It is not immediately obvious that this driver allocates, via the
KSZ_REGMAP_TABLE() macro, 3 regmaps for register access: dev->regmap[0]
for 8-bit access, dev->regmap[1] for 16-bit and dev->regmap[2] for
32-bit access.

In future changes that add support for reg_fields, each field will have
to specify through which of the 3 regmaps it's going to go. Add an enum
now, to denote one of the 3 register access widths, and make the code go
through some wrapper functions for easier review and further
modification.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch refines the error handling mechanism for 8-bit register
read-modify-write operations. In case of a failure, it now logs an error
message detailing the problematic offset. This enhancement aids in
debugging by providing more precise information when these operations
encounter issues.

Furthermore, the ksz_prmw8() function has been updated to return error
values rather than void, enabling calling functions to appropriately
respond to errors.

Additionally, in case of an error that affects both the current and
future accesses, the PHY driver will log the errors consistently, akin
to the existing behavior in all ksz_read*/ksz_write* helpers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Donald Hunter says:

====================
netlink: specs: add ynl spec for ovs_flow

Add a ynl specification for ovs_flow. The spec is sufficient to dump ovs
flows but some attrs have been left as binary blobs because ynl doesn't
support C arrays in struct definitions yet.

Patches 1-3 add features for genetlink-legacy specs
Patch 4 is the ovs_flow netlink spec
====================

Link: https://lore.kernel.org/r/20230527133107.68161-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a ynl specification for ovs_flow. This spec is sufficient to dump ovs
flows. Some attrs are left as binary blobs because ynl doesn't support C
arrays in struct definitions yet.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Support decoding scalars as enums in struct members for genetlink-legacy
specs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This eliminates the need for e.g. --json '{"dp-ifindex":0}' which is not
too big a deal for ovs but will get tiresome for fixed header structs that
have many members.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make it possible to document the meaning of struct member attributes in
genetlink-legacy specs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make some minor spelling corrections in comments.

Found by inspection.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230526-devlink-spelling-v1-1-9a3e36cdebc8@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The "len" variable needs to be signed for the error handling to work
correctly.

Fixes: 2e910b95 ("net: Add a function to splice pages into an skbuff for MSG_SPLICE_PAGES")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/366861a7-87c8-4bbf-9101-69dd41021d07@kili.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than using put_device(&mdiodev->dev), use the proper interface
provided to dispose of the mdiodev - that being mdio_device_free().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/E1q2VsB-008QlZ-El@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
net: pcs: add helpers to xpcs and lynx to manage mdiodev

This morning, we have had two instances where the destruction of the
MDIO device associated with XPCS and Lynx has been wrong. Rather than
allowing this pattern of errors to continue, let's make it easier for
driver authors to get this right by adding a helper.

The changes are essentially:

1. Add two new mdio device helpers to manage the underlying struct
   device reference count. Note that the existing mdio_device_free()
   doesn't actually free anything, it merely puts the reference count.

2. Make the existing _create() and _destroy() PCS driver methods
   increment and decrement this refcount using these helpers. This
   results in no overall change, although drivers may hang on to
   the mdio device for a few cycles longer.

3. Add _create_mdiodev() which creates the mdio device before calling
   the existing _create() method. Once the _create() method has
   returned, we put the reference count on the mdio device.

   If _create() was successful, then the reference count taken there
   will "hold" the mdio device for the lifetime of the PCS (in other
   words, until _destroy() is called.) However, if _create() failed,
   then dropping the refcount at this point will free the mdio device.

   This is the exact behaviour we desire.

4. Convert users that create a mdio device and then call the PCS's
   _create() method over to the new _create_mdiodev() method, and
   simplify the cleanup.

