- 05 Jul, 2019 3 commits
-
-
Fuqian Huang authored
Several drivers cast a struct device pointer to a struct platform_device pointer only to then call platform_get_drvdata(). To improve readability, these constructs can be simplified by using dev_get_drvdata() directly. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fuqian Huang authored
Several drivers cast a struct device pointer to a struct platform_device pointer only to then call platform_get_drvdata(). To improve readability, these constructs can be simplified by using dev_get_drvdata() directly. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2019-07-05 1) A lot of work to remove indirections from the xfrm code. From Florian Westphal. 2) Fix a WARN_ON with ipv6 that triggered because of a forgotten break statement. From Florian Westphal. 3) Remove xfrmi_init_net, it is not needed. From Li RongQing. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Jul, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-07-03 The following pull-request contains BPF updates for your *net-next* tree. There is a minor merge conflict in mlx5 due to 8960b389 ("linux/dim: Rename externally used net_dim members") which has been pulled into your tree in the meantime, but resolution seems not that bad ... getting current bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed just so he's aware of the resolution below: ** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD static int mlx5e_open_cq(struct mlx5e_channel *c, struct dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) ======= int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder, struct mlx5e_cq_param *param, struct mlx5e_cq *cq) >>>>>>> e5a3e259 Resolution is to take the second chunk and rename net_dim_cq_moder into dim_cq_moder. Also the signature for mlx5e_open_cq() in ... drivers/net/ethernet/mellanox/mlx5/core/en.h +977 ... and in mlx5e_open_xsk() ... drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64 ... needs the same rename from net_dim_cq_moder into dim_cq_moder. ** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c: <<<<<<< HEAD int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix)); struct dim_cq_moder icocq_moder = {0, 0}; struct net_device *netdev = priv->netdev; struct mlx5e_channel *c; unsigned int irq; ======= struct net_dim_cq_moder icocq_moder = {0, 0}; >>>>>>> e5a3e259 Take the second chunk and rename net_dim_cq_moder into dim_cq_moder as well. Let me know if you run into any issues. Anyway, the main changes are: 1) Long-awaited AF_XDP support for mlx5e driver, from Maxim. 2) Addition of two new per-cgroup BPF hooks for getsockopt and setsockopt along with a new sockopt program type which allows more fine-grained pass/reject settings for containers. Also add a sock_ops callback that can be selectively enabled on a per-socket basis and is executed for every RTT to help tracking TCP statistics, both features from Stanislav. 3) Follow-up fix from loops in precision tracking which was not propagating precision marks and as a result verifier assumed that some branches were not taken and therefore wrongly removed as dead code, from Alexei. 4) Fix BPF cgroup release synchronization race which could lead to a double-free if a leaf's cgroup_bpf object is released and a new BPF program is attached to the one of ancestor cgroups in parallel, from Roman. 5) Support for bulking XDP_TX on veth devices which improves performance in some cases by around 9%, from Toshiaki. 6) Allow for lookups into BPF devmap and improve feedback when calling into bpf_redirect_map() as lookup is now performed right away in the helper itself, from Toke. 7) Add support for fq's Earliest Departure Time to the Host Bandwidth Manager (HBM) sample BPF program, from Lawrence. 8) Various cleanups and minor fixes all over the place from many others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
René van Dorst authored
Both MTK_TRGMII_MT7621_CLK and MTK_PATH_BIT are defined as bit 10. This can causes issues on non-MT7621 devices which has the MTK_PATH_BIT(MTK_ETH_PATH_GMAC1_RGMII) and MTK_TRGMII capability set. The wrong TRGMII setup code can be executed. The current wrongly executed code doesn’t do any harm on MT7623 and the TRGMII setup for the MT7623 SOC side is done in MT7530 driver So it wasn’t noticed in the test. Move all capability bits in one enum so that they are all unique and easy to expand in the future. Because mtk_eth_path enum is merged in to mkt_eth_capabilities, the variable path value is no longer between 0 to number of paths, mtk_eth_path_name can’t be used anymore in this form. Convert the mtk_eth_path_name array