- 11 Jul, 2018 40 commits
-
-
Tokunori Ikegami authored
commit 45f75b8a upstream. For the word write functions it is retried for error. But it is not implemented to retry for the erase functions. To make sure for the erase functions change to retry as same. This is needed to prevent the flash erase error caused only once. It was caused by the error case of chip_good() in the do_erase_oneblock(). Also it was confirmed on the MACRONIX flash device MX29GL512FHT2I-11G. But the error issue behavior is not able to reproduce at this moment. The flash controller is parallel Flash interface integrated on BCM53003. Signed-off-by:
Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by:
Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tokunori Ikegami authored
commit 85a82e28 upstream. The definition can be used for other program and erase operations also. So change the naming to MAX_RETRIES from MAX_WORD_RETRIES. Signed-off-by:
-
Ross Zwisler authored
commit dbc62659 upstream. Currently device_supports_dax() just checks to see if the QUEUE_FLAG_DAX flag is set on the device's request queue to decide whether or not the device supports filesystem DAX. Really we should be using bdev_dax_supported() like filesystems do at mount time. This performs other tests like checking to make sure the dax_direct_access() path works. We also explicitly clear QUEUE_FLAG_DAX on the DM device's request queue if any of the underlying devices do not support DAX. This makes the handling of QUEUE_FLAG_DAX consistent with the setting/clearing of most other flags in dm_table_set_restrictions(). Now that bdev_dax_supported() explicitly checks for QUEUE_FLAG_DAX, this will ensure that filesystems built upon DM devices will only be able to mount with DAX if all underlying devices also support DAX. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Fixes: commit 545ed20e ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit ad3793fc upstream. Rather than having DAX support be unique by setting it based on table type in dm_setup_md_queue(). Signed-off-by:
-
Ross Zwisler authored
commit 15256f6c upstream. Add an explicit check for QUEUE_FLAG_DAX to __bdev_dax_supported(). This is needed for DM configurations where the first element in the dm-linear or dm-stripe target supports DAX, but other elements do not. Without this check __bdev_dax_supported() will pass for such devices, letting a filesystem on that device mount with the DAX option. Signed-off-by:
-
Dave Jiang authored
commit 80660f20 upstream. The function return values are confusing with the way the function is named. We expect a true or false return value but it actually returns 0/-errno. This makes the code very confusing. Changing the return values to return a bool where if DAX is supported then return true and no DAX support returns false. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Darrick J. Wong authored
commit ba23cba9 upstream. Change bdev_dax_supported so it takes a bdev parameter. This enables multi-device filesystems like xfs to check that a dax device can work for the particular filesystem. Once that's in place, actually fix all the parts of XFS where we need to be able to distinguish between datadev and rtdev. This patch fixes the problem where we screw up the dax support checking in xfs if the datadev and rtdev have different dax capabilities. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Martin Kaiser authored
commit 3f77f244 upstream. The v21 version of the NAND flash controller contains a Spare Area Size Register (SPAS) at offset 0x10. Its setting defaults to the maximum spare area size of 218 bytes. The size that is set in this register is used by the controller when it calculates the ECC bytes internally in hardware. Usually, this register is updated from settings in the IIM fuses when the system is booting from NAND flash. For other boot media, however, the SPAS register remains at the default setting, which may not work for the particular flash chip on the board. The same goes for flash chips whose configuration cannot be set in the IIM fuses (e.g. chips with 2k sector size and 128 bytes spare area size can't be configured in the IIM fuses on imx25 systems). Set the SPAS register explicitly during the preset operation. Derive the register value from mtd->oobsize that was detected during probe by decoding the flash chip's ID bytes. While at it, rename the define for the spare area register's offset to NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is different from the register on v21 controllers. Fixes: d4840180 ("mtd: mxc_nand: set NFC registers after reset") Cc: stable@vger.kernel.org Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Brad Love authored