We also have DPAA2 and fmem_memac that look up their PCS rather than
creating it. These could also drop their reference count on the MDIO
device immediately after calling lynx_pcs_create(), which would then
mean we wouldn't need lynx_get_mdio_device() and the associated
complexity to put the device in dpaa2_pcs_destroy() and pcs_put().
Note that DPAA2 bypasses the mdio device's abstractions by calling
put_device() directly.
====================

Link: https://lore.kernel.org/r/ZHCGZ8IgAAwr8bla@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the newly introduced lynx_pcs_create_mdiodev() which simplifies the
creation and destruction of the lynx PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the newly introduced lynx_pcs_create_mdiodev() which simplifies the
creation and destruction of the lynx PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add lynx_pcs_create_mdiodev() to simplify the creation of the mdio
device associated with lynx PCS. In order to allow lynx_pcs_destroy()
to clean this up, we need to arrange for lynx_pcs_create() to take a
refcount on the mdiodev, and lynx_pcs_destroy() to put it.

Adding the refcounting to lynx_pcs_create()..lynx_pcs_destroy() will
be transparent to existing users of these interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the new xpcs_create_mdiodev() creator, which simplifies the
creation and destruction of the mdio device associated with xpcs.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add xpcs_create_mdiodev() to simplify the creation of the mdio device
associated with the XPCS. In order to allow xpcs_destroy() to clean
this up, we need to arrange for xpcs_create() to take a refcount on
the mdiodev, and xpcs_destroy() to put it.

Adding the refcounting to xpcs_create()..xpcs_destroy() will be
transparent to existing users of these interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add two new operations for a mdio device to manage the refcount on the
underlying struct device. This will be used by mdio PCS drivers to
simplify the creation and destruction handling, making it easier for
users to get it correct.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-05-26

We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).

The main changes are:

1) Add the capability to destroy sockets in BPF through a new kfunc,
   from Aditi Ghag.

2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
   from Andrii Nakryiko.

3) Add capability for libbpf to resize datasec maps when backed via mmap,
   from JP Kobryn.

4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
   from Jiri Olsa.

5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
   from Magnus Karlsson.

6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
   via bpftool, from Yafang Shao.

7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
   from Yonghong Song.

8) Extend bpftool to specify netdevice for resolving XDP hints,
   from Larysa Zaremba.

9) Document masking in shift operations for the insn set document,
   from Dave Thaler.

10) Extend BPF selftests to check xdp_feature support for bond driver,
    from Lorenzo Bianconi.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
  bpf: Fix bad unlock balance on freeze_mutex
  libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
  libbpf: Ensure libbpf always opens files with O_CLOEXEC
  selftests/bpf: Check whether to run selftest
  libbpf: Change var type in datasec resize func
  bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
  libbpf: Selftests for resizing datasec maps
  libbpf: Add capability for resizing datasec maps
  selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
  libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
  bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
  libbpf: Start v1.3 development cycle
  bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
  bpftool: Specify XDP Hints ifname when loading program
  selftests/bpf: Add xdp_feature selftest for bond device
  selftests/bpf: Test bpf_sock_destroy
  selftests/bpf: Add helper to get port using getsockname
  bpf: Add bpf_sock_destroy kfunc
  bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
  bpf: udp: Implement batching for sockets iterator
  ...
====================

Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In order to have our interrupt descriptor fully setup and in particular
the action, ensure that we register a full fledged interrupt handler.
This also allow us to set the interrupt polarity and flow through the
same call.

This is specifically necessary for kernel/irq/pm.c::suspend_device_irq
to set the interrupt descriptor to the IRQD_WAKEUP_ARMED state and
enable the interrupt for wake-up since it was still in a disabled state.

Without an interrupt descriptor we would have ran into cases where the
wake-up interrupt is not capable of waking up the system, specifically
if we resumed the system ACPI S5 using the Ethernet PHY. In that case
the Ethernet PHY interrupt would be pending by the time the kernel
booted, which it would acknowledge but then we could never use it as
a wake-up source again.

Fixes: 8baddaa9 ("net: phy: broadcom: Add support for Wake-on-LAN")
Suggested-by: Doug Berger <doug.berger@broadcom.com>
Debugged-by: Doug Berger <doug.berger@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently TCP_SYNQ_INTERVAL is defined but never used.

