Merge tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire updates from Takashi Sakamoto:
 "During the development period of v6.8 kernel, it became evident that
  there was a lack of helper utilities to trace the initial state of
  bus, while investigating certain PHYs compliant with different
  versions of IEEE 1394 specification.

  This series of changes includes the addition of tracepoints events,
  provided by 'firewire' subsystem. These events enable tracing of how
  firewire core functions during bus reset and asynchronous
  communication over IEEE 1394 bus.

  When implementing the tracepoints events, it was found that the
  existing serialization and deserialization helpers for several types
  of asynchronous packets are scattered across both firewire-core and
  firewire-ohci kernel modules. A set of inline functions is newly added
  to address it, along with some KUnit tests, serving as the foundation
  for the tracepoints events. This renders the dispersed code obsolete.

  The remaining changes constitute the final steps in phasing out the
  usage of deprecated PCI MSI APIs, in continuation from the previous
  version"

* tag 'firewire-updates-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (29 commits)
  firewire: obsolete usage of *-objs in Makefile for KUnit test
  firewire: core: remove flag and width from u64 formats of tracepoints events
  firewire: core: fix type of timestamp for async_inbound_template tracepoints events
  firewire: core: add tracepoint event for handling bus reset
  Revert "firewire: core: option to log bus reset initiation"
  firewire: core: add tracepoints events for initiating bus reset
  firewire: ohci: obsolete OHCI_PARAM_DEBUG_BUSRESETS from debug module parameter
  firewire: ohci: add bus-reset event for initial set of handled irq
  firewire: core: add tracepoints event for asynchronous inbound phy packet
  firewire: core/cdev: add tracepoints events for asynchronous phy packet
  firewire: core: add tracepoints events for asynchronous outbound response
  firewire: core: add tracepoint event for asynchronous inbound request
  firewire: core: add tracepoints event for asynchronous inbound response
  firewire: core: add tracepoints events for asynchronous outbound request
  firewire: core: add support for Linux kernel tracepoints
  firewire: core: replace local macros with common inline functions for isochronous packet header
  firewire: core: add common macro to serialize/deserialize isochronous packet header
  firewire: core: obsolete tcode check macros with inline functions
  firewire: ohci: replace hard-coded values with common macros
  firewire: ohci: replace hard-coded values with inline functions for asynchronous packet header
  ...

Merge tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Add a dm-crypt optional "high_priority" flag that enables the crypt
   workqueues to use WQ_HIGHPRI.

 - Export dm-crypt workqueues via sysfs (by enabling WQ_SYSFS) to allow
   for improved visibility and controls over IO and crypt workqueues.

 - Fix dm-crypt to no longer constrain max_segment_size to PAGE_SIZE.
   This limit isn't needed given that the block core provides late bio
   splitting if bio exceeds underlying limits (e.g. max_segment_size).

 - Fix dm-crypt crypt_queue's use of WQ_UNBOUND to not use
   WQ_CPU_INTENSIVE because it is meaningless with WQ_UNBOUND.

 - Fix various issues with dm-delay target (ranging from a resource
   teardown fix, a fix for hung task when using kthread mode, and other
   improvements that followed from code inspection).

* tag 'for-6.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-delay: remove timer_lock
  dm-delay: change locking to avoid contention
  dm-delay: fix max_delay calculations
  dm-delay: fix hung task introduced by kthread mode
  dm-delay: fix workqueue delay_timer race
  dm-crypt: don't set WQ_CPU_INTENSIVE for WQ_UNBOUND crypt_queue
  dm: use queue_limits_set
  dm-crypt: stop constraining max_segment_size to PAGE_SIZE
  dm-crypt: export sysfs of all workqueues
  dm-crypt: add the optional "high_priority" flag

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).

  The major update (which causes a conflict with block, see below) is
  Christoph removing the queue limits and their associated block
  helpers.

  The remaining patches are assorted minor fixes and deprecated function
  updates plus a bit of constification"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: mpi3mr: Sanitise num_phys
  scsi: lpfc: Copyright updates for 14.4.0.2 patches
  scsi: lpfc: Update lpfc version to 14.4.0.2
  scsi: lpfc: Add support for 32 byte CDBs
  scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
  scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
  scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
  scsi: lpfc: Update logging of protection type for T10 DIF I/O
  scsi: lpfc: Change default logging level for unsolicited CT MIB commands
  scsi: target: Remove unused list 'device_list'
  scsi: iscsi: Remove unused list 'connlist_err'
  scsi: ufs: exynos: Add support for Tensor gs101 SoC
  scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
  scsi: ufs: exynos: Allow max frequencies up to 267Mhz
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
  scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  scsi: ufs: dt-bindings: exynos: Add gs101 compatible
  scsi: qla2xxx: Fix debugfs output for fw_resource_count
  scsi: qedf: Ensure the copied buf is NUL terminated
  scsi: bfa: Ensure the copied buf is NUL terminated
  ...

Pull ata updates from Damien Le Moal:

 - Convert the bindings for the imx-pata and ahci-da850 drivers to DT
   schemas (from Animesh)

 - Correct the code to handle HAS_IOPORT dependencies and conditionally
   compile drivers as needed (from Niklas)

 - Correct the legacy_exit() function in the pata_legacy driver to
   properly handle cleanups on driver exit (from Sergey)

 - Small code simplification removing the ata_exec_internal_sg()
   function and folding it into its only caller (from me)

* tag 'ata-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: pata_legacy: make legacy_exit() work again
  ata: libata-core: Remove ata_exec_internal_sg()
  ata: add HAS_IOPORT dependencies
  dt-bindings: ata: ahci-da850: Convert to dtschema
  dt-bindings: ata: imx-pata: Convert to dtschema

Pull fsverity update from Eric Biggers:
 "Fix a false positive kmemleak warning"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  fsverity: use register_sysctl_init() to avoid kmemleak warning

Pull fscrypt update from Eric Biggers:
 "Improve the performance of opening unencrypted files on filesystems
  that support fscrypt"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: try to avoid refing parent dentry in fscrypt_file_open

Pull orangefs update from Mike Marshall:
 "Fix out-of-bounds fsid access.

  Small fix to quiet warnings from string fortification helpers,
  suggested by Arnd Bergmann"

* tag 'for-linus-6.10-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: fix out-of-bounds fsid access

Pull gfs2 updates from Andreas Gruenbacher:

 - Properly fix the glock shrinker this time: it broke in commit "gfs2:
   Make glock lru list scanning safer" and commit "gfs2: fix glock
   shrinker ref issues" wasn't actually enough to fix it

 - On unmount, keep glocks around long enough that no more dlm callbacks
   can occur on them

 - Some more folio conversion patches from Matthew Wilcox

 - Lots of other smaller fixes and cleanups

* tag 'gfs2-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (27 commits)
  gfs2: make timeout values more explicit
  gfs2: Convert gfs2_aspace_writepage() to use a folio
  gfs2: Add a migrate_folio operation for journalled files
  gfs2: Simplify gfs2_read_super
  gfs2: Convert gfs2_page_mkwrite() to use a folio
  gfs2: gfs2_freeze_unlock cleanup
  gfs2: Remove and replace gfs2_glock_queue_work
  gfs2: do_xmote fixes
  gfs2: finish_xmote cleanup
  gfs2: Unlock fewer glocks on unmount
  gfs2: Fix potential glock use-after-free on unmount
  gfs2: Remove ill-placed consistency check
  gfs2: Fix lru_count accounting
  gfs2: Fix "Make glock lru list scanning safer"
  Revert "gfs2: fix glock shrinker ref issues"
  gfs2: Fix "ignore unlock failures after withdraw"
  gfs2: Get rid of unnecessary test_and_set_bit
  gfs2: Don't set GLF_LOCK in gfs2_dispose_glock_lru
  gfs2: Replace gfs2_glock_queue_put with gfs2_glock_put_async
  gfs2: Get rid of gfs2_glock_queue_put in signal_our_withdraw
  ...

