Since errors are propagated all the way up to the caller, propagate
possible extack of the caller all the way down to the notifier block
callback.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently if info->extack is NULL, mlxsw assumes that the event came
down from dump. Originally, the dump did not propagate the return value
back to the original caller (fib_notifier_register()). However, that is
now happening. So benefit from this and push the error up if it happened.
Remove rule cases in work handlers that are now dead code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike events for registered notifier, during the registration, the
errors that happened for the block being registered are not propagated
up to the caller. Make sure the error is propagated for FIB rules and
entries.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently all users of FIB notifier only cares about events in init_net.
Later in this patchset, users get interested in other namespaces too.
However, for every registered block user is interested only about one
namespace. Make the FIB notifier registration per-netns and avoid
unnecessary calls of notifier block for other namespaces.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the accounting is done per-namespace. However, devlink
instance is always in init_net namespace for now, so only the accounting
related to init_net is used. Limitations set using devlink resources
are only considered for init_net. nsim_devlink_net() always
returns init_net always.

Make the accounting per-device. This brings no functional change.
Per-device accounting has the same values as per-net.
For a single netdevsim instance, the behaviour is exactly the same
as before. When multiple netdevsim instances are created, each
can have different limits.

This is in prepare to implement proper devlink netns support. After
that, the devlink instance which would exist in particular netns would
account and limit that netns.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If netdev_name_node_head_alloc() fails to allocate
memory, we absolutely want register_netdevice() to return
-ENOMEM instead of zero :/

One of the syzbot report looked like :

general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8760 Comm: syz-executor839 Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ovs_vport_add+0x185/0x500 net/openvswitch/vport.c:205
Code: 89 c6 e8 3e b6 3a fa 49 81 fc 00 f0 ff ff 0f 87 6d 02 00 00 e8 8c b4 3a fa 4c 89 e2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 d3 02 00 00 49 8d 7c 24 08 49 8b 34 24 48 b8 00
RSP: 0018:ffff88808fe5f4e0 EFLAGS: 00010247
RAX: dffffc0000000000 RBX: ffffffff89be8820 RCX: ffffffff87385162
RDX: 0000000000000000 RSI: ffffffff87385174 RDI: 0000000000000007
RBP: ffff88808fe5f510 R08: ffff8880933c6600 R09: fffffbfff14ee13c
R10: fffffbfff14ee13b R11: ffffffff8a7709df R12: 0000000000000004
R13: ffffffff89be8850 R14: ffff88808fe5f5e0 R15: 0000000000000002
FS:  0000000001d71880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000280 CR3: 0000000096e4c000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 new_vport+0x1b/0x1d0 net/openvswitch/datapath.c:194
 ovs_dp_cmd_new+0x5e5/0xe30 net/openvswitch/datapath.c:1644
 genl_family_rcv_msg+0x74b/0xf90 net/netlink/genetlink.c:629
 genl_rcv_msg+0xca/0x170 net/netlink/genetlink.c:654
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363

Fixes: ff927412 ("net: introduce name_node struct to be used in hashlist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Oleksij Rempel says:

====================
phy: at803x: add ar9331 support

changes v3:
- use PHY_ID_MATCH_EXACT only for ATH9331 PHY

changes v2:
- use PHY_ID_MATCH_EXACT instead of leaky masking
- remove probe and struct at803x_priv
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

struct at803x_priv is never used in this driver. So remove it
and the probe function allocating it.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mostly this hardware can work with generic PHY driver, but this change
is needed to provided interrupt handling support.
Tested with dsa ar9331-switch driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently mlxsw distributes sent traffic among all the available send
queues. That includes control traffic as well as EMADs, which are used for
configuration of the device.

However because all the queues have the same traffic class of 3, they all
end up being directed to the same traffic class buffer. If the control
traffic in the buffer cannot be serviced quickly enough, the EMAD traffic
might be shut out, which causes transient failures, typically in FDB
maintenance, counter upkeep and other periodic work.

To address this issue, dedicate SDQ 0 to EMAD traffic, with TC 0.
Distribute the control traffic among the remaining queues, which are left
with their current TC 3.
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, RDS calls ib_dma_alloc_coherent() to allocate a large piece
of contiguous DMA coherent memory to store struct rds_header for
sending/receiving packets.  The memory allocated is then partitioned
into struct rds_header.  This is not necessary and can be costly at
times when memory is fragmented.  Instead, RDS should use the DMA
memory pool interface to handle this.  The DMA addresses of the pre-
allocated headers are stored in an array.  At send/receive ring
initialization and refill time, this arrary is de-referenced to get
the DMA addresses.  This array is not accessed at send/receive packet
processing.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thierry Reding says:

====================
net: stmmac: Enhanced addressing mode for DWMAC 4.10

The DWMAC 4.10 supports the same enhanced addressing mode as later
generations. Parse this capability from the hardware feature registers
and set the EAME (Enhanced Addressing Mode Enable) bit when necessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The address width of the controller can be read from hardware feature
registers much like on XGMAC. Add support for parsing the ADDR64 field
so that the DMA mask can be set accordingly.