According to "git log -S TCP_SYNQ_INTERVAL net-next/main" it seems
the last references to TCP_SYNQ_INTERVAL were removed by 2015
commit fa76ce73 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit c4c84f6f ("bpf: drop unnecessary bpf_capable() check in
BPF_MAP_FREEZE command") moved the permissions check outside of the
freeze_mutex in the map_freeze() handler. The error paths still jumps
to the err_put which tries to unlock the freeze_mutex even though it
was not locked in the first place. Fix it.

Fixes: c4c84f6f ("bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command")
Reported-by: syzbot+8982e75c2878b9ffeac5@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Improve bpf_map__reuse_fd() logic and ensure that dup'ed map FD is
"good" (>= 3) and has O_CLOEXEC flags. Use fcntl(F_DUPFD_CLOEXEC) for
that, similarly to ensure_good_fd() helper we already use in low-level
APIs that work with bpf() syscall.
Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-2-andrii@kernel.org

Make sure that libbpf code always gets FD with O_CLOEXEC flag set,
regardless if file is open through open() or fopen(). For the latter
this means to add "e" to mode string, which is supported since pretty
ancient glibc v2.7.

Also drop the outdated TODO comment in usdt.c, which was already completed.
Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-1-andrii@kernel.org

Russell King says:

====================
net: dsa: mv88e6xxx: prepare for phylink_pcs conversion

These two patches provide some preparation for converting the mv88e6xxx
DSA driver to use phylink_pcs rather than bolting the serdes bits into
the MAC calls.

In order to correctly drive mv88e6xxx hardware when the PCS code is
split, we need to force the link down while changing the configuration
of a port. This is provided for via the mac_prepare() and mac_finish()
methods, but DSA does not forward these on to DSA drivers.

Patch 1 adds support to the DSA core to forward these two methods to
DSA drivers, and patch 2 moves the code from mv88e6xxx_mac_config()
into the respective methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.

Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To keep things simple we used to include the uAPI header
in the kernel in the #include <linux/$family.h> format.
This works well enough, most of the genl families should
have headers in include/net/ so linux/$family.h ends up
referring to the uAPI header, anyway. And if it doesn't
no big deal, we'll just include more info than we need.

Unless that is there is a naming conflict. Someone recently
created include/linux/psp.h which will be a problem when
supporting the PSP protocol. (I'm talking about
work-in-progress patches, but it's just a proof that assuming
lack of name conflicts was overly optimistic.)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When fewer VIs are allocated than what is allowed we can readjust
the channels by calling efx_mcdi_alloc_vis() again.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Busy polling is currently not allowed on PREEMPT_RT, because it disables
preemption while invoking the NAPI callback. It is not possible to acquire
sleeping locks with disabled preemption. For details see commit
20ab39d1 ("net/core: disable NET_RX_BUSY_POLL on PREEMPT_RT").

However, strict cyclic and/or low latency network applications may prefer busy
polling e.g., using AF_XDP instead of interrupt driven communication.

The preempt_disable() is used in order to prevent the poll_owner and NAPI owner
to be preempted while owning the resource to ensure progress. Netpoll performs
busy polling in order to acquire the lock. NAPI is locked by setting the
NAPIF_STATE_SCHED flag. There is no busy polling if the flag is set and the
"owner" is preempted. Worst case is that the task owning NAPI gets preempted and
NAPI processing stalls.  This is can be prevented by properly prioritising the
tasks within the system.

Allow RX_BUSY_POLL on PREEMPT_RT if NETPOLL is disabled. Don't disable
preemption on PREEMPT_RT within the busy poll loop.