Pull dlm updates from David Teigland:
 "This set includes some small fixes, and some big internal changes:

   - Fix a long standing race between the unlock callback for the last
     lkb struct, and removing the rsb that became unused after the final
     unlock. This could lead different nodes to inconsistent info about
     the rsb master node.

   - Remove unnecessary refcounting on callback structs, returning to
     the way things were done in the past.

   - Do message processing in softirq context. This allows dlm messages
     to be cleared more quickly and efficiently, reducing long lists of
     incomplete requests. A future change to run callbacks directly from
     this context will make this more effective.

   - The softirq message processing involved a number of patches
     changing mutexes to spinlocks and rwlocks, and a fair amount of
     code re-org in preparation.

   - Use an rhashtable for rsb structs, rather than our old internal
     hash table implementation. This also required some re-org of lists
     and locks preparation for the change.

   - Drop the dlm_scand kthread, and use timers to clear unused rsb
     structs. Scanning all rsb's periodically was a lot of wasted work.

   - Fix recent regression in logic for copying LVB data in user space
     lock requests"

* tag 'dlm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (34 commits)
  dlm: return -ENOMEM if ls_recover_buf fails
  dlm: fix sleep in atomic context
  dlm: use rwlock for lkbidr
  dlm: use rwlock for rsb hash table
  dlm: drop dlm_scand kthread and use timers
  dlm: do not use ref counts for rsb in the toss state
  dlm: switch to use rhashtable for rsbs
  dlm: add rsb lists for iteration
  dlm: merge toss and keep hash table lists into one list
  dlm: change to single hashtable lock
  dlm: increment ls_count for dlm_scand
  dlm: do message processing in softirq context
  dlm: use spin_lock_bh for message processing
  dlm: remove schedule in receive path
  dlm: convert ls_recv_active from rw_semaphore to rwlock
  dlm: avoid blocking receive at the end of recovery
  dlm: convert res_lock to spinlock
  dlm: convert ls_waiters_mutex to spinlock
  dlm: drop mutex use in waiters recovery
  dlm: add new struct to save position in dlm_copy_master_names
  ...

Pull btrfs updates from David Sterba:
 "This update brings a few minor performance improvements, otherwise
  there's a lot of refactoring, cleanups and other sort of not user
  visible changes.

  Performance improvements:

   - inline b-tree locking functions, improvement in metadata-heavy
     changes

   - relax locking on a range that's being reflinked, allows read
     operations to run in parallel

   - speed up NOCOW write checks (throughput +9% on a sample test)

   - extent locking ranges have been reduced in several places, namely
     around delayed ref processing

  Core:

   - more page to folio conversions:
      - relocation
      - send
      - compression
      - inline extent handling
      - super block write and wait

   - extent_map structure optimizations:
      - reduced structure size
      - code simplifications
      - add shrinker for allocated objects, the numbers can go high and
        could exhaust memory on smaller systems (reported) as they may
        not get an opportunity to be freed fast enough

   - extent locking optimizations:
      - reduce locking ranges where it does not seem to be necessary and
        are safe due to other means of synchronization
      - potential improvements due to lower contention,
        allocation/freeing and state management operations of extent
        state tracking structures

   - delayed ref cleanups and simplifications

   - updated trace points

   - improved error handling, warnings and assertions

   - cleanups and refactoring, unification of error handling paths"

* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (122 commits)
  btrfs: qgroup: fix initialization of auto inherit array
  btrfs: count super block write errors in device instead of tracking folio error state
  btrfs: use the folio iterator in btrfs_end_super_write()
  btrfs: convert super block writes to folio in write_dev_supers()
  btrfs: convert super block writes to folio in wait_dev_supers()
  bio: Export bio_add_folio_nofail to modules
  btrfs: remove duplicate included header from fs.h
  btrfs: add a cached state to extent_clear_unlock_delalloc
  btrfs: push extent lock down in submit_one_async_extent
  btrfs: push lock_extent down in cow_file_range()
  btrfs: move can_cow_file_range_inline() outside of the extent lock
  btrfs: push lock_extent into cow_file_range_inline
  btrfs: push extent lock into cow_file_range
  btrfs: push extent lock into run_delalloc_cow
  btrfs: remove unlock_extent from run_delalloc_compressed
  btrfs: push extent lock down in run_delalloc_nocow
  btrfs: adjust while loop condition in run_delalloc_nocow
  btrfs: push extent lock into run_delalloc_nocow
  btrfs: push the extent lock into btrfs_run_delalloc_range
  btrfs: lock extent when doing inline extent in compression
  ...

Pull erofs updates from Gao Xiang:
 "The LZ4 global buffer count is now configurable instead of the
  previous per-CPU buffers, which is useful for bare metals with
  hundreds of CPUs. A reserved buffer pool for LZ4 decompression can
  also be enabled to minimize the tail allocation latencies under the
  low memory scenarios with heavy memory pressure.

  In addition, Zstandard algorithm is now supported as an alternative
  since it has been requested by users for a while.

  There are some random cleanups as usual.

  Summary:

   - Make LZ4 global buffers configurable instead of per-CPU buffers

   - Add a reserved buffer pool for LZ4 decompression for lower latencies

   - Support Zstandard compression algorithm as an alternative

   - Derive fsid from on-disk UUID for .statfs() if possible

   - Minor cleanups"

* tag 'erofs-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: Zstandard compression support
  erofs: clean up z_erofs_load_full_lcluster()
  erofs: derive fsid from on-disk UUID for .statfs() if possible
  erofs: add a reserved buffer pool for lz4 decompression
  erofs: do not use pagepool in z_erofs_gbuf_growsize()
  erofs: rename per-CPU buffers to global buffer pool and make it configurable
  erofs: rename utils.c to zutil.c

Pull EFI updates from Ard Biesheuvel:
 "Only a handful of changes this cycle, consisting of cleanup work and a
  low-prio bugfix:

   - Additional cleanup by Tim for the efivarfs variable name length
     confusion

   - Avoid freeing a bogus pointer when virtual remapping is omitted in
     the EFI boot stub"

* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: libstub: only free priv.runtime_map when allocated
  efi: Clear up misconceptions about a maximum variable name size
  efivarfs: Remove unused internal struct members
  Documentation: Mark the 'efivars' sysfs interface as removed
  efi: pstore: Request at most 512 bytes for variable names

Pull HID updates from Jiri Kosina:

 - Firmware loading from host support in intel-ish driver, needed to
   support Lunar Lake and later (Zhang Lixu)

 - updates to HID-BPF infrastructure, with some of the specific fixes
   (e.g. rdesc fixups) abstracted into separate BPF programs for
   consumption from libevdev/udev-hid-bpf (Benjamin Tissoires)

 - support for Deck IMU in hid-steam (Max Maisel)

 - fixes for better support of 3rd party playstation DS4 controllers
   (Max Staudt)

 - support for missing mappings and codes from HUT 1.5 in hid-debug
   (Thomas Kuehne)

 - initial support for ROG Ally and ROG X13 devices (Luke D. Jones)

 - full support for WinWing Orion2 (Ivan Gorinov)