This avoids getting swiotlb involved for DMA on Tegra186 and later.

Also make sure that the upper 32 bits of the DMA address are written to
the DMA descriptors when enhanced addressing mode is used. Similarily,
for each channel, the upper 32 bits of the DMA descriptor ring's base
address also need to be programmed to make sure the correct memory can
be fetched when the DMA descriptor ring is located beyond the 32-bit
boundary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enhanced addressing mode is only required when more than 32 bits need to
be addressed. Add a DMA configuration parameter to enable this mode only
when needed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Checkpatch throws warnings for function pointer declarations which lack
identifier names.

An example of such a warning is:

WARNING: function definition argument 'struct r8152 *' should
also have an identifier name
739: FILE: drivers/net/usb/r8152.c:739:
+               void (*init)(struct r8152 *);

So, fix those warnings by adding the identifier names.

While we are at it, also fix a character limit violation which was
causing another checkpatch warning.

Change-Id: Idec857ce2dc9592caf3173188be1660052c052ce
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Log vendor error if work requests fail. Vendor error provides
more information that is used for debugging the issue.
Signed-off-by: Sudhakar Dindukurti <sudhakar.dindukurti@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recycling in mvpp2 has gone long time ago, but two comment still refers
to it. Remove those two misleading comments as they generate confusion.

Fixes: 7ef7e1d9 ("net: mvpp2: drop useless fields in mvpp2_bm_pool and related code")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Randy Dunlap says:

====================
CAIF Kconfig fixes

This series of patches cleans up the CAIF Kconfig menus in
net/caif/Kconfig and drivers/net/caif/Kconfig and also puts the
CAIF Transport drivers into their own sub-menu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor fixes to the CAIF Transport drivers Kconfig file:

- end sentence with period
- capitalize CAIF acronym
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Isolate CAIF transport drivers into their own menu.

This cleans up the main Network device support menu,
makes it easier to find the CAIF drivers, and makes it
easier to enable/disable them as a group.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clean up the net/caif/Kconfig menu:
- remove extraneous space
- minor language tweaks
- fix punctuation
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The introduction of this schedule point was done in commit
2ba2506c ("[NET]: Add preemption point in qdisc_run")
at a time the loop was not bounded.

Then later in commit d5b8aa1d ("net_sched: fix dequeuer fairness")
we added a limit on the number of packets.

Now is the time to remove the schedule point, since the default
limit of 64 packets matches the number of packets a typical NAPI
poll can process in a row.

This solves a latency problem for most TCP receivers under moderate load :

1) host receives a packet.
   NET_RX_SOFTIRQ is raised by NIC hard IRQ handler

2) __do_softirq() does its first loop, handling NET_RX_SOFTIRQ
   and calling the driver napi->loop() function

3) TCP stores the skb in socket receive queue:

4) TCP calls sk->sk_data_ready() and wakeups a user thread
   waiting for EPOLLIN (as a result, need_resched() might now be true)

5) TCP cooks an ACK and sends it.

6) qdisc_run() processes one packet from qdisc, and sees need_resched(),
   this raises NET_TX_SOFTIRQ (even if there are no more packets in
   the qdisc)

Then we go back to the __do_softirq() in 2), and we see that new
softirqs were raised. Since need_resched() is true, we end up waking
ksoftirqd in this path :

    if (pending) {
            if (time_before(jiffies, end) && !need_resched() &&
                --max_restart)
                    goto restart;

            wakeup_softirqd();
    }

So we have many wakeups of ksoftirqd kernel threads,
and more calls to qdisc_run() with associated lock overhead.

Note that another way to solve the issue would be to change TCP
to first send the ACK packet, then signal the EPOLLIN,
but this changes P99 latencies, as sending the ACK packet
can add a long delay.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct __dsa_skb_cb is supposed to span the entire 48-byte skb
control block, while the struct dsa_skb_cb only the portion of it which
is used by the DSA core (the rest is available as private data to
drivers).

The DSA_SKB_CB and __DSA_SKB_CB helpers are supposed to help retrieve
this pointer based on a skb, but it turns out there is nobody directly
interested in the struct __dsa_skb_cb in the kernel. So remove it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
SJA1105 DSA coding style cleanup

This series provides some mechanical cleanup patches related to function
names and prototypes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The most commonly called function in the driver is long due for a
rename. The "packed" word is redundant (it doesn't make sense to
transfer an unpacked structure, since that is in CPU endianness yadda
yadda), and the "spi" word is also redundant since argument 2 of the
function is SPI_READ or SPI_WRITE.