to a function to lookup the pathname. The old code walked thru the mtk_eth_path enum, which is also merged with mkt_eth_capabilities. Expand array mtk_eth_muxc so it can store the name and capability bit of the mux. Convert the code so it can walk thru the mtk_eth_muxc array. Fixes: 8efaa653 ("net: ethernet: mediatek: Add MT7621 TRGMII mode support") Signed-off-by: René van Dorst <opensource@vdorst.com> v1->v2: - Move all capability bits in one enum, suggested by Willem de Bruijn - Convert the mtk_eth_path_name array to a function to lookup the pathname - Expand array mtk_eth_muxc so it can also store the name and capability bit of the mux - Updated commit message Signed-off-by: David S. Miller <davem@davemloft.net>
-
Weifeng Voon authored
Enable GMAC v4.xx and beyond to support 16KiB buffer. Signed-off-by: Weifeng Voon <weifeng.voon@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vincent Bernat authored
Currently, gratuitous ARP/ND packets are sent every `miimon' milliseconds. This commit allows a user to specify a custom delay through a new option, `peer_notif_delay'. Like for `updelay' and `downdelay', this delay should be a multiple of `miimon' to avoid managing an additional work queue. The configuration logic is copied from `updelay' and `downdelay'. However, the default value cannot be set using a module parameter: Netlink or sysfs should be used to configure this feature. When setting `miimon' to 100 and `peer_notif_delay' to 500, we can observe the 500 ms delay is respected: 20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 In bond_mii_monitor(), I have tried to keep the lock logic readable. The change is due to the fact we cannot rely on a notification to lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is only triggered once every N times, while we need to decrement the counter each time. iproute2 also needs to be updated to be able to specify this new attribute through `ip link'. Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The variable err is being assigned with a value that is never read and it is being updated in the next statement with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Jul, 2019 26 commits
-
-
Colin Ian King authored
Currently the check to see if a page is allocated is incorrect and is checking if the pointer page is null, not *page as intended. Fix this. Addresses-Coverity: ("Dereference before null check") Fixes: f5cedc84 ("gve: Add transmit and receive support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Paolo Abeni says: ==================== net: use ICW for sk_proto->{send,recv}msg This series extends ICW usage to one of the few remaining spots in fast-path still hitting per packet retpoline overhead, namely the sk_proto->{send,recv}msg calls. The first 3 patches in this series refactor the existing code so that applying the ICW macros is straight-forward: we demux inet_{recv,send}msg in ipv4 and ipv6 variants so that each of them can easily select the appropriate TCP or UDP direct call. While at it, a new helper is created to avoid excessive code duplication, and the current ICWs for inet_{recv,send}msg are adjusted accordingly. The last 2 patches really introduce the new ICW use-case, respectively for the ipv6 and the ipv4 code path. This gives up to 5% performance improvement under UDP flood, and smaller but measurable gains for TCP RR workloads. v1 -> v2: - drop inet6_{recv,send}msg declaration from header file, prefer ICW macro instead - avoid unneeded reclaration for udp_sendmsg, as suggested by Willem ==================== Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This avoids an indirect call per syscall for common ipv4 transports v1 -> v2: - avoid unneeded reclaration for udp_sendmsg, as suggested by Willem Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This avoids an indirect call per syscall for common ipv6 transports Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
After the previous patch we have ipv{6,4} variants for {recv,send}msg, we should use the generic _INET ICW variant to call into the proper build-in. This also allows dropping the now unused and rather ugly _INET4 ICW macro v1 -> v2: - use ICW macro to declare inet6_{recv,send}msg - fix a couple of checkpatch offender in the code context Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This will simplify indirect call wrapper invocation in the following patch. No functional change intended, any - out-of-tree - IPv6 user of inet_{recv,send}msg can keep using the existing functions. SCTP code still uses the existing version even for ipv6: as this series will not add ICW for SCTP, moving to the new helper would not give any benefit. The only other in-kernel user of inet_{recv,send}msg is pvcalls_conn_back_read(), but psvcalls explicitly creates only IPv4 socket, so no need to update that code path, too. v1 -> v2: drop inet6_{recv,send}msg declaration from header file, prefer ICW macro instead Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The same code is replicated verbatim in multiple places, and the next patches will introduce an additional user for it. Factor out a helper and use it where appropriate. No functional change intended. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The variable tpd_req is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