* tag 'hid-for-linus-2024051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (74 commits)
  selftests/hid: skip tests with HID-BPF if udev-hid-bpf is not installed
  selftests/hid: add tests for the Raptor Mach 2 joystick
  selftests/hid: move the gamepads definitions in the test file
  selftests/hid: import base_gamepad.py from hid-tools
  selftests/hid: add Huion Kamvas Pro 19 tests
  selftests/hid: tablets: also check for XP-Pen offset correction
  selftests/hid: tablets: add a couple of XP-PEN tablets
  selftests/hid: tablets: reduce the number of pen state
  selftests/hid: add support for HID-BPF pre-loading before starting a test
  selftests/hid: import base_device.py from hid-tools
  HID: bpf: add in-tree HID-BPF fix for the Raptor Mach 2
  HID: bpf: add in-tree HID-BPF fix for the Huion Kamvas Pro 19
  HID: bpf: add in-tree HID-BPF fix for the XBox Elite 2 over Bluetooth
  HID: bpf: add in-tree HID-BPF fix for the Wacom ArtPen
  HID: bpf: add in-tree HID-BPF fix for the IOGear Kaliber Gaming MMOmentum mouse
  HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter Mouse
  HID: bpf: add in-tree HID-BPF fix for the XPPen Artist 16
  HID: bpf: add first in-tree HID-BPF fix for the XPPen Artist 24
  HID: do not assume HAT Switch logical max < 8
  HID: amd_sfh: Use amd_get_c2p_val() to read C2P register
  ...

Pull gpio updates from Bartosz Golaszewski
 "This was a quiet release cycle for the GPIO tree and so this
  pull-request is relatively small.

  We have one new driver, some minor improvements to the GPIO core code
  and across several drivers, some DT and documentation updates but in
  general nothing stands out or is controversial. All changes have spent
  time in next with no reported issues (or ones that were quickly
  fixed).

  GPIO core:
   - remove more unused legacy interfaces (after converting the last
     remaining users to better alternatives)
   - update kerneldocs
   - improve error handling and log messages in GPIO ACPI code
   - remove dead code (always true checks) from GPIOLIB

  New drivers:
   - add a driver for Intel Granite Rapids-D vGPIO

  Driver improvements:
   - use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
   - provide an ID table for gpio-cros-ec to avoid a driver name
     fallback check
   - add support for gpio-ranges for GPIO drivers supporting multiple
     GPIO banks
   - switch to using dynamic GPIO base in gpio-brcmstb
   - fix irq handling in gpio-npcm-sgpio
   - switch to memory mapped IO accessors in gpio-sch

  DT bindings:
   - add support for gpio-ranges to gpio-brcmstb
   - add support for a new model and the gpio-line-names property to
     gpio-mpfs

  Documentation:
   - replace leading tabs with spaces in code blocks
   - fix typos"

* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
  gpio: nuvoton: Fix sgpio irq handle error
  gpiolib: Discourage to use formatting strings in line names
  gpio: brcmstb: add support for gpio-ranges
  gpio: of: support gpio-ranges for multiple gpiochip devices
  dt-bindings: gpio: brcmstb: add gpio-ranges
  gpio: Add Intel Granite Rapids-D vGPIO driver
  gpio: brcmstb: Use dynamic GPIO base numbers
  gpiolib: acpi: Set label for IRQ only lines
  gpiolib: acpi: Add fwnode name to the GPIO interrupt label
  gpiolib: Get rid of never false gpio_is_valid() calls
  gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
  gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
  gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
  gpiolib: acpi: Extract __acpi_find_gpio() helper
  gpio: sch: Utilise temporary variable for struct device
  gpio: sch: Switch to memory mapped IO accessors
  gpio: regmap: Use -ENOTSUPP consistently
  gpio: pcie-idio-24: Use -ENOTSUPP consistently
  Documentation: gpio: Replace leading TABs by spaces in code blocks
  gpiolib: acpi: Check for errors first in acpi_find_gpio()
  ...

Pull pwm updates from Uwe Kleine-König:
 "Apart for the normal updates for dt bindings, cleanups and support for
  new device variants to existing drivers this completes the conversion
  to pwmchip_alloc() which was started in the v6.9 development cycle.

  Using pwmchip_alloc() is a precondition to the character device
  support which allows easier and faster access to PWM devices. However
  there are some issues I want to clean up before including it in
  mainline, so this isn't contained here despite it was in next for some
  time.

  Thanks to Alexandre Mergnat, Binbin Zhou, Dmitry Rokosov, George
  Stark, Jerome Brunet and Varshini Rajendran for their contributions.
  Further thanks go to AngeloGioacchino Del Regno, Conor Dooley, David
  Lechner, Fabrice Gasnier, Florian Fainelli, Guenter Roeck, Gustavo A.
  R. Silva, Krzysztof Kozlowski and Rob Herring for valuable patch
  review"

* tag 'pwm/for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (34 commits)
  pwm: pca9685: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  dt-bindings: pwm: snps,dw-apb-timers: Do not require pwm-cells twice
  dt-bindings: pwm: mediatek,pwm-disp: Do not require pwm-cells twice
  dt-bindings: pwm: mediatek,mt2712: Do not require pwm-cells twice
  dt-bindings: pwm: marvell,pxa: Do not require pwm-cells twice
  dt-bindings: pwm: google,cros-ec: Do not require pwm-cells twice
  dt-bindings: pwm: bcm2835: Do not require pwm-cells twice
  pwm: meson: Use mul_u64_u64_div_u64() for frequency calculating
  pwm: meson: Add check for error from clk_round_rate()
  pwm: meson: Drop unneeded check in .get_state()
  dt-bindings: pwm: mediatek,pwm-disp: add compatible for mt8365 SoC
  pwm: meson: Add generic compatible for meson8 to sm1
  pwm: bcm2835: Drop open coded variant of devm_clk_rate_exclusive_get()
  pwm: bcm2835: Introduce a local variable for &pdev->dev
  pwm: stm32: Calculate prescaler with a division instead of a loop
  pwm: stm32: Fix for settings using period > UINT32_MAX
  pwm: stm32: Improve precision of calculation in .apply()
  pwm: stm32: Add error messages in .probe()'s error paths
  pwm: Make pwmchip_[sg]et_drvdata() a wrapper around dev_set_drvdata()
  pwm: Don't check pointer for being non-NULL after use
  ...

Pull hte/timestamp update from Dipen Patel:

 - Improve hte-test driver platform remove callback by replacing it with
   the remove_new which returns void instead

* tag 'for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux:
  hte: tegra-194: Convert to platform remove callback returning void

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Infineon XDP710

   - EC Chip driver for Lenovo ThinkStation motherboards

   - Analog Devices ADP1050

  Improved support for existing drivers:

   - emc1403: Convert to with_info API; Support for EMC1428 and EMC1438

   - nzxt-kraken3: Support for NZXT Kraken 2023

   - aquacomputer_d5next: Support for Octo flow sensors

   - pmbus/adm1275: Support for ADM1281

   - dell-smm: Supportt for Precision 7540 and G5 5505

  Other notable cleanup:

   - max6639: Use regmap

   - Remove unused structure fields from multiple drivers

   - Drop explicit initialization of struct i2c_device_id::driver_data
     to zero

   - Improve configuration mode handling in it87 driver

   - jc42: Drop support for I2C_CLASS_SPD

   - Various conversions to devicetree schema

   - Add HAS_IOPORT dependencies as needed

  Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach,
  pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers"

* tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits)
  hwmon: (nzxt-kraken3) Bail out for unsupported device variants
  hwmon: (emc1403) Add support for EMC1428 and EMC1438.
  hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2)
  hwmon: (emc1403) Add support for conversion interval configuration
  hwmon: (emc1403) Support 11 bit accuracy
  hwmon: (emc1403) Convert to with_info API
  hwmon: (max6639) Use regmap
  hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device
  hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device
  hwmon: (stts751) Remove an unused field in struct stts751_priv
  hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  hwmon: (max31790) revise the scale to write pwm
  hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models
  hwmon: (nzxt-kraken3) Decouple device names from kinds
  hwmon: (it87) Remove tests nolonger required
  hwmon: (it87) Test for chipset before entering configuration mode
  hwmon: (it87) Do not enter configuration mode for some chiptypes
  hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement
  hwmon: (pmbus) Add support for Infineon XDP710
  dt-bindings: hwmon: Add infineon xdp710 driver bindings
  ...

