- 30 Jun, 2023 40 commits
-
-
Evan Quan authored
An intentional delay is added on soft ctf triggered. Then there will be a double check for the GPU temperature before taking further action. This can avoid unintended shutdown due to temperature momentary fluctuation. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
Preparation for coming optimization which eliminates the influence of GPU temperature momentary fluctuation. Signed-off-by:
-
Aric Cyr authored
This version brings along the following: - Improve debugging mechanism for Gaming FAMS - Add monitor specific edid quirks - Fixes for Phantom pipe - Fixes for Shapper LUT - Clean up asserts Acked-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] - A full update is required if the number of planes for a given stream changes - The new fast update path only checked for stream and plane updates, but there could be a plane addition or removal without one of the stream and plane updates triggering a full update - Add an explicit check for number of planes changing for a full update Reviewed-by:
Samson Tam <samson.tam@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Gianna Binder authored
[WHY] To enable FAMS even during gaming sessions. [HOW] By leveraging a new dc.debug parameter. Reviewed-by:
Felipe Clark <felipe.clark@amd.com> Acked-by:
Gianna Binder <gianna.binder@amd.com> Tested-by:
-
Aurabindo Pillai authored
Disable FAMS on a Samsung Odyssey G9 monitor. Experiments show that this monitor does not work well under some use cases, and is likely implementation specific bug on the monitor's firmware. Cc: stable@vger.kernel.org Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Alvin Lee authored
[Description] - Previous implementation didn't consider multiple surfaces in a flip - Loop through each surface in each flip to ensure the update path is correct Reviewed-by:
-
Austin Zheng authored
[Why] K1 and K2 not being setting properly when subVP is active. [How] Have phantom pipes use the same programing as the main pipes without checking the paired stream Cc: stable@vger.kernel.org Tested-by:
Austin Zheng <austin.zheng@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] - We want to limit the new fast update path to address and gamma updates only. - Add a check in dc_update_planes_and_stream to only take the new fast update path if we only have the specific fast updates defined. Tested-by:
Jun Lei <jun.lei@amd.com> Acked-by:
-
Harry Wentland authored
The shaper LUT requires a 10-bit value of the delta between segments. We were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we want it to do. It will preserve 10-bit precision after the decimal point, but that's not quite what we want. We want 14-bit precision and discard the 4 most-significant bytes. To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead. Tested-by:
Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Lijo Lazar authored
When PSP block is not present, use direct programming. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Mangesh Gadre <Mangesh.Gadre@amd.com> Tested-by:
-
Melissa Wen authored
If shaper and 3D LUT data updates, lut_3d bit in update_flag is updated and we need to call set_input_transfer_func to program DPP shaper and 3D LUTs. Small cleanup of code style in the related if-condition. Tested-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Hersen Wu authored
This change causes regression when eDP and external display in mirror mode. When external display supports low resolution than eDP, use eDP timing to driver external display may cause corruption on external display. This reverts commit e749dd10. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
James Zhu authored
To save render node resoure, share drm device setting for pci amdgpu device with 1st XCP partition device. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lijo Lazar authored
Expose unique id of GFX v9.4.3 ASICs as device attribute. Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Lijo Lazar authored
on APUs with GFX v9.4.3 Signed-off-by:
-
Emily Deng authored
Need to unpause dpg first, or it will hit follow error during stop dpg: "[drm] Register(1) [regUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000000n" Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Le Ma authored
Handled in earlier phase Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
-
YiPeng Chai authored
Fatal error occurs in ras poison mode, mode1 reset is used to recover gpu. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
Alex Deucher authored
It's required for high priority queues. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535Reviewed-and-tested-by:
Jiadong Zhu <Jiadong.Zhu@amd.com> Signed-off-by:
-
Alex Deucher authored
So we can selectively enable it on certain devices. No intended functional change. Reviewed-and-tested-by:
-
Mario Limonciello authored