This patch adds driver changes to detect/timestamp the unicast PTP packets. Changes from previous version: ------------------------------- v2: Defined a macro for unicast ptp param mask. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Catherine Sullivan authored
u64_stats_fetch_begin needs to initialize start. Signed-off-by: Catherine Sullivan <csully@google.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
dev_init_scheduler() and dev_activate() expect the caller to hold RTNL. Since we don't want blackhole device to be initialized per ns, we are initializing at init. [ 3.855027] Call Trace: [ 3.855034] dump_stack+0x67/0x95 [ 3.855037] lockdep_rcu_suspicious+0xd5/0x110 [ 3.855044] dev_init_scheduler+0xe3/0x120 [ 3.855048] ? net_olddevs_init+0x60/0x60 [ 3.855050] blackhole_netdev_init+0x45/0x6e [ 3.855052] do_one_initcall+0x6c/0x2fa [ 3.855058] ? rcu_read_lock_sched_held+0x8c/0xa0 [ 3.855066] kernel_init_freeable+0x1e5/0x288 [ 3.855071] ? rest_init+0x260/0x260 [ 3.855074] kernel_init+0xf/0x180 [ 3.855076] ? rest_init+0x260/0x260 [ 3.855078] ret_from_fork+0x24/0x30 Fixes: 4de83b88 ("loopback: create blackhole net device similar to loopack.") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Stanislav Fomichev says: ==================== Congestion control team would like to have a periodic callback to track some TCP statistics. Let's add a sock_ops callback that can be selectively enabled on a socket by socket basis and is executed for every RTT. BPF program frequency can be further controlled by calling bpf_ktime_get_ns and bailing out early. I run neper tcp_stream and tcp_rr tests with the sample program from the last patch and didn't observe any noticeable performance difference. v2: * add a comment about second accept() in selftest (Yonghong Song) * refer to tcp_bpf.readme in sample program (Yonghong Song) ==================== Suggested-by: Eric Dumazet <edumazet@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Copy-paste, should be detach, not attach. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Uses new RTT callback to dump stats every second. $ mkdir -p /tmp/cgroupv2 $ mount -t cgroup2 none /tmp/cgroupv2 $ mkdir -p /tmp/cgroupv2/foo $ echo $$ >> /tmp/cgroupv2/foo/cgroup.procs $ bpftool prog load ./tcp_dumpstats_kern.o /sys/fs/bpf/tcp_prog $ bpftool cgroup attach /tmp/cgroupv2/foo sock_ops pinned /sys/fs/bpf/tcp_prog $ bpftool prog tracelog $ # run neper/netperf/etc Used neper to compare performance with and without this program attached and didn't see any noticeable performance impact. Sample output: <idle>-0 [015] ..s. 2074.128800: 0: dsack_dups=0 delivered=242526 <idle>-0 [015] ..s. 2074.128808: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [015] ..s. 2075.130133: 0: dsack_dups=0 delivered=323599 <idle>-0 [015] ..s. 2075.130138: 0: delivered_ce=0 icsk_retransmits=0 <idle>-0 [005] .Ns. 2076.131440: 0: dsack_dups=0 delivered=404648 <idle>-0 [005] .Ns. 2076.131447: 0: delivered_ce=0 icsk_retransmits=0 Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Make sure the callback is invoked for syn-ack and data packet. Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Sync new bpf_tcp_sock fields and new BPF_PROG_TYPE_SOCK_OPS RTT callback. Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Add some inet_connection_sock fields to bpf_tcp_sock that might be useful for debugging congestion control issues. Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Add more fields to bpf_tcp_sock that might be useful for debugging congestion control issues. Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
We've added bpf_tcp_sock member to bpf_sock_ops and don't expect any new tcp_sock fields in bpf_sock_ops. Let's remove CONVERT_COMMON_TCP_SOCK_FIELDS so bpf_tcp_sock can be independently extended. Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Stanislav Fomichev authored