Pull spi updates from Mark Brown:
 "The diffstat for this release is dominated by the new Airoha driver,
  mainly as a result of this being a generally quite quiet release.
  There were a couple of cleanups in the core but nothing substantial,
  the updates here are almost all driver specific ones.

   - Support for multi-word mode in the OMAP2 McSPI driver

   - Overhaul of the PXA2xx driver, mostly API updates

   - A number of DT binding conversions

   - Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
     EYEQ5 and Renesas R8A779H0"

* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: dw: Bail out early on unsupported target mode
  spi: Remove unneded check for orig_nents
  MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
  spi: pxa2xx: Drop the stale entry in documentation TOC
  spi: pxa2xx: Don't provide struct chip_data for others
  spi: pxa2xx: Remove timeout field from struct chip_data
  spi: pxa2xx: Remove DMA parameters from struct chip_data
  spi: pxa2xx: Drop struct pxa2xx_spi_chip
  spi: pxa2xx: Don't use "proxy" headers
  spi: pxa2xx: Remove outdated documentation
  spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
  spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
  spi: pxa2xx: Allow number of chip select pins to be read from property
  spi: dt-bindings: ti,qspi: convert to dtschema
  spi: bitbang: Add missing MODULE_DESCRIPTION()
  spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
  spi: dw: Drop default number of CS setting
  spi: dw: Convert dw_spi::num_cs to u32
  spi: dw: Add a number of native CS auto-detection
  spi: dw: Convert to using BITS_TO_BYTES() macro
  ...

Pull regulator updates from Mark Brown:
 "There's one API update here, a new API factoring out a common pattern
  for reference voltage supplies. These are supplies used as a reference
  by analogue circuits where the consumer requests and enables the
  supply, reads the voltage to calibrate the user and then never touches
  it again. This is factored out into a single operation which just
  returns the voltage and uses devm_ to manage the request and enable
  portion.

  Otherwise this has been a very quiet release, we've got some new
  device support, some small fixes, housekeeping and cleanup work but
  nothing substantial.

  There's also some non-regulator changes in here, a number of users for
  the new reference voltage API were merged along with it and some MFD
  changes were pulled in as dependencies for new driver work.

  Highlights:

   - Add a new API for single operation handling of reference voltages

   - Support for Allwinner AXP717 and D1, and NXP PCA9561A"

* tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits)
  regulator: sun20i: Add Allwinner D1 LDOs driver
  regulator: dt-bindings: Add Allwinner D1 system LDOs
  regulator: Mention regulator id in error message about dummy supplies
  staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage()
  iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
  iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()
  hwmon: (adc128d818) simplify final return in probe
  regulator: devres: fix devm_regulator_get_enable_read_voltage() return
  hwmon: (da9052) Use devm_regulator_get_enable_read_voltage()
  hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage()
  regulator: devres: add API for reference voltage supplies
  regulator: rtq2208: Fix LDO discharge register and add vsel setting
  regulator: dt-bindings: fixed-regulator: Add a preferred node name
  regulator: axp20x: add support for the AXP717
  mfd: axp20x: Add support for AXP717 PMIC
  dt-bindings: mfd: x-powers,axp152: Document AXP717
  regulator: axp20x: fix typo-ed identifier
  dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible
  regulator: pca9450: add pca9451a support
  regulator: dt-bindings: pca9450: add pca9451a support
  ...

Pull regmap updates from Mark Brown:
 "Other than a few cleanups the changes here are all in the KUnit tests,
  Richard Fitzgerald sent some bug fixes during the v6.9 cycle and while
  adding test coverage for the issues fixed did some fairly substantial
  improvements, both cleaning up the framework and building out the
  coverage"

* tag 'regmap-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Reorder fields in 'struct regmap_config' to save some memory
  regmap: kunit: Fix an NULL vs IS_ERR() check
  regmap: spi: Add missing MODULE_DESCRIPTION()
  regmap: Drop capitalisation in MODULE_DESCRIPTION()
  regmap: kunit: Add test cases for regmap_read_bypassed()
  regmap: kunit: Add cache-drop test with multiple cache blocks
  regmap: kunit: Replace a kmalloc/kfree() pair with KUnit-managed alloc
  regmap: kunit: Use a KUnit action to call regmap_exit()
  regmap: kunit: Add more cache-sync tests
  regmap: kunit: Add more cache-drop tests
  regmap: kunit: Run non-sparse cache tests at non-zero register addresses
  regmap: kunit: Run sparse cache tests at non-zero register addresses
  regmap: kunit: Introduce struct for test case parameters
  regmap: kunit: Create a struct device for the regmap
  regmap: kunit: Fix warnings of implicit casts to __le16 and __be16
  regmap: maple: Remove second semicolon

Pull ACPI updates from Rafael Wysocki:
 "These are ACPICA updates coming from the 20240322 release upstream, an
  ACPI DPTF driver update adding new platform support for it, some new
  quirks and some assorted fixes and cleanups.

  Specifics:

   - Add EINJ CXL error types to actbl1.h (Ben Cheatham)

   - Add support for RAS2 table to ACPICA (Shiju Jose)

   - Fix various spelling mistakes in text files and code comments in
     ACPICA (Colin Ian King)

   - Fix spelling and typos in ACPICA (Saket Dumbre)

   - Modify ACPI_OBJECT_COMMON_HEADER (lijun)

   - Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu)

   - Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam)

   - Add missin increment of registered GPE count to ACPICA (Daniil
     Tatianin)

   - Mark new ACPICA release 20240322 (Saket Dumbre)

   - Add support for the AEST V2 table to ACPICA (Ruidong Tian)

   - Disable -Wstringop-truncation for some ACPICA code in the kernel to
     avoid a compiler warning that is not very useful (Arnd Bergmann)

   - Make the kernel indicate support for several ACPI features that are
     in fact supported to the platform firmware through _OSC and fix the
     Generic Initiator Affinity _OSC bit (Armin Wolf)

   - Make the ACPI core set the owner value for ACPI drivers, drop the
     owner setting from a number of drivers and eliminate the owner
     field from struct acpi_driver (Krzysztof Kozlowski)

   - Rearrange fields in several structures to effectively eliminate
     computations from container_of() in some cases (Andy Shevchenko)

   - Do some assorted cleanups of the ACPI device enumeration code (Andy
     Shevchenko)

   - Make the ACPI device enumeration code skip devices with _STA values
     clearly identified by the specification as invalid (Rafael Wysocki)

   - Rework the handling of the NHLT table to simplify and clarify it
     and drop some obsolete pieces (Cezary Rojewski)

   - Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV,
     TongFang GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter
     Schafranek, Tamim Khan, Christoffer Sandberg)

   - Add reference to UEFI DSD Guide to the documentation related to the
     ACPI handling of device properties (Sakari Ailus)

   - Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
     lefover architecture-dependent code from the ACPI NUMA handling
     code and simplify it on top of that (Robert Richter)

   - Add a num-cs device property to specify the number of chip selects
     for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
     nested CONFIG_PM #ifdef from it (Andy Shevchenko)