As for the sja1105_spi_send_long_packed_buf function, it is only being
used from sja1105_spi.c, so remove its global prototype.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Having a function that takes a variable number of unpacked bytes which
it generically calls an "int" is confusing and makes auditing patches
next to impossible.

We only use spi_send_int with the int sizes of 32 and 64 bits. So just
make the spi_send_int function less generic and replace it with the
appropriate two explicit functions, which can now type-check the int
pointer type.

Note that there is still a small weirdness in the u32 function, which
has to convert it to a u64 temporary. This is because of how the packing
API works at the moment, but the weirdness is at least hidden from
callers of sja1105_xfer_u32 now.
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let the compiler decide.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paulo Alcantara says:

====================
Experimental SMB rootfs support

This patch series enables Linux to mount root file systems over the
network by utilizing SMB protocol.

Upstream commit 8eecd1c2 ("cifs: Add support for root file
systems") introduced a new CONFIG_CIFS_ROOT option, a virtual device
(Root_CIFS) and a kernel cmdline parameter "cifsroot=" which tells the
kernel to actually mount the root filesystem over a SMB share.

The feature relies on ipconfig to set up the network prior to mounting
the rootfs, so when it is set along with "cifsroot=" parameter:

    (1) cifs_root_setup() parses all necessary data out of "cifsroot="
    parameter for the init process know how to mount the SMB rootfs
    (e.g. SMB server address, mount options).

    (2) If DHCP failed for some reason in ipconfig, we keep retrying
    forever as we have nowhere to go for NFS or SMB root
    filesystems (see PATCH 2/2). Otherwise go to (3).

    (3) mount_cifs_root() is then called by mount_root() (ROOT_DEV ==
    Root_CIFS), retrieves early parsed data from (1), then attempt to
    mount SMB rootfs by CIFSROOT_RETRY_MAX times at most (see PATCH
    1/2).

    (4) If all attempts failed, fall back to floppy drive, otherwise
    continue the boot process with rootfs mounted over a SMB share.

My idea was to keep the same behavior of nfsroot - as it seems to work
for most users so far.

For more information on how this feature works, see
Documentation/filesystems/cifs/cifsroot.txt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The experimental root file system support in cifs.ko relies on
ipconfig to set up the network stack and then accessing the SMB share
that contains the rootfs files.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new virtual device named /dev/cifs (0xfe) to tell the kernel to
mount the root file system over the network by using SMB protocol.

cifs_root_data() will be responsible to retrieve the parsed
information of the new command-line option (cifsroot=) and then call
do_mount_root() with the appropriate mount options for cifs.ko.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: driver updates

These patches are a few updates to clean up some code
issues and add an ethtool feature.

v3: drop the Fixes tags as they really aren't fixing bugs
    simplify ionic_lif_quiesce() as no return is necessary

v2: add cover letter
    edit a couple of patch descriptions for clarity
      and add Fixes: tags
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Even though we've already turned off the queue activity with
the ionic_qcq_disable(), we need to wait for any device queues
that are processing packets to drain down before we try to
flush our packets and tear down the queues.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Wire up the --set-fec and --show-fec features in the ethtool
callbacks and pull the related code out of set_link_ksettings.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The user's request for an interrupt coalescing value gets
translated into a hardware value to be used with the NIC,
and was getting reported back based on the hw value, which,
due to hw tic resolution, could be reported as a different
number than what the user originally asked for.  This code
now tracks both the user request and what was put into the
hardware so we can report back to the user what they
requested.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the open-coded ionic_wait_for_bit() with the
kernel's wait_on_bit_lock().
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need for a goto in this bit of code.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: introduce per-netns netdevice notifiers and use them in mlxsw

Some drivers, like mlxsw, are not interested in notifications coming in
for netdevices from other network namespaces. So introduce per-netns
notifiers and allow to reduce overhead by listening only for
notifications from the same netns.

This is also a preparation for upcoming patchset "devlink: allow devlink
instances to change network namespace". This resolves deadlock during
reload mlxsw into initial netns made possible by
328fbe74 ("net: Close race between {un, }register_netdevice_notifier() and setup_net()/cleanup_net()").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxsw_sp instance is not interested in events happening in other
network namespaces. So use "_net" variants for netdevice notifier
registration/unregistration and get only events which are happening in
the net the instance is in.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Often the code for example in drivers is interested in getting notifier
call only from certain network namespace. In addition to the existing
global netdevice notifier chain introduce per-netns chains and allow
users to register to that. Eventually this would eliminate unnecessary
overhead in case there are many netdevices in many network namespaces.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Push iterations over net namespaces and netdevices from
register_netdevice_notifier() and unregister_netdevice_notifier()
into helper functions. Along with that introduce continue_reverse macros
to make the code a bit nicer allowing to get rid of "last" marks.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>