Performance impact should be minimal because it's under a new BPF_SOCK_OPS_RTT_CB_FLAG flag that has to be explicitly enabled. Suggested-by: Eric Dumazet <edumazet@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Priyaranjan Jha <priyarjha@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Jiri Benc authored
The progs for bpf selftests use several different notations to force function inlining. Standardize to what most of them use, static __always_inline. Suggested-by: Song Liu <liu.song.a23@gmail.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
brakmo authored
Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth Manager). Includes a new BPF program supporting EDT, and also updates corresponding programs. It will drop packets with an EDT of more than 500us in the future unless the packet belongs to a flow with less than 2 packets in flight. This is done so each flow has at least 2 packets in flight, so they will not starve, and also to help prevent delayed ACK timeouts. It will also work with ECN enabled traffic, where the packets will be CE marked if their EDT is more than 50us in the future. The table below shows some performance numbers. The flows are back to back RPCS. One server sending to another, either 2 or 4 flows. One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more than one flow of a given RPC size, the numbers represent averages. The rate limit applies to all flows (they are in the same cgroup). Tests ending with "-edt" ran with the new BPF program supporting EDT. Tests ending with "-hbt" ran on top HBT qdisc with the specified rate (i.e. no HBM). The other tests ran with the HBM BPF program included in the HBM patch-set. EDT has limited value when using DCTCP, but it helps in many cases when using Cubic. It usually achieves larger link utilization and lower 99% latencies for the 1MB RPCs. HBM ends up queueing a lot of packets with its default parameter values, reducing the goodput of the 10KB RPCs and increasing their latency. Also, the RTTs seen by the flows are quite large. Aggr 10K 10K 10K 1MB 1MB 1MB Limit rate drops RTT rate P90 P99 rate P90 P99 Test rate Flows Mbps % us Mbps us us Mbps ms ms -------- ---- ----- ---- ----- --- ---- ---- ---- ---- ---- ---- cubic 1G 2 904 0.02 108 257 511 539 647 13.4 24.5 cubic-edt 1G 2 982 0.01 156 239 656 967 743 14.0 17.2 dctcp 1G 2 977 0.00 105 324 408 744 653 14.5 15.9 dctcp-edt 1G 2 981 0.01 142 321 417 811 660 15.7 17.0 cubic-htb 1G 2 919 0.00 1825 40 2822 4140 879 9.7 9.9 cubic 200M 2 155 0.30 220 81 532 655 74 283 450 cubic-edt 200M 2 188 0.02 222 87 1035 1095 101 84 85 dctcp 200M 2 188 0.03 111 77 912 939 111 76 325 dctcp-edt 200M 2 188 0.03 217 74 1416 1738 114 76 79 cubic-htb 200M 2 188 0.00 5015 8 14ms 15ms 180 48 50 cubic 1G 4 952 0.03 110 165 516 546 262 38 154 cubic-edt 1G 4 973 0.01 190 111 1034 1314 287 65 79 dctcp 1G 4 951 0.00 103 180 617 905 257 37 38 dctcp-edt 1G 4 967 0.00 163 151 732 1126 272 43 55 cubic-htb 1G 4 914 0.00 3249 13 7ms 8ms 300 29 34 cubic 5G 4 4236 0.00 134 305 490 624 1310 10 17 cubic-edt 5G 4 4865 0.00 156 306 425 759 1520 10 16 dctcp 5G 4 4936 0.00 128 485 221 409 1484 7 9 dctcp-edt 5G 4 4924 0.00 148 390 392 623 1508 11 26 v1 -> v2: Incorporated Andrii's suggestions v2 -> v3: Incorporated Yonghong's suggestions v3 -> v4: Removed credit update that is not needed Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Leo Yan authored
Based on the following report from Smatch, fix the potential NULL pointer dereference check: tools/lib/bpf/libbpf.c:3493 bpf_prog_load_xattr() warn: variable dereferenced before check 'attr' (see line 3483) 3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr, 3480 struct bpf_object **pobj, int *prog_fd) 3481 { 3482 struct bpf_object_open_attr open_attr = { 3483 .file = attr->file, 3484 .prog_type = attr->prog_type, ^^^^^^ 3485 }; At the head of function, it directly access 'attr' without checking if it's NULL pointer. This patch moves the values assignment after validating 'attr' and 'attr->file'. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Andrii Nakryiko authored
GCC8 started emitting warning about using strncpy with number of bytes exactly equal destination size, which is generally unsafe, as can lead to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number of bytes to ensure name is always zero-terminated. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
Alexei Starovoitov authored