   - Move three x86-specific ACPI files to the x86 directory (Andy
     Shevchenko)

   - Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
     PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede)

   - Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
     Sathyanarayanan)

   - Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar)

   - Mark the einj_driver driver's remove callback as __exit because it
     cannot get unbound via sysfs (Uwe Kleine-König)

   - Fix a typo in the ACPI documentation regarding the layout of sysfs
     subdirectory representing the ACPI namespace (John Watts)

   - Make the ACPI pfrut utility print the update_cap field during
     capability query (Chen Yu)

   - Add HAS_IOPORT dependencies to PNP (Niklas Schnelle)"

* tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
  ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
  ACPI/NUMA: Remove architecture dependent remainings
  x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
  ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7
  ACPI: scan: Avoid enumerating devices with clearly invalid _STA values
  ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
  ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV
  ACPICA: AEST: Add support for the AEST V2 table
  ACPI: tools: pfrut: Print the update_cap field during capability query
  ACPI: property: Add reference to UEFI DSD Guide
  Documentation: firmware-guide: ACPI: Fix namespace typo
  PNP: add HAS_IOPORT dependencies
  ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx
  ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23)
  ACPICA: Update acpixf.h for new ACPICA release 20240322
  ACPICA: events/evgpeinit: don't forget to increment registered GPE count
  ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table
  ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure
  ACPICA: SRAT: Add RISC-V RINTC affinity structure
  ...

Pull power management updates from Rafael Wysocki:
 "These are mostly cpufreq updates, including a significant intel-pstate
  driver update and several amd-pstate improvements plus some updates of
  ARM cpufreq drivers, general fixes and cleanups.

  Also included are changes related to system sleep, power capping
  updates adding support for a new platform and a new hardware feature
  (among other things), a Samsung exynos-asv driver update allowing it
  to change its Energy Model after adjusting voltage, minor cpuidle and
  devfreq updates and a small documentation cleanup.

  Specifics:

   - Rework the handling of disabled turbo in the intel_pstate driver
     and make it update the maximum CPU frequency consistently
     regardless of the reason on top of a number of cleanups (Rafael
     Wysocki)

   - Add missing checks for NULL .exit() cpufreq driver callback to the
     cpufreq core (Viresh Kumar)

   - Prevent pulicy->max from going above the frequency QoS maximum
     value when cpufreq_frequency_table_verify() is used (Xuewen Yan)

   - Prevent a negative CPU number or frequency value from being printed
     if they are really large (Joshua Yeong)

   - Update MAINTAINERS entry for amd-pstate to add two new
     submaintainers and a designated reviewer (Huang Rui)

   - Clean up the amd-pstate driver and update its documentation
     (Gautham Shenoy)

   - Fix the highest frequency issue in the amd-pstate driver which
     limits performance (Perry Yuan)

   - Enable CPPC v2 for certain processors in the family 17H, as
     requested by TR40 processor users who expect improved performance
     and lower system temperature (Perry Yuan)

   - Change latency and delay values to be read from platform firmware
     firstly for more accurate timing (Perry Yuan)

   - A new quirk is introduced for supporting amd-pstate on legacy
     processors which either lack CPPC capability, or only only have
     CPPC v2 capability (Perry Yuan)

   - Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
     general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
     Dan Carpenter, Viresh Kumar)

   - CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
     Mishin)

   - Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
     Shivani Gupta)

   - brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)

   - mediatek cpufreq: Add support for MT7988A (Sam Shih)

   - cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
     Fan)

   - Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
     cpufreq driver (Jeff Johnson)

   - Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)

   - Convert the cpuidle kirkwood driver to platform remove callback
     returning void (Yangtao Li)

   - Replace deprecated strncpy() with strscpy() in the hibernation core
     code (Justin Stitt)

   - Use %ps to simplify debug output in the core system-wide suspend
     and resume code (Len Brown)

   - Remove unnecessary else from device_init_wakeup() and make
     device_wakeup_disable() return void (Dhruva Gole)

   - Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)

   - Add support for ArrowLake-H platform to the Intel RAPL driver
     (Zhang Rui)

   - Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)

   - Make the Samsung exynos-asv driver update the Energy Model after
     adjusting voltage on top of some preliminary changes of the OPP and
     Enery Model generic code (Lukasz Luba)

   - Remove a reference to a function that has been dropped from the
     power management documentation (Bjorn Helgaas)

   - Convert the platfrom remove callback to .remove_new for the
     exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
     rk3399_dmc devfreq drivers (Uwe Kleine-König)

   - Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"

* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
  PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
  PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
  PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
  PM / devfreq: mtk-cci: Convert to platform remove callback returning void
  PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
  PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
  cpufreq: amd-pstate: fix the highest frequency issue which limits performance
  cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
  cpuidle: ladder: fix ladder_do_selection() kernel-doc
  powercap: intel_rapl_tpmi: Enable PMU support
  powercap: intel_rapl: Introduce APIs for PMU support
  PM: hibernate: replace deprecated strncpy() with strscpy()
  cpufreq: Fix up printing large CPU numbers and frequency values
  MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
  cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
  cpufreq: amd-pstate: fix code format problems
  cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
  cppc_acpi: print error message if CPPC is unsupported
  cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
  cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
  ...

Pull thermal control updates from Rafael Wysocki:
 "The most significant part of this is a rework of thermal governors,
  including a redesign of the thermal governor interface and changes to
  make some of them take trip point hysteresis into account properly, as
  well as some related cleanups of the thermal governors and thermal
  core.

  The above is based on preliminary changes refactoring thermal data
  structures and moving the definitions of some of them into the thermal
  core which also ensure that trip point crossing notifications will be
  sent to user space via netlink and recorded in the debug statistics in
  temperature order.

  In addition, netlink bind/unbind notifications are added to the
  thermal core and the Intel HFI driver is modified to use them to avoid
  sending netlink messages until there are subscribers.

  Apart from that, multiple thermal drivers are updated which includes
  new hardware support (MediaTek MT8188 and MT8186, Amlogic A1 thermal
  sensor, Loongson-2K2000, Lmh QCM2290), fixes, cleanups and
  documentation updates, and the recently added thermal debug code is
  fixed and cleaned up.

  Specifics:

   - Redesign the thermal governor interface to allow the governors to
     work in a more straightforward way (Rafael Wysocki)

   - Make thermal governors take the current trip point thresholds into
     account in their computations which allows trip hysteresis to be
     observed more accurately (Rafael Wysocki)

   - Make the thermal core manage passive polling for thermal zones and
     remove passive polling management from thermal governors (Rafael
     Wysocki)

   - Refactor trip point representation and move the definition of
     thermal governor and thermal zone device structures to the thermal
     core (Rafael Wysocki)

   - Sort trip point crossing notifications and debug recording of trip
     point crossing events by temperature (Rafael Wysocki)

   - Improve the handling of cooling device states and thermal
     mitigation episodes in progress in the thermal debug code (Rafael
     Wysocki)

   - Avoid excessive updates of trip point statistics and clean up the
     printing of thermal mitigation episode information (Rafael Wysocki)

   - Clean up thermal governors and thermal core (Rafael Wysocki)

   - Allow thermal drivers to register notifiers that will be invoked on
     netlink events like BIND and UNBIND, so that they can adjust their
     activity depending on whether or not there are any subscribers of
     netlink messages coming from them, and make the Intel HFI driver
     use this mechanism (Stanislaw Gruszka)

   - Adjust the update delay and capabilities-per-event values in the
     Intel HFI thermal driver to prevent it from missing events and
     allow it to process more data in one go (Ricardo Neri)

