhang Rui: "These includes several commits that are necessary to properly fix regression for TMU test MUX address setting after reset, for exynos thermal driver. Specifics: - fix a regression that the removal of setting a certain field at TMU configuration setting results in immediately shutdown after reset on Exynos4412 SoC. - revert a patch which tries to link the thermal_zone device and its hwmon node but breaks libsensors. - fix a deadlock/lockdep warning issue in x86_pkg_temp thermal driver, which can be reproduced on a buggy platform only. - fix ti-soc-thermal driver to fall back on bandgap reading when reading from PCB temperature sensor fails" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Revert "drivers: thermal: parent virtual hwmon with thermal zone" drivers: thermal: allow ti-soc-thermal run without pcb zone thermal: exynos: Provide initial setting for TMU's test MUX address at Exynos4412 thermal: exynos: Provide separate TMU data for Exynos4412 thermal: exynos: Remove check for thermal device pointer at exynos_report_trigger() Thermal: x86_pkg_temp: change spin lock -
Randy Dunlap authored
Fix build error in asus_wmi.c when ASUS_WMI=y and ACPI_VIDEO=m by preventing that combination. drivers/built-in.o: In function `asus_wmi_probe': asus-wmi.c:(.text+0x65ddb4): undefined reference to `acpi_video_unregister' Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - Compilation fixes for GCC < 4.4.6 - one Kbuild dependency select fix (selecting videobuf on msi3101) - driver fixes on tda10071, e4000, msi3101, soc_camera, s5p-jpeg, saa7134 and adv7511 - some device quirks needed to make them work properly - some videobuf2 core regression fixes for some features used only on embedded drivers * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] saa7134: Fix crash when device is closed before streamoff [media] adv7511: fix error return code in adv7511_probe() [media] ths8200: fix compilation with GCC < 4.4.6 [media] ad9389b: fix compilation with GCC < 4.4.6 [media] adv7511: fix compilation with GCC < 4.4.6 [media] adv7842: fix compilation with GCC < 4.4.6 [media] s5p-jpeg: Initialize vfd_decoder->vfl_dir field [media] videobuf2-dc: Fix support for mappings without struct page in userptr mode [media] vb2: Allow queuing OUTPUT buffers with zeroed 'bytesused' [media] mx3-camera: locking cleanup in mx3_videobuf_queue() [media] sh_vou: almost forever loop in sh_vou_try_fmt_vid_out() [media] tda10071: change firmware download condition [media] msi3101: correct max videobuf2 alloc [media] Add HCL T12Rg-H to STK webcam upside-down table [media] msi3101: Kconfig select VIDEOBUF2_VMALLOC [media] msi3101: msi3101_ioctl_ops can be static [media] e4000: fix PLL calc bug on 32-bit arch [media] uvcvideo: quirk PROBE_DEF for Microsoft Lifecam NX-3000 [media] uvcvideo: quirk PROBE_DEF for Dell SP2008WFP monitor
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
Pull infiniband bugfix from Roland Dreier: "Disable not-quite-ready userspace ABI for IB flow steering" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Temporarily disable create_flow/destroy_flow uverbs
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...
-
- 22 Oct, 2013 1 commit
-
-
Freddy Xin authored
Add VID:DID for Samsung USB Ethernet Adapter. Signed-off-by:
-