PSP functions are already set by psp_early_init() so initializing them a second time is unnecessary. No intended functional changes. Signed-off-by:
-
Mario Limonciello authored
This reverts commit 072030b1. This is no longer necessary when using newer DMUB F/W. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Mario Limonciello authored
The same parade TCON issue can potentially happen on Phoenix, and the same PSR resilience changes have been ported into the DMUB firmware. Don't allow running PSR-SU unless on the newer firmware. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Signed-off-by:
-
Mario Limonciello authored
A number of parade TCONs are causing system hangs when utilized with older DMUB firmware and PSR-SU. Some changes have been introduced into DMUB firmware to add resilience against these failures. Don't allow running PSR-SU unless on the newer firmware. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443Signed-off-by:
-
Mario Limonciello authored
The `DMUB_FW_VERSION` macro has a mistake in that the revision field is off by one byte. The last byte is typically used for other purposes and not a revision. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Reviewed-by:
-
Evan Quan authored
The feature mask bit was not correctly cleared. Without that, the L2H and H2L interrupts cannot be enabled. Signed-off-by:
-
Hong-lu Cheng authored
[why] Endless assert caused by LinesInDETChroma=0. [how] Don't floor for LinesInDETChroma=0 Tested-by:
Hong-lu Cheng <hong-lu.cheng@amd.com> Signed-off-by:
-
Ilya Bakoulin authored
[Why] This display doesn't properly indicate link loss through DPCD bits such as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE, which all remain set. In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases. For these reasons, we can miss re-training the link, since we don't properly detect link loss with this display. [Why] Add display-specific workaround to read DPCD204h, so that we can detect link loss based on 128b132b-specific status bits in this register. Tested-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by:
-
Zhigang Luo authored
port SRIOV VF missed changes from gfx_v9_0 to gfx_v9_4_3. Reviewed-by:
Zhigang Luo <Zhigang.Luo@amd.com> Signed-off-by:
-
Mario Limonciello authored
If the securedisplay TA failed to load the first time, it's unlikely to work again after a suspend/resume cycle or reset cycle and it appears to be causing problems in futher attempts. Fixes: e42dfa66 ("drm/amdgpu: Add secure display TA load for Renoir") Reported-by:
Filip Hejsek <filip.hejsek@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2633Signed-off-by:
-
Mukul Joshi authored
For GFX 9.4.3, interrupt handling needs to be updated for: - Interrupt cookie will have a NodeId field. Each KFD node needs to check the NodeId before processing the interrupt. - For CPX mode, there are additional checks of client ID needed to process the interrupt. - Add NodeId to the process drain interrupt. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Christian König authored
Since adding gang submit we need to take the gang size into account while reserving fences. Signed-off-by:
-
Hamza Mahfooz authored
Currently, it is possible for us to access memory that we shouldn't. Since, we acquire (possibly dangling) pointers to dirty rectangles before doing a bounds check to make sure we can actually accommodate the number of dirty rectangles userspace has requested to fill. This issue is especially evident if a compositor requests both MPO and damage clips at the same time, in which case I have observed a soft-hang. So, to avoid this issue, perform the bounds check before filling a single dirty rectangle and WARN() about it, if it is ever attempted in fill_dc_dirty_rect(). Cc: stable@vger.kernel.org # 6.1+ Fixes: 30ebe415 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Lijo Lazar authored
Publish energy data in 15.625mJ unit for SMU v13.0.6. The same unit is used in Aldebaran also. Signed-off-by:
-
Lijo Lazar authored
Modify it such that it doesn't change the instance mask parameter. Signed-off-by:
Victor Skvortsov <victor.skvortsov@amd.com> Signed-off-by:
-
Mangesh Gadre authored
sdma halt/unhalt is performed by psp when frontdoor loading used,so this can be skipped. v2: Instead of removing halt/unhalt completely, driver will do it only during backdoor load. Signed-off-by:Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Tao Zhou authored
No RAS irq is allowed. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
-
Kenneth Feng authored
add abnormal fan detection for smu 13.0.0 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
Xiaogang Chen authored
Since we allow kfd and graphic operate on same GPU VM to have interoperation between them GPU VM may have been used by graphic vm operations before kfd turns a GPU VM into a compute VM. Remove vm clean checking at amdgpu_vm_make_compute. Signed-off-by:
Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by:
-