   - Add missing MODULE_DESCRIPTION() to multiple files in the
     int340x_thermal and intel_soc_dts_iosf drivers (Srinivas
     Pandruvada)

   - Replace deprecated strncpy() with strscpy() in the int340x_thermal
     driver (Justin Stitt)

   - Add QCM2290 compatible DT bindings for Lmh and fix a NULL pointer
     dereference in the lmh driver when the SCM is not present (Konrad
     Dybcio)

   - Use the strreplace() function instead of doing it manually in the
     Armada driver (Rasmus Villemoes)

   - Convert st,stih407-thermal to DT schema and fix up missing
     properties (Raphael Gallais-Pou)

   - Add suspend/resume by restoring the context of the tsens sensor
     (Priyansh Jain)

   - Support A1 SoC family Thermal Sensor controller and add the DT
     bindings (Dmitry Rokosov)

   - Improve the temperature approximation calculation and consolidate
     the Tj constant into a shared area of the structure instead of
     duplicating it on the Rcar Gen3 (Niklas Söderlund)

   - Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to
     support it correctly (Hsin-Te Yuan)

   - Fix a NULL pointer dereference in the tsens driver when the
     function compute_intercept_slope() is called with a NULL parameter
     (Aleksandr Mishin)

   - Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
     (Christophe Jaillet)

   - Fix up calibration efuse data decoding, consolidate the code by
     checking boundaries and refactor some part of the LVTS Mediatek
     driver. After setting the scene, add MT8186 and MT8188 along with
     the DT bindings (Nicolas Pitre)

   - Add Loongson-2K2000 support after some minor code adjustements and
     providing the DT bindings definition (Binbin Zhou)"

* tag 'thermal-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  thermal: intel: hfi: Increase the number of CPU capabilities per netlink event
  thermal: intel: hfi: Rename HFI_MAX_THERM_NOTIFY_COUNT
  thermal: intel: hfi: Shorten the thermal netlink event delay to 100ms
  thermal: intel: hfi: Rename HFI_UPDATE_INTERVAL
  thermal: intel: Add missing module description
  thermal: core: Move passive polling management to the core
  thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid
  thermal: trip: Add missing empty code line
  thermal/debugfs: Avoid printing zero duration for mitigation events in progress
  thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()
  thermal/debugfs: Create records for cdev states as they get used
  thermal: core: Introduce thermal_governor_trip_crossed()
  thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats
  thermal/debugfs: Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats()
  thermal/debugfs: Clean up thermal_debug_update_temp()
  thermal/debugfs: Avoid excessive updates of trip point statistics
  thermal: core: Relocate critical and hot trip handling
  thermal: core: Drop the .throttle() governor callback
  thermal: gov_user_space: Use .trip_crossed() instead of .throttle()
  thermal: gov_fair_share: Eliminate unnecessary integer divisions
  ...

Merge tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:

 - make framework and tests reporting KTAP compliant

 - make ktap_helpers and power_supply test POSIX compliant

 - add ksft_exit_fail_perror() to include errono in string form

 - avoid clang reporting false positive static analysis errors about
   functions that exit and never return. ksft_exit* functions are marked
   __noreturn to address this problem

 - add mechanism for reporting a KSFT_ result code

 - fix build warnings related missing headers and unused variables

 - fix clang build failures

 - cleanups to resctrl test

 - add host arch for LLVM builds

* tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (44 commits)
  selftests/sgx: Include KHDR_INCLUDES in Makefile
  selftests: Compile kselftest headers with -D_GNU_SOURCE
  selftests/resctrl: fix clang build warnings related to abs(), labs() calls
  selftests/ftrace: Fix checkbashisms errors
  selftests/ftrace: Fix BTFARG testcase to check fprobe is enabled correctly
  selftests/capabilities: fix warn_unused_result build warnings
  selftests: filesystems: add missing stddef header
  selftests: kselftest_deps: fix l5_test() empty variable
  selftests: default to host arch for LLVM builds
  selftests/resctrl: fix clang build failure: use LOCAL_HDRS
  selftests/binderfs: use the Makefile's rules, not Make's implicit rules
  Documentation: kselftest: fix codeblock
  selftests: kselftest: Make ksft_exit functions return void instead of int
  selftests: x86: ksft_exit_pass() does not return
  selftests: timers: ksft_exit functions do not return
  selftests: sync: ksft_exit_pass() does not return
  selftests/resctrl: ksft_exit_skip() does not return
  selftests: pidfd: ksft_exit functions do not return
  selftests/mm: ksft_exit functions do not return
  selftests: membarrier: ksft_exit_pass() does not return
  ...

Merge tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:

 - fix race condition in try-catch completion

 - change __kunit_test_suites_init() to exit early if there is
   nothing to test

 - change string-stream-test to use KUNIT_DEFINE_ACTION_WRAPPER

 - move fault tests behind KUNIT_FAULT_TEST Kconfig option

 - kthread test fixes and improvements

 - iov_iter test fixes

* tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: bail out early in __kunit_test_suites_init() if there are no suites to test
  kunit: string-stream-test: use KUNIT_DEFINE_ACTION_WRAPPER
  kunit: test: Move fault tests behind KUNIT_FAULT_TEST Kconfig option
  kunit: unregister the device on error
  kunit: Fix race condition in try-catch completion
  kunit: Add tests for fault
  kunit: Print last test location on fault
  kunit: Fix KUNIT_SUCCESS() calls in iov_iter tests
  kunit: Handle test faults
  kunit: Fix timeout message
  kunit: Fix kthread reference
  kunit: Handle thread creation error

Merge tag 'linux_kselftest-nolibc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull nolibc updates from Shuah Khan:

 - add support for uname(2)

 - remove open-coded strnlen()

 - export strlen()

 - add tests for strlcat() and strlcpy()

 - fix memory error in realloc()

 - fix strlcat() and strlcpy() return code and size usage

* tag 'linux_kselftest-nolibc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  tools/nolibc: add support for uname(2)
  tools/nolibc/string: remove open-coded strnlen()
  selftests/nolibc: Add tests for strlcat() and strlcpy()
  tools/nolibc: Fix strlcpy() return code and size usage
  tools/nolibc: Fix strlcat() return code and size usage
  tools/nolibc/string: export strlen()
  tools/nolibc/stdlib: fix memory error in realloc()

Pull OpenRISC updates from Stafford Horne:
 "A few cleanups and fixups from me:

   - Add a few missing relocations to fix module loading

   - Cleanup FPU state save and restore to be more efficient

   - Cleanups to traps handling and logging

   - Fix issue with poweroff being broken after recent power driver
     refactorings"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Move FPU state out of pt_regs
  openrisc: Add FPU config
  openrisc: traps: Don't send signals to kernel mode threads
  openrisc: traps: Remove calls to show_registers before die
  openrisc: traps: Convert printks to pr_<level> macros
  openrisc: Add support for more module relocations
  openrisc: Define openrisc relocation types
  openrisc: Use do_kernel_power_off()

Pull sh updates from John Paul Adrian Glaubitz:
 "The majority of improvements are coming from Geert Uytterhoeven who
  took the time to fix a total of 30 cases of "-Wmissing-prototypes"
  compiler warnings, either by adding a missing header include, defining
  the missing forward declarations or making the functions in question
  static.

  In the case of several DMA functions, the fix was to actually just
  remove them as they were added but never used. Another one of these
  warnings was eliminated by removing the left-over sh5 cache handling
  support, a change that was suggested by Yoshinori Sato and, finally,
  the last of these warnings was fixed by guarding the function
  setup_profiling_timer() with CONFIG_PROFILING.

  While at it, Geert also removed two unneeded casts to kprobe_opcode_t
  in the kprobes code.