Tested on x86 hardware with v6.1-RT and v6.3-RT on Intel i225 (igc) with
AF_XDP/ZC sockets configured to run in busy polling mode.
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Lee Jones says:

====================
Immutable branch between LEDs and netdev due for the v6.5 merge window

Andrew Lunn says:

  Christian Marangi and I will be continuing the work of offloading LED
  blinking to Ethernet MAC and PHY LED controllers. The next set of
  patches is again cross subsystem, LEDs and netdev. It also requires
  some patches you have in for-leds-next:

  a286befc24e8 leds: trigger: netdev: Use mutex instead of spinlocks
  509412749002 leds: trigger: netdev: Convert device attr to macro
  0fd93ac85826 leds: trigger: netdev: Rename add namespace to netdev trigger enum modes
  eb31ca4531a0 leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from mode
  3fc498cf54b4 leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename

  I'm assuming the new series will get nerged via netdev, with your
  Acked-by. Could you create a stable branch with these patches which
  can be pulled into netdev?

* tag 'ib-leds-netdev-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
  leds: trigger: netdev: Use mutex instead of spinlocks
  leds: trigger: netdev: Convert device attr to macro
  leds: trigger: netdev: Rename add namespace to netdev trigger enum modes
  leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from mode
  leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename
====================

Link: https://lore.kernel.org/r/20230525111521.GA411262@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

net/ipv4/raw.c
  3632679d ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")
  c85be08f ("raw: Stop using RTO_ONLINK.")
https://lore.kernel.org/all/20230525110037.2b532b83@canb.auug.org.au/

Adjacent changes:

drivers/net/ethernet/freescale/fec_main.c
  9025944f ("net: fec: add dma_wmb to ensure correct descriptor values")
  144470c8 ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The sockopt test invokes test__start_subtest and then unconditionally
asserts the success. That means that even if deny-listed, any test will
still run and potentially fail.
Evaluate the return value of test__start_subtest() to achieve the
desired behavior, as other tests do.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230525232248.640465-1-deso@posteo.net

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and bpf.

  Current release - regressions:

   - net: fix skb leak in __skb_tstamp_tx()

   - eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs

  Current release - new code bugs:

   - handshake:
      - fix sock->file allocation
      - fix handshake_dup() ref counting

   - bluetooth:
      - fix potential double free caused by hci_conn_unlink
      - fix UAF in hci_conn_hash_flush

  Previous releases - regressions:

   - core: fix stack overflow when LRO is disabled for virtual
     interfaces

   - tls: fix strparser rx issues

   - bpf:
      - fix many sockmap/TCP related issues
      - fix a memory leak in the LRU and LRU_PERCPU hash maps
      - init the offload table earlier

   - eth: mlx5e:
      - do as little as possible in napi poll when budget is 0
      - fix using eswitch mapping in nic mode
      - fix deadlock in tc route query code

  Previous releases - always broken:

   - udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()

   - raw: fix output xfrm lookup wrt protocol

   - smc: reset connection when trying to use SMCRv2 fails

   - phy: mscc: enable VSC8501/2 RGMII RX clock

   - eth: octeontx2-pf: fix TSOv6 offload

   - eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"

* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
  net: phy: mscc: enable VSC8501/2 RGMII RX clock
  net: phy: mscc: remove unnecessary phydev locking
  net: phy: mscc: add support for VSC8501
  net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
  net/handshake: Enable the SNI extension to work properly
  net/handshake: Unpin sock->file if a handshake is cancelled
  net/handshake: handshake_genl_notify() shouldn't ignore @flags
  net/handshake: Fix uninitialized local variable
  net/handshake: Fix handshake_dup() ref counting
  net/handshake: Remove unneeded check from handshake_dup()
  ipv6: Fix out-of-bounds access in ipv6_find_tlv()
  net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
  docs: netdev: document the existence of the mail bot
  net: fix skb leak in __skb_tstamp_tx()
  r8169: Use a raw_spinlock_t for the register locks.
  page_pool: fix inconsistency for page_pool_ring_[un]lock()
  bpf, sockmap: Test progs verifier error with latest clang
  bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
  bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
  ...