commit 3ee9bc12 upstream. The cx25840 driver currently configures 885, 887, and 888 using default divisors for each chip. This check to see if the cx23885 driver has passed the cx25840 a non-default clock rate for a specific chip. If a cx23885 board has left clk_freq at 0, the clock default values will be used to configure the PLLs. This patch only has effect on 888 boards who set clk_freq to 25M. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Rasmus Villemoes authored
commit 9564a8cf upstream. I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 5bbb99d2 which is commit 88075256 upstream. Jiri writes that this was an incorrect fix, and Madalin-cristian says it was fixed differently in a later patch. So just revert this from 4.14.y. Reported-by:
Jiri Slaby <jslaby@suse.cz> Cc: Madalin Bucur <madalin.bucur@nxp.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jaegeuk Kim authored
commit dc7a10dd upstream. If write is failed, we must deallocate the blocks that we couldn't write. Cc: stable@vger.kernel.org Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Sakari Ailus authored
commit 03703ed1 upstream. If buffers were prepared or queued and the buffers were released without starting the queue, the finish mem op (corresponding to the prepare mem op) was never called to the buffers. Before commit a136f59c there was no need to do this as in such a case the prepare mem op had not been called yet. Address the problem by explicitly calling finish mem op when the queue is stopped if the buffer is in either prepared or queued state. Fixes: a136f59c ("[media] vb2: Move buffer cache synchronisation to prepare from queue") Cc: stable@vger.kernel.org # for v4.13 and up Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Naoya Horiguchi authored
commit 31286a84 upstream. Recently the following BUG was reported: Injecting memory failure for pfn 0x3c0000 at process virtual address 0x7fe300000000 Memory failure: 0x3c0000: recovery action for huge page: Recovered BUG: unable to handle kernel paging request at ffff8dfcc0003000 IP: gup_pgd_range+0x1f0/0xc20 PGD 17ae72067 P4D 17ae72067 PUD 0 Oops: 0000 [#1] SMP PTI ... CPU: 3 PID: 5467 Comm: hugetlb_1gb Not tainted 4.15.0-rc8-mm1-abc+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 You can easily reproduce this by calling madvise(MADV_HWPOISON) twice on a 1GB hugepage. This happens because get_user_pages_fast() is not aware of a migration entry on pud that was created in the 1st madvise() event. I think that conversion to pud-aligned migration entry is working, but other MM code walking over page table isn't prepared for it. We need some time and effort to make all this work properly, so this patch avoids the reported bug by just disabling error handling for 1GB hugepage. [n-horiguchi@ah.jp.nec.com: v2] Link: http://lkml.kernel.org/r/1517284444-18149-1-git-send-email-n-horiguchi@ah.jp.nec.com Link: http://lkml.kernel.org/r/1517207283-15769-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Punit Agrawal <punit.agrawal@arm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Rakib Mullick authored
irq/core: Fix boot crash when the irqaffinity= boot parameter is passed on CPUMASK_OFFSTACK=y kernels(v1) commit 10d94ff4 upstream. When the irqaffinity= kernel parameter is passed in a CPUMASK_OFFSTACK=y kernel, it fails to boot, because zalloc_cpumask_var() cannot be used before initializing the slab allocator to allocate a cpumask. So, use alloc_bootmem_cpumask_var() instead. Also do some cleanups while at it: in init_irq_default_affinity() remove an #ifdef via using cpumask_available(). Signed-off-by:
Rakib Mullick <rakib.mullick@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20171026045800.27087-1-rakib.mullick@gmail.com Link: http://lkml.kernel.org/r/20171101041451.12581-1-rakib.mullick@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Janne Huttunen <janne.huttunen@nokia.com> Signed-off-by:
-
Daniel Rosenberg authored
commit 717adfda upstream. If our length is greater than the size of the buffer, we overflow the buffer Cc: stable@vger.kernel.org Signed-off-by:
Daniel Rosenberg <drosen@google.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 4f65245f upstream. uref->field_index, uref->usage_index, finfo.field_index and cinfo.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/hid/usbhid/hiddev.c:473 hiddev_ioctl_usage() warn: potential spectre issue 'report->field' (local cap) drivers/hid/usbhid/hiddev.c:477 hiddev_ioctl_usage() warn: potential spectre issue 'field->usage' (local cap) drivers/hid/usbhid/hiddev.c:757 hiddev_ioctl() warn: potential spectre issue 'report->field' (local cap) drivers/hid/usbhid/hiddev.c:801 hiddev_ioctl() warn: potential spectre issue 'hid->collection' (local cap) Fix this by sanitizing such structure fields before using them to index report->field, field->usage and hid->collection Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Jason Andryuk authored