  Another change was contributed by Guenter Roeck to fix errors that
  were reported during checksum unit tests. The fix actually reverts the
  older change cadc4e1a ("sh: Handle calling csum_partial with
  misaligned data") which turned to be incorrect. It remains to be
  investigated whether there is a better way to handle misaligned data
  in csum_partial().

  A small fix contributed by Krzysztof Kozlowski drops the incorrect SPI
  controller spi-max-frequency property in the device tree source file
  for the J2 device platform while Uwe Kleine-König converted the
  push-switch driver to have its callback function return void, a change
  that is currently being applied to all drivers throughout the kernel
  in order to avoid resource leaks.

  Last but not least, Artur Rojek has fixed the IOPORT base address for
  the Sega Dreamcast platform which allows the Linux kernel to be
  successfully booted on this once popular video game console for the
  first time since a long time ago"

* tag 'sh-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: (35 commits)
  sh: setup: Add missing forward declaration for sh_fdt_init()
  sh: smp: Protect setup_profiling_timer() by CONFIG_PROFILING
  sh: of-generic: Add missing #include <asm/clock.h>
  sh: dreamcast: Fix GAPS PCI bridge addressing
  sh: boot: Add proper forward declarations
  sh: boot: Remove sh5 cache handling
  Revert "sh: Handle calling csum_partial with misaligned data"
  sh: j2: Drop incorrect SPI controller spi-max-frequency property
  sh: push-switch: Convert to platform remove callback returning void
  sh: sh7785lcr: Make init_sh7785lcr_IRQ() static
  sh: sh7757: Add missing #include <asm/mmzone.h>
  sh: sh7757lcr: Make init_sh7757lcr_IRQ() static
  sh: mach-sh03: Make sh03_rtc_settimeofday() static
  sh: mach-highlander: Add missing #include <mach/highlander.h>
  sh: traps: Make is_dsp_inst() static
  sh: cache: Move forward declarations to <asm/cacheflush.h>
  sh: dma: Remove unused functionality
  sh: dwarf: Make dwarf_lookup_fde() static
  sh: kprobes: Remove unneeded kprobe_opcode_t casts
  sh: kprobes: Make trampoline_probe_handler() static
  ...

Pull arm64 updates from Will Deacon:
 "The most interesting parts are probably the mm changes from Ryan which
  optimise the creation of the linear mapping at boot and (separately)
  implement write-protect support for userfaultfd.

  Outside of our usual directories, the Kbuild-related changes under
  scripts/ have been acked by Masahiro whilst the drivers/acpi/ parts
  have been acked by Rafael and the addition of cpumask_any_and_but()
  has been acked by Yury.

  ACPI:

   - Support for the Firmware ACPI Control Structure (FACS) signature
     feature which is used to reboot out of hibernation on some systems

  Kbuild:

   - Support for building Flat Image Tree (FIT) images, where the kernel
     Image is compressed alongside a set of devicetree blobs

  Memory management:

   - Optimisation of our early page-table manipulation for creation of
     the linear mapping

   - Support for userfaultfd write protection, which brings along some
     nice cleanups to our handling of invalid but present ptes

   - Extend our use of range TLBI invalidation at EL1

  Perf and PMUs:

   - Ensure that the 'pmu->parent' pointer is correctly initialised by
     PMU drivers

   - Avoid allocating 'cpumask_t' types on the stack in some PMU drivers

   - Fix parsing of the CPU PMU "version" field in assembly code, as it
     doesn't follow the usual architectural rules

   - Add best-effort unwinding support for USER_STACKTRACE

   - Minor driver fixes and cleanups

  Selftests:

   - Minor cleanups to the arm64 selftests (missing NULL check, unused
     variable)

  Miscellaneous:

   - Add a command-line alias for disabling 32-bit application support

   - Add part number for Neoverse-V2 CPUs

   - Minor fixes and cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
  arm64/mm: Fix pud_user_accessible_page() for PGTABLE_LEVELS <= 2
  arm64/mm: Add uffd write-protect support
  arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG
  arm64/mm: Remove PTE_PROT_NONE bit
  arm64/mm: generalize PMD_PRESENT_INVALID for all levels
  arm64: simplify arch_static_branch/_jump function
  arm64: Add USER_STACKTRACE support
  arm64: Add the arm64.no32bit_el0 command line option
  drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
  drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
  drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
  kselftest: arm64: Add a null pointer check
  arm64: defer clearing DAIF.D
  arm64: assembler: update stale comment for disable_step_tsk
  arm64/sysreg: Update PIE permission encodings
  kselftest/arm64: Remove unused parameters in abi test
  perf/arm-spe: Assign parents for event_source device
  perf/arm-smmuv3: Assign parents for event_source device
  perf/arm-dsu: Assign parents for event_source device
  perf/arm-dmc620: Assign parents for event_source device
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Fix invalid context sleep and reboot hang on Mac

 - Fix spinlock race in kernel thread creation

 - Miscellaneous fixes and improvements

 - defconfig updates

* tag 'm68k-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.9-rc1
  m68k: Move ARCH_HAS_CPU_CACHE_ALIASING
  m68k: mac: Fix reboot hang on Mac IIci
  m68k: Fix spinlock race in kernel thread creation
  m68k: Let GENERIC_IOMAP depend on HAS_IOPORT
  m68k: amiga: Use str_plural() to fix Coccinelle warning
  macintosh/via-macii: Fix "BUG: sleeping function called from invalid context"
  zorro: Use helpers from ioport.h
  m68k: Calculate THREAD_SIZE from THREAD_SIZE_ORDER

Pull x86 interrupt handling updates from Thomas Gleixner:
 "Add support for posted interrupts on bare metal.

  Posted interrupts is a virtualization feature which allows to inject
  interrupts directly into a guest without host interaction. The VT-d
  interrupt remapping hardware sets the bit which corresponds to the
  interrupt vector in a vector bitmap which is either used to inject the
  interrupt directly into the guest via a virtualized APIC or in case
  that the guest is scheduled out provides a host side notification
  interrupt which informs the host that an interrupt has been marked
  pending in the bitmap.

  This can be utilized on bare metal for scenarios where multiple
  devices, e.g. NVME storage, raise interrupts with a high frequency. In
  the default mode these interrupts are handles independently and
  therefore require a full roundtrip of interrupt entry/exit.

  Utilizing posted interrupts this roundtrip overhead can be avoided by
  coalescing these interrupt entries to a single entry for the posted
  interrupt notification. The notification interrupt then demultiplexes
  the pending bits in a memory based bitmap and invokes the
  corresponding device specific handlers.

  Depending on the usage scenario and device utilization throughput
  improvements between 10% and 130% have been measured.

  As this is only relevant for high end servers with multiple device
  queues per CPU attached and counterproductive for situations where
  interrupts are arriving at distinct times, the functionality is opt-in
  via a kernel command line parameter"

* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Use existing helper for pending vector check
  iommu/vt-d: Enable posted mode for device MSIs
  iommu/vt-d: Make posted MSI an opt-in command line option
  x86/irq: Extend checks for pending vectors to posted interrupts
  x86/irq: Factor out common code for checking pending interrupts
  x86/irq: Install posted MSI notification handler
  x86/irq: Factor out handler invocation from common_interrupt()
  x86/irq: Set up per host CPU posted interrupt descriptors
  x86/irq: Reserve a per CPU IDT vector for posted MSIs
  x86/irq: Add a Kconfig option for posted MSI
  x86/irq: Remove bitfields in posted interrupt descriptor
  x86/irq: Unionize PID.PIR for 64bit access w/o casting
  KVM: VMX: Move posted interrupt descriptor out of VMX code

Pull interrupt subsystem updates from Thomas Gleixner:
 "Core code:

   - Interrupt storm detection for the lockup watchdog:

     Lockups which are caused by interrupt storms are not easy to debug
     because there is no information about the events which make the
     lockup detector trigger.