This changes a local variable type that stores a new array id to match
the return type of btf__add_array().
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230525001323.8554-1-inwardvessel@gmail.com

Pull power supply fixes from Sebastian Reichel:

 - Fix power_supply_get_battery_info for devices without parent devices
   resulting in NULL pointer dereference

 - Fix desktop systems reporting to run on battery once a power-supply
   device with device scope appears (e.g. a HID keyboard with a battery)

 - Ratelimit debug print about driver not providing data

 - Fix race condition related to external_power_changed in multiple
   drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx)

 - Fix LED trigger switching from blinking to solid-on when charging
   finishes

 - Fix multiple races in bq27xxx battery driver

 - mt6360: handle potential ENOMEM from devm_work_autocancel

 - sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit

 - rt9467: avoid passing 0 to dev_err_probe

* tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits)
  power: supply: Fix logic checking if system is running from battery
  power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe
  power: supply: sbs-charger: Fix INHIBITED bit for Status reg
  power: supply: rt9467: Fix passing zero to 'dev_err_probe'
  power: supply: Ratelimit no data debug output
  power: supply: Fix power_supply_get_battery_info() if parent is NULL
  power: supply: bq24190: Call power_supply_changed() after updating input current
  power: supply: bq25890: Call power_supply_changed() after updating input current or voltage
  power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
  power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
  power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes
  power: supply: bq27xxx: Move bq27xxx_battery_update() down
  power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()
  power: supply: bq27xxx: Fix poll_interval handling and races on remove
  power: supply: bq27xxx: Fix I2C IRQ race on remove
  power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
  power: supply: leds: Fix blink to LED on transition
  power: supply: sc27xx: Fix external_power_changed race
  power: supply: bq25890: Fix external_power_changed race
  power: supply: axp288_fuel_gauge: Fix external_power_changed race
  ...

Seems like that extra bpf_capable() check in BPF_MAP_FREEZE handler was
unintentionally left when we switched to a model that all BPF map
operations should be allowed regardless of CAP_BPF (or any other
capabilities), as long as process got BPF map FD somehow.

This patch replaces bpf_capable() check in BPF_MAP_FREEZE handler with
writeable access check, given conceptually freezing the map is modifying
it: map becomes unmodifiable for subsequent updates.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230524225421.1587859-2-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes:

   - HD-audio runtime PM bug fix

   - A couple of HD-audio quirks

   - Fix series of ASoC Intel AVS drivers

   - ASoC DPCM fix for a bug found on new Intel systems

   - A few other ASoC device-specific small fixes"

* tag 'sound-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable headset onLenovo M70/M90
  ASoC: dwc: move DMA init to snd_soc_dai_driver probe()
  ASoC: cs35l41: Fix default regmap values for some registers
  ALSA: hda: Fix unhandled register update during auto-suspend period
  ASoC: dt-bindings: tlv320aic32x4: Fix supply names
  ASoC: Intel: avs: Add missing checks on FE startup
  ASoC: Intel: avs: Fix avs_path_module::instance_id size
  ASoC: Intel: avs: Account for UID of ACPI device
  ASoC: Intel: avs: Fix declaration of enum avs_channel_config
  ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg
  ASoC: Intel: avs: Access path components under lock
  ASoC: Intel: avs: Fix module lookup
  ALSA: hda/ca0132: add quirk for EVGA X299 DARK
  ASoC: soc-pcm: test if a BE can be prepared
  ASoC: rt5682: Disable jack detection interrupt during suspend
  ASoC: lpass: Fix for KASAN use_after_free out of bounds

Merge tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Nothing special to report just a few small fixes"

* tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain
  platform/x86: ISST: Remove 8 socket limit
  platform/mellanox: mlxbf-pmc: fix sscanf() error checking
  platform/x86/amd/pmf: Fix CnQF and auto-mode after resume
  platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0

Pull m68k fix from Geert Uytterhoeven:

 - Fix signal frame issue causing user-space crashes on 68020/68030

* tag 'm68k-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Move signal frame following exception on 68020/030