When equivalent state is found the current state needs to propagate precision marks. Otherwise the verifier will prune the search incorrectly. There is a price for correctness: before before broken fixed cnst spill precise precise bpf_lb-DLB_L3.o 1923 8128 1863 1898 bpf_lb-DLB_L4.o 3077 6707 2468 2666 bpf_lb-DUNKNOWN.o 1062 1062 544 544 bpf_lxc-DDROP_ALL.o 166729 380712 22629 36823 bpf_lxc-DUNKNOWN.o 174607 440652 28805 45325 bpf_netdev.o 8407 31904 6801 7002 bpf_overlay.o 5420 23569 4754 4858 bpf_lxc_jit.o 39389 359445 50925 69631 Overall precision tracking is still very effective. Fixes: b5dc0163 ("bpf: precise scalar_value tracking") Reported-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Tested-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
- 02 Jul, 2019 6 commits
-
-
Petr Machata authored
Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates whether the corresponding port is still valid. However the condition is incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to compare it to skb->dev. The condition needs to check whether the port is present and skb->dev still refers to that port (or else is NULL). If that does not hold, bail out. Add a pair of parentheses to fix the condition. Fixes: d92e4e6e ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
It was reported that the GPD MicroPC is broken in a way that no valid MAC address can be read from the network chip. The vendor driver deals with this by assigning a random MAC address as fallback. So let's do the same. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This reverts commit 759d0957. The patch was based on a misunderstanding. As Al Viro pointed out [0] it's simply wrong on big endian. So let's revert it. [0] https://marc.info/?t=156200975600004&r=1&w=2Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Blumenstingl authored
Commit 760f1dc2 ("net: stmmac: add sanity check to device_property_read_u32_array call") introduced error checking of the device_property_read_u32_array() call in stmmac_mdio_reset(). This results in the following error when the "snps,reset-delays-us" property is not defined in devicetree: invalid property snps,reset-delays-us This sanity check made sense until commit 84ce4d0f ("net: stmmac: initialize the reset delay array") ensured that there are fallback values for the reset delay if the "snps,reset-delays-us" property is absent. That was at the cost of making that property mandatory though. Drop the sanity check for device_property_read_u32_array() and thus make the "snps,reset-delays-us" property optional again (avoiding the error message while loading the stmmac driver with a .dtb where the property is absent). Fixes: 760f1dc2 ("net: stmmac: add sanity check to device_property_read_u32_array call") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
A bonding master can be up while best_slave is NULL. [12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1 [12105.648984] IP: bond_select_active_slave+0x125/0x250 [12105.653977] PGD 0 P4D 0 [12105.656572] Oops: 0000 [#1] SMP PTI [12105.660487] gsmi: Log Shutdown Reason 0x03 [12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel] [12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2 [12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1 [12105.685700] mlx4_en: eth2: Link Up (linkstate) [12105.724452] Workqueue: bond0 bond_mii_monitor [12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250 [12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246 [12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000 [12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000 [12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600 [12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000 [12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000 [12105.775748] FS: 0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000 [12105.783892] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0 [12105.796976] Call Trace: [12105.799446] [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0 [12105.805317] [<ffffffffabd42643>] process_one_work+0x143/0x370 [12105.811225] [<ffffffffabd42c7a>] worker_thread+0x4a/0x360 [12105.816761] [<ffffffffabd48bc5>] kthread+0x105/0x140 [12105.821865] [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380 [12105.827757] [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0 [12105.834266] [<ffffffffac600241>] ret_from_fork+0x51/0x60 Fixes: e2a7420d ("bonding/main: convert to using slave printk macros") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: John Sperbeck <jsperbeck@google.com> Cc: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Both tipc_udp_enable and tipc_udp_disable are called under rtnl_lock, ub->ubsock could never be NULL in tipc_udp_disable and cleanup_bearer, so remove the check. Also remove the one in tipc_udp_enable by adding "free" label. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-