     To make this more user friendly, provide an extenstion to interrupt
     statistics which allows to take snapshots and an interface to
     retrieve the delta to the snapshot. Use this new mechanism in the
     watchdog code to do a two stage lockup analysis by taking the
     snapshot and printing the deltas for the topmost active interrupts
     on the second trigger.

     Note: This contains both the interrupt and the watchdog changes as
     the latter depend on the former obviously.

   - Avoid summation loops in the /proc/interrupts output and use the
     global counter when possible

   - Skip suspended interrupts on CPU hotplug operations to ensure that
     they are not delivered before the system resumes the device drivers
     when coming out of suspend.

   - On CPU hot-unplug interrupts which are affine to the outgoing CPU
     are migrated to a different CPU in the affinity mask. This can fail
     when the CPUs have no vectors left. Instead of giving up try to
     migrate it to any online CPU and thereby breaking the affinity
     setting in order to prevent a stale device interrupt which targets
     an offline CPU

   - The usual small cleanups

  Driver code:

   - Support for the RISCV AIA MSI controller

   - Make the interrupt allocation for the Loongson PCH controller more
     flexible to prevent vector exhaustion

   - The usual set of cleanups and fixes all over the place"

* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
  irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
  cpuidle: Avoid explicit cpumask allocation on stack
  irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
  irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
  irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
  irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
  irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
  cpumask: Introduce cpumask_first_and_and()
  irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
  genirq: Reuse irq_is_nmi()
  genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
  genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
  arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
  arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
  ARM: dts: stm32: List exti parent interrupts on stm32mp131
  ARM: dts: stm32: List exti parent interrupts on stm32mp151
  arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
  irqchip/stm32-exti: Mark events reserved with RIF configuration check
  irqchip/stm32-exti: Skip secure events
  irqchip/stm32-exti: Convert driver to standard PM
  ...

Pull x86 timers update from Thomas Gleixner:
 "A single update for the TSC synchronixation sanity checks:

  The sad state of TSC being notoriously non-sychronized for several
  decades caused the kernel to grow quite rigorous sanity checks to
  detect whether the TSC is valid to be used for timekeeping.

  The TSC ADJUST MSR provides the offset between the initial TSC value
  after hardware reset and later modifications. This allows to detect
  cases where firmware tampers with the TSC and also allows to correct
  the firmware induced damage by resetting the offset in a controlled
  way.

  The universal correct rule is that the TSC ADJUST value has to be
  consistent within all CPUs of a socket.

  The kernel further assumes that the TSC offset should be consistent
  between sockets. That's not really correct as systems with a huge
  number of sockets are not architecurally guaranteed to reset the per
  socket TSC base synchronously.

  In case that the per socket offset is not consistent the kernel resets
  it to the offset of the boot CPU and then does a synchronization check
  which corrects for the inter socket delays.

  That works most of the time, but it is suboptimal as the firmware has
  eventually better information about the per socket offset and on sane
  systems that offset should just work in the validation checks"

* tag 'x86-timers-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Trust initial offset in architectural TSC-adjust MSRs

Pull timers and timekeeping updates from Thomas Gleixner:
 "Core code:

   - Make timekeeping and VDSO time readouts resilent against math
     overflow:

     In guest context the kernel is prone to math overflow when the host
     defers the timer interrupt due to overload, malfunction or malice.

     This can be mitigated by checking the clocksource delta for the
     maximum deferrement which is readily available. If that value is
     exceeded then the code uses a slowpath function which can handle
     the multiplication overflow.

     This functionality is enabled unconditionally in the kernel, but
     made conditional in the VDSO code. The latter is conditional
     because it allows architectures to optimize the check so it is not
     causing performance regressions.

     On X86 this is achieved by reworking the existing check for
     negative TSC deltas as a negative delta obviously exceeds the
     maximum deferrement when it is evaluated as an unsigned value. That
     avoids two conditionals in the hotpath and allows to hide both the
     negative delta and the large delta handling in the same slow path.

   - Add an initial minimal ktime_t abstraction for Rust

   - The usual boring cleanups and enhancements

  Drivers:

   - Boring updates to device trees and trivial enhancements in various
     drivers"

* tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const
  clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer
  clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe
  clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
  dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
  rust: time: doc: Add missing C header links
  clocksource: Make the int help prompt unit readable in ncurses
  hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()
  timerqueue: Remove never used function timerqueue_node_expires()
  rust: time: Add Ktime
  vdso: Fix powerpc build U64_MAX undeclared error
  clockevents: Convert s[n]printf() to sysfs_emit()
  clocksource: Convert s[n]printf() to sysfs_emit()
  clocksource: Make watchdog and suspend-timing multiplication overflow safe
  timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow
  timekeeping: Make delta calculation overflow safe
  timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety
  timekeeping: Fold in timekeeping_delta_to_ns()
  timekeeping: Consolidate timekeeping helpers
  timekeeping: Refactor timekeeping helpers
  ...

Pull x86 APIC update from Dave Hansen:
 "Coccinelle complained about some 64-bit divisions, but the divisor was
  really just a 32-bit value being stored as 'unsigned long'.

  Fixing the types fixes the warning"

* tag 'x86_apic_for_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Improve data types to fix Coccinelle warnings

Pull x86 SEV updates from Borislav Petkov:

 - Small cleanups and improvements

* tag 'x86_sev_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Make the VMPL0 checking more straight forward
  x86/sev: Rename snp_init() in boot/compressed/sev.c
  x86/sev: Shorten struct name snp_secrets_page_layout to snp_secrets_page

Pull x86 microcode loader updates from Borislav Petkov:

 - Fix a clang-15 build warning and other cleanups

* tag 'x86_microcode_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Remove unused struct cpu_info_ctx
  x86/microcode/AMD: Remove unused PATCH_MAX_SIZE macro
  x86/microcode/AMD: Avoid -Wformat warning with clang-15

Pull x86 resource control updates from Borislav Petkov:

 - Add a tracepoint to read out LLC occupancy of resource monitor IDs
   with the goal of freeing them sooner rather than later

 - Other code improvements and cleanups

* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Add tracepoint for llc_occupancy tracking
  x86/resctrl: Rename pseudo_lock_event.h to trace.h
  x86/resctrl: Simplify call convention for MSR update functions
  x86/resctrl: Pass domain to target CPU

Pull x86 asm alternatives updates from Borislav Petkov:

 - Switch the in-place instruction patching which lead to at least one
   weird bug with 32-bit guests, seeing stale instruction bytes, to one
   working on a buffer, like the rest of the alternatives code does

 - Add a long overdue check to the X86_FEATURE flag modifying functions
   to warn when former get changed in a non-compatible way after
   alternatives have been patched because those changes will be already
   wrong

 - Other cleanups

* tag 'x86_alternatives_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Remove alternative_input_2()
  x86/alternatives: Sort local vars in apply_alternatives()
  x86/alternatives: Optimize optimize_nops()
  x86/alternatives: Get rid of __optimize_nops()
  x86/alternatives: Use a temporary buffer when optimizing NOPs
  x86/alternatives: Catch late X86_FEATURE modifiers

Pull RAS update from Borislav Petkov:

 - Change the fixed-size buffer for MCE records to a dynamically sized
   one based on the number of CPUs present in the system

* tag 'ras_core_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Dynamically size space for machine check records