commit ef6eaf27 upstream. Commit ac75a041 ("HID: i2c-hid: fix size check and type usage") started writing messages when the ret_size is <= 2 from i2c_master_recv. However, my device i2c-DLL07D1 returns 2 for a short period of time (~0.5s) after I stop moving the pointing stick or touchpad. It varies, but you get ~50 messages each time which spams the log hard. [ 95.925055] i2c_hid i2c-DLL07D1:01: i2c_hid_get_input: incomplete report (83/2) This has also been observed with a i2c-ALP0017. [ 1781.266353] i2c_hid i2c-ALP0017:00: i2c_hid_get_input: incomplete report (30/2) Only print the message when ret_size is totally invalid and less than 2 to cut down on the log spam. Fixes: ac75a041 ("HID: i2c-hid: fix size check and type usage") Reported-by:
John Smith <john-s-84@gmx.net> Cc: stable@vger.kernel.org Signed-off-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit d5ce4c31 upstream. sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to permit trying WRITE SAME on older SCSI devices, unless ->no_write_same is set. Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO: $ fallocate -zn -l 1k /dev/sdg fallocate: fallocate failed: Remote I/O error $ fallocate -zn -l 1k /dev/sdg # OK $ fallocate -zn -l 1k /dev/sdg # OK The following calls succeed because sd_done() sets ->no_write_same in response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing __blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios. This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is specified. For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if sd_done() has just set ->no_write_same thus indicating lack of offload support. Fixes: c20cfc27 ("block: stop using blkdev_issue_write_same for zeroing") Cc: Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Janne Huttunen <janne.huttunen@nokia.com> Signed-off-by:
-
Ilya Dryomov authored
commit 425a4dba upstream. blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case. Reviewed-by:
-
Jon Derrick authored
commit a17712c8 upstream. This patch attempts to close a hole leading to a BUG seen with hot removals during writes [1]. A block device (NVME namespace in this test case) is formatted to EXT4 without partitions. It's mounted and write I/O is run to a file, then the device is hot removed from the slot. The superblock attempts to be written to the drive which is no longer present. The typical chain of events leading to the BUG: ext4_commit_super() __sync_dirty_buffer() submit_bh() submit_bh_wbc() BUG_ON(!buffer_mapped(bh)); This fix checks for the superblock's buffer head being mapped prior to syncing. [1] https://www.spinics.net/lists/linux-ext4/msg56527.htmlSigned-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit bfe0a5f4 upstream. The kernel's ext4 mount-time checks were more permissive than e2fsprogs's libext2fs checks when opening a file system. The superblock is considered too insane for debugfs or e2fsck to operate on it, the kernel has no business trying to mount it. This will make file system fuzzing tools work harder, but the failure cases that they find will be more useful and be easier to evaluate. Signed-off-by:
-
Theodore Ts'o authored
commit c37e9e01 upstream. If there is a directory entry pointing to a system inode (such as a journal inode), complain and declare the file system to be corrupted. Also, if the superblock's first inode number field is too small, refuse to mount the file system. This addresses CVE-2018-10882. https://bugzilla.kernel.org/show_bug.cgi?id=200069Signed-off-by:
-
Theodore Ts'o authored
commit 8bc1379b upstream. Use a separate journal transaction if it turns out that we need to convert an inline file to use an data block. Otherwise we could end up failing due to not having journal credits. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071Signed-off-by:
-
Theodore Ts'o authored
commit 8cdb5240 upstream. When expanding the extra isize space, we must never move the system.data xattr out of the inode body. For performance reasons, it doesn't make any sense, and the inline data implementation assumes that system.data xattr is never in the external xattr block. This addresses CVE-2018-10880 https://bugzilla.kernel.org/show_bug.cgi?id=200005Signed-off-by:
-
Theodore Ts'o authored
commit 6e8ab72a upstream. When converting from an inode from storing the data in-line to a data block, ext4_destroy_inline_data_nolock() was only clearing the on-disk copy of the i_blocks[] array. It was not clearing copy of the i_blocks[] in ext4_inode_info, in i_data[], which is the copy actually used by ext4_map_blocks(). This didn't matter much if we are using extents, since the extents header would be invalid and thus the extents could would re-initialize the extents tree. But if we are using indirect blocks, the previous contents of the i_blocks array will be treated as block numbers, with potentially catastrophic results to the file system integrity and/or user data. This gets worse if the file system is using a 1k block size and s_first_data is zero, but even without this, the file system can get quite badly corrupted. This addresses CVE-2018-10881. https://bugzilla.kernel.org/show_bug.cgi?id=200015Signed-off-by:
-
Theodore Ts'o authored
commit bdbd6ce0 upstream. Signed-off-by:
-
Theodore Ts'o authored
commit bc890a60 upstream. If there is a corupted file system where the claimed depth of the extent tree is -1, this can cause a massive buffer overrun leading to sadness. This addresses CVE-2018-10877. https://bugzilla.kernel.org/show_bug.cgi?id=199417Signed-off-by:
-
Theodore Ts'o authored
commit 8844618d upstream. The bg_flags field in the block group descripts is only valid if the uninit_bg or metadata_csum feature is enabled. We were not consistently looking at this field; fix this. Also block group #0 must never have uninitialized allocation bitmaps, or need to be zeroed, since that's where the root inode, and other special inodes are set up. Check for these conditions and mark the file system as corrupted if they are detected. This addresses CVE-2018-10876. https://bugzilla.kernel.org/show_bug.cgi?id=199403Signed-off-by:
-
Theodore Ts'o authored
commit 819b23f1 upstream. Regardless of whether the flex_bg feature is set, we should always check to make sure the bits we are setting in the block bitmap are within the block group bounds. https://bugzilla.kernel.org/show_bug.cgi?id=199865Signed-off-by:
-
Theodore Ts'o authored
commit 77260807 upstream. It's really bad when the allocation bitmaps and the inode table overlap with the block group descriptors, since it causes random corruption of the bg descriptors. So we really want to head those off at the pass. https://bugzilla.kernel.org/show_bug.cgi?id=199865Signed-off-by:
-
Theodore Ts'o authored
commit 513f86d7 upstream. If there an inode points to a block which is also some other type of metadata block (such as a block allocation bitmap), the buffer_verified flag can be set when it was validated as that other metadata block type; however, it would make a really terrible external attribute block. The reason why we use the verified flag is to avoid constantly reverifying the block. However, it doesn't take much overhead to make sure the magic number of the xattr block is correct, and this will avoid potential crashes. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit 5369a762 upstream. In theory this should have been caught earlier when the xattr list was verified, but in case it got missed, it's simple enough to add check to make sure we don't overrun the xattr buffer. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001Signed-off-by:
-
Theodore Ts'o authored
commit e09463f2 upstream. Do not set the b_modified flag in block's journal head should not until after we're sure that jbd2_journal_dirty_metadat() will not abort with an error due to there not being enough space reserved in the jbd2 handle. Otherwise, future attempts to modify the buffer may lead a large number of spurious errors and warnings. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071Signed-off-by:
-
Mikulas Patocka authored
commit 99ec9e77 upstream. The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Michel Dänzer authored
commit 718b5406 upstream. The property size may be controlled by userspace, can be large (I've seen failure with order 4, i.e. 16 pages / 64 KB) and doesn't need to be physically contiguous. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Stefano Brivio authored
commit f46ecbd9 upstream. A "small" CIFS buffer is not big enough in general to hold a setacl request for SMB2, and we end up overflowing the buffer in send_set_info(). For instance: # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl # touch /mnt/test/acltest # getcifsacl /mnt/test/acltest REVISION:0x1 CONTROL:0x9004 OWNER:S-1-5-21-2926364953-924364008-418108241-1000 GROUP:S-1-22-2-1001 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-1-0:ALLOWED/0x0/R # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest this setacl will cause the following KASAN splat: [ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs] [ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012 [ 330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2 [ 330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 330.784395] Call Trace: [ 330.784789] dump_stack+0xc2/0x16b [ 330.786777] print_address_description+0x6a/0x270 [ 330.787520] kasan_report+0x258/0x380 [ 330.788845] memcpy+0x34/0x50 [ 330.789369] send_set_info+0x4dd/0xc20 [cifs] [ 330.799511] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.801395] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.830888] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.840367] __vfs_setxattr+0x84/0xb0 [ 330.842060] __vfs_setxattr_noperm+0xe6/0x370 [ 330.843848] vfs_setxattr+0xc2/0xd0 [ 330.845519] setxattr+0x258/0x320 [ 330.859211] path_setxattr+0x15b/0x1b0 [ 330.864392] __x64_sys_setxattr+0xc0/0x160 [ 330.866133] do_syscall_64+0x14e/0x4b0 [ 330.876631] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.878503] RIP: 0033:0x7ff2e507db0a [ 330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48 [ 330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc [ 330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a [ 330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818 [ 330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4 [ 330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007 [ 330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550 [ 330.901057] Allocated by task 1012: [ 330.902888] kasan_kmalloc+0xa0/0xd0 [ 330.904714] kmem_cache_alloc+0xc8/0x1d0 [ 330.906615] mempool_alloc+0x11e/0x380 [ 330.908496] cifs_small_buf_get+0x35/0x60 [cifs] [ 330.910510] smb2_plain_req_init+0x4a/0xd60 [cifs] [ 330.912551] send_set_info+0x198/0xc20 [cifs] [ 330.914535] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.916465] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.918453] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.920426] __vfs_setxattr+0x84/0xb0 [ 330.922284] __vfs_setxattr_noperm+0xe6/0x370 [ 330.924213] vfs_setxattr+0xc2/0xd0 [ 330.926008] setxattr+0x258/0x320 [ 330.927762] path_setxattr+0x15b/0x1b0 [ 330.929592] __x64_sys_setxattr+0xc0/0x160 [ 330.931459] do_syscall_64+0x14e/0x4b0 [ 330.933314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.936843] Freed by task 0: [ 330.938588] (stack is not available) [ 330.941886] The buggy address belongs to the object at ffff88010d5e2800 which belongs to the cache cifs_small_rq of size 448 [ 330.946362] The buggy address is located 96 bytes inside of 448-byte region [ffff88010d5e2800, ffff88010d5e29c0) [ 330.950722] The buggy address belongs to the page: [ 330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0 [ 330.955665] flags: 0x17ffffc0008100(slab|head) [ 330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80 [ 330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 330.963005] page dumped because: kasan: bad access detected [ 330.967039] Memory state around the buggy address: [ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 330.976956] ^ [ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.984225] ================================================================== Fix this by allocating a regular CIFS buffer in smb2_plain_req_init() if the request command is SMB2_SET_INFO. Reported-by:
Jianhong Yin <jiyin@redhat.com> Fixes: 366ed846 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") CC: Stable <stable@vger.kernel.org> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-and-tested-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Paulo Alcantara authored
commit 7ffbe655 upstream. For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by:
Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by:
-
Paulo Alcantara authored
commit 6aa0c114 upstream. This patch fixes a memory leak when doing a setxattr(2) in SMB2+. Signed-off-by:
-
Lars Persson authored
commit 696e420b upstream. With protocol version 2.0 mounts we have seen crashes with corrupt mid entries. Either the server->pending_mid_q list becomes corrupt with a cyclic reference in one element or a mid object fetched by the demultiplexer thread becomes overwritten during use. Code review identified a race between the demultiplexer thread and the request issuing thread. The demultiplexer thread seems to be written with the assumption that it is the sole user of the mid object until it calls the mid callback which either wakes the issuer task or deletes the mid. This assumption is not true because the issuer task can be woken up earlier by a signal. If the demultiplexer thread has proceeded as far as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer thread will happily end up calling cifs_delete_mid while the demultiplexer thread still is using the mid object. Inserting a delay in the cifs demultiplexer thread widens the race window and makes reproduction of the race very easy: if (server->large_buf) buf = server->bigbuf; + usleep_range(500, 4000); server->lstrp = jiffies; To resolve this I think the proper solution involves putting a reference count on the mid object. This patch makes sure that the demultiplexer thread holds a reference until it has finished processing the transaction. Cc: stable@vger.kernel.org Signed-off-by:
Lars Persson <larper@axis.com> Acked-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
